Weblogic 11g on windows server 2008 - run WLST

how to configure weblogic 11g on windows server 2008 to run a simple WLST script
I managed to get so far on Windows to run a WLST script. Most examples are in Unix
I am in Dos, and ran our set environment variables.
Run java weblogic.WLST
To use WLST in interactive mode:java weblogic.WLST
I get as far as wls:/offline> connect('weblogic','weblogic','localhost:7001')
This works,
So now I am trying to figure out how to display the server state of the server, most examples are for unix.
Would any one have one that shows the server state, number of connections, and the number of active threads or stuck.
Just a a pointer would help me.
Cheers

You can refer this
http://weblogic-wonders.com/weblogic/2010/11/13/wlst-script-to-monitor-throughput-and-heapsize-of-weblogic-server/

Similar Messages

Installing Weblogic 12c on windows server 2008

Trouble installing Weblogic 12 on windows server 2008 ,i have oracle 11g databse in the same system.Now i am trying to install Oracle Weblogic 12 ,but WLS requires JDK 1.6 as a minimum ,after i install the Oracle11g database it automatically installed the Jdk 1.5 ..now how can i go about and install Weblogic 12 .

install JDK 6 or 7. Load the environment variables from CMD.EXE
set JAVA_HOME = RUTA_DEL_JDK_6_OR_7
set PATH =%JAVA_HOME%\BIN;% PATH%
Then, from the same terminal (cmd.exe) run the weblogic runInstaller.exe 12c.

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Upgrade to 11g on Windows Server 2008

Hi
I'm planning an upgrade of a 9.2.0.8 32-bit database to 11g 64-bit. The database is around 250GB in size, and is hosted on a Windows 2003 server. The plan is to host the upgraded database on a new Windows 2008 64-bit server. I have a maximum two-hour outage window
My initial thoughts for the upgrade procedure were as follows:
1) Install 9i 32-bit and 11g 64-bit on the new 2008 server
2) A day or two before the upgrade, clone the 9i database to the new 2008 server and open the database in recovery mode
3) Rollforward the clone database by applying archive logs from the source until the start of the outage window
4) Shutdown the old database, copy the last logs to the new server, apply them to the clone database, and run the upgrade procedure.
Then I realised that 9.2.0.8 won't install on Windows Server 2008 as it's not certified.
Does anyone have any suggestions regarding the best way I could do this?

250GB is not all current data and hopefully is partitioned. Approach this from the standpoint of moving 90+% before the outage. Tell us more about the organization and tablespaces.
Amazon.com has got the upgrade in place optimized to only to 16 minutes per database. I can't tell you the details but I can tell you that much of what Oracle does in its upgrade scripts can be done prior to the outage. And some of it after the database is opened again. See if you can slice and dice the upgrade script to minimize downtime too.

UCM 11g on Windows Server 2008 - AD Integration

We've been in the process of upgrading from 10gR3 to 11g, and we are also upgrading our server infrastructure from Windows Server 2003 to Windows Server 2008. In our 10g environment, we take advantage of the AD integration so that when users navigate to our Intranet, they are NOT challenged to log in. UCM simply uses their AD credentials. Same with when they are working with the DIS through Windows Explorer - no need to log in.
Very long story short - we cannot get this functionality working in 11g on Server 2008, even with Oracles help. The automatic AD integration in 11g needs to occur at the Weblogic level. As I understand it, for it to work, Windows must send an encrypted Kerberos ticket to WLS. WLS then has to decrypt it and then accept it. The problem is that Windows wants to send it encrypted in RC4-HMAC but WLS wants to decrypt it in DES. Hence, WLS cannot decrypt the ticket.
We have heard of people getting WLS to work with RC4, but Oracle have said that this is not supported. The alternative is to get Windows to send it in DES, but our NEtwork guys are not keen on this as they say it is a step down. It's also very complicated and a big impact to our domain. Oracle have said that AES will eventually be supported, but there is no timeframe for it.
Has anyone had any experience with this issue? I am interested in peoples thoughts and experiences in this area.

