6i - 10G migration problem with sdo_geometry.srid

I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
Error 801, at line 0, column 0
Internal error [60513]
Seems Forms 10G can't handle geometry types which 6i could.
Do I have to move this code to the server of is there another way to handle this?
Rene

Similar Messages

JDeveloper 10g video problems with Windows Vista

Hi,
I'm using JDev 10g 10.1.3.3 over Windows Vista with Aero active. Since I started using Vista, I have always had problems with JDev. First, the fonts in the JDev panels would mess up and the scrolling would not work well. I made some changes in the way JDev uses the JDK, I don't remember exactly what I did, but I think I made the whole JDev environment to use a newer JDK, which is not engouraged/supported by Oracle. Since then, the scrolling problem was solved. But When I run my app, Aero stops working.
Is there a way to make JDev 10g work perfectly with Vista?
(No, I'm not willing to migrate to 11g, for several reasons, so I need to stick to 10g for now).
Thanks!
Brian
Edited by: BrianBraun on Nov 12, 2008 7:08 AM

Try the various tips on this thread:
Using JDeveloper on Vista - some tips

Topology having problem with 8307 SRID

Hi,
i am having an a small problem when i am creating topology with 8307 SRID.
first of all i loaded data into spatial with 82364 SRID and validated all my counties and created topology and its working fine. and showing me properly in mapbuilder
then same data i converted it to 8307 Longitude / latitude coordinate system and created topology the topology is created but when i view in mapbuilder its showing me not clean topology and when i zoom in zoom out its removing the color of faces and giving warning in mapbuilder Next edge (47) is null. Face (21) polygon discarded.
here is the process how i completed for 8307 SRID
-- Deregister feature layers, if they were registered.
-- Unioned_counties is a feature layer we will create in the next code example.
EXECUTE SDO_TOPO.DELETE_TOPO_GEOMETRY_LAYER ('ADMIN_TOPO_8307', 'KSA_COUNTIES_TOPO_8307', 'FEATURE');
-- Drop the topology if it exists, then create the topology
EXECUTE SDO_TOPO.DROP_TOPOLOGY ('ADMIN_TOPO_8307');
EXECUTE SDO_TOPO.CREATE_TOPOLOGY ('ADMIN_TOPO_8307', 0.5, 8307);
-- Fix incorrectly set bounds
update user_sdo_geom_metadata
set diminfo =
SDO_DIM_ARRAY(
SDO_DIM_ELEMENT( 'Easting', 35.5743686, 17.3556645, 0.5),
SDO_DIM_ELEMENT( 'Northing', 56.6621451, 33.144374, 0.5)
where table_name like 'ADMIN_TOPO_8307_%$';
commit;
--//34.5743686, 16.3556645, 55.6621451, 32.144374
-- Insert the universal face for an empty topology
INSERT INTO ADMIN_TOPO_8307_face$ (face_id,
boundary_edge_id,
island_edge_id_list,
island_node_id_list,
mbr_geometry)
VALUES (-1, NULL, SDO_LIST_TYPE(), SDO_LIST_TYPE(), NULL);
commit;
-- Create an Oracle table with a feature layer.
-- Each feature will represent a county.
DROP TABLE ksa_counties_topo_8307;
CREATE TABLE ksa_counties_topo_8307 (id number,
     type VARCHAR2(1),
                    region_name     varchar2(200),
                    county_name varchar2(200),
                    population     number,
                    saudi_males     number,
                    saudi_females     number,
                    non_saudi_males     number,
                    non_saudi_females     number,
     feature      SDO_TOPO_GEOMETRY);
-- Register feature layer with topology
EXECUTE SDO_TOPO.ADD_TOPO_GEOMETRY_LAYER('ADMIN_TOPO_8307', 'KSA_COUNTIES_TOPO_8307', 'FEATURE', 'POLYGON');
-- Create updatable TOPO_MAP object and load the whole topology in cache.
-- Since we just created the topology, the cache will be empty.
EXECUTE SDO_TOPO_MAP.DROP_TOPO_MAP('my_sample_map_cache');
EXECUTE SDO_TOPO_MAP.CREATE_TOPO_MAP('admin_topo_8307', 'my_sample_map_cache');
EXECUTE SDO_TOPO_MAP.LOAD_TOPO_MAP('my_sample_map_cache', 'true');
DECLARE
CURSOR c1 IS SELECT fid_, geom FROM XX_C_8307_8307;
topo_geom SDO_TOPO_GEOMETRY;
BEGIN
FOR r IN c1 LOOP
topo_geom := SDO_TOPO_MAP.CREATE_FEATURE('ADMIN_TOPO_8307',
'KSA_COUNTIES_TOPO_8307',
'FEATURE',
r.geom);
-- Associate topological primitives with features
INSERT INTO ksa_counties_topo_8307 (id,feature)
VALUES (r.fid_, topo_geom);
-- Commit so I can watch from other session
commit;
END LOOP;
END;
-- Commit topology changes.
EXECUTE SDO_TOPO_MAP.COMMIT_TOPO_MAP;
EXECUTE SDO_TOPO_MAP.DROP_TOPO_MAP ('my_sample_map_cache');
-- Check how many counties were converted
SELECT COUNT(*) FROM ksa_counties_topo_8307;
-- After an initial bulk load into an empty topology, initialize_metadata
EXECUTE SDO_TOPO.INITIALIZE_METADATA ('ADMIN_TOPO_8307');
please some one help me in this issue
Thanks
Kabeer

