Website and SAP SD

I am new to SD. We have this company website that handles the Sales Transaction. The company is about to use SAP R/3 (without SAP CRM). I have few questions about IDOC. As far as I know, IDOC can record the sales order from internet going to SAP. My questions are:
1. Can the IDOC send notice back to the website that SAP has placed the order and it has order number already? Can it send the new SO number going to the website?
2. If the company makes an delivery order for a certain customer, can IDOC "automatically" send the DO number to the website?
3. Same thing with DR and billing, can it send these DR# and billing# when these tasks took place?
4. Can IDOC talk to the website and SAP R/3 (back and forth) during the entire duration of Sales Cycle?
5. Can this be done by ABAP person?
thanks for the advice.

Hi Anwar ,
01. Yes.
02.. Yes,
03.. Yes,
04. What do you mean by talk ?
05.  Yes. Both Functional and Technical ( ABAP ) can configure .
IDoc, short for Intermediate Document, is a SAP document format for transferring the data for a business transaction.
IDoc is similar to XML in purpose, but differs in syntax. Both serve the purpose of data exchange and automation in computer systems, but IDocs go further.
While XML allows having some metadata about the document itself, an IDocs is obligated to have information at its header like its creator, creation time etc. While XML has a tag-like tree structure containing data and meta-data, IDocs use a table with the data and meta-data. IDocs also have a session that explains all the processes which the document passed or will pass, allowing one to debug and trace the status of the document.
Different IDoc types are available to handle different types of messages. For example, the IDoc format ORDERS01 may be used for both purchase orders and order confirmations
Please refer following link for further detaisl :--
Data Exchange via IDoc with ALE or EDI [original link is broken]
http://wiki.sdn.sap.com/wiki/display/ABAP/Idocs
Thanks /Rajesh

Similar Messages

  • Interface between company website and SAP- Very Urgent please!!!!!!!!!!!

    Hi all,
    Did anyone come across such thing. what is the interface technology used to interface a third party software and SAP in case of Recruitment.
    Regards,
    Uday
    Message was edited by:
            Bharat

    Hi,
    To my feeling, all depends on how you can provide/retrieve frm that third party.
    Solutions like XI (https://www.sdn.sap.com/irj/sdn/xi), web services, etc can be valueble for your purpose, but only you can determin this by knowing the third party software.
    Eddy
    PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

  • How to retrieve the data from Website and Upload it in SAP table?

    Dear ABAPers,
            I want to retrieve the data from website and upload the same in SAP Database Table is that possible.Please help me.It is very Urgent.
    Thanks & Regards,
    Ashok.

    Dear Abhishek,
                  Thanks for your reply.But my requirement is not met.
    If i execute the program it should retrieve the data from particular website.
    Thanks & Regards,
    Ashok.

  • Send data to Integrate Website using SAP PI

    Dear All
    How to upload data to website using SAP PI.
    will it be a SAP to HTTP scenario or SAP to SOAP scenario?
    What are the prerequisties fot implementing this scenario?
    Thanks and Regard
    Satish

    >
    satish raj wrote:
    > Dear All
    > How to upload data to website using SAP PI.
    > will it be a SAP to HTTP scenario or SAP to SOAP scenario?
    >
    > What are the prerequisties fot implementing this scenario?
    >
    > Thanks and Regard
    > Satish
    it can be either a SOAP or a HTTP scenario
    if the website uses the normal Post and Get then use HTTP else if they have a Webservice to communicate go for SOAP. in any case if you use the SOAP (receiver) adapter with the option Do not use SOAP envelop it actually simulates the HTTP receiver adapter

  • Course material for SAP TERP10 and SAP FICO

    please provide some study material and some guidance for certification exam of SAP TERP10 and SAP FICO as i am planning to sit for my certification exams

    Hello there!
    I found a cool website, that specialized in FICO:
    http://fico-forum.de/zertifizierung/zertifizierung.php
    if you cant read in German, I can advice you to use Google Translator

  • Ports to open to enable connection between TVN staged env and SAP

    Hi,
    What the ports to be opened to enable connection between SAP TVN stage environment and SAP ECC...

