WebI showing random value from give prompt value

Dear All,
I have made an universe on top of SAP BW Query.
I have designed webI report on top of that. In that I have "Fiscal Year.Period" as Interval Prompt in WebI not in BW Query and I can't put prompt in BW Query because based on same universe i have other report as well.
I have user cross-tab in Report and in column section I have "Fiscal Year.period".
Now the issue is, when I refresh document, it is asking me to enter From & To Period. I am giving input as example 001.2010 to 012.2010 then it should show me values between 001.2010 to 012.2010 only but instead it is giving me values for 2011, 2007 year as well.
Does anyone have idea why it is happening ?
As per my analysis, during prompt value LOV is by default sorted in Asscending order :
1)V3/001.2010
2)V3/001.2011
etc.
I really appreciate your quick input on this.
Regards,
Rishit

hi ,,
I have tried and understand your scenario....the data thing it having issue with bo .....but resolved by using this notes......
1494404 - Using Webi query filters based on dates using "Greater than" and "Less than" and "between" does not work properly when based on SAP BEx.
Try this and give the feed back......

Similar Messages

Return a Range of Value from Dashboard Prompt

From example, 'Day' column has values from 1 to 365 and I set it as a dashboard prompt. If I want to select a range of value from 'Day', I can use 'is between' operator. Then I can select a range of day value from 1 to 365.
My additional requirement is to return a fixed range of value. For example, the maximum range is 31 days. That means if I select day 1, the result should display 1-31. Also I should be allowed to select a range fewer than 31 days. In short, I need to return result from minimum 1 day to maximum 31 days. Is it possible for dashboard prompt? or there are other solutions?

Let's see. To answer your first question, yes, you will end up having two prompts that hold values 1-31. The user will select one value from the first prompt, say 2, and a value from the second prompt, say 31. Since both of these prompt values are stored in presentation variables, you can use them in the filter on the "day column" in your report (i.e., 'Day' greater than or equal to pvStartDay and less than or equal to pvEndDay). This will give you the range on your report.
The reason for the CASE WHEN 1=0 is because you are using the Day column twice in your prompt. OBI only allows you to use a column once in your report. It is also to protect the column from being affected by the prompts.
Check this link for details:
http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/
Now, based on your second post, it appears your conditions are different. You are selecting actual dates, not a number from 1-31.
TomChan wrote:
Maybe I can describe my case in a simple way. I have a startDate prompt that can select all date values. If I select a date value from startDate prompt, says '20090101'(in yyyymmdd format), the endDate prompt should display maximum 31 values(i.e. 20090101 - 20090131) basing on the selected values of startDate prompt. Then I further select a value in the endDate prompt to filter the report. Is it possible?I am a bit confused. It seems that you want the first prompt to display the first day of the 12 months of the year and once selected, the second prompt would be constrained to show the days of that particular month from which the user would select the "end date"? But then you say "basing [sic] on the selected values of starDate prompt" -- you have "values" as plural. Does this mean the user can select multiple values in the first prompt?

[Forum FAQ] SharePoint 2013: Extracting values from a multi-value enabled lookup column and merge values to a multi-value enabled column

