Websense web filtering not working with 2911 with zone based firewall

Hi,
Any one ran into this issue
We use websense for guest wifi but i dont see requests hitting websense server
config is below
class-map type inspect match-any test-1
match protocol http
policy-map type inspect Wifi-test
class type inspect test-1
inspect
urlfilter websense-parmap
class class-default
drop
parameter-map type urlfilter websense-parmap
server vendor websense 10.10.1.4
source-interface GigabitEthernet0/2
allow-mode on
cache 100
zone-pair security Wifi-in-out source Wifi destination outside
service-policy type inspect Wifi-test
interface GigabitEthernet0/1
description Internet
ip address 192.168.10.1 255.255.255.0
ip nbar protocol-discovery
ip nat inside
ip virtual-reassembly in
zone-member security Wifi
interface GigabitEthernet0/2
description LAN
ip address 10.10.4.1 255.255.255.0
zone-member security inside

Hi Stan,
You should be able to adapt this config example to your environment.
Andy-
class-map type inspect match-any http-cm
match protocol http
parameter-map type urlfpolicy websense websense-parm
server <websense server IP>
source-interface <lan interface>
allow-mode on
truncate hostname
class-map type urlfilter websense match-any websense-cm
match server-response any
policy-map type inspect urlfilter websense-pm
parameter type urlfpolicy websense websense-parm
class type urlfilter websense websense-cm
server-specified-action
policy-map type inspect Inside->Internet-pm
description Inside trusted to Internet
class type inspect http-cm
inspect
service-policy urlfilter websense-pm
class type inspect Inside->Internet-cm
inspect
class class-default
drop
zone-pair security Inside->Internet source Inside destination Internet
service-policy type inspect Inside->Internet-pm
! to check status & url block counts
show policy-map type inspect zone-pair Inside->Internet urlfilter

Similar Messages

Web Report not working with parameter form

Hi,
I have a report which has got a parameter form. This report is
running fine in client/server environment. But when I deploy the
same report on web (CGI) using PARAMFORM=YES, I am getting the
parameter form and after pressing the SUBMIT button I am getting
a blank report under the following two cases even though I have
data for that query:
CASE1: <input type="hidden" name="desformat" value="html">
then I am getting the report with no data retrieved.
CASE2: <input type="hidden" name="desformat" value="pdf">
then I am getting completely blank report (no logo, no column
titles, etc.)
See the HTML code below. Remember, the same thing is running
fine in client/server environment. Moreover, if I make a HTML-
coded form for the report then everything on the client's
browser is running fine. But this is not what we want, 'coz we
are running the "BEFORE PARAMETER FORM" trigger in the report.
So, should I conclude that web-reports does not work with the
parameter forms?? Is it a bug???
Regards
Moiz
----------HTML Code------------------
<form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
bin/rwcgi60.exe">
Select the Weekend Date for which you would like to see your
Timesheet report
<input type="hidden" name="server" value="repserver">
<input type="hidden" name="report" value="timesheet.rdf">
<input type="hidden" name="userid" value="696122/696122@ors">
<input type="hidden" name="destype" value="cache">
<input type="hidden" name="desformat" value="html">
<input type="hidden" name="paramform" value = "yes">
<input type="submit" value="Run Report">
</p>
</form>
-------HTML Code END------------------
null

