Webservice,SOAP tools

Hi Experts,
I have developed a scenario from file to webservice(3rd party) and when I go and see in SXMB_MONI I could see a success flag and could see data succesfully updated but I am unable to see the data in the 3rd party system.Can you tell me how to check if the webservices I have called are successful using SOAP tools,which tool to use and how to use them.
Thanks

Hello,
If you want to test the thirdparty services independantly then there are lot of client tools like SOAP UI, XML Spy, etc... I used only SOAP UI, it's easy to use. You can download them from [http://Soapui.org]
You checked only in SXMB_MONI. Also check in the adapter monitoring and check for the status of the SOAP Receiver channels.
raj.

Similar Messages

File(PDF as attachment)-- XI-- WebService(SOAP with attachment)

Hi i have following Scenerio in my hand,
File>XI>WebService(SOAP)
Kindly help me in implementing the Following Scenerio;
I need to attach PDF to File Adapter as PayLoad or give it to File Adapter as Attachment which in turn send this data to XI and then XI wud generate WebService having this PDF as attachment.
Kindly Walk me thru all the steps during Configuration and design and do guide me how to test wether this scenerio works or not.
Also tell me abt the WebService i need to use to test the Scenerio.
Thanks.

Hi Jeet,
If you want your file adapter to read contents from a PDF file, check out the folloing blog,
<a href="/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter">Sender File Adapter with PDF</a>
If you want your file adapter to generate its output into a PDF file, then check the following blog,
<a href="/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter">Receiver File Adapter With PDF</a>
Sriram's blog on FILE to HTTP scenario might of be help to you too. It also deals with Syn / Async Bridge which can be ignored.
<a href="/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi">File to HTTP</a>
Do let us know if you need any further help,
regards,
Bhavesh

R3 (rfc-sender) - XI - Webservice ( soap-receiver)

Hi,
I am getting below error whenever webservice(target system) is unavailable.
HTTP 404 Not Found
Then RFC got failed in R3, due to this error in XI
R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice.
I am getting this error to my mail box as i have configured ALERTS. i do not want to change existing RFC.
is there any chance to send response to R3 even webservice is down, please can any one suggest.
Thanks,
SIva
Edited by: Siva Grandhi on Jun 18, 2008 1:12 PM

Hi siva,
check this blog on HTTP errors.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
May be the URL you have given in SOAP at receiver adapter is wrong.Check that once.
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Thanks,
Vijaya.

R3 (rfc-sender) - XI - Webservice ( soap-recever) Synch : error handlng

R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice down.
Pleae help me out on this.
Thanks,
Dhanush.

Hi,
Normally, the Web service should provide a fault message back to XI and the RFC should also have an exception defined that will trigger a fault message mapping and that way the application error is sent back to R3.
But if the web service does not provide u with a fault message then XI will trigger the System Error back to R3.
The functionality of checking the DB status and propagating meaningful errors to XI as fault messages should lie with the web service.
Thanks
Vikranth

WebService SOAP vs J2EE

Hi,
late but hopefully not to late i do my first steps into the world of webservices.
Since we use JDEV 9.0.4 in prodution i started with this version of JDEV.
There it is possible to generate two kind of Webservices, soap and j2ee.
In version 10.1.3 there is only one left.
May someone could explain the reason to me please (and perhaps the differences)?
Thanks and regards,
Chris

In 10.1.3 we use the standard J2EE way of working with Web Services (JAX-RPC) in older versions of JDeveloper we also supported an Oracle specific way - which was there before the industry standard appeared.

Cannot able to locate Syndicate operation in MDM Webservice generator tool

HI,
     I am trying to generate MDM webservice through MDM Webservice generator tool. I am following the steps provided on the sap help.
While running the MDM WebService generator, I cannot able to locate "Syndicate operation" while I am on Configure table step. Rest other operations like CRUD,Matching,checkout etc are present.
On the below link it was cleary mentioned that we can perform syndicate operation too.
       http://help.sap.com/saphelp_nwmdm71/helpdata/en/45/0005ae3be30485e10000000a155369/content.htm
Kindly, let me know what is wrong?
Regardsm
Pratik

