Weblogic 10g - Startup problem with authentication

I installed Weblogic 10g (latest release) and change the default password for weblogic user from the weblogic console, then I restarted the Oracle Weblogic server, but when It try to start give me an error:
starting weblogic with Java version:
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06)
Java HotSpot(TM) Client VM (build 10.0-b23, mixed mode, sharing)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_0\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=48m -XX:MaxPermSize=256m -Xverify:none -da -Dplatfor
m.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\server -Dweblogic.home=C:\
bea\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev=
-Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea\patch_w
ls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_cie660\profiles\d
efault\sysext_manifest_classpath -Dweblogic.Name=examplesServer -Djava.security.
policy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<09/09/2008 03:43:16 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) Client VM Version 10.0-b23 from Sun Microsyste
ms Inc.>
<09/09/2008 03:43:17 PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic
Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<09/09/2008 03:43:19 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to STARTING>
<09/09/2008 03:43:19 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing sel
f-tuning thread pool>
<09/09/2008 03:43:19 PM PDT> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\wlserver_10.3\samples\domains\wl_server\servers\examplesServer\l
ogs\examplesServer.log is opened. All server side log events will be written to
this file.>
<09/09/2008 03:43:23 PM PDT> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm myrealm.>
<09/09/2008 03:43:23 PM PDT> <Critical> <Security> <BEA-090402> <Authentication
denied: Boot identity not valid; The user name and/or password from the boot ide
ntity file (boot.properties) is not valid. The boot identity may have been chang
ed since the boot identity file was created. Please edit and update the boot ide
ntity file with the proper values of username and password. The first time the u
pdated boot identity file is used to start the server, these new values are encr
ypted.>
<09/09/2008 03:43:23 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server su
bsystem failed. Reason: weblogic.security.SecurityInitializationException: Authe
ntication denied: Boot identity not valid; The user name and/or password from th
e boot identity file (boot.properties) is not valid. The boot identity may have
been changed since the boot identity file was created. Please edit and update th
e boot identity file with the proper values of username and password. The first
time the updated boot identity file is used to start the server, these new value
s are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot i
dentity not valid; The user name and/or password from the boot identity file (bo
ot.properties) is not valid. The boot identity may have been changed since the b
oot identity file was created. Please edit and update the boot identity file wit
h the proper values of username and password. The first time the updated boot id
entity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
ource)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<09/09/2008 03:43:24 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FAILED>
<09/09/2008 03:43:24 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical s
ervice failed. The server will shut itself down>
<09/09/2008 03:43:24 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
I tried almost everything in these links:
https://support.bea.com/application_content/product_portlets/support_patterns/wls/AuthenticationErrorsStartingWLSPattern.html#Why_does_the_problem_occur_
http://forums.bea.com/thread.jspa?threadID=600017775
Also I tried to recovery the password but nothing works.
Please I really need help.

Hi all, I've the same problem...not resolved yet...may you help me, please?
Silvia
Starting e managed server from admin console, through node manager:
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.

Similar Messages

  • Problem with authentication in OBIEE

    Hello, I have a problem with authentication in OBIEE.
    A user who does not exist, enter the application and can enter but can not access almost anything, it is very rare because in addition webcatalog are created within the folder with your name and no one created it.
    any ideas?

    I created SR and i solved the problem.
    The problem wasn´t in weblogic. We migrated rpd 10g to 11g, I had define one initialization block session in RPD, when we disabled it, it´s running fine.
    Oracle recomended work in weblogic in obiee 11g
    best regards
    Edited by: Benito Camelas on Sep 29, 2011 7:12 AM

  • After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

    After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
    How can i do that?

    What did you "put as slave?" What Mac model do you have, exactly?

  • Startup problem with Lion OS 10.7.3

    Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
    I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
    This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
    I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
    I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
    Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
    Any thoughts? Thanks -

    Thanks -
    I've reinstalled the OS today and am back up and running.
    But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X.

  • Problems with authentication

    Good day
    I am having problems with authenticating my Adobe account when I try to download an ebook. Adobe does not recognise my ID or password when I put it in the authentication box of Kalahari.com ereader.
    Can you please assist in solving this?