No pal, that's not the problem. The problem lies with the
"BEFORE PARAMETER FORM" report trigger on the web. Check this
out on ur report server and u will understand my problem.
Moiz
Ramonito Te (guest) wrote:
: I think the cause is the missing question mark after
rwcgi60.exe.
: Anyway here is my html file that runs under cgi. Hope this
helps.
: <HTML>
: 
: <FORM METHOD=POST
: ACTION="http://ntserver1/ows-bin/rwcgi60.exe?" METHOD="POST">
: 
: <INPUT name=server type=hidden value="ReportsServer">
: <INPUT name=paramform type=hidden value="yes">
: <CENTER><H1>Set Reports Multi-tier Server Parameters </H1>
Report Name: <INPUT name=report type=text value="c:
: \orant\webdemo\deptemp.rdf">
: Database Connection: <INPUT name=userid type=text
: value="scott/tiger@orcl81">
: <INPUT name=destype type=hidden value="cache">
: Output Format: <SELECT name=desformat> <OPTION value=HTMLCSS
: selected> HTMLCSS <OPTION
: alue=PDF> PDF </SELECT>
: <HR><INPUT type=submit value="Run Report!">
: </CENTER> </FORM> </HTML>
: lue="Run Report!">
: </CENTER> </FORM> </HTML>
: M. Moizuddin (guest) wrote:
: : Hi,
: : I have a report which has got a parameter form. This report
: is
: : running fine in client/server environment. But when I deploy
: the
: : same report on web (CGI) using PARAMFORM=YES, I am getting
the
: : parameter form and after pressing the SUBMIT button I am
: getting
: : a blank report under the following two cases even though I
: have
: : data for that query:
: : CASE1: <input type="hidden" name="desformat" value="html">
: : then I am getting the report with no data retrieved.
: : CASE2: <input type="hidden" name="desformat" value="pdf">
: : then I am getting completely blank report (no logo, no
column
: : titles, etc.)
: : See the HTML code below. Remember, the same thing is running
: : fine in client/server environment. Moreover, if I make a
HTML-
: : coded form for the report then everything on the client's
: : browser is running fine. But this is not what we want, 'coz
we
: : are running the "BEFORE PARAMETER FORM" trigger in the
report.
: : So, should I conclude that web-reports does not work with
the
: : parameter forms?? Is it a bug???
: : Regards
: : Moiz
: : ----------HTML Code------------------
: : <form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
: : bin/rwcgi60.exe">
: : Select the Weekend Date for which you would like to see your
: : Timesheet report
: : <input type="hidden" name="server" value="repserver">
: : <input type="hidden" name="report" value="timesheet.rdf">
: : <input type="hidden" name="userid" value="696122/696122@ors">
: : <input type="hidden" name="destype" value="cache">
: : <input type="hidden" name="desformat" value="html">
: : <input type="hidden" name="paramform" value = "yes">
: : <input type="submit" value="Run Report">
: : </p>
: : </form>
: : -------HTML Code END------------------
null

Filters not working with Tomcat 5

Hi,
I've attempted to implement a filter in my JSP program. Below is the web.xml I'm using and the filter implementation.
The problem is doFilter simply isn't being called. init is called because when I do an ant reload it print my error into the log but doPost never prints anything anywhere. Please help!!! I'm completely foxed.
I thought it might be something to do with the FilterConfig as I don't understand how its set or called but as I don't understand, I don't know?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
    <description>themoves.co.uk Content Management System</description>
    <display-name>themoves.co.uk CMS</display-name>
    <filter>
         <filter-name>authFilter</filter-name>
         <filter-class>uk.co.themoves.AuthenticationFilter</filter-class>
    </filter>
    <filter-mapper>
         <filter-name>authFilter</filter-name>
         <url-pattern>/Controller</url-pattern>
    </filter-mapper>
    <servlet>
        <servlet-name>Controller</servlet-name>
        <servlet-class>uk.co.themoves.Controller</servlet-class>
    </servlet>
    <servlet-mapping>
        <servlet-name>Controller</servlet-name>
        <url-pattern>/Controller</url-pattern>
    </servlet-mapping>
    <session-config>
        <session-timeout>15</session-timeout>
    </session-config>
    <welcome-file-list>
        <welcome-file>/WEB-INF/welcome.jsp</welcome-file>
    </welcome-file-list>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/fmt</taglib-uri>
      <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/fmt-rt</taglib-uri>
      <taglib-location>/WEB-INF/fmt-rt.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/core</taglib-uri>
      <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/core-rt</taglib-uri>
      <taglib-location>/WEB-INF/c-rt.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/sql</taglib-uri>
      <taglib-location>/WEB-INF/sql.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/sql-rt</taglib-uri>
      <taglib-location>/WEB-INF/sql-rt.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/x</taglib-uri>
      <taglib-location>/WEB-INF/x.tld</taglib-location>
    </taglib>
    <taglib>
      <taglib-uri>http://java.sun.com/jstl/x-rt</taglib-uri>
      <taglib-location>/WEB-INF/x-rt.tld</taglib-location>
    </taglib>
</web-app>Filter implementation
package uk.co.themoves;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
import java.io.IOException;
public class AuthenticationFilter implements Filter{
     private static final String LOGIN_PAGE = "/login.jsp";
     private FilterConfig config = null;
     private Connection db = null;
     public void init(FilterConfig _config) throws ServletException{
          System.err.println("init successful");
          this.config = _config;
          //do a database connection here
          if(db == null){
               try{
                    Class.forName("org.gjt.mm.mysql.Driver");
                    this.db = DriverManager.getConnection("jdbc:mysql://localhost:3306/themoves", "cwaig", "UUyGiRPE");
               } catch (Exception e){
                    System.out.println("error Connecting to themoves DB: " + e.toString());
     public void doFilter(ServletRequest _req, ServletResponse _res, FilterChain _chain) throws IOException, ServletException{
          System.err.println("doFilter");
          //cast the Servlet to a httpServlet
          HttpServletRequest httpReq = (HttpServletRequest) _req;
          HttpSession session = httpReq.getSession();
          String uid = httpReq.getParameter("uid");
          String password = httpReq.getParameter("pass");
          //if action is login then login else check
          String action = (String) httpReq.getParameter("action");
          if(action.equals("login")){
               //check the username and password
               UserManager userManager = new UserManager(this.db, uid, password);
               if(userManager.auth()){
                    //set session variable and carry on
                    session.setAttribute("uid", uid);
                    _chain.doFilter(_req, _res);
               } else {
                    //go back to the login page
                    RequestDispatcher rd = httpReq.getRequestDispatcher(LOGIN_PAGE);
                    rd.forward(_req, _res);
          } else {
               //check the session to make sure they are logged in
               String session_uid = (String) session.getAttribute("uid");
               if(session_uid == null){
                    RequestDispatcher rd = httpReq.getRequestDispatcher(LOGIN_PAGE);
                    rd.forward(_req, _res);
               } else {
                    //set session variable and carry on
                    session.setAttribute("uid", uid);
                    _chain.doFilter(_req, _res);
     public void destroy(){
          this.config = null;
          //clean up the database connection here
}

