Weblogic 10.3.2/3 AdminServer startup failure using WLST

Hi,
I'm migrating our Weblogic environments onto a Linux platform(Centos 5.5). I'm running 64bit Java and I've installed Weblogic using the Generic Jar. However I expierence an error when attempting to Start the AdminServer using a WLST script. If I then execute ./startWeblogic.sh the server starts without any problems.
I create the domain fine, I then start the AdminServer within WLST to make some configuration changes username/password etc. Starting the AdminServer generates an error error see below.
This happens on both versions of Weblogic 10.3.2 & 10.3.3. I've just tried starting the server directly via WLST and I get the same issue.
Starting weblogic server ...
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:41 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 17.1-b03 from Sun Microsystems Inc.>
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:41 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file /strata/clients/inc39/Stream5/CDL/Logs/AdminServer_%yyyy%%MM%%dd%.log is opened. All server side log events will be written to this file.>
.WLST-WLS-1289993140407: <Nov 17, 2010 11:25:44 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
.WLST-WLS-1289993140407: <Nov 17, 2010 11:25:47 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:47 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
.WLST-WLS-1289993140407: <Nov 17, 2010 11:25:49 AM GMT> <Notice> <StdErr> <BEA-000000> <Nov 17, 2010 11:25:49 AM com.sun.faces.config.ConfigureListener contextInitialized
WLST-WLS-1289993140407: INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'>
WLST-WLS-1289993140407: <Nov 17, 2010 11:25:49 AM GMT> <Notice> <StdErr> <BEA-000000> <Nov 17, 2010 11:25:49 AM com.sun.faces.config.ConfigureListener contextInitialized
WLST-WLS-1289993140407: INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'>
...WLST-WLS-1289993140407: Stopped draining WLST-WLS-1289993140407
WLST-WLS-1289993140407: Stopped draining WLST-WLS-1289993140407
java -version
java version "1.6.0_22"
Java(TM) SE Runtime Environment (build 1.6.0_22-b04)
Java HotSpot(TM) 64-Bit Server VM (build 17.1-b03, mixed mode)

How is your script constructed?
The following shows an example of a startscript:
beahome = '<middleware-home>';
linux = true;
adminusername = 'username';
adminpassword = 'password';
domainname = 'DomainName';
pathseparator = '/';
if not linux:
     pathseparator = '\\';
domainlocation = beahome + pathseparator + 'user_projects' + pathseparator + 'domains' + pathseparator + domainname;
nodemanagerhomelocation = beahome + pathseparator + 'wlserver_10.3' + pathseparator + 'common' + pathseparator + 'nodemanager';
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);

Similar Messages

  • Integration 9.2 startup failure using startServer

    Hi ,
    i am using wlst scripts to start wli admin sever and configure security ,i call the wlst scripts after executing
    setDomainEnv.sh .
    But the server fails to start , it goes from "STARTING" state to "SHUTDOWN" state.
    It complains following.
    <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address xx.yy.zz.aa might be incorrect or another process is using port xxxx: java.net.BindException: Cannot assign requested address.>
    Although there is no service running in that port.
    In case i start the server using startWebLogic.sh . it starts fine.
    If anyone have faced this problem , please let me know..
    any quick hint or help will be appreciated
    Thanks
    Roy

    Hi, I get the same error but a try to start bea domain in no-development mode, but if I run bea in develoment mode with the same configuration it start ok.
    I think that mybe it is a problem with the licence.

  • How to fix windows 7 startup failure? Windows startup repair cannot help

    Recently, my laptop have problem with the startup and unfortunately it is showing crash dump error as well.
    This is the error mesage for startup issues: c000021a fatal system error, intial session process or system process terminate
    and this is error message for crash dump: STOP: 0x0000000A (0xFFFFF80003BEDE60, 0x0000000000000002, 0x0000000000000008, 0xFFFFF80003BEDE60)
    So, when i start my laptop it comes up with the startup c000021a fatal system error. I tried to go to startup repair and chose the "Last Known Good Configuration (advanced)" after that it shown system crash dump error message.
    Unfortunately, I did not make the restore point. I want to reinstall my windows but it cant boot from CD/DVD due to startup failure. I already choose the booting sequence to CD/DVD as first sequences but it still does not work.
    Anyone can help me with this issues?
     

