WebI Report Corruption on BI 4.1 SP 1 Patch 7 : An internal error occured while calling 'openDocument' API WIS 30270
Hi All,
We are facing some weird WebI report corruption issues.
Issue is specific to only one report so far. We have seen this issue usually when we save the report to enterprise or do Save as.
Report gets corrupted at both the places; local and in repository.
The report have 5 Tabs, 3 queries from same database, Cross Tab, and approximately
15 Dimensions and around 500 Measures (From 3 Queries same universe and database)
Variables: 70 Measures and 10 Dimensions (created on report level)
Error Message while opening the report:
This error is generic. however there is no relevant SAP note for this on SMP. Even in trace I could not find much relevant details:
Please find the logs attached for WebI rich client tool.
Note: Change the extension of attached file to .zip and then extract
Thanks
Satish
Hi Jen,
Thank you for the response.
I am using WebI rich client in offline mode without connecting to CMS; still the working report crashes after making some changes while saving it. (we do refresh reports here)
Secondly, APS is already split and we have enough resources on the server, which anyways are not being used so far.
Even in logs do not see any instance for insufficient memory or crashing message.
Only connection server will come into picture when we use Rich Client all other task will be done be Rich client itself.
Thanks,
Satish
Similar Messages
-
WIJ20005 error occurred while editing the WebI document
Hello Everyone,
An error occurred while editing the WebIntelligence document.
The error don't occur when you run again.
Do you know the cause of this problem?
Please give me advice how to investigate.
Error message is as follows:
The current request has returned corrupted data. Contact your administrator (ERR WIJ 20005)
Version: 12.4.4.1557
Application server:
http://xxx.xxx.xxx.xxx:80/AnalyticalReporting/cdzisapi.wis
Stack trace:
java.lang.NullPointerException
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.reArrange(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneScrollLayout.calculateTabRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneLayout.calculateLayoutInfo(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentLayout(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.access$1900(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$f_.componentAdded(Unknouwn Source)
at java.awt.Container.processContainerEvent(Unknouwn Source)
at java.awt.Container.processEvent(Unknouwn Source)
at java.awt.Component.dispatchEventImpl(Unknouwn Source)
at java.awt.Container.dispatchEventImpl(Unknouwn Source)
at java.awt.Component.dispatchEvent(Unknouwn Source)
at java.awt.Container.addImple(Unknouwn Source)
at javax.swing.JTabbedPane.insertTab(Unknouwn Source)
at com.jidesoft.swing.JideTabbedPane.insertTab(Unknouwn Source)
at javax.swing.JTabbedPane.addTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.createUniversTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.init(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.addQueryTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.updateWithDP(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.createQueryTabs(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient2(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient(Unknouwn Source)
at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknouwn Source)
at java.lang.Therad.run(Unknouwn Source)
Environment:
[Server]
- Windows 2008 R2 Enterprise
- BOXI3.1 FP4.4 (IIS)
[Client]
- Windows7 SP1
- IE8
- JRE6 Update21
Regards,
MayumiHi, Yuvraj
Thank you for advice.
>What is the default editing tool set in Prefererences --> WebIntelligence?
>Do you get issue with Interactive mode?
>
>If Advanced mode, have you tried uninstalling and re-installing Java
>and check?
It's Advanced mode.
This error occur sometimes.
And if you re-run after an error occurs, the error does not occur.
So, I guess this error has affected the Java cache file, not the Java software.
How do I check what Java cache is corrupted.
>How many reports are giving this issue?
This error occurs in various reports, but I din't know the number of reports.
>Is this issue coming on all machines or single machine?
This error has occurred in several machine.
>Do you face a similar issue when using Webi Rich Client?
This error occur sometimes, and I usually not use Webi Rich Client.
Try to check, but be difficult.
Regards,
Mayumi -
An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Web Analysis 9.3.1: Error occured while opening document. Document ID = {0}
Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
Could anyone please through more observation on this issue. Let me know if any further information is needed!.
Kindly suggest me any way to resolve it.
Thanks,
KrishanThe isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource) -
Error occurred while opening Web Analysis document.
Hi all,
I've a problem when i try to open some web analysisi report from work space that first worked fine.
The error is:
Error occurred while opening document.
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native: -2147219967 Error Reference Number: {3507FEFB-B38E-4B36-9399-5F3E6B5FAC6A}<BR>Num: 0x80040601;Type: 1;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 2360;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1491;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1245;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1203;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1067;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1390;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1331;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1292;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 603;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 580;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 785;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: CHsvDataQueryResults.cpp;Line: 209;Ver: 9.3.1.0.1502;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: HsvADMDriverSessionInternal.cpp;Line: 4353;Ver: 9.3.1.0.1502;
Can someone help me on this?
Thanks
Best Regards
E. G.Can anyone help me too?
-
Error occurred while saving document in Web Analysis Studio
We have encountered an issue when we tried to save a new report in Web Analysis. An error message box will prompt up displaying "Error occurred while saving document." (Please refer to the attached screenshots). Clicking the details button gives no response.
Originally we encountered this whilst creating a report with an SQL spreadsheet (JDBC connection tested successfully), which failed to save. Proceeding to test this saving a blank report also gave the same error message.