First of all this is not correct:
<filter-mapper>
         <filter-name>authFilter</filter-name>
         <url-pattern>/Controller</url-pattern>
</filter-mapper>It is:
<filter-mapping>
         <filter-name>authFilter</filter-name>
         <url-pattern>/Controller</url-pattern>
</filter-mapping>
Also note that with this mapping configured onlt Servlets/JSPs called using the URL <your_domain>/<your_context>/Controller will be called.
Any other urls will not be subject to the filter.
I don't know all there is to know about filters, but I would be concerned that maybe your connection object is not thread safe being defined in the scope that it is.

Publish action not working with JCA based Business Service

Hi All,
I have created one BS in OSB that publish the message in AQ. Its working fine as expected when tested from test console.
I have made one proxy service which after transformation will publish the message to this BS, but the publish action is not invoking.
I have added log action inside request action of my publish action and log is getting generated for that with correct request.However, I cant see message in DB neither can i see any exception/error logs in OSB.
I tried replacing publish with route action and its working fine , message is getting published in AQ.Did any one face this type of issue before ???
Or publish action works only with jms based Business services.
Appreciate your help.
Regards,
Karan

Bingo !!!
Setting QOS helped me to find out the exact error. Was passing complete soap envelope to BS instead of passing body part only.
Thanks a lot for your help mate .
One more query can you please enlighten me on the use of QOS in OSB, such as in what scenarios we should use QOS.
Regards,
Karan
Edited by: Karan Mann on Mar 14, 2013 3:37 AM

I want to download firefox 4.0 but can only get 5.0 which will not work with my corporate firewall. How can I download FF4.0?

I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?

#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files

Problems with Zone based Firewall and mtr (mytraceroute)