    Hi Arie K,
    Please explain a bit about the following question for better analyzation:
    1. What changes have you made before this issue?
    2. Do you receive the same error message when we use the normal boot, safe mode and Last Known Good Configuration? If no please share it with us.
    3. What error messages do you receive when we try to boot from CD/DVD?
    We could try to use the USB driver to performance the system restore or reinstall.
    For more information, please refer to the following article.
    How to Build a Bootable USB Drive? or How to Install an Operating System from a USB Device?
    http://blogs.technet.com/b/chenley/archive/2011/10/06/how-to-build-a-bootable-usb-drive-or-how-to-install-an-operating-system-from-a-usb-device.aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Upload a jar file in remote Weblogic server using wlst

    Is there a way to upload a jar file to a specific location on remote weblogic server using wlst? This is my scenario - I need to upload aspectjweaver.jar to the remote server. This needs to be done before weblogic startup, as weaving takes place during startup . FTP is not an option because those ports are blocked

    Hi,
    You don't have such option through upload files as what FTP do but you can deploy the application through wlst.
    eg:
    deploy('Web14','C:/TEMP/Web14.war',targets='Cluster1',stageMode='stage',upload='true',remote='true')
    Or you can use Deploy option to deploy app directly.
    eg:
    java weblogic.Deployer -adminurl http://localhost:7001
    -username weblogic -password weblogic
    -deploy ./myapp.ear -id myDeployment
    This will upload file and place the file there from there you can manipulate the file.
    Hope this will work for you.
    Regards,
    Kal

  • How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    Question
    How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

    '''IT'S A EASY AS IT SHOULD BE.'''
    This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
    This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
    # If you haven't already, open a bunch of tabs on a few different subjects.
    # Click the List All Tabs button on the right side of the tab strip.
    # Select Tab Groups.
    # Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
    # Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
    #A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
    # Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
    # Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
    # DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
    # Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
    # So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

  • How to create an RDBMS event generator using wlst on weblogic 10.3

    how to create an RDBMS event generator using wlst on weblogic 10.3, i got a code fragment needing class "com.bea.wli.management.configuration.RDBMSEventGenChannelConfiguration"
    but i can' t find this class in classpath on weblogic 10.3, pls help me, thanks. code sample is better.

    Hi,
    RDBMS Event Generator Channel Rule Definition
    When you are creating channel rule definitions in the WebLogic Integration Administration Console, it is recommended that you do not use the Back button if you want to resubmit the details on a page.
    You should always use the navigation links provided and create a new channel rule definition.
    http://download.oracle.com/docs/cd/E13214_01/wli/docs85/deploy/cluster.html
    http://download.oracle.com/docs/cd/E13214_01/wli/docs81/relnotes/relnotesLimit.html
    http://otndnld.oracle.co.jp/document/products/owli/docs10gr3/pdf/deploy.pdf
    This problem has been seen in the past when defining the channel rule for an RDBMS Event Generator if schema name was specified with the incorrect case (i.e. lowercase when it should have been uppercase or vice versa). To that end, it is suggested to change the case of the schema when creating the channel rule
    Regards,
    Kal

  • Folder with question mark on startup after using boot camp!!!

    im getting a folder with a question mark on startup after using boot camp. it shows up for a second, then the apple logo pops up and OSX boots normally. i wouldnt be concerned except this folder with the question mark usually shows up when the computer cant find the startup disk or OS. so in fact what is happening is that my macbook cant find the startup disk for a second and then seems to find it. is anybody else having this problem. i dont like it and want to get rid of it. help!!

    This is correct.
    I wonder how it can be that in the System Preferences - Startup Disk - OS X volume can become "deselected" like it was... I had to re-highlight the OS X volume and all is well.
    b
    MBP & Mac Mini   Mac OS X (10.4.6)   http://www.therottenapple.net/phpbb

  • Weblogic.servlet.jsp.JspException: (line 1): Error in using tag library uri

    Previously my web app was running fine using eclipse 3.1
    When I upgraded my eclipse to 3.2 then built the same web app and deployed, upon running the url i got error
    weblogic.servlet.jsp.JspException: (line 1): Error in using tag library uri='/tags/css' prefix='css' : cannot find tag class
    Your help is appreciated.

              Hi Guys
              Problem is almost certainly because I've gone and defined the get as returning
              an int, (hence no property!)
              Apols
              J
              

  • Can't start WebLogic Server with SP6 and jdk1.2.2 using WebLogic Console

    Hi All,
    I am trying to install WebLogic 5.1 with SP6 under Windows NT 4.0 with SP6. My goal is to run JSP/Servlets. After going through all the steps described in SP6 Readme I am getting th following exception:
    ava.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
         at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
         at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
         at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
         at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
         at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
         at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1408)
         at weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:518)
         at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code)
         at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
         at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
         at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.Server.startServerDynamically(Server.java:99)
         at weblogic.Server.main(Server.java:65)
         at weblogic.Server.main(Server.java:55)
    The installation document is pretty bad intermixing different types of installations. Where can I find steps or what do I need to do to get WebLogic to run with JDK1.2.2 if I want to start it up from WebLogic console only?
    Thanks,
    Mark.

    Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
    and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
    -Alexis

  • Backup Failure using OEM (Oracle 9i)

    Backup Failure using OEM
    I have oracle 9i (windows 2000 server)
    I tried to make a fullbackup using OEM, it gives me NO error messages
    I got result file with 890 MB (my Db is not huge),
    but when I go back to the JOBs in OEM I found the status of the job FAILED
    I tried to do the same thing using incremental backup level 0, but I got the same result
    any Idea why the job didn't complete successfully
    thanx in advance

    Here is the deal.
    I need to be able to work in the OEM for my class. (Oracle DBA in Training) It is a significant part of my grade to be able to find the required help through forums like these to help me get the backup/recovery process to work through the OEM. My books deal with the OEM in a Win2000 Pro/Server environment, and don't take into consideration the variances in XP Pro. My install works great, other than I am receiving a "Fail" on my OEM Backups under Jobs. It further explains that I do not have the proper permissions to perform the backup job that was created. My instructor is completely hands off when it comes to help. So if anyone has run into this problem and been successful in fixing the problem without using a different utility. Please let me know.
    Thanks in advance,
    Vic

  • Backup Failure using OEM

    Backup Failure using OEM
    I have oracle 9i (windows 2000 server)
    I tried to make a fullbackup using OEM, it gives me NO error messages
    I got result file with 890 MB (my Db is not huge),
    but when I go back to the JOBs in OEM I found the status of the job FAILED
    I tried to do the same thing using incremental backup level 0, but I got the same result
    any Idea why the job didn't complete successfully
    thanx in advance

    Use command line -> rman .

  • WebLogic 12c : Use wlst to list coherence managed servers

    Hi,
    I would like to list only coherence managed servers via wlst. I tried various options and some workarounds work but they only work in certain conditions.
    Just curious as to how other use wlst to list out coherence managed servers.

    Yeah, you call that a solution, I call that an annoying workaround. I'm familiar with that "solution". Using it simply means that we acknowledge that NodeManager can't use the server config information for the admin server, it has to re-specify all of it again manually. I would assume that if you specified a particular classpath for the admin server in the server config, you'll have to manually specify that here also. What's even worse is that if your server config referenced "$CLASSPATH" in the string, so it can reference the implicit classpath that WebLogic itself needs, you may not be able to use "$CLASSPATH" here (I'm not certain about this), and would instead have to manually specify the full entire classpath that the admin server needs. If you didn't have to specify a particular classpath value for the admin server, then you're probably ok, on at least this point.

  • How to create users and groups using WLST Offline with Weblogic 8.1.4

    How to create users and groups using WLST Offline with Weblogic 8.1.4?
    Any ideas?

    Hi this is how i created a user using WLST Offline?
    cd('/Security/' + domainName)
    # Delete the default user name weblogic
    # incase you want to remove the defualt user weblogic
    delete('weblogic','User')
    # Creating a new user defined
    create(userName, 'User')
    # Setting the password of the user you created.
    cd ('/Security/' + domainName + '/User/' + userName)
    cmo.setPassword(password)
    Regards
    Makenzo

  • Apps taking longer to startup and use

    In my main OSX startup profile some apps Office, sometimes Safari, and others are taking longer than normal to startup and use. I booted into my administrator account and everything there is speedy so this appears to be a software issue somewhere. I am going to rebuild disk permissions, but I don think that will do the trick. It also takes years to perform this task in Snow Leopard. Tiger could do the job in half the time it takes Snow Leopard. Anyone got other suggestions to try? I am going to do some googling.
    Thanks,
    John

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Configuring weblogic domain for IAM using WLST

    Hi All,
    i have to configure a weblogic domain using wlst(off-line).i am able to do this by using wls.jar template but that domain does not contain all the deployable component which is required for IAM ,IDM.
    I don't know how to set the configuration component which is required for IAM,IDM as asked configuration wizard aske when we use GUI mode and how to give the schema details.
    please give any idea how to configure a domain(for IAM,IDM) using WLST exactly same as GUI mode .
    thanks

    I'm not sure what is your problem, but there is no compatibility issue between CSS and Bind normally.
    The docuement you referenced only says, in the background section, that the DNS server itself needs to be configured so part of your domain is handled by the CSS.
    So, your dns server handles all request for your.domain but there is one NS entry forwarding request for www.your.domain to the CSS so the CSS can answer the dns request.
    The css is not able to handle all types of dns request (ie: email server ip address request) so you can configure a 'dns forwarder' on the css to forward the request to another dns server.
    See the following for dns forwarder config example
    http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d3b52.shtml
    Regards,
    Gilles.
    Thanks for rating.

Maybe you are looking for