Weblogic 8.1 with GLUE and Cactus
I have cactus set-up. It starts the server and when it hits weblogic via the web
application I get the following error.
Service errors occurred: com.bitfone.server.commons.services.ServiceException:
Bind failed for http://localhost:7001/testapp/services/user.wsdl com.bitfone.server.commons.remote.IUserServices
[electric.registry.RegistryException: could not bind to path: http://localhost:7001/prism/services/user.wsdl]
If I start the server using the ant task I created and I put http://localhost:7001/testapp/services/user.wsdl
in to a web browser it works fine.
According to that link your right it is not supported.
Have you tried adding the xerces jars at the beginning of the classpath?
Similar Messages
-
Problem weblogic 9.2 with quartz and log4j : url-template-config.xml
Hello,
I configure a Servlet Quartz to run when WebLogic 9.2 starts, but i have an exception, here is my log :
2009-04-15 11:52:52,424 ERROR Logger.error(): Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:276)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:68)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:493)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1688)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1665)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1585)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2678)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:874)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:326)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:114)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:25)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
at weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: org.apache.xmlbeans.XmlException: error: The document is not a url-template-config: document element namespace mismatch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
at org.apache.xmlbeans.impl.store.Locale.verifyDocumentType(Locale.java:449)
at org.apache.xmlbeans.impl.store.Locale.autoTypeDocument(Locale.java:354)
at org.apache.xmlbeans.impl.store.Locale.parseToXmlObject(Locale.java:1270)
at org.apache.xmlbeans.impl.store.Locale.parseToXmlObject(Locale.java:1254)
at org.apache.xmlbeans.impl.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:345)
at org.apache.beehive.netui.core.urltemplates.schema.UrlTemplateConfigDocument$Factory.parse(Unknown Source)
at org.apache.beehive.netui.core.urltemplates.DefaultURLTemplateFileParser.parse(DefaultURLTemplateFileParser.java:34)
at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:118)
... 43 more
The problem may be a conflict with the different version. My versions are quartz-1.6.0.jar, log4j-1.2.15.jar.
When i rename the file url-template-config.xml i don't have this exception but just a log4j Warning but i don't know if it's not dangerous for my application (run with WebLogic 9.2) if i rename this file.
Can you give me a solution to remove this exception or tell me if rename this file it's not dangerous ?
Thank you,
MH.url-template-config.xml is part of Apache Beehive. This file is used to provide a template mechanism for URL's. Is your application using Apache Beehive purposefully?
http://beehive.apache.org/docs/1.0.2/netui/apidocs/javadoc/org/apache/beehive/netui/core/urls/URLRewriterService.html
If not, you may have inadvertently added a reference to Apache Beehive when you created the application and now there are references to the Apache Beehive shared libraries in either weblogic-applicaiton.xml or weblogic.xml -
Severe form POST error in Weblogic 6.1 with inputCharset and UTF-8
If you specify the following parameters in your web.xml (this is
required for support of non-ASCII charsets including UTF8)
<context-param><param-name>weblogic.httpd.inputCharset./*</param-name>
<param-value>UTF8</param-value></context-param>
form POSTs no longer work under WebLogic 6.1SP1. ie. we cannot forward
to a new page with any forms. We tried the following test files,
running test.jsp and entering data and looking at the weblogic console
for return data in test2.jsp but none appeared. Does anyone have an
idea what I am doing wrong?
Regards
Mel
Attached is test.jsp and test2.jsp....
test.jsp
<html><head><title>Posted Form Test</title></head><body>
<%
// dump out the request params to the console for debugging...
System.out.println("parameter dump from test.jsp");
System.out.println(" char encoding == " +
request.getCharacterEncoding());
Enumeration enum = request.getParameterNames();
while (enum.hasMoreElements()) {
String name = (String) enum.nextElement();
String value = request.getParameter(name);
System.out.println("param '" + name + "' == '" + value + "'");
// get the request param
String data = request.getParameter("data");
if (data == null || data.length() == 0) {
%>
<h4>No data submitted yet.</h4>
<% } else { %>
<h4>Request parameter received: <%=data%></h4>
<% } %>
<form action="test2.jsp" method="post">
Type in some data: <input type="text" name="data">
<input type="submit">
</form>
</body></html>
test2.jsp
<%-- simple JSP to get a request dispatcher and forward the request
--%>
<%@ page import="javax.servlet.*" %>
<%
// dump out the request params to the console for debugging...
