Weblogic server 10.0.1 stop all request when memory drop and grow again

We are running weblogic server 10.0.1 on window server 2003 with a custom applicaiton . our heap size is set to 1024MB min and max. Usually it is running normally, but at some ocassion, we find the webogic process memory drop to 80K and then grow gradually( from the task window). During this period, the server stops all requests until the process memory reach about 1000MB as we look at the server console. It starts process again and accept requests. After the requests are cleared, the server resume normal. Is it a full GC or window sever memory allocation when its memory is low? I cannot figure out this issue.
Much appreciated if there is any advices.
Keith

First of all, when you go to monitor tab you see all the threads from self tuning thread pool. This includes all the threads in the server, not only the ones allocated to your workmanager.
This is how i think its working...
1) All your threads are hung..you have 300 hogging threads , that reaches your max thread constraints on your work manager.. weblogic is not going to allow any more requests from that work set to take up threads.. and capacity is both executing and queued requests..you got 150 pending requests and 300 hogging.. so a total of 450, your capacity.
2) Its not 631 threads, its 631 requests, weblogic must be reporting all the threads in the queue at the time you monitored it.
3) The reason for one cluster to go down would be that those servers in that cluster were waiting for some resource. As you have different applications in the two clusters...there must be some resource that cluster1 uses which was not available. you can see what those threads were doing by getting thread dumps when this happens.

Similar Messages

  • When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

    When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
    'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
    I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
    HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
    http://www.musicstudentsforhire.co.uk/musicians-samples.html
    It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

    I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

  • TS1702 how do you stop itunes from downloading apps over and over again and again like for ever it wont stop  help.

    how do you stop itunes from downloading apps over and over again and again like for ever it wont stop  help.
    i tryed everything i  can in the setting and so on , i even clicked on the downloads arrow to pause it and delete them but like i said it will now stop.
    theres apps i just dont want. theres a list of them but theres not a place were i can get rid of them. it also says some stuff about icloud yeah right like i have ios 5 or 7 ha . pod touch 2 is what i have lol . plz help thanks.

    to the right by search library theres an arrow there click on it : it will show you what it is downloading , from there you can pause and select all and delete them but still will continue to download them if you tell itunes to check for downloads. that download engien is crazy i tell yeah.
    no matter what we do it will still download them trust me i tryed everything and i also went to icloud to see if it was there but to what i see is that there is no apps there this is some crazy itune program that needs to remade.

  • Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

    I've been building a site in Muse successfully until today when I get this error message in the browser, publishing to business catalyst as a test bed:
    Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.
    Clearing the cache has no effect and I have checked the assets and there are no error symbols. This happened after trying a google translate code in the <head> and a HTML snippet on the master template, I've since removed it but that the last action I took that I can think may have had an effect.
    Viewing the source of the page in Safari hash;t helped other than it shows ALOT of html (including some elements i can;t relate to in my site design) and states there are three errors:
    [Warning] Invalid CSS property declaration at: ; (index.html, line 1)
    the site is Kingsdown Holiday Homes - Self Catering Chalet Rental at Kingsdown Park, Kent | Home
    I started this site in Muse CC and then recently upgraded to Muse CC 2014, and I had install issues so deleted the original program (this then forced the download of the new version which was not automatically downloading even though CC notified me that an update was required.
    Any information gratefully received.
    Thanks,
    Andrew

    Same problem here but it has nothing to do with a cellular connection.
    Created the site http://www.blackdot.com in Muse 7.4.3 with no issues. Just updated the .muse file today to Muse CC 2014 and reloaded to our web server. Now I am getting the error "Some files on the server may be missing or incorrect." when viewing the site from the latest version of all browsers (Safari, Firefox, Chrome) on a Mac and all browsers on a PC (Safari, Firefox, Chrome, Explorer), also mobile Safari on an iPad.
    My connection is wired broadband, not a mobile or wireless connection. I am not using the Muse "Upload to FTP host…" option and will not be using it. I am simply exporting as HTML and copying the files to my server. I have deleted all files from the web server and recopied the updated site with the same error result. This is the exact same procedure I used to load the initial site with the prior version of Muse.
    It does not seem like there is an existing solution to this problem although many others are experiencing it. It looks like I will need to manually edit each page to remove the error message coding from the html files. Any tips on how to strip out the alert message from the html?
    UPDATE
    For anyone else experiencing this issue, I was able to edit the .html files for my site to remove the code responsible for this alert message. If you wish to edit your .html files you must make the same edit to every .html file in your site export including the top level "index.html" and all .html files inside the "tablet" and "phone" folders if you have them.
    The coding to remove is at the bottom of each .html file:
    (Muse.assets.outOfDate.length||Muse.assets.required.length)&&alert("Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.")
    Make sure you do not remove any semicolons or braces {} when making this edit. Just remove the text shown above. You will obviously need to remake these edits if you export your site as HTML in the future.

  • Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.

    Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.

    Hi Gauray
    I can see it well but someone how works at the congress it appears:
    http://www.oeso.org/monaco_conference2015/endorsements.html
    Do you have an updated to clear browser cache automatically in Adobe CC Muse?
    If not, how can I prevent browser cache?
    It is correct if I put in Page Properties for Home Master, in HTML for  ha scritto:
    Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.
    created by Gaurav Sharma in Help with using Adobe Muse CC - View the full discussion
    Hi,
    Could you please provide a URL of the site, so we can check it. Also, take a look to this thread, discussing the same
    Some files on the server may be missing or incorrect
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6767913#6767913
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • What does this mean? The mail server responded: Too many messages. Please check the message and try again.

    I use BT yahoo mail with Thunderbird 24.6.0 in the last few days i've started getting this message when sending messages:
    An error occurred while sending mail. The mail server responded: Too many messages. Please check the message and try again.
    Now sometimes the messages are sent anyway and sometimes not. If I re-send sometimes it works and sometimes not. I've contacted BT 'tech support' who tell me there is nothing wrong with them or their servers and as webmail works ok they won't help. I strongly suspect it IS a BT issue, Any clues to fix this?

    The message means BT are lying basically. I have just spent the best part of an hour on chasing what limits BT place on mail sending... the internet contains a void.
    The closest thing I can locate is a BT rep here https://community.bt.com/t5/Email/E-Mail-message-limit/m-p/1045228/highlight/true#M17523 refusing to identify what limits they impose but advising their switch to critical path has more stringent controls. AFAIK Critical path is ca mail software solution sold by OpenWave Messaging http://owmessaging.com/
    So your paying for a totally undefined service. Congratulations!

  • While trying to access my local network I get the message..."The page could not be opened because server cannot be found."  This, after updating to Yosemite and paying (again) for the server app.

    while trying to access my local network I get the message..."The page could not be opened because server cannot be found."  This, after updating to Yosemite and paying (again) for the server app.

    It's absolutley scandalous that a company with Apple's resources can let this happen.  They should have staggered the release by region rather than opening the flood gates.  The upgrade itself took me about 10 attempts to download it, and then I thought I was home free.  That was until it rebooted and won't activate.  It's over 2 hours now.
    Scandalous!

  • Problem when I starting Weblogic Server Under Eclipse Suddenly Stop

    Hi everyone:
    I've a problem, I'm working with IDE Eclipse 3.2 and weblogic server 8.1 I need to debug the application, when I'm trying to start the server and everything look fine and almost at the end suddenly the server stop with this message:
    Stopping Weblogic Server...
    Failed to connect to t3://localhost:7001: Destination unreachable; nested exception is:
         java.net.ConnectException: Connection refused; No available router to destination
    please I need Help.
    Thanks in advance

    i still haven't found a solution to the problem with the specific setup i originally mentioned (wls 9.0, eclipse 3.2 on solaris/sparc). even after upgrading to wls 9.2, the exact same bug occurs.
    in the end, i just gave up on the standalone eclipse 3.2 and started using workshop for weblogic 9.2 that comes bundled with the wls 9.2 installation; and the problem does not occur with that setup.
    wl workshop 9.2 is based on eclipse 3.1. so if you want to use regular eclipse with regular wls, then maybe eclipse 3.1 is the most stable version to use with wls. hth.

  • Mail (again!) .. how do I clean all existing settings of Mail and start again?