Hi,
I heard from an Oracle employee that RC4 is not supported by Oracle.
We did make tests with AD on Windows2003 and AD on Windows2008 with RC4 and DES encryption and it is working in both cases. Our weblogic server is installed on Windows2008R2 in both cases.
-Making it work on Windows2008
--Requires to use ktpass instead of using setspn and ktab
-Making it work on Windows2003
--Requires to use ktpass instead of using setspn and ktab
--Requires to set the DefaultEncryptionType to 1, if DES encryption should be used.
Both solutions require a lot of time for first time installation :-)
Greetings
Tobi

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

Oracle XE 11g and Windows Server 2008 - 64 bits

Hello,
my questions are :
- is Oracle XE working on 64 bits (windows)
- if it doesn't :
- is an update coming ?
- is there any solution to make Oracle XE running with Win2008 Server 64 bits (i tried, but i had many problems with execution of listener)
Thx for your informations.

Hello, and welcome to the OTN forums!
You could have used the search forum to find answers to these frequently asked questions...
However, I give you a short intro:
- is Oracle XE working on 64 bits (windows)There is no general answer to that question. As you've found out, there is no installer for 64bit Windows. As for 32bit, there are several Windows versions that are listed in the [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]System Requirements section of the XE Installation Guide, and a few you won't find there, e.g. Vista or Home Editions. This means you'll probably experience problems when trying to install on any OS version not listed there. Some of them might be worked around, others may not.
Since your target is Windows Server 2008 (edition?), you might get a more precise answer when you search for that.
- is an update coming ?See {thread:id=2277728} .
In addition to that, {thread:id=2278170} contains an overview for the state of all operating systems.
- is there any solution to make Oracle XE running with Win2008 Server 64 bits (i tried, but i had many problems with execution of listener)The safest way would be to use a VM with a supported operating system.
-Udo

Systems Requirements - Weblogic 11g on Windows Server 2012

Hi,
We are migrating the Delivery Environment from RedHat to Windows 2012 Server. We use Weblogic 11g and I need some help to know about the system requirements for a Windows Server 2012 platform running Weblogic 11g, could you tell me the equivalent Windows platform (CPU/RAM) of a Linux RedHat with that system features:
RAM: 24GB
CPU: 2 MACHINES X 2 CORE
Weblogic 11g system requirements will be higher in Windows Server 2012 than in RedHat if we want to keep up a good performance?
Thanks!

Only 10.3.6 using jdk 1.7u15+is certified on Windows 2012.
System Requirements and Supported Platforms for Oracle Fusion Middleware 11gR1 ( xls)
The system requirements are here:
Fusion Middleware System Requirements and Specifications
There is no benchmark information so I really cannot comment on performance.

Can't connect Forms 6i to Oracle 11g on Windows Server 2008 SE

Hi everyone,
I have Oracle 10g working pretty well with Forms 6i, but now I have installed Oracle 11g on another server and I'm trying to connect Forms 6i to my other Oracle 11g server, but Forms 6i never gets connected. Is there any trick to make it work? I have check the upper cases and other things related with lower and upper case passwords, but nothinh happens.
Can anyone please help me?

Hello;
Its probably the Oracle client that installs with Forms 6. Try connecting to the database using SQL Plus from a Forms workstation. If it fails I would install a newer client and switch the Oracle Home on all the workstations.
( Provided it tests out )
I would probably try using the Net Configurations Assistant in your Oracle Start Menu group with all combinations I could think of before I added a second client to the mix.
Of minor interest :
http://www.dbaportal.eu/?q=node/167
The Windows version might put the hurt on you. This may or may not help that :
http://www.araboug.org/ib/index.php?showtopic=49679
Tough combination.
Best Regards
mseberg
Edited by: mseberg on Jun 20, 2012 3:51 PM
Later
Legacy Applications and Oracle 11g
http://jarneil.wordpress.com/2008/03/26/legacy-applications-and-oracle-11g/
So I'm sorry to say you are out of options. I also checked the Forms Forum and the few posts there on Forms 6 ( Obsolete in 2004 ) all agree. Forms 6 and Oracle 11 database do not play together.
I hope at least I saved you some time.
mseberg
Edited by: mseberg on Jun 20, 2012 4:36 PM
Upgrading Oracle Forms 6i to Oracle Forms 11g
http://docs.oracle.com/cd/E17904_01/doc.1111/e10394.pdf

Installing Forms 11g 64bit on Windows Server 2008 64bit

Hi,
we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
- installed JDK 64bit
- installed WLS1032-generic
- started installation of Forms/Reports
Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
Info in Log-File :
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der Domain.
Cause:
Zeitüberschreitung beim Starten von Admin_Server.
Action:
Weitere Informationen finden Sie in den Logs.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
[2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
================================================
Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
Any idea or help is appreciated.
Thanks,
Mark