System.out.println("parameter dump from test2.jsp");
System.out.println(" char encoding == " +
request.getCharacterEncoding());
Enumeration enum = request.getParameterNames();
while (enum.hasMoreElements()) {
String name = (String) enum.nextElement();
String value = request.getParameter(name);
System.out.println("param '" + name + "' == '" + value + "'");
// forward on to the test.jsp page
RequestDispatcher rd = request.getRequestDispatcher("test.jsp");
rd.forward(request, response);
%>
If you specify the following parameters in your web.xml (this is
required for support of non-ASCII charsets including UTF8)
<context-param><param-name>weblogic.httpd.inputCharset./*</param-name>
<param-value>UTF8</param-value></context-param>
form POSTs no longer work under WebLogic 6.1SP1. ie. we cannot forward
to a new page with any forms. We tried the following test files,
running test.jsp and entering data and looking at the weblogic console
for return data in test2.jsp but none appeared. Does anyone have an
idea what I am doing wrong?
Regards
Mel
Attached is test.jsp and test2.jsp....
test.jsp
<html><head><title>Posted Form Test</title></head><body>
<%
// dump out the request params to the console for debugging...
System.out.println("parameter dump from test.jsp");
System.out.println(" char encoding == " +
request.getCharacterEncoding());
Enumeration enum = request.getParameterNames();
while (enum.hasMoreElements()) {
String name = (String) enum.nextElement();
String value = request.getParameter(name);
System.out.println("param '" + name + "' == '" + value + "'");
// get the request param
String data = request.getParameter("data");
if (data == null || data.length() == 0) {
%>
<h4>No data submitted yet.</h4>
<% } else { %>
<h4>Request parameter received: <%=data%></h4>
<% } %>
<form action="test2.jsp" method="post">
Type in some data: <input type="text" name="data">
<input type="submit">
</form>
</body></html>
test2.jsp
<%-- simple JSP to get a request dispatcher and forward the request
--%>
<%@ page import="javax.servlet.*" %>
<%
// dump out the request params to the console for debugging...
System.out.println("parameter dump from test2.jsp");
System.out.println(" char encoding == " +
request.getCharacterEncoding());
Enumeration enum = request.getParameterNames();
while (enum.hasMoreElements()) {
String name = (String) enum.nextElement();
String value = request.getParameter(name);
System.out.println("param '" + name + "' == '" + value + "'");
// forward on to the test.jsp page
RequestDispatcher rd = request.getRequestDispatcher("test.jsp");
rd.forward(request, response);
%>
-
Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3
Hello,
I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
Please guide me to resolve the problem.
C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
Do you wish to run the CRS evaluation installation? [Y/N]: y
Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
The CRS evaluation install will attempt to create the database. Press [Return] t
o continue or any other key to quit:
Enter mysql database connection details
Enter user name: admin
Enter user password: admin
Enter database name: crsprod
Enter 'root' user password:
Creating database...
Finished database creation
Enter weblogic admin server URL: http://localhost:7001
Enter weblogic admin server username: weblogic
Enter weblogic admin server password: weblogic123
Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
all:
[copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
[delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
cim.tmp
BUILD SUCCESSFUL
Total time: 0 seconds
Application Server: weblogic
The following installed ATG components are being used to launch:
ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
Nucleus running
atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
(Searching for products... done.)
atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
atg.cim.productconfig.appserver.AppServerSelectTask starting...
atg.cim.productconfig.appserver.AppServerSelectTask finished.
atg.cim.productconfig.appserver.AppServerPathTask starting...
atg.cim.productconfig.appserver.AppServerPathTask finished.
atg.cim.productconfig.appserver.DomainPathTask starting...
atg.cim.productconfig.appserver.DomainPathTask finished.
atg.cim.productconfig.appserver.UrlTask starting...
atg.cim.productconfig.appserver.UrlTask finished.
atg.cim.productconfig.appserver.UsernameTask starting...
atg.cim.productconfig.appserver.UsernameTask finished.
atg.cim.productconfig.appserver.PasswordTask starting...
atg.cim.productconfig.appserver.PasswordTask finished.