i am sure there is no problem in conversion because after converting i validated the data and checked with world file. its exactly fitting in the place where it has to go.
if you don't mind and tell me which version oracle you are using and can you just go through topology for this data your side.
Thanks
Kabeer

Iphoto migration problems with faces

I recently attempted to migrate my iPhoto Library from my old iMac to my new MBP by copying it to an external drive and then copying that to the MBP hard drive. The iMac was running iPhoto 9 (couldn't upgrade the OS due to RAM limitations) and the MBP is running iPhoto 11. The original library had a minor problem with Faces in that it would always identify a few faces for certain people but even after hitting "confirm" it would still leave those as unconfirmed. A minor annoyance and I didn't really care. Since transferring it however, Faces on the MBP takes literally 5-10 minutes to close once I hit "save" after confirming faces. If I click on the icon in the dock during that time it says "Application Not Responding." In addition, some of the faces are now blank boxes with dashed lines around them.
I've run through all the repair options within iPhoto (via the command-option menu when starting it) including a rebuild. When that didn't help I rebuilt the library with iPhoto Library Manager. Now it doesn't recognize any unconfirmed faces as belonging to anyone whom I've already categorized. I did upload new photos, tagged a couple faces and it didn't recognize that the same face in the same scene in another photo was likely the same person as in the previous 4 photos. Weird. Stranger still is that Faces now has tagged a bunch of people with the wrong names. So I open up Aunt Jane's Faces folder and there's the faces of Uncle Mark, Cousin Pete, etc. Clearly something is corrupted. I could just go back to using the old Library on the iMac and hope it doesn't totally kick the bucket but it's never been the same since I upgraded it to Mountain Lion and I'd really like to have access to my photos on my MBP. Any suggestions? TIA.

Hi, can't be on 10.3, what is the OSX version you're on?
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot & hold option or alt key when opening iPhoto.
Any change?

ORA-12952 and Oracle 10g XE problem with migration to 11g XE

Hi, all
My DB (Oracle 10g XE) reach storage limit. I have tried to migrate to 11g XE version but unsuccessful.
For migration I used next manual: http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#XEINW136
expdp returned next error:
Processing object type DATABASE_EXPORT/SCHEMA/CLUSTER/INDEX
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.CREATE_OBJECT_ROWS while calling FORALL [TABLE]
ORA-12952: The request exceeds the maximum allowed database size of 4 GB
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 116
ORA-06512: at "SYS.KUPW$WORKER", line 6248
----- PL/SQL Call Stack -----
object line object
handle number name
2D6F0304 14916 package body SYS.KUPW$WORKER
2D6F0304 6300 package body SYS.KUPW$WORKER
2D6F0304 5638 package body SYS.KUPW$WORKER
2D6F0304 2145 package body SYS.KUPW$WORKER
2D6F0304 6861 package body SYS.KUPW$WORKER
2D6F0304 1262 package body SYS.KUPW$WORKER
285BD50C 2 anonymous block
Next I have tried to garbage some information from DB but I got some as "UNDO cannot get next block" error.
What else can I do to migrate the data from 10g with limitation problem to 11g?
Thank You in advance.

