Weblogic 6.1 Service Pack 3 installation

I am upgrading weblogic 6.1 service pack 2 to service pack 3. Everything goes fine, except that after the installation the weblogic server says the license is expired. If i uninstall the service pack 3 it works fine. Since i have inherited this application, I am not sure where the license file is. I found a weblogiclicense.xml file in the web-inf directory. Can i use this somehow. Any help would be greately appreciated.
thanks,
-faisal

Try saving the license.bea file somewhere, install the SP, see if a different
license.bea is there and replace as necessary.
Why stop at SP3? Why not go up to SP5?
Wayne Scott
Faisal wrote:
> I am upgrading weblogic 6.1 service pack 2 to service pack 3. Everything goes fine,
> except that after the installation the weblogic server says the license is expired.
> If i uninstall the service pack 3 it works fine. Since i have inherited this
> application, I am not sure where the license file is. I found a weblogiclicense.xml
> file in the web-inf directory. Can i use this somehow. Any help would be greately
> appreciated.
>
> thanks,
>
> -faisal

Similar Messages

  • WebLogic 6.1 Service Pack Giving Problem

    Hi!
    We have Weblogic 6.1 with Service Pack 2 installed and it was working fine since year.
    I have install SP 7, but it is not able to recognise EJB Beans than after.
    I uninstall the service pack, but then it is gicing following error related to config.sys file.
    How to solve this problem?
    Reg,
    Chetan
    ERROR :
    The WebLogic Server did not start up properly.
    Exception raised:
    weblogic.management.configuration.ConfigurationException: Unknown attribute StagedTargets
    for ejb-usermanagement, type Application
    at weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.parse
    MBeanAttributes(ConfigurationParser.java:308)
    at weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.start
    Element(ConfigurationParser.java:188)
    at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1340)
    at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValid
    ator.java:1183)
    at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScan
    ner.java:1876)
    at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(
    XMLDocumentScanner.java:1252)
    at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanne
    r.java:381)
    at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:967)
    at weblogic.management.internal.xml.ConfigurationParser.parse(ConfigurationParser.
    java:105)
    at weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileRepository
    .java:261)
    at weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileRepository
    .java:223)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.ja
    va:636)
    at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanIm
    pl.java:359)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy1.loadDomain(Unknown Source)
    at weblogic.management.AdminServer.configureFromRepository(AdminServer.java:188)
    at weblogic.management.AdminServer.configure(AdminServer.java:173)
    at weblogic.management.Admin.initialize(Admin.java:239)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    ***************************************************************************

    Try saving the license.bea file somewhere, install the SP, see if a different
    license.bea is there and replace as necessary.
    Why stop at SP3? Why not go up to SP5?
    Wayne Scott
    Faisal wrote:
    > I am upgrading weblogic 6.1 service pack 2 to service pack 3. Everything goes fine,
    > except that after the installation the weblogic server says the license is expired.
    > If i uninstall the service pack 3 it works fine. Since i have inherited this
    > application, I am not sure where the license file is. I found a weblogiclicense.xml
    > file in the web-inf directory. Can i use this somehow. Any help would be greately
    > appreciated.
    >
    > thanks,
    >
    > -faisal

  • Do i need any patches for weblogic 6.1 (service pack 2 or 3)  and sybase Jconnect5.5 ?

    Hi
    I am going use weblogic 6.1 (service pack 2 or 3) with Sybase Jconnect 5.5
    . database is Sybase 12.0.0.4 or 12.5. Will i need any patches for this combination
    to work? Please let me know.
    thanks

    Deepak
    Thanks. your link was not helpful. It does not mention any patches required.
    "Deepak Vohra" <[email protected]> wrote:
    >
    Sybase jConnect Driver
    http://e-docs.bea.com/wls/docs61/jdbc/intro.html#intro016
    "Madhavi" <[email protected]> wrote:
    Hi
    I am going use weblogic 6.1 (service pack 2 or 3) with Sybase Jconnect
    5.5
    . database is Sybase 12.0.0.4 or 12.5. Will i need any patches forthis
    combination
    to work? Please let me know.
    thanks

