Website logo needs to sit on top of backgropund image with no box

I am trying to create a logo with a transparnt background for my website, so my logo can sit on top of background images. I have created different file, png, gif, eps all with transparent backgrounds but everytime I upload it to my website builder (wix) it has either a grey or white background. Can someone advise on how I would ahcieve the correct file?

Jadelm,
Presuming you are referring to the large grey box, I agree with Gonzalogxg.
If you are referring to what appears to be a white fringe, it should only occur in GIF and only if you have a Matte colour different from the background, but not in PNG and EPS.

Similar Messages

  • How do I make text sit on top of an image without it disappearing.

    I am currently copying and pasting images with captions from quark express files to indesign cs6 files.
    Everytime I copy and paste these images the captions which are on top of the image disappear behind
    the image.  How do I put the text back on top of the image?  and in general how do you put text on top
    of an image without it disappearing?

    text.on.image.question wrote:
    I am currently copying and pasting images with captions from quark express files to indesign cs6 files.
    This is probably a really bad workflow that will end up biting you. I've not actually been able to copy a an image box from Quark and paste it into ID to test, so I don't know waht youare doing, exactly, but odds are you are not pasting a link to the image (doe sit show a link in ID's Links panel?). If not, you should be building this from scratch or opening the Quark file directly in ID (up to version 4 with out a plugin, later than that requires the Q2ID plugin from Markzware).

  • I need to replace a color on my image with a specific color from another part of the image.  How?!

    I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image.  So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is.  I need to use a specific color so this does not help me.  Does anyone know how to complete the task I am referring to?
    Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything.  So it's pretty old school...
    Any help/feedback is greatly appreciated!  Thank you.

    Hi brookehelene,
    You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
    I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
    (click on the screenshots below for larger views)
    1. Select>Color Range
       (i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
       (there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
    2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
       (in the screenshot below the white areas are selected and black areas are not)
       (your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
    3. After you press the okay in the color range dialog you'll see the selection (marching ants)
       At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
       to reveal a list and choose Solid Color.
       Then use the eyedropper to sample a color from your image and press ok.
       Change the Blend mode for the color fill layer to Color (top of the layers palette)
    4. As you can see a lot has been selected besides the flower.
        To refine the areas of color, paint on the layer mask with the paintbrush tool.
        Use white to add the color or black to subtract the color
        You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
        and press the X key to switch between the two when painting on the layer mask.
    Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
    To change the color you can double click on the color fill icon in the layers panel.
    You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do.

  • Can Edge Reflow handle type on top of background image within a box?

    What I mean is, from code point of view, it's not <img src="">, but <style="background: url()">, then put type on top of the background image.  Can Edge Reflow handle that?  Really appreciate your help.

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/edge_reflow_preview

  • Help request - Could need some help with a logo for my site

    Hi I'm working on a project and i have come across a huge problem.
    please check out my logo on this site:
    http://www.tuxxen.com
    I have no idea how i should make my logo and  it seems like i have no skills to make one either,  i have been trying for days to make one that look decent but it end up looking really really bad each time.
    Could really need some help to get a nice logo up, the site im working on is about fishing, the name of this site will be changed to: Absolut mete. So the logo need to have this name.
    I have managed to make the layout for my site but i cannot make a logo its a bit funny really but yeah...
    Any help are very much welcome!

    THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
    I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
    So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
    many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png

  • Change different 7912 logos on two sites

    Hi,
    CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
    as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
    We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
    We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
    Could someone let me know or any other better way to do?
    Thanks,
    JJ

    Hi JJ,
    This should work just the way you have described. Have a look;
    Idle
    Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
    Leave this field blank to accept the default setting.
    Idle Timer (seconds)
    Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
    Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
    Here how on CCM;
    Method 1:
    Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
    In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the URL Idle Time field, enter any positive value in seconds.
    Method 2:
    Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
    Choose the phone/phones on which you want to put the display.
    In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the Idle Timer field, enter any positive value in seconds.
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
    Hope this helps!
    Rob

  • Creating a high quality website logo in Photoshop or Illustrator

    I'm trying to create a very high quality crips website logo using Photoshop or Illustrator, but everytime I export the design into PNG, the text borders are not as crip compared with Google logo. How do I create a very crips and sharp logo using Adobe software? Please tell me what software, how to export, what the size of the document should be, what resolution, any detailed tricks, designs and pointers would be helpful. I know I can create a logo, but it is blurry and it shows. When I put my logo on a gray background for instance, the text becomes more blurrier. You know the deal.