We are using ZFW on an ASR1001 and have experienced a problem: when I try to use mtr (mytraceroute, see
http://en.wikipedia.org/wiki/MTR_%28software%29), I am getting packetloss on all hops between the source and the destination. e.g.:
<code>
                                                                                                                   Packets               Pings
Host                                                                                                            Loss%   Snt   Last   Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de                                                                                    100.0     8    0.0   0.0   0.0   0.0   0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net                                                                        100.0     7    0.0   0.0   0.0   0.0   0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net                                                                       100.0     7    0.0   0.0   0.0   0.0   0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net                                                                             100.0     7    0.0   0.0   0.0   0.0   0.0
5. Mannheim1-10GE-3-0-0.belwue.net                                                                              100.0     7    0.0   0.0   0.0   0.0   0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net                                                                    100.0     7    0.0   0.0   0.0   0.0   0.0
7. de-cix20.net.google.com                                                                                      100.0     7    0.0   0.0   0.0   0.0   0.0
8. 72.14.238.230                                                                                                100.0     7    0.0   0.0   0.0   0.0   0.0
9. 72.14.239.62                                                                                                 100.0     7    0.0   0.0   0.0   0.0   0.0
10. 209.85.242.187                                                                                               100.0     7    0.0   0.0   0.0   0.0   0.0
11. ???
12. ???
13. ???
14. bk-in-f94.1e100.net                                                                                           0.0%     7   20.0 20.6 20.0 21.2   0.4
</code>
So it seems that the Firewall on my asr1001 is throwing away all packets with ttl-exceeded coming back from hops in between, they have another destination address.
At the moment I am inspecting all kind of traffic from my network outgoing:
ip access-list extended 101
permit ip any any
class-map type inspect match-all cmap1
match access-group name 101
policy-map type inspect pmap1
class type inspect cmap1
inspect
etc... (zones, zone-pair in-out with policies applied)
So I tried to let pass all icmp-traffic from the outside to my network:
class-map type inspect match-all cmap_icmp
match protocol icmp
policy-map type inspect pmap2
class type inspect cmap_icmp
pass
etc... (zones, zone-pair out-in with policies applied)
So this has no effect, but I tested and I could figure out, that when I pass all icmp-traffic from my network to the outside, THEN mtr does work.
BUT then normal ping does not work anymore, because it will not be inspected any more.
But I want to have a secure Firewall with inspecting echo-replys and working mtr anyway.
Has anyone the same problem or can even solve this issue?
Thanks in advance,
Stefan

Hi Andrew, thanks for Your answer...
So I have now:
class-map type inspect match-any cmap_icmp
match access-group name icmp_types
ip access-list extended icmp_types
permit icmp any any ttl-exceeded
PMAP IN--> OUT
(don't be confused, my "vlanxxx_pmap_in" is the pmap FROM my network TO the outside...)
policy-map type inspect vlan664_pmap_in
class type inspect vlan664_cmap_in   (this is an extended ACL "permit ip x.x.x.x any")
inspect
class type inspect ipsec_cmap_in (this is because I have problems with VPN when inspected, another problem...)
pass log
class class-default
drop log
PMAP OUT-->IN
policy-map type inspect vlan664_pmap_out
class type inspect cmap_icmp (here comes the "ttl-exceeded"-ACL)
pass log
class type inspect vlan664_cmap_out (some open ports for some clients)
inspect
class type inspect ipsec_cmap_out (same problem with VPN when inspected)
pass log
class class-default
drop log
But unfortunately, the same problem occurs. Curiously, the first two packets seem to go "through" the firewall, but with 3rd packet the packetloss comes up:
                                                Packets               Pings
Host                                         Loss%   Snt   Last   Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de                 50.0%     3    0.3   0.3   0.3   0.3   0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net     50.0%     3    0.9   0.9   0.9   0.9   0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net     0.0%     2    2.7   2.7   2.7   2.7   0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net           0.0%     2    1.5   1.5   1.5   1.5   0.0
5. Mannheim1-10GE-3-0-0.belwue.net            0.0%     2    2.5   2.5   2.5   2.5   0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 0.0%     2    4.1   4.1   4.1   4.1   0.0
7. de-cix20.net.google.com                    0.0%     2    5.0   5.0   5.0   5.0   0.0
8. 72.14.238.44                               0.0%     2   39.2 39.2 39.2 39.2   0.0
9. 72.14.236.68                               0.0%     2    5.4   5.4   5.4   5.4   0.0
10. 209.85.254.118                             0.0%     2    5.4   5.4   5.4   5.4   0.0
11. ???
12. google-public-dns-a.google.com             0.0%     2    5.5   5.3   5.2   5.5   0.2
                                                 Packets               Pings
Host                                          Loss%   Snt   Last   Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de                  66.7%     4    0.3   0.3   0.3   0.3   0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net      66.7%     4    0.8   0.8   0.8   0.8   0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net     66.7%     4    2.1   2.1   2.1   2.1   0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net           66.7%     4    1.5   1.5   1.5   1.5   0.0
5. Mannheim1-10GE-3-0-0.belwue.net            66.7%     4    2.6   2.6   2.6   2.6   0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 66.7%     4    4.2   4.2   4.2   4.2   0.0
7. de-cix20.net.google.com                    66.7%     4    5.3   5.3   5.3   5.3   0.0
8. 72.14.238.44                               66.7%     4   70.3 70.3 70.3 70.3   0.0
9. 72.14.239.60                               66.7%     4    5.8   5.8   5.8   5.8   0.0
10. 209.85.254.116                             66.7%     4    5.8   5.8   5.8   5.8   0.0
11. ???
12. google-public-dns-a.google.com              0.0%     4    6.3   5.7   5.2   6.3   0.5
In the sessions on the routers, I see only this entry:
         Session 206F66C (129.143.6.89:8)=>(8.8.8.8:0) icmp SIS_OPEN
Any other suggestions?