  • JSP PRECOMPILER IS NOT WORKING WITH WEBLOGIC 6.1 SERVICE PACK 5

              When i compile JSPs using JSP PreCompiler in weblogic 6.1
              ( Service Pack 4 ) , compilation is perfect.
              But when i precompile the same JSPs with weblogic 6.1 (Service Pack 5 )
              , i get compilation error.
              Variable Not Found error comes in service pack 5. But the same code works
              well with service pack 4.
              Could anyone help me ?
              [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
              NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve symbol
              [java] symbol : variable yesLinkPageText
              [java] location: class jsp_servlet._secure.__confirmation
              [java] htmllink0.setPage(yesLinkPageText); //[ /secure/co
              rmation.jsp; Line: 32]
              [java] ^
              [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
              NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve symbol
              [java] symbol : variable noLinkPageText
              [java] location: class jsp_servlet._secure.__confirmation
              [java] htmllink0.setPage(noLinkPageText); //[ /secure/con
              mation.jsp; Line: 37]
              [java] Error: compilation of jsp file /secure/confirmation.jsp (java file C
              VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classes
              p_servlet\_secure\__confirmation.java failed):
              [java] ^
              [java] null
              [java] 2 errors
              [java] Error: [jspc]: 1 file(s) failed:
              [java] /secure/confirmation.jsp
              [java] java.io.IOException: Compiler failed executable.exec(java.lang.String
              

    Can you post the jsp page or a example which doesnt compile in sp5. It seems
              difficult to guage what the problem could be from looking at the error.
              --Nagesh
              "george vargeese" <[email protected]> wrote in message
              news:40c56502$1@mktnews1...
              >
              > When i compile JSPs using JSP PreCompiler in weblogic 6.1
              > ( Service Pack 4 ) , compilation is perfect.
              >
              > But when i precompile the same JSPs with weblogic 6.1 (Service Pack
              5 )
              > , i get compilation error.
              >
              > Variable Not Found error comes in service pack 5. But the same code
              works
              > well with service pack 4.
              >
              > Could anyone help me ?
              >
              >
              > [java]
              C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
              > NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve
              symbol
              >
              > [java] symbol : variable yesLinkPageText
              > [java] location: class jsp_servlet._secure.__confirmation
              > [java] htmllink0.setPage(yesLinkPageText); //[
              /secure/co
              > rmation.jsp; Line: 32]
              > [java] ^
              > [java]
              C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
              > NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve
              symbol
              >
              > [java] symbol : variable noLinkPageText
              > [java] location: class jsp_servlet._secure.__confirmation
              > [java] htmllink0.setPage(noLinkPageText); //[
              /secure/con
              > mation.jsp; Line: 37]
              > [java] Error: compilation of jsp file /secure/confirmation.jsp (java
              file C
              >
              VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classe
              s
              > p_servlet\_secure\__confirmation.java failed):
              > [java] ^
              > [java] null
              > [java] 2 errors
              > [java] Error: [jspc]: 1 file(s) failed:
              > [java] /secure/confirmation.jsp
              > [java] java.io.IOException: Compiler failed
              executable.exec(java.lang.String
              >
              >
              

  • Weblogic 5.1 Service Pack 9 Issue

    Hi, I install weblogic5.1 with service pack 9 on Solaris. However, when I start the weblogic server, the following appears during startup even though the server is started successfully:-[ExternalEntity] : Could not resolve entity '-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN'. Check your dtd reference.Can anyone tell me what is wrong?

    You must be registered at WebSupport to download service packs
    Regards from Mexico
    Sergio Ríos
    [email protected] (Jean-Michel Gautreau) wrote:
    Hi folks!
    Where can I download Weblogic 5.1 Service Pack 9 Issue, I can't see
    any link to download it on BEA's website. There is only a link to
    download BEA WebLogic 5.1 WITH SP9... I just need the SP9!!!
    Thanks for your help.