There is output from SQL:
"OWNER"; "TABLESPACE_NAME"; "COUNT(*)"; "SIZE_MB"
"A1"; "USERS"; "899"; "3995,9375"
"SYS"; "SYSTEM"; "980"; "323,1875"
"FLOWS_020100";"SYSAUX"; "658"; "297,625"
"SYS"; "SYSAUX"; "626"; "151,125"
"XDB"; "SYSAUX"; "753"; "84,5"
"SYSTEM";"SYSTEM"; "259"; "31,75"
"SYS"; "UNDO"; "10"; "20,25"
"MDSYS"; "SYSTEM"; "96"; "12,25"
"SYSTEM";"SYSAUX"; "109"; "6,8125"
"CTXSYS";"SYSAUX"; "74"; "4,625"
"D1"; "USERS"; "14"; "3,5625"
"DBSNMP";"SYSAUX"; "25"; "1,5625"
"HR"; "USERS"; "25"; "1,5625"
"FLOWS_FILES";"SYSAUX"; "7"; ",5"
"OUTLN"; "SYSTEM"; "8"; ",5"
"TSMSYS";"SYSAUX"; "4"; ",25"
1. When I tried to delete some old data from USERS dataspase by some PROCEDURE I got the next error:
ERROR at line 1:
ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDO'
This problem I solved. PROCEDURE generate huge buffer for transaction. Therefore I deleted the old data by small pieces.
After I have deleted the old data the Application start to comunicate with database without ORA-12952 error.
2. I've reduced the size of SYSAUX (http://remidian.com/oracle/purging-sysaux-tablespace-purging-awr-reports.html) down to 94%
3. I has SYSTEM tablespace 100% full. When I've tried to resize the SYSTEM table up I got the ORA-12952. Then I've increased the SYSTEM table size by 1M. In such way I got additional 9Mb for the SYSTEM tablespace (from 360Mb to 369Mb 98%). Is any other way to reduce of the SYSTEM tablespace filling?
4. Next (http://wiki.oracle.com/page/Data+Pump+Export+%28expdp%29+and+Data+Pump+Import%28impdp%29)
on the step: $ expdp system/<password> DIRECTORY=expdp_dir DUMPFILE=expfull.dmp FULL=y LOGFILE=expfull.og
i got the error:
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.CREATE_OBJECT_ROWS while calling FORALL [TABLE]
ORA-12952: The request exceeds the maximum allowed database size of 4 GB
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 116
ORA-06512: at "SYS.KUPW$WORKER", line 6248
There is my last state of the tablespace filling:
"Tablespace"; "Size (MB)"; "Free (MB)"; "% Free"; "% Used"
"UNDO"; "500"; "411,6875"; "82"; "18"
"SYSAUX"; "570"; "31,5"; "6"; "94"
"USERS"; "4180"; "178,875"; "4"; "96"
"SYSTEM"; "369"; "1,25"; "0"; "100"
"TEMP"; "291"; "0"; "0"; "100"