Hi Pratik,
Can you validate these things :
The operation fails if:
One of the input parameters, port, remoteSystem, or recordIdentification is missing.
The remoteSystem parameter is invalid because MDM has no remote system with specified code or name.
●      The syndication port is invalid for any of the following reasons:
         Port Code was not defined in the MDM Console
         Port Type is not specified as Outbound
         Processing Type of port is not specified as Manual
         There is no map assigned to the specified port
         The port is not paired with a specified remote system
The recordIdentification parameter is invalid because a valid MDM record cannot be found by one of the record Id criteria.
   RepositoryInformation is invalid
If the Web service operation timeout has expired before the MDM syndication process (running on the MDS and MDSS) was completed.
It may help.
Deep

WebServices-SOAP interoperability

Hello All,
I need to develop a Java-system (client-side) that communicates over WebServices/SOAP with SAP (server-side).
Therefore, I am looking for using either Apache-Axis of Metro-WebServices to access the SAP system.
Therefore, I would like to know if there is somewhere an interoperability matrix identifying the frameworks that could function as WebServices clients or with which frameworks others have been successful?
regards, Harrie

Hi,
Thanks for the answer.
While using Axis1 I had problems with the namespace that SAP generates for its generated WSDL.
Axis 2 I tried, but failed on the client interface somewhere (not a SAP interoperability issue).
In the end I took Apache CXF and that works for me now.
Harrie

XI SOAP adapter vs webservice testing tools

Actually I have creted simple xslt mapping and managed to come up with exactly in the format of endpoint request format of the webservice.
here is the payload( I have created the SOAP Envelop, Header and body in the payload)
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:eb="http://www.ebxml.org/namespaces/messageHeader" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Header>
    <eb:MessageHeader SOAP-ENV:mustUnderstand="1" eb:version="1.0">
      <eb:ConversationId>sucesss</eb:ConversationId>
      <eb:From>
        <eb:PartyId type="urn:x12.org:IO5:01">applevac.com</eb:PartyId>
      </eb:From>
      <eb:To>
        <eb:PartyId type="urn:x12.org:IO5:01">webservices.sabre.com</eb:PartyId>
      </eb:To>
      <eb:CPAId>P4XC</eb:CPAId>
      <eb:Service eb:type="sabreXML">session</eb:Service>
      <eb:Action>SessionCreateRQ</eb:Action>
      <eb:MessageData>
        <eb:MessageId>mid:[email protected]</eb:MessageId>
        <eb:Timestamp>2001-02-15T11:15:12Z</eb:Timestamp>
        <eb:TimeToLive>2001-02-15T11:15:12Z</eb:TimeToLive>
      </eb:MessageData>
    </eb:MessageHeader>
    <wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/12/secext" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/12/utility">
      <wsse:UsernameToken>
        <wsse:Username>5555</wsse:Username>
        <wsse:Password>password</wsse:Password>
        <Organization>L5x5</Organization>
        <Domain>DEFAULT</Domain>
      </wsse:UsernameToken>
    </wsse:Security>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
    <eb:Manifest SOAP-ENV:mustUnderstand="1" eb:version="1.0">
      <SessionCreateRQ>
        <POS>
          <Source PseudoCityCode="P4XC"/>
        </POS>
      </SessionCreateRQ>
    </eb:Manifest>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I want XI to post just the payload and nothing else so....
I selected Do not use envelope in the adapter configuration because we have every thing( SOAP envelop, header and body in the payload) but it is not working as i am still getting the same error message before implementing this xslt.
Error Message:
<StackTrace>com.sabre.universalservices.base.session.SessionException: errors.session.USG_CONVERSATION_ID_REQUIRED at com.sabre.universalservices.gateway.control.SecurityInterceptor.executeOnRequest(SecurityInterceptor.java:116) at com.sabre.universalservices.base.interceptor.Interceptor.execute(Interceptor.java:113) at com.sabre.universalservices.base.interceptor.InterceptorChain.applyInterceptors(InterceptorChain.java:32) at com.sabre.universalservices.base.interceptor.InterceptorManager.process(InterceptorManager.java:121) at com.sabre.universalservices.gateway.control.WSGateway.onMessage(WSGateway.java:415) at com.sabre.universalservices.gateway.control.WSGateway.handleRequest(WSGateway.java:313) at com.sabre.universalservices.gateway.control.WSGateway.doPost(WSGateway.java:247) at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter
Do you have any idea like XI will add anything to this pay load when it sends out to the webservice?
If i take the payload from the XI and try it in SOAPUI(tool to test webservice, you would know it already ) it works fine, I mean I was able to get the proper response but in XI it does not work.
Any help in this regards is highly appreciated.
we are using PI 7.0 and SP 9.
Message was edited by:
        Venkat Marni
Message was edited by:
        Venkat Marni