  • Symbian Anna Service Pack installation cancelled i...

    How can I check if I have the service pack installed correctly?
    In Applications - SW Update - Options - View Update History I see:
    Symbian Anna service pack - Installation cancelled
    In Settings - Phone - Phone management - Device Updates I have:
    Release: Symbian Anna
    Software version: 022.014
    In App Manager - Installed applications - Logs the last entries are:
    Metadata System Upgrade - Installed
    Java Runtime Update (2.0) - Installed
    Conversation Server 1.58 - Installed
    messaging 1.59(0) - Installed
    Am I missing any components? Do you all have service pack cancelled? Is there any way to reinstall service pack? Cannot see it in updates or in Nokia Suite.
    Thanks.

    when you click on the "software update" icon, after the check don't you see the option to reinstall?
    Greece Nokia X6 RM-559 v40.0.002
    Attachments:
    Capture.PNG ‏33 KB

  • Downloading Weblogic 5.1 Service Pack 9 Issue

    Hi folks!
    Where can I download Weblogic 5.1 Service Pack 9 Issue, I can't see
    any link to download it on BEA's website. There is only a link to
    download BEA WebLogic 5.1 WITH SP9... I just need the SP9!!!
    Thanks for your help.

    You must be registered at WebSupport to download service packs
    Regards from Mexico
    Sergio Ríos
    [email protected] (Jean-Michel Gautreau) wrote:
    Hi folks!
    Where can I download Weblogic 5.1 Service Pack 9 Issue, I can't see
    any link to download it on BEA's website. There is only a link to
    download BEA WebLogic 5.1 WITH SP9... I just need the SP9!!!
    Thanks for your help.

  • SQL service pack installation

    Installing SQL 2005 through SQL4SAP.VBS will install its available service pack 2 automatically (or) Do we need to install manually.
      Can we install the service pack 2 manually even after SAP Installtion .If so,please give the procedure.
    Thanks

    Hi,
    Installing SQL 2005 through SQL4SAP.VBS will install its available service pack 2 automatically (or) Do we need to install manually.
    It will automatically install in the process of SQL server installation.
    Later you can even install SP3 which is available on Microsoft website.
    Regards
    Rajesh Narkhede

  • Need SQL Server service packs installation procedure

    Hey Guys,
    I am in the process of installing service packs to my SQL Server 2008 and R2 editions, I was searching for the installation procedure in technet for this but nothing was provided for this, I tried to read the
    "readme" and setup documentation provided in the SP 4 download page but its useless since its redirecting again to some other page which again points to same download page, It makes me wonder if there are any procedures provided by Microsoft for
    this. Let me know if anyone has it. I don't want to follow any third party websites/ individual bloggers providing best practices/installation procedures. 
    My Environment: SQL SERVER 2008/ R2  (STANDARD)  and these are standalone
    machines.
    OS: Windows server 2008 R2 STANDARD
    With regards,
    Gopinath.
    With regards, Gopinath.

    Copy the patch files to the server
    Run the patch file and follow the on-screen instructions
    Select the instances that you wish to patch
    Allow the patch to finish
    Reboot if a reboot is required (the patch will tell you if there were any locked files)
    For more info refer this link
    Please Mark this as Answer if it solved your issue 
    Please vote this as Helpful information if it helps to solve your issue

  • MSCS SQL Server Service Pack Installation

    Dear All,
    We are using Microsoft Cluster and i completed Microsoft SQL Server 2005 Installation on Cluster.
    Now when i am trying to Install Service Pack 2 of SQL Server i can't get success when both node are running.
    But when i swhiched off Node 2 and did installation on Node 1 i get success.
    But after finishing Installation on Service Pack 2 i can't get that service pack on Node 2.
    Here i want to confirm that i have to do installation of Service Pack 2 on both node ?
    Regards,
    Nikunj Thaker.