Java Web Start not working with Proxy

I have Java Web Start program not listening to proxy settings. It tries to access localhost using our proxy settings, but with no user name or password. I'm wondering if Java Web Start has proxy settings somewhere. I'm not sure since when we disable the proxy settings the program works without issue. Any thoughts?
Thanks

For instance Safari uses those System Proxy settings, Firefox uses it's own!
So Java is using it's own, now we're waiting for an expert to drop in!

Simple Web App NOT working with JBoss on IDEA IntelliJ

Hi Experts:
I am using TOMCAT_4.0.3 (bundled with JBOSS_3.0.0) and using IntelliJ-IDEA as my IDE environment.
On one of my machine I created a WEB-APP kithany.war. It was working fine on this machine.
Later when I copied this kithany.war to other machine and put under server/default/deploy directory and then ran Jboss on which I get following error - wonder why?
13:32:34,078 INFO [MainDeployer] Starting deployment of package: file:/C:/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/kithany.war/
13:32:34,156 INFO [EmbeddedCatalinaServiceSX] deploy, ctxPath=/kithany, warUrl=file:/C:/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/kithany.war/
13:32:34,281 ERROR [MainDeployer] could not start deployment: file:/C:/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/kithany.war/
org.jboss.deployment.DeploymentException: Error during deploy; - nested throwable: (java.lang.NullPointerException)
at org.jboss.web.AbstractWebContainer.start(AbstractWebContainer.java:309) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:678)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:513)
java.lang.NullPointerException
at org.jboss.web.catalina.EmbeddedCatalinaServiceSX.createWebContext(EmbeddedCatalinaServiceSX.java:321)
at org.jboss.web.catalina.EmbeddedCatalinaServiceSX.performDeploy(EmbeddedCatalinaServiceSX.java:238)
at org.jboss.web.AbstractWebContainer.start(AbstractWebContainer.java:300)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:678)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:513)
13:32:34,281 ERROR [URLDeploymentScanner] Failed to deploy: org.jboss.deployment.scanner.URLDeploymentScanner$DeployedURL@6417805a{ url=file:/C:/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/kithany.war/, deployedLastModified=0 }
org.jboss.deployment.DeploymentException: Error during deploy; - nested throwable: (java.lang.NullPointerException)
at org.jboss.web.AbstractWebContainer.start(AbstractWebContainer.java:309)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:678)
WHat is wrong on this...? Any related information on above is appreciated.
THANKS!