10g to 11g migration - problem with JhsCollectionModel

I'm trying to migrate a JHS app from Jdev 10.1.3.4 to 11.1.1.2. The only thing worthy of note about the app is that it uses Custom authentication and authorization. Steps I went thru are below. Note that I haven't installed the latest release posted today.
In Jdev 10.1.3.4:
Create a new app with only one entity/VO.
Enable JHS, do app definition with no changes other than selecting Custom authentication and authorization. Run app generator.
Validate app runs successfully.
In Jdev 11.1.1.2:
Open app.
Use ADF migration wizard as is - no changing of any defaults.
Get migration successful messages. There were some errors about the .vm templates and some warnings but nothing significant.
Reenable JHs for this project, select Overwrite for all and answer yes to question Do you want to migrate the Application Structure file from version 10.1.3 to 11.1.1?
Run application generator with below result.
Error: Unable to find the jar file on the source or class path...\path\jhsadfrt-11.1.1.jar....Would you like to add? Answered yes
Get one error: JAG-00149 [ TamJhsModule ] Main Controller Config file cannot be named faces-config.xml.
Modified application definition and changed name for faces-config.xml file
Run application generator again. This time it finishes successfully - just a couple of warnings about the optimistic locking mode and menu model file not being generated.
Make all and get one error:
Error(19,8): com.guideworks.tv.model.client.TamJhsModuleClient is not abstract and does not override abstract method applyBindParams(java.lang.String,java.util.HashMap,java.lang.Boolean) in oracle.jheadstart.model.adfbc.v2.JhsApplicationModule
Fix error by adding an empty override method for the applyBindParams
Make all with no errors.
Try to run application and get errors (after dashed line below). Cause appears to be missing class.
Caused By: java.lang.ClassNotFoundException: oracle.jheadstart.controller.jsf.bean.JhsCollectionModel
Looking in jhsadfrt-11.1.1.jar, I see that the class doesn't exist.
=====================================================
Errors from run of application.
*** Using port 7101 ***
"C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\oracle\MIDDLE~3\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~3\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~3\JDK160~1.5-3\lib\tools.jar;C:\oracle\MIDDLE~3\utils\config\10.3\config-launch.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~3\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~3\modules\ORGAPA~1.0/lib/ant-all.jar;C:\oracle\MIDDLE~3\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\oracle\MIDDLE~3\patch_wls1032\profiles\default\native;C:\oracle\MIDDLE~3\patch_jdev1111\profiles\default\native;C:\oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32;C:\oracle\MIDDLE~3\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~3\modules\ORGAPA~1.0\bin;C:\oracle\MIDDLE~3\JDK160~1.5-3\jre\bin;C:\oracle\MIDDLE~3\JDK160~1.5-3\bin;C:\orant\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\WiFi\bin\;C:\orant\jdk\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Windows Imaging\;C:\oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
Starting WLS with line:
C:\oracle\MIDDLE~3\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\oracle\MiddlewareR2\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\oracle\MIDDLE~3\WLSERV~1.3 -Dwls.home=C:\oracle\MIDDLE~3\WLSERV~1.3\server -Dweblogic.home=C:\oracle\MIDDLE~3\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=C:\oracle\MIDDLE~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=\modules\oracle.ossoiap_11.1.1,\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\oracle\MIDDLE~3\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\oracle\MIDDLE~3\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Jun 3, 2010 1:14:27 PM MDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 14.0-b16 from Sun Microsystems Inc.>
<Jun 3, 2010 1:14:27 PM MDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 3, 2010 1:14:29 PM MDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00031. Log messages will continue to be logged in C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Jun 3, 2010 1:14:35 PM MDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 3, 2010 1:14:46 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 3, 2010 1:14:46 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 3, 2010 1:14:57 PM MDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 3, 2010 1:14:57 PM MDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00028. Log messages will continue to be logged in C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Jun 3, 2010 1:14:57 PM MDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.210.2.26:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 36845 ms.
IntegratedWebLogicServer started.
[Running application tamjhssec on Server Instance IntegratedWebLogicServer...]
[01:15:04 PM] ---- Deployment started. ----
[01:15:04 PM] Target platform is (Weblogic 10.3).
[01:15:05 PM] Retrieving existing application information
[01:15:06 PM] Running dependency analysis...
[01:15:06 PM] Deploying 2 profiles...
[01:15:11 PM] Wrote Web Application Module to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\tamjhssec\ViewControllerWebApp.war
[01:15:12 PM] Wrote Enterprise Application Module to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\tamjhssec
[01:15:13 PM] Deploying Application...
<Jun 3, 2010 1:15:14 PM MDT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application tamjhssec is not versioned.>
<Jun 3, 2010 1:15:23 PM MDT> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\tamjhssec\ViewControllerWebApp.war. Please make sure that the annotations are valid. The error is oracle.jheadstart.controller.jsf.bean.JhsCollectionModel>
<Jun 3, 2010 1:15:24 PM MDT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1275592513661' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'tamjhssec-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'tamjhssec-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:378)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.jheadstart.controller.jsf.bean.JhsCollectionModel
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
<Jun 3, 2010 1:15:25 PM MDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'tamjhssec'.>
<Jun 3, 2010 1:15:25 PM MDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'tamjhssec-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:378)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.jheadstart.controller.jsf.bean.JhsCollectionModel
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
[01:15:26 PM] #### Deployment incomplete. ####
[01:15:26 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application tamjhssec due to error deploying to IntegratedWebLogicServer.
[Application tamjhssec stopped and undeployed from Server Instance IntegratedWebLogicServer]
Edited by: Tammy Osborn on Jun 3, 2010 1:16 PM

Tammy,
JhsCollectionModel no longer exists in release 11. It is replaced by the TableBean class.
If you generate your application with the default templates, there should be no reference to JhsCollectionModel anymore.
May be you are using a custom template that uses a managed bean that still references this class?
If you search your ViewController project for JhsCollectionModel, what entries do you find?
Steven Davelaar,
JHeadstart Team.