    Hi,
    Have you run the SQL 2K5 SP2 upgrade on the other node. What happens is that you upgrade the SQL Server binaries on the Clustered instances but not the local files.
    If you run SP2 on the "Passive" node it will upgrade server compoments that are not cluster aware (like SSIS). I normally upgrade the Client Components first on the passive node, reboot and then upgrade all components on the active node afterwards.
    On a standalone machine - all components are upgraded at the same time - both per instance and the server components so you won't have that issue.
    --Kishore

  • Does Service Pack installation modify the repository db ?

    Hello,
    Does anybody know if installation of Service Packs on a old XI R2 platform modify in some way the repository database ?
    The purpose of this question is this :
    My production platform is XI R2 SP1, and I would like to upgrade to SP4 without any risk for my users.
    To do that, I wonder if building a new platform with SP4, testing, and then shutting down the old CMS and linknig the new CMS to the production repository would work.
    It should be the case if SP doesn't need new structure or data on the repository database...
    Can anybody confirm that this works ?
    Thanks in advance

    Hi Francois,
    I presume you're on some flavor of Windows. If that's the case, do the following to copy the CMS db (once your new system is up and working):
    1. Stop the CMS from the CCM.
    2. Right-click on the CMS --> Properties.
    3. Switch to the configuration tab.
    4. In the CMS Data Source section, click on Specify.
    5. Select Copy data from another Data Source.
    This will copy data from your Production data source to your new environment.
    As for the FRS, you do not need to copy the FRS folders. Once your CMS db is copied, you only need to point the I/O FRS of your new (SP4) environment to the FRS locations of your old(SP1) environment.
    Please do ensure that everything is backed up though (i.e. FRS folder structure and CMS db).
    Also, if Auditing is enabled on your SP1 deployment, it would be best to turn off auditing before stopping the CMS, copying the CMS db.
    Best,
    Srinivas

  • Regarding Service Pack installation

    Hi Guys,
    Excuse my ignorance on the subject but could any of you tell me if the installation of a service pack is client dependent?
    Let's say that I have a DEV, a QAS and a PRD clients.... can I install a service pack in DEV first and then move the changes to the following systems?
    Many thanks,
    Brodo

    Hi,
    When SPs are applied in one instance or system, It is available in all clients of that instance.
    SPs have to be applied in all the systems in the landscape.
    Hope this helps you.
    regards,
    Kevin Hill

  • Service Pack Installation

    Hi guys,
    I know this answer, but I can't remember it.
    Are SPs incremental, or comprehensive?  I have to take a GRC product from a lower service pack to the latest, and there are about 4 packs in between.  I forgot whether I need to do each one, or just the final one.
    Sorry - I should know this.  Also, does anyone have a slide deck (from Frank Rambo, perhaps) on 5.2 service packs?
    Thanks,
    Santosh

    Santosh,
    SP for JAVA: You can go to the latest one (cumulative)
    SP for ABAP: You have to install them sequentially (incremental).
    Relevant SAP Notes:
    SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
    SAP Note 1352498 - Support Pack Numbering - GRC Access Control
    Hope it help. Best regards,
       Imanol

  • Service Pack Installation problem.

    I'm having problem installing service pack on my system, I tried SP3,5,6
    they all have the same problem.
    I must have done something wrong. If I remove the service pack from my
    classpath then I can start it up fine.
    I followed the procedure from the manual. I'm using JDK 1.3 and have tried
    JDK 1.2.2_005 as well.
    Here are the error messages:
    =================================
    Tue Oct 03 16:44:45 CDT 2000:<I> <RMI> Registry started
    Tue Oct 03 16:44:45 CDT 2000:<I> <EJB> 0 EJB jar files loaded, containing 0
    EJBs
    Tue Oct 03 16:44:45 CDT 2000:<I> <EJB> 0 deployed, 0 failed to deploy.
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.reflect.InvocationTargetException
    java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:141)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
    iveReloadOnModifyClassLoader.java
    :53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
    init>(RecursiveReloadOnModifyClas
    sLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
    pl.java:1421)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
    519)
    at
    weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:492)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1305)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    java.lang.NoSuchMethodError
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:141)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
    iveReloadOnModifyClassLoader.java
    :53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
    init>(RecursiveReloadOnModifyClas
    sLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
    pl.java:1421)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
    519)
    at
    weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:492)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1305)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    =================================
    Help. Thanks,
    Benjamin