FYI,
This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
=================================
1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
2) Roll back the change so the System Path contains again the directory path with parenthesis
3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
==================================
Thanks for your replies,
Mark

ORACLE_HOME in Oracle RAC 11g (Windows Server 2008)

Hello,
I've got two (2) nodes in an Oracle RAC 11g in Windows Server 2008. Oracle software is installed in C:\app.
I realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1
- Do you have to setup the same in both nodes?
Thanks

I realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.its normal behaviour
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1if you installed that location, yes
- Do you have to setup the same in both nodes?actually, you dont HAVE TO, its not needed at all

Oracle 11g Client for Windows Server 2008 Relase2 Operating Stystem

Hi,
I am having a server with Operating System as Windows Server 2008 R2 version 64 - bit.
I am using SSRS 2008 which is 64 bit, for retreiving the data from Oracle (which is 11g - 32 bit), I am unable to create data source for Oracle.
I had installed ODAC Components of Oracle 11.1.0.7.20 on the server, but still I am getting the following error:
"The 'OraOLEDB.Oracle.1' provider is not registered on the local machine."
Does any one know how to install Oracle Client 11g on Windows Server 2008 R2 Operating system?

Helios,
It is wonderful that you are polite and encouraging to new people.
While you are responding, could you explicitly direct people to use the correct forum. This has at least 2 benefits:
1) Ensures that the person gets the widest possible amount of assistance;
2) Ensures that the rest of us do not need to waste time on improperly placed questions.
I suggest 'explicitly' since some people do not get the hint, and keep returning to the original thread.
This thread belongs in 'Database - General' or 'Database - Install'.

Setup 2-Node RAC 11.2.0.1.0 on Windows Server 2008

I have been setting up RAC environments in VirtualBox and VMWare in my local machine and in our test server. I have done the following setup:
1. RAC 10g on RHEL 5.4 (VMWare / VBox)
2. RAC 11g on RHEL 5.4 (VBox)
3. RAC 11g on Windows Server 2008 (VBox)
Now, our management wants me to setup a 2-node RAC in real world. Cost is not an issue here as this will be financed by a big private group.
I am excited to do the project as I am really enthusiastic in database clustering. Of course, there is a little nervous feeling since this is
my first time doing it in real world (as the best RAC expert started from his first deployment :) ).
I am going to build RAC 11.2.0.1.0 in Windows Server 2008
I would like to seek advise on:
- the best practices, what are the things that I have to consider?
- any straight forward real world deployment guide or technical papers that can serve as my reference
- any issues that I might encounter
- any help and feedback
I know I can be successful in this first time project if ill seek advise to the experts.
I hope you can help me and I will be glad to read and review your contributions.
Thanks a lot.....

Hi,
Few months ago I had a project to setup RAC on Windows 2008 R2. For six months now there are no problems and it's working fine, but I have to say that installation wasn't easy and took me a lot of time. Another thing is the troubleshooting, I feel completely helpless when (if) something screws up. It takes between 10 to 15 mins to have database running in case of reboot of the servers.
So here are few things to consider:
- Disable write cache on shared disks.
- Disable User Access Control!
- Disable firewall (really important)!
- Use diskpart command to create extended and logical partition on all disks.
- There is also nasty bug we hit, I've blogged about it:
http://sve.to/2011/09/29/exhaust-of-windows-2008-heap-memory-with-oracle-database-11-2-0-2/
- I had a terrible problems with user equivalence. Verify Privileges for copying files in the cluster:
net use \\nodeX\c$
- Once installation is completed apply latest Bundle Patch - currently this is BP6 (Patch 13965211):
DB 11.2.0.3 Patch 6 includes all bugs fixed in 11.2.0.3 Patch 1 to Patch 5 and also includes CPU2012. It must be applied on top of the 11.2.0.3.
Useful MOS notes:
RAC and Oracle Clusterware Best Practices and Starter Kit (Windows) [ID 811271.1]
Windows: CLUVFY Fails with TCP Check PRVF-7617 Due to Case of Node Names [ID 1286394.1]
Finally if you have a choice then go with Linux, it's robust, easy to install and maintain. You have better control on the system and user processes, it's more flexible and easy to troubleshoot.
Regards,
Sve

Weblogic 11g on windows server 2008 - run WLST

Similar Messages

Maybe you are looking for