CUCM 8.6(2) migration problem with external calls

Hello all.
Yesterday we have migrated our telephone infrastructure from CM4.x to CUCM8.6(2), after some weeks of tests.
Yesterday night all seems to work properly, all phone updated and registered, external calls going out and in.
But from this morning, with all users at work, it appears a strange problem, that until now I couldn't solve: randomly all external calls go down.
I can't address this problem, since gateways (all cisco 2811 routers) are the same and with same configuration as yesterday.
All thing that I can think is that router that seems to cause the problem is configured not with mgcp by cucm, but with h323 route inside the router.
Any suggestions will be greatly appreciated.
Daniele

GW says normal call clearing.
But, maybe I've addressed the problem.
I've found a bug fixed into latest cucm release (8.6(2a)SU1) that say "h.323 calls improperly disconnected".
So I'm trying to upgrade from 8.6(2a) to 8.6(2a)SU1, but process fails :-(
I've tried from a dvd and also loading iso image from sftp, but after few minutes appears an error
08/04/2012 09:43:55 upgrade_install.sh|Started auditd...|
08/04/2012 09:43:56 upgrade_install.sh|Started setroubleshoot...|
08/04/2012 09:43:56 upgrade_install.sh|Changed selinux mode to enforcing|
08/04/2012 09:43:56 upgrade_install.sh|Cleaning up rpm_archive...|
08/04/2012 09:43:56 upgrade_install.sh|Removing /common/rpm-archive/8.6.2.21900-5|
08/04/2012 09:43:56 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|
08/04/2012 09:43:56 upgrade_install.sh|set_upgrade_result: set to 1|
08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|
08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 1286).|
08/04/2012 09:43:56 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 1286)|
I've rebooted server yet and problem remains.
Thanks for any other suggestions.
Daniele

Filenet Archive to SAP Migration - Problem with DMS_KPRO_CONVERT2

Hi there
We seem to be having an issue with a Filenet RFC to SAP Content Server migration.
We run the report DMS_KPRO_CONVERT and eveything seems to run fine.
When we run DMS_KPRO_CONVERT2 to move the files, we seem to pick up an error:
File /saparchive/DV2/username (where username is my username) cannot be opened
In looking at what is happening, it seems to save the file to the filenet archive exchange directory as the username (with no file extension) however it seems that the system has problems accessing this directly to check the file in to the new repository again and fails.
If I manually check out the file and check it into the sap content server, there is no problem so it doesn't seem to be an issue that either the SAP content server or the filenet server is not accessible.
Any ideas what the issue could be?
Regards,
Athol

Hi Athol,
You have marked this question as answered so can you please help me How you have overcome this issue?
Do we have to run both DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 reports while migrating DMS documents from Content server to other archive server?
Thanks in advance!
With Regards,
Ajay

2010 to 2013 migration problem with service application

With a 3rd party migrator we are able to migrate a simple 2010 site to 2013. By simple UI level approach sites are migrated easily. But we have a large project where we have good amount of work done on various service applications.
We are facing problem to migrate entire 2nd SP2010 application with service applications. Do any one has idea of smooth migration of large service applications to 2013 with avepoint or quest tools?
If faced same problem then share steps.

The Microsoft guidance for upgrading a SP2010 farm to SP2013 is in the link below. Most of your existing SharePoint out of the box service applications can be upgraded also. This includes User Profile Service Application and the Search Service Application.
Custom service applications most likely not upgradeable. Hopefully the guidance was followed so there should be no problems.
http://technet.microsoft.com/en-us/library/cc262483(v=office.15).aspx
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

MSAccess to Oracle 10g Migration Problem

I have exported an Access 2000 database (2 tables) to XML using Oracle SQL Developer (v1.2.1). It successfully creates
However, when I then go to Migration => Capture MS Access Exported XML, I find it is greyed-out and cannot be selected.
I then attempted to use the "Quick Migrate" feature. The pre-migration verification passes with no problems. The program then creates a repository but ends without moving on to the next section ("Capture"). From there, I'm left with a series of tables with an "md_" prefix, but all are empty.
Any help you can provide would be appreciated.
Steve