    hmmm. Where to start?
    The question points to several areas of digital design fundamentals that indicate you need to educate yourself through classes, books, tutorials. The PS Forum can't really get at all the issues you bring up; resolution, vector vs raster, web graphics, transparency and the web. You are asking how to make a logo and that is a really broad request not easily answered.
    A quick search for "Photoshop for Web Design" yields a lot of possibilities. There are a lot of books and a lot of free and not so free online tutorials.
    Here are a couple:
    http://www.lynda.com/Photoshop-tutorials/Photoshop-for-Web-Design/
    http://www.1stwebdesigner.com/tutorials/web-design-layout-tutorials-2010/
    Good Luck.

  • How do I create a watermark for my website logo using Adobe Photoshop CS4?

    Hello!  I need help creating a watermark for my website logo using Adobe Photoshop CS4.  Thank You!

    MFS APPLE PRO wrote:
    Hey Don,
    This is a pretty straight forward process, in settings on your phone go to general>network>personal hotspot. As SP has said most likely you will have to contact your wireless provider to set it up. I know for at&t you can set up this option through att.com/wireless or dial 611. It will cost you around 45 dollars per month and this gets you the ability to tether up to 4 wireless devices and alots you 4GB per month data. Hope this helps.
    Mike
    I've heard that it will also cancel your current contract.  That isn't such a huge deal unless your current contract is an unlimited one--you can never get it back.
    Does anyone know for sure?  I've asked AT&T and received a "Yes it will cancel your current contract." and "No, it is a new contract--you keep your old contract if you wish."  I suspect it is the former but it would be good to know for sure before ordering the service.

  • Changing site collections logos across all site collections

    HI All,
    I need to change the logo across all site collections, which are around 300-400, so don't intend to do this manually.
    My question is, will simply replacing the current logo in the C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE....
    with the logo I want to change to, and naming it exactly the same as the current logo, not achieve this?
    I have searched online and people run PS to achieve this, but in my head the above seems to be work, please correct me?
    Thanks

    I completely agree with Alex and not suggest to touch/change root folder. Initially it might looks easy but it may create issue.
    My option is to BRAND the sites. Master page branding is not a new concept and it mainly use for unanimous look and feel
    Look at below links which will help you to explore about branding
    SharePoint Branding 101:
    Branding Master Pages
    SITE LOGO AND CUSTOM SHAREPOINT MASTER PAGE
    https://www.youtube.com/watch?v=BX4yJA95FUU
    Hope it will help
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • On 'insert FLV' player sits on top of video, not below

    Hi, there.
         I'm not a website designer, just a vdeo editor, who would like to post an FLV on a simple page with flash player controls below the video.  In the past when I've used the 'insert flv' function, I've been able to have the player sit below the image.  Now, when I insert an FLV, the player sits on top of the video.  Is there any way to fix this without adjusting the code? (which I don't know how to do) Any help would be appreciated.  Thanks.

    This behavior depends on the player template you choose. If you think the result you see is incorrect, adjust the height and width attributes, which can be done in the property inspector, if you're not into code.
    Mylenium

  • Place an mp3 player on top of an image in image-based website??

    Hi everyone!
    I am trying to create a website for our company, and have made an image-based website in Photoshop. The whole background is composed of sliced images from a Photoshop file, and I want to add links, drop down menus, a photo slider, and an mp3 player with Dreamweaver. I am having a great deal of trouble as I don't know nearly as much about coding as I would like to!
    Right now I am trying to add an mp3 player to the bottom of our website, but I want it to be on top of the bar at the bottom of the page. Since the bar is technically an image, every time I paste the code for the mp3 player into the HTML, it goes above or below the bar rather than on top of it. Is there any way to remedy this?? Advice would be appreciated! Thanks