The report shows up in the Oracle view, however also produces an error when trying to open it. "Unable to perform request
Undefined exception encountered. Recommended Action: Contact your corporate technical support." (Please refer to the attached screenshots)
Web Analysis version 11.1.2.3.000.1175
Please advise on how to handle this caseHi Soumya,
Thanks for your reply. I am already using the admin account which is given administrator provisioning under Reporting & Analysis. I have not had issues in the past of saving documents to the server location (e.g. with FR studio). Any ideas as to what else could cause this error? Thanks! -
I am not able to run Report in Report viewer due to the below error:
Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer
This report works fine in SSRS tool. but after i deployed into sharepoint 2013 site, it throws error.
Please advise what needs to be done
Any help is really appreciated.
Thanks,
SPHi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error occurred while getting reports on Blackberry.
We are using BO4.0 mobile service. When I open some Crystal reports in my blackberry I got an error:
u201CAninternal server error occurred while processing the client request. (MOB00082)u201D .
I also noticed,
1. reports which directly connect to the database using sql command are working fine.
2. for some reports having saved data, it could open fine, but if I try torefresh the parameters and get report again error will occur.
3. the webi reports have the same issue.
please help
the following appeared in the logging (Mobi_VMSServer_XX...XX_trace.glf)
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key 42085_code
at java.util.ResourceBundle.getObject(ResourceBundle.java:384)
at java.util.ResourceBundle.getObject(ResourceBundle.java:381)
at java.util.ResourceBundle.getString(ResourceBundle.java:344)
at com.businessobjects.foundation.exception.ExceptionWorker.initErrorCode(ExceptionWorker.java:415)
at com.businessobjects.foundation.exception.ExceptionWorker.<init>(ExceptionWorker.java:131)
at com.businessobjects.foundation.exception.CheckedException.<init>(CheckedException.java:73)
at com.crystaldecisions.celib.exception.CEException.<init>(CEException.java:98)
at com.crystaldecisions.celib.exception.AbstractException.<init>(AbstractException.java:87)
at com.crystaldecisions.sdk.exception.SDKException.<init>(SDKException.java:156)
at com.crystaldecisions.sdk.exception.SDKException$PageServerError.<init>(SDKException.java:1025)
at com.crystaldecisions.sdk.occa.managedreports.ps.internal.PageServerError.GetErrorMessage(PageServerError.java:76)
at com.crystaldecisions.sdk.occa.managedreports.ps.internal.SendRequestHelper.sendRequest(SendRequestHelper.java:67)
at com.crystaldecisions.sdk.occa.managedreports.ps.internal.CacheReportSource.sendRequest(CacheReportSource.java:1523)
at com.crystaldecisions.sdk.occa.managedreports.ps.internal.CacheReportSource.getPage(CacheReportSource.java:1036)
at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalTranslator.getPage(Unknown Source)
at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalPage.loadCrystalPage(Unknown Source)
at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalPage.<init>(Unknown Source)
at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalReport.getPrivatePageByNumber(Unknown Source)
at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalReport.getPageByNumber(Unknown Source)
at com.businessobjects.mobilebi.server.commands.impl.GetReportPageCommand.execute(Unknown Source)
at com.businessobjects.mobilebi.server.commands.impl.dispatch.PropertyFileCommandDispatcher.dispatchMessage(Unknown Source)
at com.businessobjects.mobilebi.server.connector.MessageHandler.received(Unknown Source)
at com.vaultus.common.core.bl.comm.CMSessionReceiveEvent.dispatchInternal(CMSessionReceiveEvent.java:34)
at com.vaultus.common.core.bl.comm.CMSessionDispatchableEvent.dispatch(CMSessionDispatchableEvent.java:91)
at com.vaultus.server.core.CMMessageTask.runInContext(CMMessageTask.java:60)
at com.vaultus.server.core.JobTask.run(JobTask.java:75)
at com.vaultus.server.core.concurrent.Task.run(Task.java:118)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
|49988AEBC37C4723ADE0F9D989CB5110fe30|2011 11 22 09:14:14.897|-0500|>=|W| |Mobi_VMSServer| 7404| 450|Job-74 | ||||||||||||||||||||VMS_SERVER.VDSC_DRIVER_MobileBIConnector||Returning an error to the client. Details:
java.lang.RuntimeException: Information is needed before this report can be processed.