Tank you Hilary;
i did this steps :
1) Close SQL Developer
2) Create a sqldeveloper.cmd file in the SQL Developer root directory
3) With the following contents
SET ORACLE_HOME=%CD%
start sqldeveloper.exe
4) Run sqldeveloper.cmd
but i still get the message :
java.lang.Exception: oracle.dbtools.metadata.persistence.PersistenceException: Violation de protocole
     at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:141)
     at oracle.dbtools.migration.workbench.core.CaptureInitiator.launch(CaptureInitiator.java:93)
     at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:140)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: oracle.dbtools.metadata.persistence.PersistenceException: Violation de protocole
     at oracle.dbtools.metadata.persistence.PersistableObject.doInsert(PersistableObject.java:238)
     at oracle.dbtools.metadata.persistence.PersistableObject.save(PersistableObject.java:172)
     at oracle.dbtools.migration.workbench.core.BasicMigrationStorer.storeObject(BasicMigrationStorer.java:51)
     at oracle.dbtools.migration.capture.CaptureWorker.storeConnection(CaptureWorker.java:596)
     at oracle.dbtools.migration.capture.CaptureWorker.runCapture(CaptureWorker.java:215)
     at oracle.dbtools.migration.workbench.core.ui.CaptureRunner.doWork(CaptureRunner.java:65)
     at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.run(AbstractMigrationProgressRunnable.java:161)
     at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.run(MigrationProgressBar.java:569)
     at java.lang.Thread.run(Thread.java:595)
tanks for your help :)

Migration problems with Tomcat 4.1.10. Please help.

Product:           Java Web Application
Operating system:     Redhat Linux 7.3
Web Server:          Apache 1.3.x
Application server:     Tomcat 4.1.10
Database server:     MySQL 3.23.x
Java Architecture:     JSP (presentation) + Java Bean (Business logic)
JDK version:          1.3.1_04
Hi,
     When we tried to migrate our application from Tomcat 4.0.4 to Tomcat 4.1.10, we found that the relative path references like ../xyz/ab.jsp are not properly interpreted by Netscape and the url seen on the address bar is something like this (http://www.sww.com/../xyz/ab.jsp. Also dynamic jsp forwarding support seems to have changed. While forwarding, the dynamic parameters attached are automatically url encoded. We have tested our application on Tomcat 4.0.4, there were no such issues. Since we have used these sort of things in many places in our application it will be difficult for us to change in all those places. Can anybody tell us what we can do about it?
thanks in advance,
Srikanth. S.

Hi,
http://www.xyz.com/swiz/test.jsp:
<%
response.sendRedirect("../sebase/common_login.jsp");
%>
When I run http://www.xyz.com/swiz/test.jsp with the above code, the url is displayed http://www.xyz.com/swiz/../sebase/common_login.jsp in Netscape address bar when the application is run on tomcat 4.1.10. With Internet explorer and opera, it reads http://www.xyz.com/sebase/common_login.jsp. But on Tomcat 4.0.4, there is no problem even with Netscape. Since we are tracking the urls in many places in our application, we are having problem because of the above said type of url interpretation.
thanks in advance,
Srikanth. S.

Weblogic 10g - Startup problem with authentication

I installed Weblogic 10g (latest release) and change the default password for weblogic user from the weblogic console, then I restarted the Oracle Weblogic server, but when It try to start give me an error:
starting weblogic with Java version:
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06)
Java HotSpot(TM) Client VM (build 10.0-b23, mixed mode, sharing)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_0\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=48m -XX:MaxPermSize=256m -Xverify:none -da -Dplatfor
m.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\server -Dweblogic.home=C:\
bea\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev=
-Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea\patch_w
ls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_cie660\profiles\d
efault\sysext_manifest_classpath -Dweblogic.Name=examplesServer -Djava.security.
policy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<09/09/2008 03:43:16 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) Client VM Version 10.0-b23 from Sun Microsyste
ms Inc.>
<09/09/2008 03:43:17 PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic
Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<09/09/2008 03:43:19 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to STARTING>
<09/09/2008 03:43:19 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing sel
f-tuning thread pool>
<09/09/2008 03:43:19 PM PDT> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\wlserver_10.3\samples\domains\wl_server\servers\examplesServer\l
ogs\examplesServer.log is opened. All server side log events will be written to
this file.>
<09/09/2008 03:43:23 PM PDT> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm myrealm.>
<09/09/2008 03:43:23 PM PDT> <Critical> <Security> <BEA-090402> <Authentication
denied: Boot identity not valid; The user name and/or password from the boot ide
ntity file (boot.properties) is not valid. The boot identity may have been chang
ed since the boot identity file was created. Please edit and update the boot ide
ntity file with the proper values of username and password. The first time the u
pdated boot identity file is used to start the server, these new values are encr
ypted.>
<09/09/2008 03:43:23 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server su
bsystem failed. Reason: weblogic.security.SecurityInitializationException: Authe
ntication denied: Boot identity not valid; The user name and/or password from th
e boot identity file (boot.properties) is not valid. The boot identity may have
been changed since the boot identity file was created. Please edit and update th
e boot identity file with the proper values of username and password. The first
time the updated boot identity file is used to start the server, these new value
s are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot i
dentity not valid; The user name and/or password from the boot identity file (bo
ot.properties) is not valid. The boot identity may have been changed since the b
oot identity file was created. Please edit and update the boot identity file wit
h the proper values of username and password. The first time the updated boot id
entity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
ource)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<09/09/2008 03:43:24 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FAILED>
<09/09/2008 03:43:24 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical s
ervice failed. The server will shut itself down>
<09/09/2008 03:43:24 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
I tried almost everything in these links:
https://support.bea.com/application_content/product_portlets/support_patterns/wls/AuthenticationErrorsStartingWLSPattern.html#Why_does_the_problem_occur_
http://forums.bea.com/thread.jspa?threadID=600017775
Also I tried to recovery the password but nothing works.
Please I really need help.