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
atg.cim.database.CreateSchemaTask starting...
atg.cim.database.CreateSchemaTask finished.
atg.cim.database.ImportDataTask starting...
Combining template tasks...Success
Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
/CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
icing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
oreRepository
/CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
catalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
ce/pricing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
pository
/CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
iteRepository
/CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
atalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
pository
/CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
ts/Giftlists
/CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
entory/InventoryRepository
/CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
ofileAdapterRepository
/CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
OrderRepository
/CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
rder/OrderRepository
/CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
tores/StoreRepository
/CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
e/claimable/ClaimableRepository
... > Success
All Imports Completed Successfully
atg.cim.database.ImportDataTask finished.
atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
atg.cim.productconfig.appassembly.EarFileNameTask starting...
atg.cim.productconfig.appassembly.EarFileNameTask finished.
atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
Error Executing Batch File
atg.cim.worker.TaskException: Error deploying to weblogic
atg.cim.worker.TaskException: Error exececuting batch file
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
130)
at atg.cim.Launcher.startCimFlow(Launcher.java:278)
at atg.cim.Launcher.main(Launcher.java:99)
Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
at atg.cim.worker.Task.handleException(Task.java:72)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:159)
at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
pl.java:150)
at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
(HeadlessExecutorImpl.java:140)
at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
tchChooserExecutor.java:169)
at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
120)
... 2 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
red while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
utionWrapper.java:167)
at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:155)
... 7 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 20 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
1
at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 34 more
Nucleus shutting down
Nucleus shutdown complete
Thanks.This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
http://localhost:7001 instead of t3://localhost:7001
Thanks. -
Can't start WebLogic Server with SP6 and jdk1.2.2 using WebLogic Console
Hi All,
I am trying to install WebLogic 5.1 with SP6 under Windows NT 4.0 with SP6. My goal is to run JSP/Servlets. After going through all the steps described in SP6 Readme I am getting th following exception:
ava.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1408)
at weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:518)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
The installation document is pretty bad intermixing different types of installations. Where can I find steps or what do I need to do to get WebLogic to run with JDK1.2.2 if I want to start it up from WebLogic console only?
Thanks,
Mark.Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
-Alexis -
WebLogic Platform Uninstall Problems With SP3 and SP4
I am experiencing a problem (multiple times) WebLogic Platform's uninstall.
I am installing WebLogic Platform 8.1 SP3 from a CD. My machine's OS is Windows 2000 Professional SP4. I'm 99.9% positive that my environment is a supported configuration. I then upgrade to SP4 (once using SmartUpdate and another using the downloaded EXE from the support site, obviously on different runs).
After installing the original (SP3) from CD, I test the uninstall to see if it works. It does, so I cancelled out of the "splash" screen so nothing runs. I restarted my machine. I then upgrade to SP4. I restart the machine again. (As I mentioned before, I've tried this process twice, once with SmartUpdate and most recently with the SP4 EXE install). Without doing anything else, I test the uninstall again, but now, I'm getting the "splash" screen and a warning dialog with the message "D:\bea\weblogic81\uninstall". All methods of uninstall (Start Menu, Console, Silent, Control Panel > Add/Remove, etc...) fail.
In addition, when attempting to use SmartUpdate to downgrade back to SP3, the same things happens, but, in addition, I get another warning dialog with the message "Fail to launch the installer.".
Please help...
Others have experienced this problem since Jul 23, 2003 5:56 AM (based on the thread link below) and I can't seem to find any additional information on it...
http://forums.bea.com/bea/message.jspa?messageID=600005276&tstart=0
Sincerely,
Anthony MangioneI just got the problem. Help needed. Thanks
"J.D. Corbin" <[email protected]> wrote:
>
Arghhh...