    Hi Abi,
    I have implemented STVN products in 10 or 11 clients and have never had to do this. The SAP .NET connector (or SAP JCo for Java version) handles the connection between the STVN apps and the SAP system and no port is usually opened. The default port for the application, if you have not changed the IIS website, will be port 80.
    I hope that helps.
    Kind regards,
    Luke

  • What is difference between SAP R3 And SAP IS Mills Product

    HI Friends
    What is difference between SAP R3 And SAP IS Mills Product
    What are the futures are availables in IS MIlls
    Regards

    Hi,
    SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
    Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
    The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
    These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
    To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle – from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
    Prase

  • Using ale u can send from sap to sap and sap to non sap systems

    hi,
    using ale u can send from sap to sap and sap to non sap systems,
    then what is diff b/w ALE and EDI

    Hello KALYAN KUMAR,
    Application Link Enabling (ALE)
    1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
    2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
    3.ALE enables the integration of business processes across several SAP or non-SAP systems.
    Electronic Data Interchange (EDI)
    1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
    2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
    3. This enables communication with non-SAP systems.
        By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
    I hope u understands the difference:)

  • I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

    I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
    In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
    <B>DESCRIPTIONS</B>:
    This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
    <B>INSTRUCTIONS</B>:
    1. Run the VI.
    2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
    <B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
    3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
    4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
    <B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
    1. SVL Scale Voltage to EU.vi
    2. OAT Digital Tacho Process.vi
    3. OAT Get Even Angle Reference.vi
    4. OAT Convert to Even Angle Signal.vi
    5. OAT Compensate Even Angle Signal.vi
    My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
    Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
    Solved!
    Go to Solution.

    Hi CracKatoA.
    Take a look at the link bellow:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
    Regards,
    Filipe Silva

  • How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

    Hi
    I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
    The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
    Does anybody know where this file went or can somebody tell me an alternative place to get this file?
    Jacob

    Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
    Hope that works!
    Elise

  • Get All images from a website and put them in a listbox.

    Hi Everyone, I am new to Java Programming.
    I wanted to know if there is a way to get all the images in a website and put them in a listbox. And if an item is clicked in list box, view it in a picturebox.

    Harsimran_Singh wrote:
    what is the whole idea about .Net vs. Java...guys, .NET users are so friendly and helpful, they don't even judge english
    This is not putting a good impression of Java Users on me.good luck with .net. im sorry that things didnt work out with java.
    unfortunately, .net is essentially a clone of java so you may find that you will be looking
    to learn exactly the same things but for an expensive propriety platform.
    if you change your mind, read:
    [swing tutorials|http://java.sun.com/docs/books/tutorial/uiswing/]
    jlist
    listcellrenderer
    [list tutorial|http://java.sun.com/docs/books/tutorial/uiswing/components/list.html]
    [advanced list programming|http://java.sun.com/products/jfc/tsc/tech_topics/jlist_1/jlist.html]
    on your way out thank the moderators : )

  • Updated to firefox 4.0. since then my computer is very slow accessing the internet, websites and getting information from within a website.

    Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
    Many times I have to exit Firefox and re-enter it later to access the internet.
    Please advice what I need to do to get back to the speed I had with the older version of Firefox.
    Thank You,
    Dennis

    Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
    Many times I have to exit Firefox and re-enter it later to access the internet.
    Please advice what I need to do to get back to the speed I had with the older version of Firefox.
    Thank You,
    Dennis

  • Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

    Hello ASUG Community.
    I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM.  The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
    The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
    The question I've been trying to design around is "where to store the SAP-MDM item number"?
    I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
    The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality?  It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s.  Or can this be done using the standard OCI functionality?
    I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
    Any insight would be most appreciated.
    Thanks.  Sincerely,
    Rich Wortmann

    I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
    Sorry not sure about the BADI to use.

  • I am trying to log onto a webinar. Their website says Adobe Flash Player is disabled. I have been on Adobe website and it has checked my computer, saying that my Flash Player is enabled. Where do I go now?

    I am trying to log onto a webinar. Their website says Adobe Flash Player is disabled. I have been on Adobe website and it has checked my computer, saying that my Flash Player is enabled. Where do I go now?

    Hi,
    Which OS and browser you are using and what is your flash player version? To check your flash player version visit Installation problems | Flash Player | Windows and click on check now button.
    Can you also please post a screenshot of the problem that you are facing using How to post a screenshot in the forum
    -Varun

  • Loading transaction data to CRM and SAP/R3 from legacy system

    Where can I find information about expected timing to load orders from a legacy system to CRM and SAP R/3? Does anyone know how long it would take to do the update in CRM using RFC's and BAPI's and then load to SAP/R3 if the order had an average of 3.2 line items per order and there were 50.7 million orders? It is assumed we would run multiple loads concurrently. So I guess a better question is how long does it normally take to load one order with 3.2 line items onto CRM and also SAP R/3?
    Any advise would be greatly appreciated. Thank you.

    Hi Qutubuddin,
    Can you please let me know how you achieved moving data from non sap system to r3 using webdynpro java?
    thanks
    sunil

Maybe you are looking for