    Contact Adobe Support either by chat or via phone.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Fulfilment server encountered a problem with authentication

    I am trying to create my first app using DPS app builder, all the step have been done correctly, however creating the app give the f
    ollowing error
    "The fulfillment server encountered a problem with authentication"
    Anyone face this before? how to solve this issue? I can't find anything in the guidline files

    Hello again
    The app rejected once again and here is the itunes message
    "We found that while you have submitted In App Purchase products for your app, the In App Purchase functionality is not present in your binary. "
    I am able test the development version of the app and I can see the folio inside it with an option to buy, I can't locate any error in the development side and I need more clarification from your side about the rejection, why the binary is rejected?
    There is nothing wrong from my side. my app is working on the testing version and everything is OK.
    You rejected the app because in-app purchase is not enabled as you claimed. but I can see the folio inside the app with an option to buy, nothing wrong and no error what so ever is facing me. why you rejected the binary?
    I really need your help to identify where the problem is, I have to get the viewer ready for sale July 1st. it is been rejected for couple of time and I am not sure why.
    Regards;
    Rafah Alkhatib
    CEO
    [email protected]
    http://www.reachsn.com
    Dubai, Riyadh, Amman

  • Apache/2.2.4 (Win32) + Weblogic 8.1 Problem with Module

    Hey together,
    i'm pretty new to this whole weblogic thing.
    I wanted to install the apache plugin for weblogic. I am using weblogic 8.1 and apache 2.2.4 on win xp sp2.
    I followed the instructions given in the tutorial at bea.com.
    When i try to test the conf-file via httpd.exe -t i get
    httpd.exe: Syntax error on line 116 of C:/Programme/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:
    /Programme/Apache Software Foundation/Apache2.2/modules/mod_wl_20.so into server: Das angegebene Modul wurde nicht gefun
    den.
    But the mod_wl_20.so file is definitley in this directory as all the other modules.
    This is the important part of my httpd.conf:
    <IfModule mod_weblogic.c>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicHost localhost
    WebLogicPort 7101
    MatchExpression *
    </Location>
    </IfModule>
    I even downloaded the latest version of this plugin without sucess. It's all 32 bit, so there should be no problems with that.
    I read through several topics/threads dealing with same problems but without success.
    Could any1 help please?
    Thanks in advance.

    Hi,
    What do you have on line 116 ? I have it setup on Win2k and it works fine with the following statements. Only difference is that I have Apache 2.0.54 (not 2.2.x)
    LoadModule weblogic_module modules/mod_wl_20.so
    <Location /wlPortal >
    SetHandler weblogic-handler
    WebLogicHost localhost
    WebLogicPort 7001
    </Location>
    Kevin.

  • JDeveloper 10g video problems with Windows Vista

    Hi,
    I'm using JDev 10g 10.1.3.3 over Windows Vista with Aero active. Since I started using Vista, I have always had problems with JDev. First, the fonts in the JDev panels would mess up and the scrolling would not work well. I made some changes in the way JDev uses the JDK, I don't remember exactly what I did, but I think I made the whole JDev environment to use a newer JDK, which is not engouraged/supported by Oracle. Since then, the scrolling problem was solved. But When I run my app, Aero stops working.
    Is there a way to make JDev 10g work perfectly with Vista?
    (No, I'm not willing to migrate to 11g, for several reasons, so I need to stick to 10g for now).
    Thanks!
    Brian
    Edited by: BrianBraun on Nov 12, 2008 7:08 AM

    Try the various tips on this thread:
    Using JDeveloper on Vista - some tips

  • Weblogic 10.0 Problems with stripes/struts

    When trying to deploy the sample application for the stripes framework on weblogic 10.0 I get the following error when deploying.
    <Dec 3, 2009 12:16:51 PM CET> <Error> <HTTP> <BEA-101165>
    <Could not load user defined filter in web.xml:
    net.sourceforge.stripes.controller.StripesFilter.net.sourceforge.stripes.exception.StripesRuntimeException:
    Problem instantiating default configuration objects.I actually had to switch to using the Sun JDK to get this error. JRockit does not report it, and just fails when I try to use the application. The problem appear to be weblogic 10.0 specific. No problems with jetty or tomcat, and I've heard reports that it is resolved in weblogic 10.3. Have ayone come accross similar problems when using stripes/struts on weblogic 10.0, and found a solution to this? Is there a patch available for 10.0 than fix this?
    Regards
    Morten
    PS: I have ommited the complete stack trace, since it is monstrously huge.

    Guess I was wrong in thinking that this was an isolated weblogic 10.0 problem. I just downloaded weblogic 10.3 and tried to deploy the same application there, and the same error happened.
    <03.des.2009 kl 15.12 CET> <Error> <HTTP> <BEA-101165>
    <Could not load user defined filter in web.xml:
    net.sourceforge.stripes.controller.StripesFilter.net.sourceforge.stripes.exception.StripesRuntimeException:
    Problem instantiating default configuration objects.
            at net.sourceforge.stripes.config.DefaultConfiguration.init(DefaultConfiguration.java:220)
            at net.sourceforge.stripes.config.RuntimeConfiguration.init(RuntimeConfiguration.java:272)
            at net.sourceforge.stripes.controller.StripesFilter.init(StripesFilter.java:125)
            at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:329)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            Truncated. see log file for complete stacktrace
    java.lang.NullPointerException
            at java.io.FilterInputStream.read(FilterInputStream.java:116)
            at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
            at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
            at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
            at java.io.InputStreamReader.read(InputStreamReader.java:167)
            Truncated. see log file for complete stacktraceSo is there anyone out there with experience with struts/stripes, that can tell why this does not work? If you need to try this yourself, you can download the stripes sample application here:
    http://sourceforge.net/projects/stripes/files/stripes/Stripes%201.5.2/stripes-1.5.2.zip/download
    There is an example WAR called "stripes-examples.war" in the zip that is ready to be deployed.
    Regards
    Morten
    PS: you still need to start weblogic with Sun JDK rather than JRockit to get the error. With JRockit the application simply fails when used.