When I try to uninstall WebLogic Platform the uninstaller errors out
saying "No
installation of WebLogic Platform found!, aborting"
I figured the install had problems so I tried reinstalling it to another
directory.
The installation went fine. I immediately tried to uninstall it and
got the
same error. Has anyone seen this or have a suggestion as to how to uninstall
the software.
it is driving me nuts.
J.D. -
Sharing Weblogic instance with Forms and ADF apps
We have both Oracle Forms and ADF (10.1.3.4) apps that we are planning to deploy to Weblogic. We are looking for the best approach for the architecture. Our user base is small (30-50 users) and the concurrent demand will be low as well.
Options we are considering are:
1. Two separate Weblogic servers, one for Forms and one for ADF
2. One WL server with 2 domains, one for Forms and one for ADF
3. One WL server and 1 domain serving both Forms and ADF. We'd probably create the domain for Forms initially then deploy the ADF apps to it as well as the ADF runtime libraries.
Are there any tips as to what we should consider in making our decision?1. Two separate Weblogic servers, one for Forms and one for ADF
this will actually segregate the applications.. both application will work independently.. still have to consider about the memory leaks as running two separate servers will take lot of resources.. no common library files access..2. One WL server with 2 domains, one for Forms and one for ADF
rather good approach..works well.. still each will work independently.. no common library dependencies..3. One WL server and 1 domain serving both Forms and ADF. We'd probably create the domain for Forms initially then deploy the ADF apps to it as well as the ADF runtime libraries.
both application can refer to common libraries.. -
Is there a problem with JMS and Weblogic?
Hi,
I am using JMS and Weblogic (Not Message Driven bean).
My problem is that after some time my listeners disappears.
I am sending them a message and instead of 6 listeners
I get only 4 messages.
So, My question is: Is there any problem working with JMS
and Weblogic???
Thanks,
Tal.
Too little information and a very vague question. Need more info.
"Tal" <[email protected]> wrote in message
news:[email protected]..
>
> Hi,
> I am using JMS and Weblogic (Not Message Driven bean).
> My problem is that after some time my listeners disappears.
> I am sending them a message and instead of 6 listeners
> I get only 4 messages.
> So, My question is: Is there any problem working with JMS
> and Weblogic???
> Thanks,
> Tal.
-
Don't know what to add. How do I get rid of Get Glue and have Firefox open by itself?
This sounds more like a Windows question, than a Firefox question. When you say that an image shows up every time you open your computer, do you mean every time you turn on your computer, or every time you start Firefox?
-
Error while integrating with Kerberos and AD
Hi,
Implementing Kerberos as the Desktop Single Signon Solution
Environment : Peoplesoft
OS : Redhat Linux
webserver: Weblogic 10.3.4
appserver : tuxedo 10gr3
While doing this implementation I was able to complete it successfully with the JDK linux has provided(1.6.0_22). However the weblogic comes preconfigured with jrockit jdk version1.6.0_24-R28.1.3-4.0.1. When I start the weblogic with jrockit jdk as java_home I am getting the following error.
<Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: com.peoplesoft.pt.desktopsso.kerberos.KerberosSSOFilter.
java.lang.IllegalArgumentException: No Configuration was registered that can handle the configuration named krbServer
at com.bea.common.security.jdkutils.JAASConfiguration.getAppConfigurationEntry(JAASConfiguration.java:130)
at javax.security.auth.login.LoginContext.init(LoginContext.java:243)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:334)
at com.peoplesoft.pt.desktopsso.kerberos.KerberosSSOFilter.init(KerberosSSOFilter.java:142)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:332)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:98)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:59)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
these are my runtime parameters
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=krbLogin.conf -Dsun.security.krb5.debug=true -Djavax.security.auth.useSubjectCredsOnly=false -Dweblogic.Chunksize=65536 -Djava.util.logging.config.file=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/psvault -Djavax.net.ssl.trustStore=/u01/app/psoft89/webserv/PREFRESH/piaconfig/keystore/pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/u01/app/psoft89/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dssl.debug=false -Dps_home=/u01/app/psoft89 weblogic.Server
The files krb5.conf and krbLogin.conf exists and have full access.