Hello, manojkithany!
Did you find out what was wrong? I am experiencing this problem with the jboss http-invoker.sar and the jmx-console.war...
Both machines have the same environment. I found this exception with jobss3.04-tomcat bundle as well as with jobss3.06-tomcat bundle.
~~~snip
2003-04-01 17:10:04,122 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying http-invoker.sar
2003-04-01 17:10:04,122 DEBUG [org.jboss.deployment.MainDeployer] Begin deployment start file:/home/tmt/kroh/jcom/app/jcom/dep
loy/http-invoker.sar/
2003-04-01 17:10:04,122 DEBUG [org.jboss.deployment.MainDeployer] Begin deployment start file:/home/tmt/kroh/jcom/app/jcom/dep
loy/http-invoker.sar/invoker.war/
2003-04-01 17:10:04,125 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] webContext: null
2003-04-01 17:10:04,125 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] warURL: file:/home/tmt/kroh/jcom/app/jcom/dep
loy/http-invoker.sar/invoker.war/
2003-04-01 17:10:04,125 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] webAppParser: org.jboss.web.AbstractWebContai
ner$DescriptorParser@1c8efd1
2003-04-01 17:10:04,173 INFO [org.jboss.web.catalina.EmbeddedCatalinaService41] deploy, ctxPath=/invoker, warUrl=file:/home/t
mt/kroh/jcom/app/jcom/deploy/http-invoker.sar/invoker.war/
2003-04-01 17:10:04,220 DEBUG [org.apache.commons.digester.Digester] register('-//Sun Microsystems, Inc.//DTD JSP Tag Library
1.1//EN', 'jar:file:/home/tmt/kroh/www/jboss-3.0.6_tomcat-4.1.18/tomcat-4.1.x/common/lib/servlet.jar!/javax/servlet/jsp/resour
ces/web-jsptaglibrary_1_1.dtd'
2003-04-01 17:10:04,221 DEBUG [org.apache.commons.digester.Digester] register('-//Sun Microsystems, Inc.//DTD JSP Tag Library
1.2//EN', 'jar:file:/home/tmt/kroh/www/jboss-3.0.6_tomcat-4.1.18/tomcat-4.1.x/common/lib/servlet.jar!/javax/servlet/jsp/resour
ces/web-jsptaglibrary_1_2.dtd'
2003-04-01 17:10:04,224 DEBUG [org.apache.commons.digester.Digester] addRuleSet() with no namespace URI
2003-04-01 17:10:04,224 DEBUG [org.apache.commons.digester.Digester] register('-//Sun Microsystems, Inc.//DTD Web Application
2.2//EN', 'jar:file:/home/tmt/kroh/www/jboss-3.0.6_tomcat-4.1.18/tomcat-4.1.x/common/lib/servlet.jar!/javax/servlet/resources/
web-app_2_2.dtd'
2003-04-01 17:10:04,225 DEBUG [org.apache.commons.digester.Digester] register('-//Sun Microsystems, Inc.//DTD Web Application
2.3//EN', 'jar:file:/home/tmt/kroh/www/jboss-3.0.6_tomcat-4.1.18/tomcat-4.1.x/common/lib/servlet.jar!/javax/servlet/resources/
web-app_2_3.dtd'
2003-04-01 17:10:04,236 DEBUG [org.apache.commons.digester.Digester] addRuleSet() with no namespace URI
2003-04-01 17:10:04,242 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] AbstractWebContainer.parseWebAppDescriptors,
Begin
2003-04-01 17:10:04,243 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] Creating ENC using ClassLoader: java.net.Fact
oryURLClassLoader@df0438
### concatenation, always the same ###
2003-04-01 11:09:07,737 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] ..org.jboss.mx.loading.UnifiedClassLoader3@15
db13f{ url=file:/home/tmt/kroh/jcom/app/jcom/deploy/http-invoker.sar/invoker.war/ }
2003-04-01 11:09:07,737 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] ..java.net.URLClassLoader@6e1408
2003-04-01 11:09:07,737 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] ..sun.misc.Launcher$AppClassLoader@7a78d3
2003-04-01 11:09:07,737 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] ..sun.misc.Launcher$ExtClassLoader@929206
2003-04-01 11:09:07,738 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] Linked java:comp/UserTransaction to JNDI name
: UserTransaction
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] addEnvEntries
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] linkResourceEnvRefs
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] linkResourceRefs
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] linkEjbRefs
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] linkEjbLocalRefs
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] linkSecurityDomain
2003-04-01 11:09:07,739 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] Linking security/securityMgr to JNDI name: ja
va:/jaas/http-invoker
2003-04-01 11:09:07,741 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaService41] AbstractWebContainer.parseWebAppDescriptors,
End
##### remark: from here it starts to deviate from normal behavior ####
2003-04-01 11:09:07,744 DEBUG [org.jboss.util.NestedThrowable] org.jboss.util.NestedThrowable.parentTraceEnabled=true
2003-04-01 11:09:07,746 DEBUG [org.jboss.util.NestedThrowable] org.jboss.util.NestedThrowable.nestedTraceEnabled=false
2003-04-01 11:09:07,746 DEBUG [org.jboss.util.NestedThrowable] org.jboss.util.NestedThrowable.detectDuplicateNesting=true
2003-04-01 11:09:07,751 ERROR [org.jboss.deployment.scanner.URLDeploymentScanner] Failed to deploy: org.jboss.deployment.scann
er.URLDeploymentScanner$DeployedURL@ba617c43{ url=file:/home/tmt/kroh/jcom/app/jcom/deploy/http-invoker.sar/, deployedLastModi
fied=0 }
org.jboss.deployment.DeploymentException: Error during deploy; - nested throwable: (java.lang.NullPointerException)
at org.jboss.web.AbstractWebContainer.start(AbstractWebContainer.java:309)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:807)
~~~snap
Olaf

Opening a specific page of a PDF through web browser not working with IE5.5

Hi,
I need an urgent help to reslove the problem below.
Using Netscape 4.7, When I am trying to open a specific page of
a PDF file through the web browser using the command below.
web.show_document('http://oraweb/abc.pdf#page=3','_self');
This opens the page 3 and then when I give subsequent calls to
this command with different page nunbers, it opens the related
pages correctly.
But when using IE 5.5, the page gets displayed correctly for
only the firt time. Any calls to the command does not change the
page at all.
Could anybody help me to resolve this problem ASAP?
Thanks
Preji

Hello,
I think this is a problem of IE5.5 with PDF-Files.
You can find more information at acrobat web site
(perhaps there is a patch)
There is a setting in the reader where you can say that
the reader should start in the web-browser. Turn it off -
when IE starts downloading a pdf-file you can choose
acrobat reader for the first time.