For some business requirements, users want to extract values from a multi-value enabled lookup column
and add items to another list based on each separate value. In contrast, others want to find duplicate values in the list and merge associated values to a multi-value enabled column and then
add items to another list based on the merged value. All of these can be achieved using SharePoint Designer 2013 Workflow.
How to extract values from a multi-value enabled lookup column and add items to another list based
on each separate value using SharePoint Designer 2013.
Important actions: Loop Shape; Utility Actions
Three scenarios
Things to note
Steps to create Workflow
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013.
Important actions: Call HTTP Web Service; Build Dictionary
Things to note
Steps to create Workflow
How to
extract values from a multi-value enabled lookup column and
add items to another list based on each separate value using SharePoint Designer 2013.
For example, they have three lists as below. They want to
extract values from the Destinations column
in Lookup2 and add items to Lookup3 based on each country and set Title to current item: ID.
Lookup1:
Title (Single line of text)
Lookup2:
Title (Single line of text), Destinations (Lookup; Get information from: Lookup1 in Title column).\
Lookup3:
Title (Single line of text), Country (Single line of text).
Important action
1. Loop Shape: SharePoint Designer 2013 support two types of loops: loop n times and loop with condition.
Loops must also conform to the following rules:
Loops must be within a stage, and stages cannot be within a loop.
Steps may be within a loop.
Loops may have only one entry and one exit point.
2. Utility Actions: It contains many actions, such as ‘Extract Substring from Index of String’ and ‘Find substring in String’.
Three scenarios
We need to loop through the string returned from the look up column and look for commas. There are three
scenarios:
1. No comma but string is non-empty so there is only one country.
2. At least one comma so there is at least two or more countries to loop.
3. In the loop we have consumed all the commas so we have found the last country.
Things to note
There are two things to note:
1. "Find string in string (output to Variable:index)" will return -1 if doesn't find
the searched for string.
2. In the opening statement "Set Variable: Countries to Current Item:Destinations" set the return
field as "Lookup Values, Comma Delimited".
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Destinations (Lookup; Get information from: Lookup1 in Title column).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup2.
Add conditions and actions:
Start the workflow automatically when an item is created.
Add item to Lookup2, then workflow will be started automatically and create multiple items to lookup3.
See the below in workflow History List:
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013
For example, they have three lists as below. They want to find duplicate values in the Title column in
Lookup3 and merge country column to a multi-value enabled column and then add item to lookup2 and set the Title to Current Item: Title.
Lookup1:
Title (Single line of text)
Lookup3:
Title (Single line of text), Country (Single line of text).
Lookup2:
Title (Single line of text), Test (Single line of text).
Important actions
"Call HTTP Web Service"
action: In SharePoint 2013 workflows, we can call a web service using a new action introduced in SharePoint 2013 named Call HTTP Web Service. This action
is flexible and allows you to make simple calls to a web service easily, or, if needed, you can create more complex calls using HTTP verbs as well as allowing you to add HTTP headers.
“Build Dictionary"
action:
The Dictionary variable type is a new variable type in the SharePoint 2013 Workflow.
The following are the three actions specifically designed for the Dictionary variable type: Build Dictionary, Count Items in a Dictionary and Get an Item from a Dictionary.
The "Call HTTP Web Service" workflow action would be useless without the new "Dictionary" workflow action.
Things to note
The
HTTP URI is set to https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be sort by Id in descending order.
Use Get
d/results(0)/Id form
Variable: ResponseContent (Output to
Variable: maxid) to get the Max ID.
Use Set
Variable: minid to Current List:ID to get the Min ID.
Use Copy from
Variable: destianation , starting at
1 (Output to
Variable: destianation) to remove the space.
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Test (Single line of text).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup3.
Add a new "Build Dictionary" action
to define the http request header:
Add a Call HTTP Web Serviceaction, click on
this and paste your http request.
To associate the
RequestHeader variable, select the Call action property,
set the
RequestHeaders property to
RequestHeader:
In the Call action, click on
response and associate the response to a new
variable: ResponseContent (of type Dictionary).
After the Call action add Get item from Dictionary action to get the Max ID.
Add Set Workflow Variable action to get the Min ID.
Add Loop Shape (Loop with Condition) to get all the duplicate titles and integrate them to a string.
Create item in Lookup2.
The final Stage should look like this:
Start the workflow automatically when an item is created.
Add item to Lookup3, then workflow will be started automatically and create item to lookup2.
See the below in workflow History List:
References
SharePoint Designer 2013 - Extracting values from a multi-value enabled lookup column into a dictionary as separate items:
http://social.technet.microsoft.com/Forums/en-US/97d34468-1b53-4741-88b0-958472f8ca9a/sharepoint-designer-2013-extracting-values-from-a-multivalue-enabled-lookup-column-into-a
Workflow actions quick reference (SharePoint 2013 Workflow platform):
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Understanding Dictionary actions in SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/jj554504.aspx
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/dn567558.aspx
Calling the SharePoint 2013 Rest API from a SharePoint Designer Workflow:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/

