Weblogic does not support failover for the admin server.

There is a single point of failure in the current weblogic architecture. If the
admin server dies there is no automatic alternate admin server.

That is true, and we plan to fix it in one of the next major releases. Currently
the story is not as bad as it appears to be for following reasons:
1. Failure of admin server doesn't mean failure of already running managed server.
2. You can start a new server as admin server of domain with discover flag=true and
it will recognize all already exisiting managed server.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
naresh gupta wrote:
There is a single point of failure in the current weblogic architecture. If the
admin server dies there is no automatic alternate admin server.

Similar Messages

Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit
== This happened ==
Not sure how often
== started few days ago. previously never happened before.

I was loading a website, it then stated as below, it wasnt any of the problems stated below.
SERVER NOT FOUND
# Check the address for typing errors such as
ww.example.com instead of
www.example.com
# If you are unable to load any pages, check your computer's network
connection.
# If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Thus i checked the Page Info, it states that:
Security Info on page:
'''This website does not supply ownership information.
Connection not Encrypted.'''
Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit

Captivate 7 App packager Browser does not support some of the content message

Hi
I have succesfully creating a training app using the app packager for IOS (and to a certain extent android), however when you start the app a message starts up saying :"This browser does not support some of the content in the file you are trying to view. Use IE 9 or later, Safari 5.1 or later etc. " The interesting thing is that I am using the latest versions of both safari and chrome?
I checked out the javascript and and althouth there is an "if then" test, clearly it is not testing correctly. Has someone got a fix for this e.g. modifications to the code to make it work?
Regards
Mark

Hi Phani
Attached please find the ini file as requested.
I look forward to your response.
Kind regards
Mark
Geometric Progression
Cutting thru complexity
Tel: (+2721) 794 8332 or (0861) 000-615
Fax: (+27 11) 252 8089
Website: <http://www.gpifm.com/> http://www.gpifm.com
Authorised FSP (Licence No: 43224)
Bankseta accredited (No:557066)
BOTA accredited
<http://lnkd.in/sybY4S> linkedin3

Getting error ORA-20001: This person does not have preferences for the sele

*) I got user_id by following query
SELECT USER_ID, USER_NAME, FND_USER.*
from FND_USER where user_name = '205174';
*) resource_id by following query:
select * from APPS.PA_PROJECT_ASSIGNMENTS where RESOURCE_ID in (select RESOURCE_ID from APPS.PA_RESOURCES_DENORM where PERSON_ID
in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ) ;
*) person_id by following query:
select * from APPS.PA_RESOURCES_DENORM where PERSON_ID in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ;
and
Hi,
When I am running following query to submit timesheet, getting following warning msg
anonymous block completed
ORA-20001: This person does not have preferences for the selected effective date
Following is query
set serveroutput on size 1000000
DECLARE
l_tbl_messages hxc_message_table_type;
l_message fnd_new_messages.message_text%type;
i pls_integer;
l_app_blocks hxc_block_table_type := hxc_block_table_type();
l_app_attributes hxc_self_service_time_deposit.app_attributes_info;
l_time_building_block_id number;
l_new_timecard_id number;
l_new_timecard_ovn number;
l_bb_id number;
l_resource_id hxc_time_building_blocks.resource_id%TYPE := 3595; -- XPCPAY
l_start_time hxc_time_building_blocks.start_time%TYPE := fnd_date.canonical_to_date('2011/10/17 00:00:00');
l_measure hxc_time_building_blocks.measure%TYPE := 1;
l_element_type_id varchar2(80) := 'ELEMENT - 50809'; -- Jury Duty
l_comment_text hxc_time_building_blocks.comment_text%TYPE := '';
l_deposit_process hxc_deposit_processes.NAME%TYPE := 'OTL Deposit Process';
l_retrieval_process varchar2(250) := 'BEE Retrieval Process';
BEGIN
fnd_global.apps_initialize ( user_id => 3850 -- XPCPAY
, resp_id => 3595 -- Self Service Time
, resp_appl_id => 809 -- HXC
hxc_timestore_deposit.create_time_entry ( p_measure => l_measure
, p_day => l_start_time
, p_resource_id => l_resource_id
, p_resource_type => 'PERSON'
, p_comment_text => l_comment_text
, p_deposit_process => l_deposit_process
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_time_building_block_id => l_bb_id
hxc_timestore_deposit.create_attribute ( p_building_block_id => l_bb_id
, p_attribute_name => 'Dummy Element Context'
, p_attribute_value => l_element_type_id
, p_deposit_process => l_deposit_process
, p_app_attributes => l_app_attributes
hxc_timestore_deposit.execute_deposit_process ( p_validate => TRUE
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_messages => l_tbl_messages
, p_mode => 'SUBMIT'
, p_deposit_process => l_deposit_process
, p_retrieval_process => l_retrieval_process
, p_timecard_id => l_new_timecard_id
, p_timecard_ovn => l_new_timecard_ovn
-- OUTPUT MESSAGES --
DBMS_OUTPUT.put_line ('l_new_timecard_id = ' || l_new_timecard_id);
DBMS_OUTPUT.put_line ('l_new_timecard_ovn = ' || l_new_timecard_ovn);
if (l_tbl_messages.COUNT <> 0) THEN
i := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS(i));
l_message := fnd_message.get_string ( appin => l_tbl_messages(i).application_short_name
, namein => l_tbl_messages(i).message_name
DBMS_OUTPUT.put_line (l_tbl_messages(i).message_name);
DBMS_OUTPUT.put_line (l_message);
i := l_tbl_messages.NEXT(i);
END LOOP;
rollback;
else
commit;
end if;
exception
when others then
DBMS_OUTPUT.put_line(SQLERRM);
END;
/

