Webdypro simple types are vanished with model reimport

Hi All,
My webdynpro project consists of user defined simple types and models(SAP ABAP). when i re-import model ( which already exists in project ) , all the simple types in my project are deleted and all my context mapping to particular simple types are showing compile time errors. I have to recreate all simple types and do context mapping again.
Any one can help me how can i solve this problem.
Thanks
Aravinda

Before re-import the model you have to preserve existing model biding in controller contexts. There are two things you should take care about.
1. In controller contexts all metamodel entity files should be deleted.
2. non-model-specific files should be readonly.
There is one blog on this, which describes <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2508">How To Reimport Web Service Models in Web Dynpro for Java</a> , although it tell you about web services but it applies for model reimports as well.
Regards,
Nitin

Similar Messages

Is it possible to edit Simple Type enum imported with a model?

I have a Simple Type enum which has been created from a model. Is it possible for me to edit the list in Web Dynpro as the 'Add' / 'Edit' button are greyed out?

Hi Adams
It is not possible to edit Simple Type enumeration imported from model.
if you want to use your own values under the list create your own SVS and pass those values to the model
Best Regards
Chaitanya.A

Integer Validation Simple Type

Hi to all
we have requirement that the value entered should be with in the range 0 to 9999
For this in webdynpro for java i tried to create a simple type of integer with minimum inclusive as 0 and maximum inclusive as 9999
but if we give say 99999 it gives valid message -- Value 99999 must be smaller than MaxExclusive 9999
if we give 23423423423423423423 it gives the java message integer range should be with in this range -2147483648 and +21...)
if we give decimal values it gives the same java message integer range should be with in this range
2147483648 and +21...)
For me
i should always be able to get this message Value 99999 must be smaller than MaxExclusive 9999 or
Value -1 must be greater than or the same as Minclusive 0
irrespective of the input
is there any way that i can have this kind of message
to conclude what ever the input i give it should give me message value should be with in the range 0 to 9999
could some one please help in this tricky requirement
Thanks in advance
Regards
Chandra

Saleem, the user is entering a numeric value, question is which data type it is, int/float/long/double
Chandra,
Value 1.1 is not an integer value or a long value. The data type is float.
when you converted it in a string, look for the indexof(.), and check the value of string after (.), it should not be greater than 0. If it is, the entered number is not an integer.
so it goes like this
string a = substring( string after " ." ) ;
int i = int value of a ;
if ( i > 0 ) "please enter an integer value " ;
else{ conver to lang and do remaining process }
Regards,
Nitin
Edited by: Nitin Mahajan on Jun 19, 2009 12:16 AM

NW 7.40: Cannot edit CAF simple type

Hi,
I've a CAF simple type "ApproverType".
In the past I was always able to change enumeration values etc. for the created simple types.
For the complex types this is still possible.
But since we moved to NWDI it appears as non-editable in NWDS (before the lock symbol was not there):
I've found a file called "ApproverType.java" in the CAF EJB package.
But if I add the new enumeration there, the file always gets overwritten when I regenerate the CAF DC.
How can I edit the enumeration values for that simple type?
Thanks in advance.
Best regards,
Thorsten.

Hi Christian,
where and how should I create a new workspace?
Meanwhile I've found a workaround:
I've created a copy of "ApproverType":
There I've added the missing enumeration.
But personally I don't like this solution...
The strange thing is that the new type remains editable, whereas the old simple types are all non-editable.
Additionally all complex structures can still be edited.
I don't get this.
Best regards,
Thorsten.

I have a sony bravia 26M4000, this model are compatible with digital av adapter to use with ipad2?

have a sony bravia 26M4000, this model are compatible with digital av adapter to use with ipad2

Jose A.-
What ports are on the Sony? The digital adapter should work with an HDMI port.
If the Sony does not have an HDMI port, there are also VGA, Composite and Component AV adapters available from Apple.
There is some additional info at <http://support.apple.com/kb/ht4108>.
Fred

What types of samples are included with the EXSP?