With the error above it seems that it is not able to pick the configuration file. But just by changing the JAVA_HOME to /usr/java/jdk1.6_022 it starts working.
I have raised this concern with Oracle almost a month before, but still haven't got any reply from them.
Please help.
Thanks and Regards
Anirudha SinghHi Faisal,
Thanks for your reply.
Yes I have given the complete path too.
This is the full command line of the weblogic server. I had modifed it to test if it is trying to pick it up from any default location.
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/etc/krbLogin.conf -Dsun.security.krb5.debug=true -Djavax.security.auth.useSubjectCredsOnly=false -Dweblogic.security.enableNegotiate=true -Dweblogic.Chunksize=65536 -Djava.util.logging.config.file=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/psvault -Djavax.net.ssl.trustStore=/u01/app/psoft89/webserv/PREFRESH/piaconfig/keystore/pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/u01/app/psoft89/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dssl.debug=false -Dps_home=/u01/app/psoft89 weblogic.Server
The file is located in /etc folder and has 777 permissions.
Thanks and Regards
Anirudha Singh -
GenerationType.AUTO doesn't work correctly with Kodo and MySQL
Greetings,
I'm migrating applications from JBoss/Hibernate to WebLogic/Kodo. The following column annotation:
@Id
@Column(name="CUSTOMER_ID")
@GeneratedValue(strategy = GenerationType.AUTO)
public long getCustomerId()
is supposed to generate auto-increment primary key in mysql. This is what happens with Hibernate. With Kodo, this seems to be equivalent with GenerationType.TABLE as a table named openjpa_sequence_table is created, containing sequence values. So what should one do in order to be able to use true auto-increment strategy with MySQL and Kodo ?
Many thanks in advance,
NicolasHi Nicolas,
By setting the generation strategy to AUTO, you're essentially letting the JPA provider choose which strategy to use. It looks like Kodo is using the TABLE strategy by default and Hibernate is using the IDENTITY strategy here. You can set the strategy to IDENTITY if you want Kodo to behave similarly to Hibernate. However, it's worth pointing out that there may be a reason for Kodo not using the IDENTITY strategy by default.
The docs at: http://edocs.bea.com/wls/docs103/kodo/full/html/ref_guide_pc_oid.html#ref_guide_pc_oid_pkgen_autoinc
point out the following:
"Statements inserting into tables with auto-increment / identity columns cannot be batched. After each insert, Kodo must go back to the database to retrieve the last inserted auto-increment value to set back in the persistent object. This can have a negative impact on performance. "
- Matt -
Integrated weblogic server Issue with Host name mapped to multiple IPs
I am running very simple ADF application from Jdev 11g (11.1.1.3.0).
Compilation was successful but weblogic server facing problem while starting.
It is showing HostAName is mapped with Multiple IP Addresses.
Please provide solution to fix the issue....
log is,
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Dec 23, 2010 11:49:42 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<Dec 23, 2010 11:49:44 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Dec 23, 2010 11:49:46 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:49:46 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2010 11:49:57 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 23, 2010 11:50:31 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:114b:ab6a:23b1:b44c:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.10.103:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:5efe:c0a8:a67:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:95ca:d058:6a51:53e8:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Warning> <Server> <BEA-002611> <Hostname "Raja-PC", maps to multiple IP addresses: 192.168.10.103, fe80:0:0:0:114b:ab6a:23b1:b44c%12, fe80:0:0:0:c48:60a:9d0d:7cda%13, 2001:0:4137:9e76:c48:60a:9d0d:7cda>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:4137:9e76:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Logger><error> ServletContainerAdapter manager not initialized correctly.
Edited by: user1158476 on Dec 23, 2010 3:05 PMThanks for reply...
If you look at the last line of log there is some error message:
<Logger><error> ServletContainerAdapter manager not initialized correctly.
after this no further logs and web page not open in Browser. -
Weblogic 8.1 App Server and IBM MQ Series 5.2 Issue
Hi All,
I am trying to create a bridge between Weblogic 8.1 App Server and IBM MQ Series 5.2 and i am facing issues.
