Webi Report ignores decimal values

Hi,
I have a report which takes data from a BI Infocube. I have BOE XI 3.1 installed on two systems. When I run this report on one system, the report works fine and numeric values are displayed along with decimal values ( ex 100.25). However the same report when executed in the other system ignores the decimal values (ex 100).
I check the preferred viewing locale in the preferences and it is set to default values in both the systems.
I have no clue what could have gone wrong.
Any inputs on this issue will be highly appreciated.
Regards,
Rahul Mainkar

You are right. No Fix Pack is installed.
Probably the system, which is NOT truncating the decimal part has been installed on a Windows server where the local system account has EN-US regional settings. This should not be the case for the system which is truncating your numbers.
A work-around is to create a domain account which is member of the local administrators group on the BOBJ servers. You should log on once on each of your two servers using this account and adjust the Regional Setting (Start->Control Panel) to English-United States. Invoke the CCM utility and open the Properties window of your SIA and Tomcat. Enter the credentials of your new user in  the "Run as"  area and restart your services. This will solve your problem.
Regards,
Stratos

Similar Messages

  • Web Report - Hide Repeated Values

    My web report hides repeated values regardless of the query setting. 
    Is there any way to set a specific column to not hide repeated values?  Using the table API?
    Thanks!

    dear Kenneth,
    have you try to remove the check mark of properties 'suppress repeated text' in 'specific' section of your web item 'table' in web template ?
    or you can give parameter SUPPRESS_REPETITION_TEXTS for web item 'table' with value blank
    <param name='SUPPRESS_REPETITION_TEXTS' value=' '>
    doc may useful
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13dc9190-0201-0010-71a4-a9f56cdfcc72
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b1089290-0201-0010-288c-98e4d26487ee
    hope this helps.

  • Web Report - Selecting variable value

    Hi,
    I have web report, where one selection variable for company code is there.
    If i am running the report like compnay code 2000 it is working.
    The web report is having a facility to select multiple company code like >1000. Means before the text box to enter the company code 1000, there is another selection box where we can select =,>,< etc like that.
    If i am selecting > and company code 1000. Then report is not displaying any thing.
    But we have company codes > 1000 like 1001-1007,2000,3000.
    Could you please advise me what might be the wrong with this case.
    Thanks & Regards
    Srini

    One possibility would be that you are having a security issue. If you do not have authorization to see ALL companies > 1000, then your report will show no data (even if you do have authorization to see company 2000).
    Hope this helps...
    Bob

  • Report ignoring parameter value from Crystals own dialog box

    Hi,
    Iu2019m using VB 2008, Crystal 2008 SP1. Iu2019m not embedding the reports, simply opening the .rpt file from an OpenFileDialog and using the below code. Very basic stuff. The report itself has 1 SQL table in it and 1 parameter.
                Dim report As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                report.Load(mReportFile, CrystalDecisions.Shared.OpenReportMethod.OpenReportByDefault)
                crvMain.ReportSource = report
                crvMain.RefreshReport()
    Yet the parameter thatu2019s used as a record selection is ignored and all the records are shown. I canu2019t see whatu2019s missing here. The .rpt file works fine in Crystal 2008, just not in the viewer, even when i debug. Iu2019ve found a crystal viewer FOC (SaberLogic Logicity) based on 2008, where the .rpt file works. Iu2019m thinking it must be a vb.net coding error or omission in my project.

    Hello,
    There are two things I can see.
    The first is a known issue described in the [Note 1204895|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do].
    The second is the line "crvMain.ReportSource = report" will preview the report.
    The line "crvMain.RefreshReport()" just refreshes it and would require parameters again.
    Elaine

  • Linking 2 WebI reports and passing values

    Hi All,
              I have an issue here.As I have 2 reports in WebI created and report1 will be a summary report and i have a object in report1   which is like a hyperlink like for eg 2001,2002,2003 and when i click on 2001  it should open up the report2 and give the Quarter,Q2,Q3,Q4.
    Regards
    Prashant

    Hi Prashant,
    U will have to use the concept of OpenDocument API.
    Following are the steps for your question/difficulty.
    1. Open a report in webi having an object year.
    2.Open another report and have the objects year and quarter.
    Type  the below link in the Formula toolbar. The syntax is as follows.
    ="<a href=http://Server Name/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sType=wid&sDocName=Name Of The Second Reprt Try save this without space&s&lsSEnterYear:="[Year]">"[Year]+"</a>"
    and in the properties window in the Read Cell Content As choose hyperlink.
    You will get exactly what your ver looking for.
    Hopefully this solves your problem.
    Regards,
    Bernard.
    Edited by: Florencio Sequeira on Jun 20, 2008 2:24 PM

  • Error in Web report "Error on Page"