I'm considering purchasing Logic Express, but wanted to know what types of samples (orchestral, synth, drum, keyboard, etc) are included with the EXSP player. Can anyone owning Logic Express tell me what types of samples are included?
Mac G5 Mac OS X (10.3)

Hello, Jeb247.
This is merely a matter of personal opinion, but I believe that the included samples for EXSP are among the better features of the program. Granted, there are some cases where you have several instruments loosely based on the same samples run through different filters, but you are likely to find a decent array of what you need.
You get all the Garageband instruments, as well as the ability to load the Jam Packs into EXSP. While the following list probably contains some overlap with those samples, it will still give you an idea of what's out there:
The top-level hierarchy lists 41 different groups of sounds. After each listing, I'll note the approximate number of 'instruments' in each group:
Piano (10)
Guitars (11)
Bass (5)
Strings (9)
Horns & Winds (9)
Ethnic Instruments (2)
Voices & Choir (3)
Drum Kits (12)
Effects(~50)
Percussion & Specials (2)
Analog: Bass (45), Leads (20), Pads (17), Percussive Waves (44), SpectrumSQ (25), Sweeps (30), Synthcomp (33), Waveforms (50+)
Digital Chromatic Kits (12), Initial Waveforms (60+), Motion & FX (36), Pad Synths (46), Percussive Waves (23), Synths (31)
FM Bass (17)
Synth Atmospheres Layers (31), Singles (40)
Synth Bass (45), Brass (12), Chords (21), Leads & Hooks (30), LFO Synths (21), Multi Sequence (6), Pads (44), Percussive Synths (44), Poly (28), Sidechain Chords (14), Spacious Effects (40), Strings (16), Sweeps & Swells (32), Vocalish (25)
Now, as to the quality of the sounds... your mileage may vary. For orchestral stuff, nothing appeals to my ears like the Kurzweil -- largely because of those smooooooooooth output filters. That's not to say that the EXSP stuff isn't worth checking out; I just happen to use it for electronic textures and percussion rather than acoustic emulations. The drums simply don't cut it for me -- not nearly enough punch. But -- as I've mentioned before, you ears may report different pleasure levels.
Suffice it to say that the EXSP comes with a substantial array of music-making potential. For the money (a freebie w/ Logic Express) it's a really good deal. Shortcomings in its sound set can be overcome by the careful purchase of additional material where your ears report unsatisfactory sounds. If you don't like the drums, iDrum or Battery might be a good idea (or my personal favorite: an outboard drum machine with dead-short latency...); if the orchestra stuff is weak, there are alternatives there, too.
And your options for synth textures are beyond counting -- though I can specifically recommend the utterly astounding (and free!) Alphakanal "Automat". And you can have a pile of fun with the (equally free) NUSofting daHornet. And... and... the list goes on.
Cheers,
Michael

Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

Hello, I am filtering by date
DATEADD(d,DATEDIFF(d,0,GETDATE()),0), but
doing like below gives me an error
ADODB.Command error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range,
or are in
conflict with one another.
/aa.asp, line 19
line 19 is
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
any one have any idea as to why
grateful for any help
thanks
k
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim Recordset1__MMColParam
Recordset1__MMColParam =
"DATEADD(dd,DATEDIFF(d,0,GETDATE()),0)"
If (Request("MM_EmptyValue") <> "") Then
Recordset1__MMColParam = Request("MM_EmptyValue")
End If
%>
<%
Dim Recordset1
Dim Recordset1_cmd
Dim Recordset1_numRows
Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
Recordset1_cmd.ActiveConnection = MM_connpeepeek_STRING
Recordset1_cmd.CommandText = "SELECT usr_image1,
dateimage_usr FROM
diddle.ps_usr_image WHERE dateimage_usr = ?"
Recordset1_cmd.Prepared = true
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
Set Recordset1 = Recordset1_cmd.Execute
Recordset1_numRows = 0
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>
<%
Recordset1.Close()
Set Recordset1 = Nothing
%>

Ben,
If dbo.TG_Account is a table in your FDM database, then you should be able to populate the recordset with:
strSQLAcct = "SELECT Account FROM dbo.TG_Account"
Set rsAcct = DW.DataAccess.farsFireHose(strSQLAcct, False)

HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
(65132)

What optical drive models are compatible with MacBook Pro?

I need to buy an external DVD drive for my MacBook Pro. Are only certain models compatible? Suggestions would be great!