GREAT info, but it may be helpful to note that when replacing a portion of the variable "Countries" with a whitespace character, you may cause the workflow to fail in a few specific cases (certain lookup fields will not accept this and will automatically
cancel). I only found this out when recreating your workflow on a similar, but much more complex list set.
To resolve this issue, I used another utility action (Extract Substring from Index of List) to clear out the whitespace. I configured it as "Copy from
Variable: Countries, starting at
1 (Output to Variable: Countries), which takes care of this issue in those few cases.
Otherwise, WOW! AWESOME JOB! Thanks! :)

Get column values from list of values programmatically

hi all
how i get column values from list of values programmatically in the
returnPopupDataListener method

If this answers your question , please close this thread by marking it as answered.
Thanks

List values from different prompts into one.

Hi All,
We have OBIEE 11g and building Analysis out of Essbase cube. Here is our Requirement we need to build a Dashboard prompt which shows values from different tables.
All these tables belong to one dimension and this has about 10 tables in it. So the prompt which we build should pick specific values from each table.
I know we can build prompt for every table which we will end up with 10 prompts which doesn't look good so we need to show all the values of these ten prompts in single drop down (One Prompt)which we can use for refreshing the dashbaord.
Say we have table names as Gen1.Organisation, Gen2.Organisation,.........Gen10.Organisation
Thanks,
Shashank

are there any dependancies on the selections e.g if you pick Gen1.Organisation1 does this mean that you can only pick Gen2.OrgA or Org B?
if there are no dependancies and you want all possible combinations across ten tables then you are looking at one huge drop down list !!

How to restrict values in one prompt based on value from another prompt

Hi
I have a requirement as follows. I have two fields (objects)
program code
contract number
one program code can have several contract numbers.
I need to provide prompts on Program code and contract number. when user selects one program from the prompt on program code then contract field should only show contract numbers belonging the program user selected.
Please let me know how to bring this functionality in Webi report.
Thanks in advance.

Hi
if ur requirement is in query level its impossible.(i mean whn u click on programcode then u have to display in contract at query level)
if you want to display at report level then
The two objects Program and contract have a mapping then place a program object in query filter and use operator equal to and select prompt and run the query then it will ask you to select program .whn on choosing it you will get filtered contract numbers for that program in report level . There no need to use prompt for contract numbers object .
Hope this helps u
Thanks
sunil
Edited by: K.sunil on Nov 7, 2011 9:30 AM

How to access a value from "List of Values" by giving a name?

I have a "List Of Values" defined in my BI Report. It comprises list of label-value pairs.
I have defined a parameter :p_Value for the above "List Of Values" defnition. this parameter is used in datasource sql defnition to filter the query results. I configured a template which has a table that shows all the parameters used for filtering query results. If I give <?$p_Value?> in the template then the parameter value is rendered on it. But I want the "name" of the parameter and not the value. Can anybody tell me how to access name of the parameter which refers to one of value in "List of Value" defnition?

option 1:
Can you get the value from the DB in the report sql ?
You have the code, inside the report query, if you can get the decoded value form that
option2:
create another paramater, LOV and query, and make it as hidden, and use the first :param_1_value in the lov query in the second param and decode the value.
Now , you can refer the :PARAM_2_value in template which will have decoded value.

MDM Import Manager - remove multiple values from a multi valued fiedl

Hi,
We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?
Thanks and regards,
Maria

*We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?*
Hi Maria,
There can be multiple ways to achieve this -
1.After doing field mapping for XPTO you can set conversion filter for each of the values.
2.Value map with NULL.
3.Trigger a Workflow on import/record add,run assignment and make that field NULL.
4.Run mass update for conditional assignment based on that value of XPTO.
There can be more ways,whichever suits you best you can go ahead with that.
Hope it helped
Regards,
Ravi

How to find first non zero value from the numeric value or string?