    Hello,
    When I run a web report I provide values for Company code with option as * with cc value as 100*.
    The report runs and gives initial output but I get an Error on page.
    After this I am not able to navigate further in the report i.e  there is no action when I try to drill down.
    Experts please help.
    Regards,
    Ketan

    Hi KT,
    You must have used a varialble while designing the query and you must be knowing which type it is.
    To be more precise pattern selection is supported for selopt (selection option variables only).
    Please note down that the "Contain Pattern" is not supported for the following variable types:
    1) Single value variable
    2) Multiple values variable
    3) Range Value Variable
    This feature is only supported by variable type 'Selection option'.
    Regards,
    Michael

  • Decimal value inconsistency in web reports

    Hi All,
    I have a scenario where reports running on test and quality server are showing different outputs in wad in terms of decimal notation.
    In one system the currency key figure is coming as 3,500.00 while in other system value is appearing as 3.500,00.
    Basically decimal and comma values are getting replaced. We have check SU01 settings also and they are maintained in simlar manner in both systems. Is there any other place where these settings are maintained in system which is leadng to this discrepancy. Please let us know if there are some settings in SPRO or somewhere else which are system dependent and is causing this issue.
    Thanks
    Rahul Mahajan

    Hello,
    Are you executing both the reports in same work station or different work stations ?
    Because the windows settings ( control panel -Time and date settings) will influence the ','  and :." notation in all reports, though not specific to web reports.
    Are you also facing the same issue in work books also ?
    Regds,
    Ravi

  • WebI Report on BEx ignoring the filter values

    Hallo experts,
    I have a Webi report on BEx query.
    We have two BEx Variables; one for Manual input and other one is a Customer Exit to calculate YTD on 0CALMONTH(Calender Month/Year).
    We've created Webi report on this Bex query.
    When we selected a value in webi prompt then it is ignoring the value and delivering all the data for previous years also.
    But when we selected the value in Bex variable then it is giving only values which we selected.
    For example:
    We have data in our cubes for 2013 and 2014.
    We selected in webi prompt JUN 2014 ------ in this case webi is delivering all the data for all the months and years (i:e JAN - DEC for 2013 and 2014)
    We selected in Bex variable JUN 2014 ----in this case Bex is delivering only values for JAN 2014 until JUN 2014 for only 2014.
    So, BEx is working as should be but not Webi.
    Any ideas to solve this Webi issues would be appreciated.
    Thanks
    Indra

    Hallo Sathish,
    When I am placing input variable in a dummy key figure, I am getting values for one month less.
    Example: i am selecting JUN 2014 and it is delivering values until MAY 2014.
    Thanks
    Indra

  • Fetch table value in BEX Web report using Javascripts, and assign condition

    Hi Gurus,
    I am currently using WAD 3.5. I need to change the web report to behave like below :-
    1. Default layout (Field A B C) with condition A & B activated.
    2. If the drilldown Field B and C is removed, leaving only field B alone in the report drilldown, deactivate condition A & B, Activate condition C & D.
    3. the above can be reversed where user drilldown field B & C into the layout, the condition A & B need to then be activated back.
    So I believe this can be done using Javascript. So my questions are below
    1.) How do i fetch table value for the navigationblock ? with navigationblock i am able to know what are the columns are in the drilldown (i will not display free characteristics, so ignore this part). how do i read the content of NAVIGATIONBLOCK_1 as shown in following code? using javascript.
    <P><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="NAVIGATIONBLOCK_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             <param name="SHOW_FREE_CHARACTERISTICS" value=""/>
             <param name="SHOW_NAVIGATION_ICONS" value=""/>
             <param name="SHOW_FILTER_ICONS" value=""/>
             ITEM:            NAVIGATIONBLOCK_1
    </object></P>
    2.) After question 1.) is done, please advice how do i activate/deactivate the conditions? based on the fields found in above. Maybe I can use IF navigationblock_1 contain field A only, then set condition A & B , etc.
    <p><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="CONDITIONLIST_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CONDITION"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             ITEM:            CONDITIONLIST_1
    </object>
    I would appreciate if we can solve Question 1 first before proceed to 2.)
    Please advise. Thanks

    Hi JTi,
    what i have understood from your requirement is that you want to access the web item table_1 in javascript, you can get that as below:
    Add
    <span> 
    tag before your web item and set its id to table.
    <span id = "table">
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TABLE_1"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
    <param name="GENERATE_CAPTION" value=""/>
    <param name="CAPTION" value="jezel"/>
    <param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
    <param name="BLOCK_SIZE" value="0"/>
    <param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
    ITEM: TABLE_1
    </span>
    In javascript access it as :
    var mytable = document.getElementsById("table");
    Hope this helps
    Thanks
    Dipika