    I have (Yosemite) Mail linking into BT.  I have a problem that occurred with Mavericks and continues with Yosemite Mail. Mail works fine for a month or two then goes wrong... almost a pattern!  Usually I put it right by deleting the account and set it up again and it works for a while.  I am so frustrated because I do not understand the intricacies of software and programming.  Now it is refusing to send emails in both my and my wife's account.  iCloud works (after I deleted and set it up again).  But I need our BT separate accounts.  Is there a way of deleting all the old bits and pieces of files that might be 'remembering' bad settings and starting again? Is there a fix?  I am alarmed by the smart-alec comments of people with 'level 5/whatever' who say there is no issue.  There damned well is!

    There are a plethora of problems noted here with BT's email service, but similar could be said for various others.
    You could delete the ~/Library/Mail folder along with the containers and preferences.
    Note that deleting the Mail folder will delete all of your email stored on the Mac.
    Inside the Mail/V2 folder are folders for each account. You could start with deleting those and the Containers, Prefs.
    Containers: ~/Library/Containers/com.apple.mail
    Preferences: ~/Library/Preferences/com.apple.mail.plist
    However, if it works for a period of time, then stops working, it isn't dredging up an old setting from somewhere. The settings are what they are at the time; no history.
    What can possibly happen, and does seem to happen with Mail periodically, is that the Keychain stores multiple passwords for the accounts.
    Open Keychain Access, select login keychain, and then search for your email accounts. Delete any entries you have for the accounts.
    Then, open Mail and enter the correct passwords for the accounts. That will ensure there is only one password being attempted.

  • How can I remove a child swf and stop all sounds when parent closes?

    Hi All,
    I am new to actionscript 3 and trying to learn as I go. The problem I am having is the following:
    I have a carousel of images that load an external swf movie with a FLVPlayback component on it. The problem is that when the external swf unloads the sound of the FLVPlayback component continues to play. I am using a carousel component I found online to load the images and each image loads an external swf file. here is the code for it.
    import com.carousel.DegreeCarousel;
    import com.carousel.data.CarouselDO;
    import com.carousel.data.AngleDO;
    import com.carousel.data.ItemDO;
    // DEFINING THE CAROUSEL OBJECT
    var carouselSettings:CarouselDO = new CarouselDO();
    carouselSettings.radiusX = 300;
    carouselSettings.radiusY = 0;
    carouselSettings.fov = 50;
    carouselSettings.transitionTime = 1;
    carouselSettings.ease = "easeInOutQuint";
    carouselSettings.useToolTip = 0;
    carouselSettings.useBlur = 1;
    carouselSettings.maxBlur = 8;
    carouselSettings.reflectionAlpha = 0.2;
    // DEFINING ANGLES SETTINGS
    var angleSettings_arr:Array = new Array();
    angleSettings_arr[0] = new AngleDO({angle:0,alpha:1,scale:0.5});
    angleSettings_arr[1] = new AngleDO({angle:90,alpha:1,scale:1});
    angleSettings_arr[2] = new AngleDO({angle:180,alpha:1,scale:0.5});
    // DEFINING THE ITEMS
    var prefix = "content/thumbs/"
    var galleryItems:Array = new Array();
    galleryItems[0] = new ItemDO({thumb:prefix + "image_1.jpg", content:prefix + "swf1.swf", contentType: "flash"});
    galleryItems[1] = new ItemDO({thumb:prefix + "image_2.jpg", content:prefix + "swf1.swf", contentType: "flash"});
    galleryItems[2] = new ItemDO({thumb:prefix + "image_3.jpg", content:prefix + "swf1.swf", contentType: "flash"});
    // PLACING THE CAROUSEL TO STAGE
    var carousel:DegreeCarousel = new DegreeCarousel(carouselSettings,angleSettings_arr,galleryItems);
    carousel.x = stage.stageWidth * .5;
    carousel.y = stage.stageHeight * .5;
    this.addChild(carousel);   
    // KEYBOARD NAVIGATION
    // KEYBOARD EVENTS
    stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);   
    function keyDownHandler(e:KeyboardEvent):void
        // left
        if(e.keyCode == 37)
            carousel.left(1);
        // right
        if(e.keyCode == 39)
            carousel.right(1);
        // top
        if(e.keyCode == 38)
            carousel.prevCycle();
        // Down
        if(e.keyCode == 40)
            carousel.nextCycle();
        // Space
        if(e.keyCode == 32)
    The external movie loads fine. Then the external swf calls for a second swf containing a video. This is the code that is used to load the swf:
    import flash.net.URLRequest;
    import flash.display.Loader;
    import flash.events.Event;
    import flash.display.MovieClip;
    import flash.events.MouseEvent;
    var myVideo:URLRequest = new URLRequest("myvideo.swf");
    var video:Loader = new Loader();
    video.load(myVideo);
    this.addChild(video);
    When the carousel unloads, it unloads both movies but the sound keeps on playing.
    Is there any way to stop the sound from keep playing?
    Thank you very much!!
    -M