Hiii, Every body
I have one numeric indicator in which some valuse is coming with the decimal value, lets say 0.00013, now i want to find the first non-zero value from this numeric indicator, then what should i do to do so? i have converted it in the string, but i could not find any method to find first non-zero value from that string or either from the numeric indicator????
Can you please help me, how to do it? i have attached the vi and write all the description inside.
Thanks in Advance,
Nisahnt
Attachments:
Find first nonzero.vi ‏20 KB

Just convert it to an exponential string and take the first character .
Message Edited by altenbach on 05-10-2006 08:00 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
FisrstNonzeroChar.png ‏3 KB
FindFirstNonzeroCharacter.vi ‏20 KB

Passing value from one prompt to another in different section

Scenario:
I have three columns to be used for this particular case
Month (eg 2011 Jan)
Month No (eg 201101)
Previous year Month (eg 201001)
Now i am using "Month" as a prompt in all my reports.
But i am fetching the report for a period of 1 year.
Which means if i choose 2011 Aug then i should get the report for the period 2011 Aug to 2010 Aug.
I am using intermediate report for this.
Where i calculate from the original column and fetch the report using "filter based on other reports"
But now i want to do it using prompts only.
I want to compare whether it will make the report faster or not.
The concept is i use "Month"(M) as prompt in all reports.
But i want to keep "Month No"(MN) and "Previous year Month"(PYM) as prompts too.
then trigger the value selection of combo1(MN and PYM prompts) with selection of M prompt.
There should be no go buttons for the combo1 prompt.
And the combo1 should be hidden so that user is able to see only "M" prompt.
Please give your opinion for this scenario

ok, i resolved this issue by passing URL parameters from my calling application to the called application..
the code I used looks as follows:
*---- Pass parameters through lt_parms table to URL
ls_parms-name = 'OPERATION'.
ls_parms-value = 'M'.
APPEND ls_parms to lt_parms.
ls_parms-name = 'PROJECT_ID'.
ls_parms-value = lv_ext_id.
APPEND ls_parms to lt_parms.
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = 'zps_ppm_idea_sheet'
      in_parameters = lt_parms
    IMPORTING
      out_absolute_url     = str.
l_cmp_api = wd_comp_controller->wd_get_api( ).
l_window1 = l_cmp_api->get_window_manager( ).
result = l_window1->create_external_window(
    URL = STR ).
result->open( ) .
I basically transformed my component controller context attributes to URL parameters, called the app in a new browser passing those parameters.
Then, converted those URL parameters back to component controller context atributes for use on the other side.

Filter view object by selected values from list of values

Hello,
I've the following problem with my ADF Application. I have three view objects in my application module. Two of them are connected via a view link. For example take users, who are connected to their departments. The remaining view object consists of factories. Now I want to show the user/department dependency in a tree table and the available factories in a list of values. This list of values should be used to filter the shown users.
I've already tried to use bind variables in the users view object. But I don't know how to fill them with the value of the list of values.
Can someboy give me a tip how to solve this problem.
Best regards,
Enno

Hi Enno,
Try this:
- Have a AM method with one parameter(which takes user from the list of values) and inside AM method write code to set the bind parameter value and execute the query
Sample Code
public void filterByUser(String user){
   //Get your UserViewObject instance to userVO
   userVO.setNamedWhereClauseParam("<Bind_Variable_Name>", user);
   userVO.executeQuery();
}- Expose the method as client interface
- Drop the method (Data Control) as a button on to the page and pass the listofvalues value as a value to the method binding param
Something like this: ${bindings.<User>.inputValue}
- Finally refresh the master and detail tables based on the ListOfValues selection by setting partialTriggers property to the listofvalues component id
Hope it is clear
Sireesha
Edited by: Sireesha Pinninti on Oct 15, 2009 4:54 AM

Display specific value from List of Values(LOV)

Hi All,
Is this possible in BOXI R2 that i created a List of Values like below:
1. P1AF
2. P1XA
3. P2AF
4. P2XA
5. P2XD
6. P3AF
7. P3XA
8. P3XD
and i would like to show only 1 & 2 values for specific users. Or switch on /off some values without accessing the database.