Hi,
Finally I could solve the problem.
I was actually trying to post the information from the http client at the sender and receiver side I am getting the error.
Later i have actually created the webservice for my sender interface in XI then post the info using the SOAPUI(3rd party tool) to post the info to XI and then Xi will communicate the webservice using SOAP adapter then I got the proper response from the webservice.
In this whole episode I guess there is some thing wrong in using a htp client but technically we should be able to use http client as XI will take the payload and use xslt mapping to come up with target interface soap message( but i do not know why XI failed in that).
thanks for all your help and hope this is clear.
thanks,
Venkat

SOAP Webservics Monitoring Tools

Hi,
Can somebody please suggest me what are the good tools around to monitor java webservices. To monitor every layer of web services such as transport, security, request & response times, error stacks etc. Atleast most of the layers.
Thanks,
Pradeep

Thats what i thought, but i got the following Info on my logs, when i started up tomcat. I can access my current services on it, but AmberPoint cant see them. I suspect, its becuase I am running on Metro stack. As per AmberPoint specs, they work with Axis. Any other tool you can suggest?
Thanks again.
01/04/2010 6:14:25 PM com.amberpoint.products.deved.model.KomContainerFactory create
INFO: Creating a Container from KomContainerInfo = {ServerInfo=[Tomcat: Apache Tomcat/6.0.24] rootUrl=[http://localhost:8080/] rootDirectory=[C:\LocalDev\apache-tomcat-6.0.24\webapps\apexpress\]}
01/04/2010 6:14:25 PM com.amberpoint.products.deved.ui.model.ModelLoader$ModelCreationThread doCreate
INFO: Initialized container TomcatAxisContainer{name=[TomcatAxisContainer]}
Deployments:
Web Services and OperationsTomcatAxisContainer{name=[TomcatAxisContainer]}
01/04/2010 6:14:25 PM com.amberpoint.products.deved.ui.model.ModelLoader$ModelCreationThread doCreate
WARNING: No Web Services were found in this container!

Webservice (SOAP) in ABAP

Hi,
i would like to implelemt a Webservice in ABAP which receives SOAP messages the sends back the response. ANy link on how to start is appreciated.
Right now, i do not have an idea where to start (SM59?, SICF?).
//Rainer

The help files have pretty good steps as far as the implementation procedures. The SOA forum is a better place for web service questions. Once we upgraded 2 years ago, I was able to read the help files and fill in the gaps with the forum to get started but post back if you have additional questions.
Basically, for design-time, start with a new package and function group, then develop the functions (RFC-enabled), then use the wizard from SE80 to generate the web service. Finish off the runtime defintion by checking/configuring the endpoint binding in SOAMANAGER (NW 7.0 SP14 or above).
Also, you can use WSNavigator from SOAManager for testing purposes but only if you have the Java stack implemented. Otherwise, download and use SOAPUI for external testing - it's a great tool.
Edited by: Brad Bohn on Nov 22, 2010 10:17 AM

Problem Consuming webservice -- SOAP UI

Hello Gurus,
We have generated a web service from SAP and trying to consume the web service from SOAP UI (external tool), but the SOAP UI tool is generating some error as mentioned below.
Exception_Name> CX_ST_MATCH_ELEMENT
Exception_Text> System expected end of element 'GetQueryViewData': Main Program:/1BCDWB/WSS0051118152402496573| Program:/1BCDWB/WSS0051118152402496573| Line: 58| Valid:X
Note: I have tested the web service from the WS Navigator and I am able to get the response (all Ok).
Kindly let me how I can fix the issue, I belief the problem is XML transformation related (XSLT_TOOL).
Regards,
Abhi.