  • J2SE 1.3 client - Weblogic 8.14 Problem with unmarshal exception

    Hi
    I have problem with using RMI IIOP with J2SE 1.3.1_01 - Weblogic 8.1 SP4. Client is runing good, methods are working perfectly, but when EJB throws my exception, it is not serialized and thrown on client but MarshalException is thrown.
    I did everything as it is in weblogic documentation and I really do not know what to do.
    Also I read in weblogic documentation this note:
    Limitations Using RMI-IIOP on the Client
    Use WebLogic Server with JDK 1.3.1_01 or higher. Earlier versions are not RMI-IIOP compliant. Note the following about these earlier JDKs:
    Do not correctly unmarshal unchecked exceptions.But I am using 1.3.1_01 ...
    When I run it with 1.4 it is of course running without problem.
    Martin
    My Exception :
    java.io.IOException:
         at com.sun.corba.se.internal.io.IIOPInputStream.throwExceptionType(Native Method)
         at com.sun.corba.se.internal.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:272)
         at com.sun.corba.se.internal.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:245)
         at com.sun.corba.se.internal.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:207)
         at com.sun.corba.se.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:1059)
         at com.upsscs.europe.cdmv.spl.ejb.service._SBTelnetKitting_Stub.getPickList(Unknown Source)
         at Pokus.main(Pokus.java:59)
    java.rmi.MarshalException: CORBA MARSHAL 0 No; nested exception is:
         org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : minor code: 0 completed: No
    org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : minor code: 0 completed: No
         at com.sun.corba.se.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:1065)
         at com.upsscs.europe.cdmv.spl.ejb.service._SBTelnetKitting_Stub.getPickList(Unknown Source)
         at Pokus.main(Pokus.java:59)
    Exception in thread "main"

    Hi,
    I am sending the supported configuration link
    please go through it.
    http://e-docs.bea.com/platform/suppconfigs/configs81/81_over/overview.html#1146550
    Regards
    Prasanna Yalam

  • Problems with authenticated smtp on Mac mail 2

    I do support for a small ISP and we are seeing problems with Mac Mail authenticating to the smtp server. The settings that should work are:
    outgoing server: asmtp.gorge.net
    Username: full email address
    Outgoing server port: 2525 or 587
    We typically turn on password for the authentication type. In some customers, nothing seems to work. They get an error that their email address can't authenticate. Any ideas on what settings might work for this?

    Teri,
    Reading the guidance for Outlook Express, I note:
    "Step 11. On the Servers tab under Outgoing Mail Server, check the box titled My server requires authentication. Then go to the Advanced tab. Below select the option use same settings as incoming server. (emphasis added)"
    In Mail, this is normally the same as specifying authentication of None, and not entering the Username or Password again for the Outgoing Server. This type of authentication, does not result in appending the Username entry (Username corresponds to Account Name in Outlook Express). Mail will authenticate to the SMTP with the Username and Password used for the Incoming, if prompted by the server, and the separate, hard, (and redundant) authentication resulting from using Password in the Outgoing Server entry boxes will cause a failure. However, this type of authentication (which is often called SMTP after POP3, or POP3 before SMTP) is normally conducted on Port 25. In my experience, the use of Port 587 is meant for those SMTP that must have a separate authentication, and where you will see the name altered to include the Username. Hopefully this will work with Port 2525, but I have not confirmed. SMTP after POP3 authentication does not help sending from remote providers, such as found in internet cafes, and this is why some ISPs provide a SMTP that does require separate, Password Authentication.
    In the new Mail Setup Assistant, there is now the option to specify to use the same settings, but not enter the Username and Password -- this is not obvious, but well known by some ISPs, but not all -- this is really the same as changing to None in an existing account, and removing the Password and Username entries. Also, in Mail, I would NOT expect any default names to appear, unlike what your Mac Mail instructions imply.
    Keep me posted.
    Ernie