"Save for Web" does not work with mac OS 10.6

Everything else runs fine with PSE 6 and OS 10.6, but nothing (!) happens when choosing "Save for Web" (German Version).

Here are the directions for PSE 6 in general:
http://forums.adobe.com/thread/422596?tstart=30
and for save for web:
Finally, to make the Save For Web work, you must do the same thing as above (which is make a folder owner be a non-admin account, and fix the read/write so that in 10.4 the You can says Read & Write). The folder to change with the "command i" get info is :
/Library/Applications Support/Adobe/Photoshop Elements/File Agent/6.0/en_US.
Once this en_US file is owned by a non-admin account and the Read & Write is set, and the padlock is unlocked, the Save For Web works.

Why does Create PDF from Web Page not work with certain URLs?

I'm creating a large number of PDFs from Web Pages on Adobe Acrobat XI Pro and occasionally come across certain URLs that fail to generate a web page. The process begins as normal but eventually the status window lists a few errors or canceled processes and that there are now 0 Connections Active. This only occurs for certain URLs, but when it happens it consistently fails for that URL (as in trying it a few mroe times doesn't let it work). Is there any specific reason this happens or a way I can prevent it? The above example is of a URL that fails to generate a PDF :
http://www.pcmag.com/encyclopedia_term/0,1237,t=access+point&i=37393,00.asp

I tested this in Acrobat X and the exact same issue occurs
http://www.quantumdynamix.net/clients/image-map-test/ImageMapTest-AcrobatX.pdf
This has to be considered a legatimate bug, especially since IMAGE MAPS is listes as one of the supported HTML features via the help files

ISA 570 , HTTPS Web Filtering not work

We just replace the new ISA 570, we enable the Web URL Filtering and config the speific web site is block to access.
We confirm Security Services > Web URL Filtering > Advanced Settings 80 and 443 is on filtering.
We test the http 80 is block the speific website but the same web site use https can bypass the URL fultering and access success.
How come?

Hi, I think below two links, may be help for you
Refer to:
http://cdetsweb-prd.cisco.com/apps/dumpcr?identifier=CSCuf81910&parentprogram=QDDTS
http://www-tac.cisco.com/Teams/ks/c3/xmlkwery.php?srId=625197659
From: [email protected]
Subject: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
See detail note for email text
From: [email protected]
To: [email protected]
Cc: [email protected]
Subject: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
Hello Team,
I do have a ISA500 case open on our queue regarding HTTPS URL filtering and I remember one of you mentioning about the problem last week.
I was able to replicate the issue customer is experiencing with https://www.youtube.com.
Do you have any updates we can provide to our customers?
Thank you,
Marcelo
(1h) 2013-03-20 22:06 GMT+000 JTSAO : Email InChange Note Status Edit as New
From: [email protected]
Subject: RE: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
See detail note for email text
From: [email protected]
To: [email protected],[email protected]
Cc: [email protected]
Subject: RE: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
Hi Marcelo,
There is a limitation in our HTTPS support. ISA500 may already have certificate before you configure to allow https://www.youtube.com . You need to wait for the certificate to time out before it is allowed. If you still have it configured to allow. Please check again if it works now. I am able to block facebok with HTTPS.
Regards,
Jeff
From: Marcelo Demello (mamello)
Sent: Wednesday, March 20, 2013 1:14 PM
To: isa500-tiger-team(mailer list)
Cc: email-in(mailer list)
- Toggle view for this email - - Expand ALL emails -

Update prompt not working with version based download

Hello All,
I have a JWS application and it is deployed on my local server. I want my users to get the Update prompt ( There is an optional update, Do you download it ) when ever there is an update and I am using the version based download(version.xml) while updating my application(Jardiff). The problem here is when i change the version number from 1.1 to 1.2 in the jnlp on the server. (EX: <jar href="application.jar" version="1.2" main="true"/> ) . When the user starts the application from desktop shortcut the Jardiff gets downloaded and patched but there is no update prompt.
The problem here is the JNLP gets refreshed and even though i have the policy = "prompt-update" in update tag( <update check="timeout" policy="prompt-update"> ), i am not getting the update prompt. The update prompt works fine in basic download.
I am facing this problem from quite a long time. I hope some one has got an answer for this.
Thanks and regards,
Anjali