Bridge works fine if i use QualityOfService="Atmost-once" and i am getting following error when i use
QualityOfService="Duplicate-okay".
Error:
<Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015> <An error occurred in bridge "MQSeries WebLogic Bridge" during the transfer of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
<Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026> <Bridge "MQSeries WebLogic Bridge" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.jms.bridge.internal.MessagingBridgeException.)>
Any suggestions or comments will be really appreciated.
Thanks
Suresh
It is weird that nothing shows up in the log after you turned on the debug.
Actually I knew somebody has run into the same problem once.
The problem disappeared after he did something on the MQSeries side (like
restart the system and something else). I did not know exactly what he did.
I am not sure if that will help you but worth trying.
If that does work either, I'd suggest that you contact the BEA Customer Support
and somebody will look at it for you in depth.
Thanks,
Dongbo
Suresh wrote:
> Thanks for following up on this.
>
> This bridge works with 6.1 app server and we are trying to use the same stuff
> for 8.1 app server too. No, we are not using XAConnectionFactory.
>
> Suresh
>
> Dongbo Xiao <[email protected]> wrote:
> >Is there any chance that the JMS connection factory on the MQSeries
> >side is a XAConnectionFactory?
> >
> >Suresh wrote:
> >
> >> I am using the debug options (-Dweblogic.Debug.DebugMessagingBridgeStartup="true"
> >> -Dweblogic.Debug.DebugMessagingBridgeRuntime="true") in my stratip
> >script,
> >> but, thats the maximum stack trace I can get. I am using jms-notran-adp.rar
> >for
> >> both QOS. Bridge is working fine when I use Exactly-once and repeatedly
> >getting
> >> the same message when I use Duplicate_okay. My destination queue is
> >not able to
> >> ackowledge the messge to the sender.
> >>
> >> Here I am giving nodes from my config.xml
> >>
> >> <MessagingBridge AsyncEnabled="false" BatchInterval="40000"
> >> Name="MQSeries WebLogic Bridge"
> >> QualityOfService="Duplicate-okay"
> >> SourceDestination="MQSeries Inbound Destination" Started="true"
> >> TargetDestination="WebLogic Inbound Destination" Targets="myserver"/>
> >> <JMSBridgeDestination
> >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
> >> ConnectionFactoryJNDIName="jms.InboundMessageConnectionFactory"
> >> ConnectionURL="t3://myserver:7001"
> >> DestinationJNDIName="jms.InboundMessageQueue"
> >> DestinationType="Queue"
> >> InitialContextFactory="weblogic.jndi.WLInitialContextFactory"
> >> Name="WebLogic Inbound Destination" UserName="username" UserPassword="pwd"/>
> >> <JMSBridgeDestination
> >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
> >> ConnectionFactoryJNDIName="cn=MQ_BROKER_1,ou=inboundConnectionFactories,ou=mqseries,ou=jms,ou=Systems"
> >> ConnectionURL="ldap://ldapServer:389/o=myroot"
> >> DestinationJNDIName="cn=queue2,ou=queue,ou=mqseries,ou=jms,ou=Systems"
> >> InitialContextFactory="com.sun.jndi.ldap.LdapCtxFactory"
> >> Name="MQSeries Inbound Destination"
> >> UserName="cn=admin,o=myroot" UserPassword="pwd"/>
> >> <Application Name="jms-notran-adp"
> >> Path="C:\bea\weblogic81\server\lib" StagingMode="nostage" TwoPhase="true">
> >> <ConnectorComponent Name="jms-notran-adp"
> >> Targets="rdoddapaneni3" URI="jms-notran-adp.rar"/>
> >> </Application>
> >>
> >> Thanks
> >>
> >> Tom Barnes <[email protected]> wrote:
> >> >By the way, if you are looking to improve performance, transactional
> >> >mode may actually be the fastest. See the JMS Performance
> >> >Guide white-paper on dev2dev for details.