Please check the following MOS notes:
ORA-20001: This Person Does Not Have Preferences For the Selected Effective Date [ID 876324.1]
ORA-20001: This Person Does Not Have Preferences For The Selected Effective Date [ID 761470.1]
Troubleshooting Guide for HRMS API Errors - ORA-20001 and APP Errors [ID 152259.1]
''This Person Does Not Have Preferences For The Selected Effective Date'' Message [ID 287581.1]
Diagnostics - Setup - Time and labour Person - Test failed [ID 397214.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Does Lightroom support tethering for the sony RX100?

Greetings,
Does Lightroom support tethering for the sony RX100?
Thank you!!

No. See http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

Fatal error: Client does not support authentication protocol requested by server; consider upgrading MySQL client

Fatal error: Client does not support authentication protocol
requested by server; consider upgrading MySQL client in
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on line 9
This is the error that comes up on the server where the site
sits. The database is working on my local machine with the local
settings, but wont connect due to the above.
I think im using MySQL client 3.23 How do i upgrade?
I found this on MySQL site:
http://dev.mysql.com/doc/refman/5.0/en/old-client.html
I'm not sure how to edit the connection string to make it
accept the vaules.

The_FedEx_Guy wrote:
> Fatal error: Client does not support authentication
protocol requested by
> server; consider upgrading MySQL client in
>
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on
> line 9
> I think im using MySQL client 3.23 How do i upgrade?
The MySQL client that the error refers to isn't the version
of MySQL,
but the MySQL library bundled with PHP. It sounds as though
your hosting
company has upgraded to MySQL 4.1 or higher, but is still
using PHP 4.
> I'm not sure how to edit the connection string to make
it accept the vaules.
You can't. It's the way that the user account passwords are
stored in
MySQL. You need to get the hosting company to upgrade to PHP
5 or to
reset the passwords in MySQL using the OLD_PASSWORD()
function. This
needs to be done by someone with top-level administrative
privileges on
the database.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

Does LR6 support tethering for the Canon EOS 70D

Hi
does LR finally support tethering for the Canon EOS 70D ?
Uli

Hi Ulrich,
It seems Canon EOS 70D is still not support in Lightroom6.
Please refer the following the list of supported cameras.
Tethered camera support in Lightroom
Hope this helps.
Regards,
Sumit Singh

Cisco DCNM 6.2 does not support most of the switches in my network

Hi All,
I have just installed Cisco DCNM 6.2. I have run a discovery using SNMP v1 my core switch which is a 3750G stack. DCNM discovers all my switches but does not support the 2960 and 3750 switches. The only switches I can select to manage and are supported are a 4510 and 3550. I have also run another discovery using SNMPv3 on a different core switch (Nexus 3K) at one of our remote sites. DCNM found all the other 2960s in that network but I can only select the two Nexus switches in the core to manage. What do I need to do to be able to manage all my switches switch?
Thank you in advance.