    You want to stop the audio from playing and also downloading more video/audio if it is still downloading when you go to a new keyframe where the video display/component or mp3 player is removed from the stage because it's keyframe ended or do not exist anymore but you still hear the audio.
    Add an event listener to your video playback component that calls a function when the flash player tries to remove the video plaer from the stage that stops the netstream or at least stops/pauses the video playback.
    [link removed]
    //sample NetConnection and NetStream classes when the video player is removed from the stage tell the NetStream to stop playing or downloading the content with .close();
    var connection:NetConnection = new NetConnection();
    connection.connect(null);
    var stream:NetStream = new NetStream(connection);
    addEventListener(Event.REMOVED_FROM_STAGE, videoRemovedFromStage);
    function videoRemovedFromStage(e:Event){
       stream.close();

  • Does Weblogic server 10.3.4 or 10.3.6 use OpenSSL and if yes get affected by The heartbleed vulenrability

    How to find if Weblogic Sever 10.3.4 or 10.3.6 is affected by the OpenSSL hearbleed bug.
    If so how to fix it. ?

    Hi,
    Have look at the below URL :-
    http://www.oracle.com/technetwork/topics/security/opensslheartbleedcve-2014-0160-2188454.html
    Regards,
    Prakash.

  • Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event??  It asks "for all events or only this event" if i change the time.  But it changes ALL events when i try and switch calendars.  Any help??

    I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar.  I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts".  But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days.  I want to change that in my calendar.  When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event.  no problem....just this single event.  but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event.   can anyone help with this???  am i doing something wrong?  is there a way to do this or not with the new iCal program???  i used to do this and never had any problems.    Thank you!

    You need to follow iPhoto terms since we only know what you tell us
    what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
    The basic default view of photo is by event (iPhoto '08 and later)
    Exactly what you you trying to do?
    LN

  • IPad delete all files when i sync and install iOs 5

    Hello, yesterday i sync my iPad to install iOs 5, first i synchronize, after i mada a security copy from my iPad, next this i start new installation, the iTunes made the download of iPad firmware, and after this the itunes star to made a security copy, and the installtion finish, next i restored my iPad with first security copy and my all apps disappearad, next i restored my iPad again but now with the second security copy, but nothing!
    More a thing, in iPad the music stay and the folder stays with the Safari connection (shortcuts).
    I want to recover my all apps.
    Please help me

    I think no, look:
    In iTunes say no on sync my app, but how did this happen, i never disable this!

  • Find my iPhone keeps erasing my phone after I found it and restored it from a previous backup.  How do I stop it from erasing it over and over again?

    A few days ago I lost my phone while it was in Airplane mode and initiated a remote wipe from Find my iPhone.  I recovered my phone (still in airplane mode) and immediately backed it up.  Once that was done, I took it out of airplane mode and let Find my iPhone wipe it.  After the wipe, I restored it from my previous back up, but every time the phone connects to a cellular network or just to wifi, it gets wiped again.  This occurs even if I have location services and Find my Iphone turned off on the phone!  I tried removing the phone from my device list in Find my iPhone, but that still didn't help.
    The phone currently has IOS 6 on it.  I'm downloading IOS 7 to see if that makes any difference.  Anyone have any ideas in the meantime?

    It is probably still worth while taking it to an Apple store for a possible OOW replacement and let them make the decision, as it was broken before the OP took the back off.
    See note below...

  • How do I stop losing drive when using iTunes and Shuffle

    When I plug my shuffle into a USB port I see the device in My Computer nd iTunes opens up. As soon as I try to do something in iTunes, like autofill, the device disappears in My Computer and the autofill brings back an error message that it can't find the device. Help!!!!

    You'll need to install iTunes on your laptop and restore the Phone there.
    There is no way around it.
    itunes.apple.com
    http://support.apple.com/kb/HT1414

Maybe you are looking for