    I reinstalled WL 5.1 Server and applied the SP6. It works now.
    Thanks,
    Benjamin
    =======================================
    "Benjamin Chi" <[email protected]> wrote in message
    news:[email protected]...
    I'm having problem installing service pack on my system, I tried SP3,5,6
    they all have the same problem.
    I must have done something wrong. If I remove the service pack from my
    classpath then I can start it up fine.
    I followed the procedure from the manual. I'm using JDK 1.3 and have tried
    JDK 1.2.2_005 as well.
    Here are the error messages:
    =================================
    Tue Oct 03 16:44:45 CDT 2000:<I> <RMI> Registry started
    Tue Oct 03 16:44:45 CDT 2000:<I> <EJB> 0 EJB jar files loaded, containing0
    EJBs
    Tue Oct 03 16:44:45 CDT 2000:<I> <EJB> 0 deployed, 0 failed to deploy.
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.reflect.InvocationTargetException
    java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:141)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
    iveReloadOnModifyClassLoader.java
    :53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
    init>(RecursiveReloadOnModifyClas
    sLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
    pl.java:1421)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
    519)
    at
    weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:492)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1305)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    java.lang.NoSuchMethodError
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:141)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
    iveReloadOnModifyClassLoader.java
    :53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
    init>(RecursiveReloadOnModifyClas
    sLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
    pl.java:1421)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
    519)
    at
    weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:492)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1305)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    =================================
    Help. Thanks,
    Benjamin

  • No data return after Service Pack installation

    Post Author: Tati
    CA Forum: Publishing
    Hello all.
    I am using Crystal Server XI (BOE11) with Service Pack one. I had a report with a FULL OUTER JOIN that returned data before the installation of the service pack. Now it doesn't return any data. Can someone please help?
    Thanks in advance.

    Post Author: Tati
    CA Forum: Publishing
    Hello all.
    I am using Crystal Server XI (BOE11) with Service Pack one. I had a report with a FULL OUTER JOIN that returned data before the installation of the service pack. Now it doesn't return any data. Can someone please help?
    Thanks in advance.

Maybe you are looking for

  • Dunning letter through email

    Hi, I want to send dunning letter ( Tcode F150) through email.As per SAP note 328124, I copied OPEN_FI_PERFORM_00001040_P into z FM. Also add new entry for 00001040 event in FIBF tcode.But still when Iam running the Tcode F150, it shows print preview

  • How do I create a group calendar?

    Hi All, It is still unclear to me on a fresh 10.6 install how to create a group calendar (using only the Apple server administration utilities) such that all members of a given OpenLDAP group can also subscribe to and share the same calendar if they

  • HP Officejet 5610 all in one "Door Open" error msg

    HP Officejet 5610 all in one printer: "Door Open" error msg when door is closed.    Can't print.

  • Partition with Disk Utility in 10.7, Lost All Data on Drive

    All, I partitioned a 2TB drive with DiskUtility.  Partition 1: 1.99TB, Paritition 2: 1GB.  Lost all data Partition 1.  Two years of family photos, videos, business communications and files, time machine backups, are gone.  What to do? The solution I

  • Computer Not Visible to Outside World

    How do I retain my computer's unique IP address following the addition of an AirPort Extreme base station? WIRED SETUP: Telephone line --> DSL modem --> AirPort Extreme --> Ethernet port on back of G5 My computer has always had a unique IP address. T