  • Startup Problems with CQ5.6, Java 1.7, and OSX 10.8

    I'm having a problem with installing CQ5.6 on OSX 10.8 with Java 1.7.  Installing with Java 1.6 is ok, and on OSX 10.7 is ok, but the combo of 10.8 and java 1.7 is having problems.  I've found two issues, but it hasn't gotten us to a solution:
    1) Just out of the box, I get an error connecting to the repository, with the root cause :
    Caused by: java.io.IOException: Could not create a listener on any of the following ports: [8088, 8089, 8090, 8091, 8092, 8093], and could not connect to another cluster node
    I then found this answer: http://www.eyelock.net/blog/archives/490 - and tried starting up with that JVM startup param.
    2) Then, the IOException went away, but was left with the Unknown Host Exception - described here: http://blogs.adobe.com/dmcmahon/2012/09/03/cq5-5-javax-jcr-repositoryexception-unable-to-r egister-data-store-in-cluster/
    After modifying the hosts file and restarting, I'm still having problems.  Anyone else have problems with this combo?
    Thanks in advance.
    - David

    Hi David,
        The envirnoment you are running does it have internet connection?  Please try with adding alias[1].  If does not solve let us know exact stack trace.
    [1]    sudo ifconfig en0 alias 127.0.0.1   
    Thanks,
    Sham

  • 6i - 10G migration problem with sdo_geometry.srid

    I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
        update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
    Error 801, at line 0, column 0
    Internal error [60513]
    Seems Forms 10G can't handle geometry types which 6i could.
    Do I have to move this code to the server of is there another way to handle this?
    Rene

    I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
        update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
    Error 801, at line 0, column 0
    Internal error [60513]
    Seems Forms 10G can't handle geometry types which 6i could.
    Do I have to move this code to the server of is there another way to handle this?
    Rene

  • Startup Problems with my  iMac

    I am trying to troubleshoot a startup problem on my iMac and can't seem to get it to boot at all. The problem began last night when I tried to the whole HD to a previous time point in Time Machine. I only went back to earlier the same day to correct another issue that I inadvertently created. In an attempt to keep this short, I will stick to the facts.
    Last night I started the restore process by booting from the OSX dvd and then restoring the machine from a TM backup from earlier in the day. (external firewire drive) Everything seemed to be moving along fine with the estimated completion time several hours away, so I went to bed. This morning I woke up to find my machine will not start up. I get the normal chime and the white screen but then it is as if a gray curtain falls down the screen and soon after a dark gray square appears in the middle with the instructions to turn off the machine and re-start it, in several languages. This happens whether or not the OSX DVD is inserted and regardless of any keys (shift,c I've tried so far) that are held during startup. I am trying to startup from the original disc that came with the machine (OSX 10.5.6), but I get the same result if the disc is ejected and I try to startup from the HD. All peripherals have been removed.
    What am I missing? What is the trick to getting the machine to boot from the DVD?

    Success! Not sure what happened, but this time I started up from the 10.6 dvd (SL) (instead of the 10.5 that the machine shipped with) and did the restore from Time Machine (same as previous attempts). This time it seemed to work and when I restarted the iMac, it came up like normal.
    Thanks for the link Carolyn. I did do disk utility a couple of times and it consistently came back OK. It's now going through a very long TM backup, I guess it must be a new one even though all the previous ones are still there in the TM viewer.

  • Indesign CS5 crash during startup - problem with Graphics.rpln

    I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
    "Adobe Indesign CS5 has stopped working"
    We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
    -=-=-=-=-=-=-=-=-=-=-===-=-
    Fault bucket 1848500921, type 1
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: InDesign.exe
    P2: 7.0.0.355
    P3: 4bad00be
    P4: GRAPHICS.RPLN
    P5: 7.0.0.355
    P6: 4bad03d3
    P7: c0000005
    P8: 0004e1e2
    P9:
    P10:
    Attached files:
    C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
    These files may be available here:
    C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
    Report Status: 0
    -=-=-=-=-=-=-=-=-=-=-===-=-
    I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
    None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
    Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

    Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

Maybe you are looking for

  • Any Body who can help me

    I want to maximize the Report's window + Forms parameter window as we can maximize our forms by set_window_property() method. null

  • I can't download adobe creative cloud for desktop,error no 50

    i can't download adobe creative cloud for desktop,error no 50

  • SCCM 2012 R2 Power Management - Machine Wake Up Time is Randomly Offset

    We have recently migrated to SCCM 2012 R2 from SCCM 2007 R3. Since moving the clients to the SCCM 2012 R2 server I have noticed that the Power Management Wakeup Timer is not working as it used to. Power Management is configured as follows: Peak Hours

  • Viewing Hidden Files?

    I'm having problems with updating my iPod and have been told to tell my computer to "view hidden files." This advice is coming from a Windows user, and apparently it's much easier to do this on a Windows machine. Even with a help search, I'm not turn

  • Disable New Window Animation in Lion

    In Lion when you open up a new window, instead of just appearing like it did in 10.6 it animates getting bigger from the background. Any way to get rid of that?