Can you confirm that this question is posted to the correct forum, or if it should go into another?
If this is Universe Designer related, you can review your LOV's by:
1. right-click on the object in the universe designer, and select Properties dialog
2. Select Properties tab,
3. Select 'Display'
4. then shift or control select the LOV's that you want to be viewable,
5. enable the checkmark next to 'Show Selected Only'
6. Click OK, and then save and re-export the universe.

Displaying All Values from a Multiple Value Parameter

Hi,
Using XI, I have a parameter field that allows the user to enter multiple values Eg. 01, 02, 13, 14. I want to create a formula to display all the values the user has selected.
Is there a way to do this?
Thanks,
Brian

join({?Parameter},",")
creates a string with the items in your parameter separated by commas

How to get a specific value from a mult-value returning procedure

Hi,
We're using Oracle 11.1.
I have a procedure that I'm calling in a query that looks like the following:
   PROCEDURE tcmenc1_clean_codes (
      p_icd_code_1_source   IN     VARCHAR2,
      p_icd_code_2_source   IN     VARCHAR2,
      p_icd_code_3_source   IN     VARCHAR2,
      p_claim_code_1_src    IN     VARCHAR2,
      p_claim_code_2_src    IN     VARCHAR2,
      p_claim_code_3_src    IN     VARCHAR2,
      p_revenue_code_1_src            IN     VARCHAR2,
      p_cpt_code_1_src                IN     VARCHAR2,
      p_icd_code_1_std        OUT VARCHAR2, <------------------------Just want this one.
      p_icd_code_2_std        OUT VARCHAR2,
      p_icd_code_3_std        OUT VARCHAR2,
      p_icd_code_1_std         OUT VARCHAR2,
      p_icd_code_2_std         OUT VARCHAR2,
      p_icd_code_3_std         OUT VARCHAR2,
      p_revenue_code_1_std               OUT VARCHAR2,
      p_hcpcs_code_std                   OUT VARCHAR2,
      p_cpt_code_std                     OUT VARCHAR2,
      p_generic_cd_std                   OUT VARCHAR2
   )I'd like to return only the p_icd_code_1_std value. how can I do this?
Can I just use:
PROCEDURE tcmenc1_clean_codes (input1, input2, input 3,...,
p_icd_code_1_std => output1);Also If I don't have inputs for all my inputs, can I specify just the fields I want to input?

I'm not sure I understand what you mean by target?
I thought about using a function to pass parameters to this procedure and then have another input parameter that would determine
which output parameter to use.
I just wanted to see if there was a cleaner way to do this.

Substrating a value from its previous value

suppose i have the data in a column like
col
200
230
250
290
300
then the output should show
col output
200 Null
230 30
250 20
290 40
300 10
can anybody help?

Here is the sample ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.75
satyaki>
satyaki>with t
2 as
3    (
4     select 200 cola from dual
5     union all
6     select 230 from dual
7     union all
8     select 250 from dual
9     union all
10     select 290 from dual
11     union all
12     select 300 from dual
13    )
14 select cola, (cola - prev_cola) output
15 from (
16         select cola,
17                lag(cola,1,null) over(order by cola) prev_cola
18         from t
19       );
      COLA     OUTPUT
       200
       230         30
       250         20
       290         40
       300         10
Elapsed: 00:00:00.01
satyaki>
satyaki>Regards.
Satyaki De.

WebI showing random value from give prompt value

Similar Messages

Maybe you are looking for