Hi all, I've the same problem...not resolved yet...may you help me, please?
Silvia
Starting e managed server from admin console, through node manager:
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.

Migration Problems with Time Capsule and New MacBook Pro

Hopefully someone on here can help with with this problem I'm having. I just bought the new 13' MacBook Pro this week from the store and I no longer have my old MacBook Pro. I have a Time Capsule with complete backups of my old MacBook Pro and I also have the internal hard drive from it as well.
I had installed the beta version of Mountain Lion on the old MacBook Pro and the new one still has Lion.
The problem is that every time I have tried to use the Migration Assistant (and I've tried 3 times now) my files and applications are getting messed up.
iPhoto won't open. It says that it needs to be updated but when I check to update it it says that there is no update needed.
I'm seriously about to beat my head against the wall because every time I migrate the data it takes about 12 hours. I'm thinking at this point that it might be easier for me to just swap out the internal hard drives in the units because it is possibly an issue with the OS' and wait until next month to try migrating to the new drive again after Mountain Lion is officially launched.

Bob,
I appreciate your honest and prompt response. I was VERY SPECIFIC when I told the sales rep I was hoping to use the Time Capsule with two different MacBook Pro's on different subnets (one is behind a firewall on a router, one is directly connect to a WAN side IP with no firewall) and the sales rep made a point of saying that the dual band feature would facilitate this connectivity which left me with the impression (obviously wrong) that the WiFi features of the time capsule could be used to communicate with multiple Macs regardless of their own networking configurations. (I have been configuring fairly complicated networks for 20 years and only bought my first Mac two and a half years ago; the second Mac is only six months old; the third will be bought next month.)
This isn't the end of the world for me... it does require reconfiguring my network and doing a lot of port tunneling for the box outside of the firewall in order to bring it inside as well as giving up some remote access redundancies (which were based on the ability to connect to both machines using VNC software which is port specific which means that it needed separate WAN side IP addresses).
Overall I love the Mac approach compared to the nightmare that was (is) Windows (although I do also run an Ubuntu Linux box just to keep me honest). That said, your sales reps do your products a HUGE disservice when they give glib and incorrect answer to what was, I believe in my case, a very specific and precise question.
Bill Wood
Watertown, Mass.

OSX 7 Photoshop 4, migration problems with 150:30 error

Luckily my recently deceased MacBookPro (2008) was fully backed-up on "TimeMachine". Good move!
Yesterday I purchased a new machine, with OSX 7 pre-installed, and used "Migration Assistant" to transfer my "Time Machine" saved data to this new machine. Worked great! Fair move!
Unfortunately there is just one glich.
Glitch: Error 150:30 All previous moves negated!
My reasearch indicates that there may be a problem caused by not de-authorizing PS4 on my suddenly-dead machine. (What part of dead do I need to explain?) Result : Dead end.
Now I went searching for some "Flex..." file in the startup disk's hidden Library. Unfortunately, it did not show up during my search.
I found an Adobe page that had promised to help me but the promised support was non-existent, in the end.
Should I attempt to re-download the software—PS4—from the Adobe site using the link in my original Adobe "receipt of purchase" confirmation? (Location: my online account information with Adobe.)
Where should I go from here? What should I do from this point in my search for a solution? What futher information should I be supplying to this forum that would help in formulating a successful solution to my problem?