> >> >
> >> >Suresh wrote:
> >> >
> >> >> Hi All,
> >> >>
> >> >> I am trying to create a bridge between Weblogic 8.1 App Server and
> >> >IBM MQ Series 5.2 and i am facing issues.
> >> >>
> >> >> Bridge works fine if i use QualityOfService="Atmost-once" and i
> >am
> >> >getting following error when i use
> >> >> QualityOfService="Duplicate-okay".
> >> >>
> >> >> Error:
> >> >>
> >> >> <Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015>
> >> ><An error occurred in bridge "MQSeries WebLogic Bridge" during the
> >transfer
> >> >of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
> >> >
> >> >> <Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026>
> >> ><Bridge "MQSeries WebLogic Bridge" encountered some problems in one
> >> >of its adapters or underlying systems. It stopped transferring messages
> >> >and will try to reconnect to the adapters shortly. (The exception
> >caught
> >> >was weblogic.jms.bridge.internal.MessagingBridgeException.)>
> >> >>
> >> >> Any suggestions or comments will be really appreciated.
> >> >>
> >> >> Thanks
> >> >> Suresh
> >> >
> >
-
Urgent:Error while picking up of data from Queue in Weblogic-10.0 with ALSB
I have put a mesage in queue using a business service and one of my proxy-service is picking the data from same queue whenever data is available.However, business service is working fine and data is being entered into the queue but proxy service is not able to pick the data from the same Queue(path and connection factory and Queue names are absolutely same for both the proxy service and business service. It's giving error:
*<ACTIVE ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <1241533175480> <BEA-387027>*
I am using ALSB for this.
Please help ASAP in the scenerio.
Regards
Gagandeep SinghSingh,
That's not an error message but simply an informational message that Welogic is tuning parameters to manage load.
You can use the JMS monitor inside WebLogic to monitor your queue and the number of pending messages.
What we have found, is that unless a topic is being fed data, the topic must be connected by the feeder before the subscriber, or the subscriber never receives data (why that is, I'm not sure).
I suggest adding a log entry as the very first thing in your receiving proxy service. Sent data to "error" and just write a test message. You should see that message every time you get a message. This takes out situations where namespace problems returns empty sets and a service doesn't look like it's working. You can also use the dashboard to monitor the receiving service, to verify that a service is being called/run.
Lastly, does your receiving service work when you run it in the debugger with manually entered data? It's been my experience that when I don't get a response, that my proxy service has errors in it. -
Install weblogic server 6 with sp1 failure in W2K
When I install weblogic server 6 with sp1 in W2K,
InstallAnyWhere display, when InstallAnyWhere process 100%,
there is nothing in my display about the Install.
there is weblogic600sp1_ and javaw in Windows Task manager->process.
I have install JDK1.3If I remember correctly, you should make sure that the JDK is not in your
path.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"yshyang" <[email protected]> wrote in message
news:[email protected]..
When I install weblogic server 6 with sp1 in W2K,
InstallAnyWhere display, when InstallAnyWhere process 100%,
there is nothing in my display about the Install.
there is weblogic600sp1_ and javaw in Windows Task manager->process.
I have install JDK1.3
Maybe you are looking for
-
I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- "This installation package could not be opened. Verify that the package exists and
-
How to create Transaction keys.
Hi All, I am MM consultnat I want to create a new Transaction keys in account determination. kindly let me know the steps to create.... hope to hear back from you all. Thanks&Regards, Chand
-
After updating a 10.2.0.1 client installation to 10.2.0.3 I noticed that the version number format had changed. Before the update the versions were in the form 10.2.0.1. Afterwards the newest version is in the form 1.102.3.0. This looks like a mistak
-
This one has me banging my head against the wall ... Login fails once every second as long as my laptop is logged in (docked or VPN'd) ... Login attempts stop once machine is shut down ... It's a state 11 error ... We have 60+ sql servers (single nod
-
Manual staging in oracle 11i Apps installations
Hi, I am newbei to oracle app 11i please let me know Is it possible to stage manually instead of using perl script. I am preparing folders manually and loading cds to those folders and then planning to start the installation will it work?? Regards, A