Hello,
DCNM is meant for data centre network management and as such only supports the MDS, Nexus and the 6500 series switches, see the RN under supported Cisco platforms and software:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/dcnm/release/notes/dcnm_6_2_5a_relnotes.html#pgfId-314209
For the discovery issue DCNM should 'see' the other devices so you need to have a look at your SNMP and CDP (used for neighbour discovery on a per hop basis) settings on each of the devices.
For an software package to manage LAN/WAN environments you really need to be looking at Cisco Prime LMS.
We are going through the same problem, it would be nice to be able to manage the DC and LAN from DCNM.
Regards
Daniel Hunter

How to change the machine name for the admin server?

Hi, I've incorrectly set the machine name for my admin server. I now need to change this, but it's not editable (WLS 10.3.3).
Is there a way to edit configuration files to get it changed?
Thanks
Jason

Seems all I needed to do was edit config/config.xml (under my domain's path) and change the machine name manually (before shutting the admin server down).
Regards
Jason

How to stop Firefox demanding authentication for each page of the same website (IE does not do this for the same site))

I have a website (Still being developed but at the testing stage) which works fine in IE but when viewed in Firefox It insists on authentication at every page, instead of just one login it repeats the login at every page.

Hi,
If it's Basic auth, please check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If it's okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in another location separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
For NTLM authentication, you can try to automatically trust the domain in the [http://kb.mozillazine.org/Network.automatic-ntlm-auth.trusted-uris network.automatic-ntlm-auth.trusted-uris] list in [http://kb.mozillazine.org/About:config about:config], eg. domain.com
Not sure, but for Kerberos, I think you would have to use '''network.negotiate-auth.trusted-uris''' instead.

My iPhone's sound does not work except for the alarm and the volume bar is not there.

Hi, thank you in advance if you can help.
When my iphone 4 is not plugged in to headphones the sound does not work, and if I try to adjust the sound with the plus and minus buttons in the side it comes up like normal saying "Ringer" but then there is no bar underneath it. Sometimes the sound will work for a couple of minutes. However, there is definitely no problem with the speaker as the alarm always works perfectly fine.
I have tried restoring it, this did not help.

what you could even try is to write down a few contacts that you would need to get through a single day, restore it to factory, punch in those few odd contacts,
No. What he should be doing is syncing his contacts to an app on his computer or cloud service, then sync them back to the phone (without restoring the backup).
Never rely on the backup for contacts. The contact info stored there may be incomplete and is only meant to maintain the recent calls and favorites lists.

4EA2 the Detail display for views does not show comments for the view

I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.

Hi Penny Halsall,
Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
OR
You can generate the associated HTML code from this page :
https://developers.facebook.com/docs/plugins/
Regards
Sonam

In hotel w/wireless network. ATV finds network, but does not ask me for password, so can't communicate through network. MacBook Air, iPad and 2 iPhones connected to hotel wireless, but ATV does not ask me for the password. Any ideas?

I have succesfully connected a MacBook Air, an iPad and two iPhones to the wireless network in this hotel. Apple TV can see the network and "connects" to the network, but w/o asking for password. I expected to see a screen immediately after selecting the network that asked me for the password as did all of my other devices. ATV did not ask me for a password. When I go to Settings>General>Network, it shows the name of the hotel wireless network, but I can't communicate with the network. It can't set date and time. When I try to enter my Apple account name and password, it tells me it can't log in w/o setting date and time.
Any ideas on how to connect to this network?

I am having the same problem. In my hotel when I connect my laptop a screen will pop up and you have to hit the button "I Accept Terms". However I can't do that with the ATV. I called the internet provider and they said they could not help me. Any ideas? Do you think the guy just doesn't know what he can do for me? I am thinking I will call later and hope to get a different technician who might know how to help connect me.

I would like to ask why apple does not support Whatsapp for Ipad

Dear All,
As a relatively new apple user, i find it difficult to understand as to why apple doesnt support whatsapp for ipad. I am mostly on the go and carry my ipad for business purpose, and as you know, these days social networking is an intergral part of our lives, i find it perplexing as to why ipad doesnt support whatsapp. Almost all of my collegue's and friend are using this, it becomes increasingly diffcult to multitask between a phone and an ipad.
Could Apple kindly make it available for users. It would be really convinient, especially for people in the age group 50+ who would like to be in touch with their families regularly.
Regards
Bala

Whatsapp is meant for phones, authenticated via the voice carrier link. That's what the developer (nowadays Facebook, who bought the company) decided to do with their app. Hacking that design sounds dangerously against the TOU for discussion in these forums.
You can always search in other message boards outside Apple's regulations for what you want. Regardless, you will need an iPhone to authenticate and activate you Whatsapp account.

Weblogic does not support failover for the admin server.

Similar Messages

Maybe you are looking for