Hello Andrew,
Thanks for ur reply.
This is the JNLP file and version.xml, which i am using: ( I am using the JNLPDownloadServlet)
launch.jnlp:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE jnlp PUBLIC "-//Sun Microsystems, Inc//DTD JNLP Descriptor 6.0//EN">
<jnlp spec="6.0+" codebase="$$codebase" href="$$name">
<information>
        <title>Dummy Product </title>
        <vendor>Dummy Product</vendor>
     <icon kind="shortcut" href="images/image.gif"/>
     <icon kind="splash" href="images/splash.png"/>
        <homepage href="$$context"/>
        <description kind="one-line">Dummy Product</description>
        <offline-allowed/>
     <shortcut online="true">
          
          <desktop/>
          <menu submenu="Dummy -product"/>
     </shortcut>
</information>
<update check="background" policy="prompt-update"/>
   <security>
    <all-permissions/>
   </security>
   <resources>
        <java version="1.6+" />
     <java href="http://java.sun.com/products/autodl/javase" version="1.6+"/>
        <jar href="applicationV.jar" main="true" download="eager" version="1.1"/>
     <jar href="abc.jar" download="eager"/>
     <jar href="cab.jar" download="eager"/>
     <jar href="app.jar" download="eager"/>
     <jar href="app1.jar" download="eager"/>
     <jar href="app2.jar" download="eager"/>
     <nativelib href="app3.jar" download="eager"/>
   </resources>
   <application-desc main-class="Mainfile">
     <argument>arg1</argument>
     <argument>arg2</argument>
   </application-desc>
</jnlp>
version.xml:
<jnlp-versions>
         <resource>
             <pattern>
                <name>applicationV.jar</name>
                <version-id>1.1</version-id>
             </pattern>
             <file>application-01_00-us.jar</file>
         </resource>
     <resource>
              <pattern>
                <name>applicationV.jar</name>
                <version-id>1.2</version-id>
             </pattern>
             <file>application-02_00-us.jar</file>
         </resource>
</jnlp-versions>
         Thanks for the support.
Anjlai

CCP bug with with zone based firewall policies

Hello guys,
I'm facing a problem today right after creating some new rules.
When we are going to "Edit Firewall Policy" the Rule Flow Diagram is showing up. My problem is that i don't see anymore the button which let me disable it !!
You can see the screenshot.
So my questions are:
- Is there a way to disable this diagram ? (maybe with some java configuration)
- Is there a way to modify this display ?
I have the same problem on a Win7, Win8, Win2008 & Win2012. Tested with Java 1.6u11 to 1.7
Thanks for the help.

I tried taking the http inspection rules out and had the same problem.
debug messages :
000168: Feb 9 14:26:06.108 gmt: %FW-6-DROP_PKT: Dropping tcp session 195.74.103.133:33032 192.168.1.1:25 due to Out-Of-Order Segment with ip ident 0
000169: Feb 9 14:26:36.156 gmt: %FW-6-DROP_PKT: Dropping tcp session 173.194.41.130:80 192.168.1.11:53846 due to Out-Of-Order Segment with ip ident 0
000170: Feb 9 14:27:06.459 gmt: %FW-6-DROP_PKT: Dropping tcp session 195.74.103.133:33032 192.168.1.1:25 due to Out-Of-Order Segment with ip ident 0
000171: Feb 9 14:27:36.823 gmt: %FW-6-DROP_PKT: Dropping tcp session 173.194.41.131:80 192.168.1.11:53823 due to Out-Of-Order Segment with ip ident 0
000172: Feb 9 14:28:08.007 gmt: %FW-6-DROP_PKT: Dropping tcp session 173.194.41.130:80 192.168.1.11:53897 due to Out-Of-Order Segment with ip ident 0
000173: Feb 9 14:28:46.336 gmt: %FW-6-DROP_PKT: Dropping tcp session 61.206.117.4:56336 192.168.1.1:25 due to Retransmitted Segment with Invalid Flags with ip ident 0

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

Websense web filtering not working with 2911 with zone based firewall

Similar Messages

Maybe you are looking for