    Is there any way we can see your website? Fishing around in the dark is not a good way to give advice.
    I should also mention that the "slicing Photoshop files" method of website building is probably not the way we build websites anymore, if I understand where you are coming from.
    Generally speaking, if you have an image in the background set up in your style sheet, you should be able to put things on top of that image.
    So, let's say we have a div and I'm going to call it "player." We may want to have more than one player on a page, so we'll give it a class:
    CSS:
    .player {
         background-image: url("/path/myimage.jpg");
    HTML:
    <div class="player">
    <audio controls>
      <source src="/path/myaudio.ogg" type="audio/ogg">
      <source src="/path/myaudio.mp3" type="audio/mpeg">
    Your browser does not support the audio element.
    </audio>
    </div>
    Now, what I have done here is to create an HTML5 Audio player. The web page with the audio must be HTML5. And you will probably need to edit your .htaccess file to include the following:
    AddType audio/ogg .oga
    AddType video/ogg .ogv
    AddType application/ogg .ogg
    AddHandler application-ogg .ogg .ogv .oga
    If you don't know how to edit an .htaccsss file, you should be able to add those MIME types in your host's Control Panel.
    The way you declare an HTML5 document is to start the document with:
    <!DOCTYPE HTML>
    <html>
    This would be before you start your <head> region.
    But I must warn you, I'm offering all of this with a great deal of trepidation. I believe you're putting together a website using tables and inline code for things like backgrounds and such. Modern web design does not use tables to format web pages.
    Without looking at what you're doing, there is a very big limit as to how I can advise you.
    -Mark

  • How to find "start-dreamweaver-first-website" zip in local site folder?

    Hallo...
    I have download that file already. But somehow it does not show up on the "local site folder" when i want to save it as in the tutorial video suggest....
    Do i need to do anything else before that to save it.???
    BTW, how to unzip that folder....??
    Thanks a lot.

    Dear Ken:
    Many many thanks...[?]
    2015-03-08 19:22 GMT+08:00 Ken Binney <[email protected]>:
        how to find "start-dreamweaver-first-website" zip in local site
    folder?  created by Ken Binney
    <https://forums.adobe.com/people/Ken+Binney> in *Dreamweaver support
    forum* - View the full discussion
    <https://forums.adobe.com/message/7264408#7264408>

  • Publishing site - remove "current site" from top navigation

    SP puts a link to the current site in top nav bar in addition to the "home"page link. If you're already in the site why is there is a link to it????
    Is the only option to remove the home link so the (stupid) site link takes its place?

    Hi,
    I presume that you are using SharePoint 2010 and Publishing site, if you want hide the Home Page Link, then you can hide the link using SharePoint designer 2010.
    here are the tags need to made visible = false like the below line, another best practice to use Panel control to group all of the tags within the panel and make the panel visibility as false.
     <asp:ContentPlaceHolder id="PlaceHolderSiteName" runat="server" Visible="false" >
    <SharePoint:SPLinkButton runat="server" NavigateUrl="~site/" id="onetidProjectPropertyTitleGraphic">
    <SharePoint:SiteLogoImage name="onetidHeadbnnr0" id="onetidHeadbnnr2" LogoImageUrl="/_layouts/images/siteIcon.png" runat="server"/>
    </SharePoint:SPLinkButton>
    <asp:ContentPlaceHolder id="PlaceHolderSiteName" runat="server">
    <SharePoint:SPLinkButton runat="server" NavigateUrl="~site/" id="onetidProjectPropertyTitle"><SharePoint:ProjectProperty Property="Title" runat="server" /></SharePoint:SPLinkButton>
    </asp:ContentPlaceHolder>
    you can use the same method for Team sites also, tags would be different though.
    Edit: SPLinkButton  would be the control you should make visible as false.
    If you could upload the image of your page, it would be better to understand.
    See this link for more information on branding -
    http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • HT1338 In order to some calculator functions on the "Bankrate" website I need to enable the Java Browser function.  I can I accomplished that task?

    In order to some calculator functions on the "Bankrate" website I need to enable the Java Browser function.  I can I accomplished that task?

    In recent versions of Lion, Java is automatically disabled (for security reasons) if it goes unused for a certain amount of time.  You can re-enable it in the General pane of the Java Preferences app, found in /Applications/Utilities.  (Check the box at the top of that pane.)  If trying to open Java Preferences results in a message asking if you want to install Java, you don't actually have Java yet.  Click the install button to install it.
    Note that having Java turned on in your web browser is dangerous, due to recent proliferation of malware that uses Java to install itself.

  • When I close out a website it goes to my desk top and then tells me firefox is running and I have to shut down the system

    when I close out a website it goes to my desk top and then tells me firefox is already running and I have to shut down my system and bring it back up and wait to log back in. It's quite frustrating.

    Try Ctrl>ALT>DEL then click Start Task Manager, then find the process firefox.exe, then click end program, then try opening Firefox again. <!-- click applications > new task.... > explorer.exe --> done! If that doesn't work, then try re-installing Firefox or going to this link to safe mode area and click continue to safe mode and then try and exit, if this problem still occurs then disable extensions and plugins

Maybe you are looking for