  • Getting wrong values  for decimal value in Bex report

    Hi,
         I am getting some problem in Bexreport decimal values.
       In ODS i am able to look the values for this key figure
      (Total PO Release Val)= 140.692,00,the same value in Bex report looks like this $ 140,692.00.
         Here one calculation is going with these above values
       % Used = 'Total PO Release Val' / 'Target Value' * 100
        as per ODS value calculation  it is correct = 140.692/1000 * 100 =14.692
       as per Bex  it is coming like this = 140,692.00/1000 *100 = 142.692.
        in Bex report Percentage valus is not considering value is taking as 140,692.00 rather than 140.692.I mean to say decemal values are ignoring while calculation in Bexreport.can you any please advice me how to comeout of this problem.Appreciate your help.
    Regards
    Ramesh

    <i> "(Total PO Release Val)= 140.692,00,the same value in Bex report looks like this $ 140,692.00."
    </i>
    How do you check the ODS value? The amount will only have two decimal places after it, so you can't have a value like 140.692,00. It seems to be an issue of user's decimal notation (where decimal is represented by comma, and thousand seperator by '.'). Go to user profile, change this setting (in default tab) to correct one (ie decimal being represented by '.') and login again and check it. The value that you see in ODS is 'one hundred forty thousand six hundred ninety two, the same that you get in Bex, only the representation is different).

  • Values not getting refreshed in web report.

    Hello Friends,
    Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
    IMS is the combination of all divisions and IMR is the combination of only three divisions.
    In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
    Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
    and using new selection we have restricted the divisions with IMS,IMN,etc.,
    IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
    IMN... all are with single divisions
    Now we have assigned the query in the data provider for select options in hte web report,
    But when we select any options the values of the remaining queries are not getting refreshed.
    If we use the divisons directly with out using the structures the values are getting refreshed.
    Can any one give me the solutions for this?
    Regards
    Srinivas

    Hi Mansi,
    Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
    If the solution is not related to your question, please provide more details.
    Thanks,
    Rajesh

  • ALV report - remove of decimal values

    Hi experts,
    In my ALV report, output table having decimal values, ex:90000.50, i want to display only 90000,
    can help any one inthis.
    Thanks in advance.
    Regards
    Rams

    Hi,
    for that particular field in Field catalog..
    <ur field cat>-decimals_out = 0.
    see this sample code.
    type-pools: slis.
    DATA: begin of itab6 occurs 0,
    chk type c,
    a type p decimals 2,
    b type p decimals 2,
    c type c,
    end of itab6.
    data: ls_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
    wa_layout TYPE slis_layout_alv.
    itab6-a = '1.12'.
    itab6-b = '2.25'.
    itab6-c = '+'.
    append itab6.
    append itab6.
    append itab6.
    append itab6.
    ls_fieldcat-fieldname = 'A'.
    ls_fieldcat-seltext_m = 'A'.
    append ls_fieldcat.
    ls_fieldcat-fieldname = 'B'.
    ls_fieldcat-seltext_m = 'B'.
    ls_fieldcat-decimals_out = 0.  "this ll do
    append ls_fieldcat.
    ls_fieldcat-fieldname = 'C'.
    ls_fieldcat-seltext_m = 'C'.
    append ls_fieldcat.
    wa_layout-box_tabname = 'ITAB6'.
    wa_layout-box_fieldname = 'CHK'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = sy-repid
    it_fieldcat = ls_fieldcat[]
    IS_LAYOUT = wa_layout
    TABLES
    t_outtab = itab6[].
    Cheers,
    jose.

  • Web Report not printing the fiscal year period variable value

    Hi,
    In web report where in one text element, we enabled the fiscal year period variable value to display
    in the report result.
    If we run the report then this fiscal year period is displaying in the general information.
    We have print button (Java Code),  where user can take a printout of the same report.
    In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
    It is required to print the fiscal period also in the print out of the report.
    Any help to come out of this.....
    Thanks
    Srinivas

    Hi
    Any Help.....
    Srini

  • BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

    Hi,
    In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
    Is it BW problem or BO problem?
    I checked in some other threads but it's not given solution.
    Thanks,
    Manjunatha

    Hi,
    Is it BW problem or BO problem? : BO
    is it causing problem with hierarchly data only ?  without hierarchies data is matching or not?
    Post same in SAP BusinessObjects Web Intelligence  .
    Thanks.

  • Can we generate one report tab for each of the prompt values selected in the bobj 4.0 webi report.

    can we generate one report tab which filters
    with each prompt value selected in bobj 4.0 webi report.

    Hi Shrinidhi ,
    It can be achievable with static tabs created for each LOV .But this is not recommended because , object values can change dynamically .
    It is good idea to use section on prompt object in the report .With sections great feature available is in larger report it’s easy to navigate using map. It displays the section tree.You can select the particular LOV to navigate.

Maybe you are looking for