I recommend an Apple superdrive as it is certified by Apple.
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
There are many other ones that are a cheaper alternative however. This one from Amazon will work with a Mac. Look at the reviews
http://www.amazon.com/Samsung-Portable-External-SE-218CB-RSBS/dp/B00DBV28TG/ref= zg_bs_1292113011_1
As for other external DVD drives, I'm sure they're compatible as well but it really depends.

Hi, am I right in thinking that the only iPads with a built in GPS are the cellular models not the wifi only ones?

hi, am I right in thinking that the only iPads with a built in GPS are the cellular models not the wifi only ones?
I am looking to purchase an iPad2 and need a built in GPS

Mini-education:
GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network. GPS signals come directly from the GPS satellites. They provide signals that allow GPS receivers to calculate latitude and longitude information. Navigation software then takes that latitude/longitude info and converts it to land mass, roads, bridges, highways, buildings, etc.
Most navigation software stores the maps right in the iPad/iPod/iPhone but a disadvantage is that the maps must be periodically updated (perhaps once every two years). The Internet is not required to use the system but it is required to update the maps.
Some navigation software gets the maps from the Internet and requires an Internet connection to function but an advantage is that the maps are always up-to-date.
The WiFi+3G/4G iPad and the iPhone both have a GPS receiver. The WiFi-only iPad and the iPod do not and these devices require an accessory.

Simple question: Are Creative Cloud apps currently or will be compatible with the new Amazon Fire phone?

Simple question: Are Creative Cloud apps currently or will be compatible with the new Amazon Fire phone? My friend owns one and says since it's a fairly new operating system that nothing is compatible except the Amazon apps. Is this correct and does Adobe plan to support that OS in the future?

If that uses the Android operating system, anything for Android works
Mobile Apps
As far as future plans, I don't work for Adobe so have no idea
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for feature requests

Hints why all Update Routines are coming with 0.00. Even the simple ones?

Hi,
any hints why about 5 update routines that I have written are coming with 0.00 or blanks.
Even very simple ones such as the one for MyCclQTY in the cube, which has the only line in the update routine between ODS and Cube:
RESULT = SOURCE_FIELDS-QTY.
shows in the cube output as blanks while QTY has data:
e.g. of Cube Output:
QTY-Field2-MyCclQTY----MyCalField2
300--125--BLANK--
0.00
600--42.9-BLANK--
0.00
Basically all my routines, e.g. MyCclQTY, MyCalField2
are not showing values while the direct mappings show the correct data.
In the above simple case, with the routine shown above, I expected to see 300 and 600 for MyCclQTY but they come out blank.
Any hints as to what may be wrong?
Thanks

<Font Face="Tahoma" Color="Blue">
Dear Friend,
Can you please try
RESULT = COMM_STRUCTURE-Qty.
Also please check that you have assigned correct Unit of Measure in the field "Unit of Routine".
Hope it helps.
Regards,
Abhijit
</Font>
Edited by: Siegfried Szameitat on Nov 3, 2008 12:23 PM
deleted request for points. it is against the rules.

What gamepads brands/models livedock are compatible with?

What gamepads brands/models livedock are compatible with?

http://www.sonyericsson.com/cws/products/accessories/overview/livedock?cc=gb&lc=en#view=compatible_p...

I just stepped over from explorer to firefox and al my saved favorites from explorer are vanished. How can I get back these favorites? Besides that I can´t find a favorite menu in my firefoxbrowser wich I like to work with.

I just stepped over from explorer to firefox and al my saved favorites from explorer are vanished. How can I get back these favorites? Besides that I can´t find a favorite menu in my firefoxbrowser wich I like to work with

In the device sync pages select Photos on the top at the right.
Un tick Sync Photos
Apply

Need example for code use with Simple Type Enumeration

Hello,
I've created a Simple Type Enumeration in my Web DynPro Project's Local Directory.
I see that there is an option there to generate a class representation of this Enumeration. Can someone please show me an example code of how to use this Class. For example, to go over the Enumeration and get all the values?

hi Roy,
Try this.
Iterator chk =
wdContext.nodeB().getNodeInfo().getAttribute("val").getModifiableSimpleType().getSVServices().getModifiableSimpleValueSet().entrySet().iterator();
I will check it and tel u in some time...
Regards
Bharathwaj
Message was edited by: Bharathwaj R

Webdypro simple types are vanished with model reimport

Similar Messages

Maybe you are looking for