Mylenium
Thank you for your assistance with this matter.
I am assuming that once I have run this Suite Cleaner Tool, I should sign back into my account, on the Adobe site, and pull up my sales receipt for the original "PS4 upgrade purchase" and re-download PS4—from Adobe— and install the whole programme again. Then, after I go through the procedure of re-registering it with Adobe, on my new machine, it should be fully functional. Hopefully, problem solved!
Please correct me if any part of my assumption is wrong.
Thanks again for your help.
Cheers,
Ralph

Getting Ready for Migration - Problem with BT ID

Hi,
I have read several e-mails from a recent thread on the forum which suggest that Migration of BT Yahoo e-mail accounts to the BT Mail service might resume sometime soon, and may even be completed by the end of April. Whether that will be so or not I guess we will have to wait and see. However, just in case, and for my account to be as ready as it can be, I need clarification of a particular potential problem.
I used to have two phone lines, let us say Line 1 and line 2. Now I only have one 'active' line (Line 1). Line 2 was cancelled a long time ago and my Broadband transferred to Line 1.
The above two lines had two seperate BT ID's (e-mail addresses). One being my Primary e-mail address which is one that ends @btinternet.com, but this remains the BT ID attached to Line 2 (the cancelled line).
The second BT ID, for Line 1, now my only line, has a User Name (e-mail address) which ends @gmail.com. The use of this e-mail address as the User Name was configured by a person on the BT Support Desk several years ago, when trying to resolve an issue at the time.
This morning I tried to change the User Name (e-mail address) on my BT ID for Line 1, so that it has the correct Primary e-mail address (ending @btinternet.com), I was unable to do so as the system said that this e-mail was already in use on another account (see above re cancelled line 2).
I can presently see no way that I can remove/delete/edit the account that covers the old cancelled line, so that it 'frees up' the use of my Primary e-mail address (@btinternet.com), enabling me to use it as the BT ID on my only remaining line (Line 1).
Is there a way I can cancel/delete/remove the now unused account? If not, is there a way for me to edit my Profile on Line 1, so that I can use my correct Primary e-mail as the ID, in preparation for the migration?
I apologise if this sound messy, but I want my account to be as 'clean' as possible, so that there are no potential problems when it finally comes to migration taking place.
Any help or advice would be much appreciated.
Regards,
Alan

Hi,
First of all, thanks to whiskywheels for the well-intended suggestion. I appreciated the thought, but in my experience there is not a chance that just a phone call to BT Support whould have solved the problem. It was BT Phone Support that in part are responsible for creating the problem I now find myself with.
However, the reason for my coming back on this is to say that I had a phone call this afternoon from a MOD who I am absolutely certain was trying to be honest and helpful. The upshot of what she said is that no useful purpose would be served by changing my BT ID, as I only have one BT ID, not two as I intimated in my first e-mail in this thread (see message 1 of this thread for an explanation).
I do have two accounts (one live - with the only phone line I have) and (one dead and now unused, although I can still access its information in MyBT).
Following the MOD's advice, having nothing to this effect in writing, I will try not to quote her exactly (I don't want to fall foul of breaking any BT rules etc), but my understanding was that my Primary e-mail address, and several sub-accounts are all 'linked' to one BT ID she said I have, the one that ends [email protected] .
My reason for raising this in the first place was to be as prepared as I can be for Migration to BT Mail when it finally comes along.
I have however to admit to now being really confused. Maybe it is the case that I have confused what is an ID, and the use of e-mail addresses as an ID. What I mean by that is as follows:
Using the e-mail tab on the BT.Com homepage the login asks for BT ID or Email Address, and then a Password. If I then use the one BT ID I am told that I have, then subseqently add the current e-mail password, I get a message which says "We don't recognise your details. Please check you've entered your full email address and password correctly and try again."
When I try inputting my primary e-mail address (instead of the BT ID), and then the e-mail password as before (which did work ok this afternnon, but now will not) I currently get the predictable request to change my password. It's a nightmare to say the least, and fills me with no confidence whatsoever for when that fateful day of Migration finally arrives.
If the login that comes up after pressing the e-mail tab asks for a BT ID, why will that not work, if as the MOD says I only have one BT ID not the two that I had thought. I could go on, but I am sure you get the point, confusion reigns!
I would have much preferred that my BT ID was the same as my primary e-mail address, but the MOD in question said 'to the effect' that it was not necessary.
Any thoughts or advice??
Regards,
AlanF

6i - 10G migration problem with sdo_geometry.srid

Similar Messages

Maybe you are looking for