Hi Abhi,
seems that in SOAPUI, you need to pass the correct data (exact length of SAP Fields). Also try by removing "?" symbols whereever not necessary to pass data(optional values).
Hope this may help you...
Cheers,
Kris

Sending Acknowledgement back to webservice SOAP to File Scenario

I need to receive information from a webservice to a file for which I have configured Sender SOAP Adapter and file adapter to generate file.
Now I need to send and acknowldegment to
webservice back if File is generated successfully..How do I do it ?
Points will be awarded

thanks..
but I am not getting error when I tru to send request thru altovaxml spy iget following error in response
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                          <context>XIAdapter</context>
                         <code>ADAPTER.JAVA_EXCEPTION</code>
                         <text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: www.w3schools.com
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:133)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:855)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
     </SOAP:Body>
</SOAP:Envelope>

WebService/SOAP Adapter

Currently we have some customers who send us a file through the HTTP. It is now a requirement that they send us the same file through a webservice.
A. Is it possible to Attach an XML file through a webservice?
B. Where do I or How do I develop such a webservice for them to access and upload the file.... Can I develop a webservice in XI itself and then if I give the customer some criteria then they can access this webservice?

Hi,
>>>>A: How do I use that attachment in XI? If I want to use the data in that attachment will I have to drop that file to a directoty somewhere womehow and then resend the attachment through a File adapter...
no you can put it directly inside XI flow try my blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
or you can write your own to get the file
>>>>B: With regards to my webservice on XI... Can I develop the webservice on XI including a functionality to upload a file and then all I have to do for my customer is give them the WSDL and they will be able to access my webservice?
yes you do everything on XI
>>>>C: Will the customer need a specific application to access the WSDL
no WSDL is a file, customer can access it with his development tool
Regards,
michal

Microsoft SQL 2005 WebServices - SOAP Result Parsing

Hello,
I have successfully connected to, sent a request and
retrieved a SOAP response from, the WebServices functionality
(ENDPOINT) using MS-SQL 2005. What I need to know how to do is
parse the SOAP response in FLEX as to access the actual data for
use in the application.
How do I extract only the node that contains the data and
then use this for binding my controls? I don't need any of the SOAP
header stuff in there. Of course I could loop through the
xyz.lastResult and parse onyl the parts I need to a new XML object,
but that seems a lot of processing for something that is almost
there.
Any help would be appreciated.
Sal

quote:
Originally posted by:
TN_SGIA
Hello,
I have successfully connected to, sent a request and
retrieved a SOAP response from, the WebServices functionality
(ENDPOINT) using MS-SQL 2005. What I need to know how to do is
parse the SOAP response in FLEX as to access the actual data for
use in the application.
Can you share the code to do that with me? I'm not good a
SOAP requests, and this would be an excelent contribution to my
project. Thank you.

WebService SOAP response problems

hey,
I'm developing a WebService, using EJB's. I have a session bean, which has several methods. One of them returns, say, a class like follows:
class TeamDTO implements Serializable {
private String name;
private Integer teamId;
//getters and setters ..
I have several such methods returning various, very similar, classes. Now the problem is, when I try to test my application in the Web Services Navigator the response NEVER contains all the fields I wish. Why is that? Example of a response:
<SOAP-ENV:Envelope ...>
<SOAP-ENV:Body>
<rpl:getAllTeamsResponse ... >
   <rpl:Response ...>
    <pns:TeamDTO>
     <pns:name>team0</pns:name>
    </pns:TeamDTO>
   </rpl:Response>
</rpl:getAllTeamsResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
But the TeamDTO class has apart from a name field an teamId field as well. What happened?! The same happens to other classes, but there's no rule about the missing column (first I thought it's the PK, like in the above example, but that's not the case).
What am I doing wrong? Ah, the fields are definetely not null, since in the above case it's a PK.
regards,
Kornel

Hey,
thanks for your hint, but that's not the problem here - for the example I've posted above java.lang.Integer won't appear, and for another case java.lang.String (whereas in my example String appeared). I'm sure the problem is somewhere else.. What happens if the field is null, will the appropriate tag appear in the soap response?
regards,
Kornel

Webservice,SOAP tools

Similar Messages

Maybe you are looking for