at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalReport.getPageByNumber(Unknown Source)
at com.businessobjects.mobilebi.server.commands.impl.GetReportPageCommand.execute(Unknown Source)
at com.businessobjects.mobilebi.server.commands.impl.dispatch.PropertyFileCommandDispatcher.dispatchMessage(Unknown Source)
at com.businessobjects.mobilebi.server.connector.MessageHandler.received(Unknown Source)
at com.vaultus.common.core.bl.comm.CMSessionReceiveEvent.dispatchInternal(CMSessionReceiveEvent.java:34)
at com.vaultus.common.core.bl.comm.CMSessionDispatchableEvent.dispatch(CMSessionDispatchableEvent.java:91)
at com.vaultus.server.core.CMMessageTask.runInContext(CMMessageTask.java:60)
at com.vaultus.server.core.JobTask.run(JobTask.java:75)
at com.vaultus.server.core.concurrent.Task.run(Task.java:118)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)we re-installed the server but still have the same issue. we also noticed there is another error:
|D7AAE0E1036C45EA94842CAAB137950D0|2011 11 25 08:44:37.480|-0500|>=|W| |Mobi_VMSServer| 1092|8129|Job-43 | |4|0|0|0|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|-|-|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|Cr36auY2UUrBu1kOmdGVKVw3|||||||||com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginSecurityInfo||Bad plugin xml, SI_TOTAL is different from the actual size. SI_TOTAL=11 actual size=10
|D7AAE0E1036C45EA94842CAAB137950D1|2011 11 25 08:44:37.487|-0500|>=|W| |Mobi_VMSServer| 1092|8129|Job-43 | |4|0|0|0|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|-|-|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|Cr36auY2UUrBu1kOmdGVKVw3|||||||||com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginSecurityInfo||Bad plugin xml, SI_TOTAL is different from the actual size. SI_TOTAL=11 actual size=10
|D7AAE0E1036C45EA94842CAAB137950D2|2011 11 25 08:44:37.817|-0500|>=|W| |Mobi_VMSServer| 1092|8129|Job-43 | |2|0|0|0|BIPSDK.InfoStore:query|vtorbodev02:1092:8129.7:1|-|-|BIPSDK.InfoStore:query|vtorbodev02:1092:8129.7:1|Cr36auY2UUrBu1kOmdGVKVw6|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||continueUnpack(): plugin not found, type=380
com.crystaldecisions.sdk.exception.SDKException$PluginNotFound: The 380 plug-in does not exist (FWM 02016)
at com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginMgr.getPluginInterface_aroundBody12(PluginMgr.java:351)
at com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginMgr.getPluginInterface(PluginMgr.java:1)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:544)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
at com.businessobjects.mobilebi.server.utils.enterprise.persistence.GenericListOfDocuments.<init>(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionList.<init>(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionListFactory.getListOfDocuments(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionListFactory.getListOfDocuments(Unknown Source)
at com.businessobjects.mobilebi.server.utils.enterprise.persistence.GenericListOfDocumentsManager.getListForUser(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionManager.<init>(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionManagerFactory.getManager(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.SubscriptionChecker.<init>(Unknown Source)
at com.businessobjects.mobilebi.server.subscriptions.impl.EnterprisePublisher.startPublishing(Unknown Source)
at com.businessobjects.mobilebi.server.connector.CredentialsMessageHandler.received(Unknown Source)
at com.vaultus.common.core.bl.comm.CMSessionReceiveEvent.dispatchInternal(CMSessionReceiveEvent.java:34)
at com.vaultus.common.core.bl.comm.CMSessionDispatchableEvent.dispatch(CMSessionDispatchableEvent.java:91)
at com.vaultus.server.core.CMMessageTask.runInContext(CMMessageTask.java:60)
at com.vaultus.server.core.JobTask.run(JobTask.java:75)
at com.vaultus.server.core.concurrent.Task.run(Task.java:118)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619 -
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
-
Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please VoteHi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote -
When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019 -
Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers. -
Hi All,
I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error while opening the previous instances of the crystal report in BOCMC.
I am trying to run or schedule the report but it is always going to "PENDING STATUS".
(Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
Could you please suggest.
Details :
Crystal Reports 2008
Clarity 13
Server Details:
BO XI 3.1 SP5
OS : Red Hat 6
Patch X11
Symptom
" Crystal Reports 2008/2011/2013 Processing Server fails to create child
processes after applied X11 client libraries security update on Redhat
Linux 6
" "An error occurred while creating a subprocess in the processing server.
[RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BIHi Rajeev,
This is a known issue you can refer to below note,
2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
Regards,
~Shree -
An error occurred while trying to communicate with the web browser.
I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/
Maybe you are looking for
-
IPod not recognized in iTunes, but my iPhone is
I used several different apple USB cords and they all recognize my phone, but not my iPod... It just charges I plug my iPod into my laptop and its charging but no iPod icon is popping up in my itunes.. can someone help??? But my iPhone gets recognize
-
Since they're so large and occupy the same range of y values, I'm kind of reluctant to plot them one over another so a best fit line would, I think, be the most helpful in analysing the data. I'm not quite sure however how to go about this since the
-
VS open website does not resize
Using VS 2012: I resized fonts to something I can read - 12pt with a 14pt Title Bar. The open website (IIS) does not resize. The buttons are below the bottom of the page. So, I must go to personalize and resize the fonts just to open a website, and t
-
CS5. Deleting a user-defined preset Perspective Grid Preset???
CS5 Mac10.5.8 I want to delete a user-defined preset Perspective Grid Preset. How can I do this? http://help.adobe.com/en_US/illustrator/cs/using/WSb8134070d1ccd4cc-123066e6124d7ca3149-80 00.html • Where do I hit Delete in the Perspective Grid Preset
-
Adobe application manager won't let me open it, or any apps, or install anything
any help?