Weird behavior in latest release

I've noticed a couple odd things in the latest beta release:
1) When I click on a shape that didn't previously have focus, the MouseEvent always has a click count of 2.
2) The default font size of RadioButtons appears to have been increased, but their default preferred width doesn't appear to have been bumped up to match, so they always show an ellipsis.
Has anyone else noticed these things, and should I report them as bugs?

I'm not sure what I'm seeing is the same thing. The bug described in that report is that you're always seeing double the number of mouse clicks that you should.
What I'm seeing is, I get a click count of 2 the first time I click on a shape only, and after that it behaves how it should for as long as I don't click on another shape. So, for instance, if I put a println() in the onMouseClicked handler to print out the click count of a shape, and I double-click it, I'll see the following output:
2
3
If I wait a few seconds, then double-click it again, I'll see the output I would expect:
1
2
However, if I click on another shape, and then click on the shape again, the click count will start at 2 again.

Similar Messages

HELP! Sudden weird behavior in Aperture and MobileMe!

So, I am running the latest version of Aperture and have been successfully publishing many albums to mobileme.
I have several external hard drives connected to my computer, and almost all of my image files in aperture are referenced. Lately I have been importing the images from SD cards directly into the aperture library, editing, then relocating the masters so that i would only store the keepers (i went this route because it was unclear to me whether or not originals were also deleted if i deleted referenced files--the pop up wording seems vague to me). I usually back up the new image files on the harddrives manually, and then back up the aperture library to a vault after every major import. I also wait until I have done this to reformat my sd cards.
Of course, this morning, something happened. We had a power outage, and although i have my entire system on UPS units, i had to shut everything down because the batteries only last so long. I did not have time to perform my usual Vault back up. I had a handful of projects with masters in the aperture library (not yet edited and masters relocated). There is one project I do not still have on sd card so that one (and inconvenience for the others) hangs in the balance.
The situation is this: When I rebooted after our power outage (i reiterate that all hard drives as well as the main mac were shut down safely and properly on battery power), all referenced file projects appear normal, but I cannot see any images in the projects with masters stored in the aperture library. The weird part is that if i put the pointer over those projects, i do get the little balloon that tells me how many versions are in each project. It's like aperture knows they are there, but I don't see them. And another weird thing--the REJECTED images from these projects DO appear when I click on the Rejected Smart Album. And the starred images from those projects DO appear when I click on the one-star-or-better smart album. I don't get it.
I also cannot see some of the mobileme galleries within aperture when i select them. When i went on-line to see my gallery, there is some weird behavior...some albums are acting strange, confusing images from other albums, or not accepting my username and password settings (I know they are right), or giving me a different album when I select one to look at.
PLEASE HELP if you can. If I need to, I can always restart from my vault version of the library and reimport last week's stuff from the sd cards, but i'd rather not do that, not to mention there is that one project i will lose.
I'm here waiting for anyone who thinks they can help!
Thanks,
Heather
Message was edited by: heatherperryphoto
Message was edited by: heatherperryphoto

Hi Heather
I was wondering if I was the only one with this problem. Unfortunately I don't have an answer. I'm running Aperture 2 on a MacBook, with my library on an external drive. The problem is increasing; it seems that most (but not all) recent projects are affected, but none that I created before the problem first started.

Weird behavior in master-detail

Dear Forum,
I need to implement an application but I still have a halting error.
I have this strange problem and I'll try to explain.
I have this masterscreen with search functionality. When I do a search, I get a result. When I now enter the details screen of the second row of the search result and I change the fields on the details screen and do a commit, I get the message that the changes were made successfully, but I see the primary key jump to the value of the primary key from the details of the first row of the search results on the masterscreen.
And when I look at the details of the first row, the changes were made in this details, and NOT in the details in which I needed to make the changes.
And now more weird... I can only reproduce the problem in Internet Explorer and whatever I try, it works correct in Firefox.
So the functionality should work as supposed, as it wouldn't work in Firefox.
Has anyone encountered this problem before or does anyone has a solution or tip to get to the solution?
Your help is much appreciated.
Arjen

Steven,
When I tried to create the logs you requested, I ran up to a different problem, also affecting this behavior. When I repaired this, still the weird behavior took place in Internet Explorer. And in Firefox the problem was solved. So I tried to disable the cache in Internet Explorer. This solved the problem there as well..
So this behavior doesn't happen anymore with the cache disabled, thus solved this problem.
Thanks for the effort anyway.
Arjen

Weird behavior in Classic or not?

It has been a long time since I've needed to use Classic (on 10.4.something) Today I needed to do something that could only be done in classic. I thought I saw some weird behavior so I tried a couple of other classic apps.    All started Classic just fine, brought up their document window and menu bar. But there was no classic desktop under the app's window and while the menu bar showed "finder" as an open application that could be switched to (the right-most menu item) but when I switched to it I got the OS X finder, not a OS 9 one.   Occasionally I can get what looks like a Finder menu bar, but that's on it are the Apple and Help and the app switcher.
Recently I've been playing with Sheepshaver on a Snow Leopard system, which brings up an honest-to-goodness OS 9 desktop.
Now, I am misremembering how Classic works (in effect, no desktop and no finder) or is something wrong. I checked all three of my systems running Tiger and they have the same behavior.   (A G4 -- that will still boot into OS 9, a powerbook G4, and a mac-mini.)
Ted Lee
Minnetonka, MN

OK, I found an article on rebuilding the desktop and it indicated that while there is a file for the OS9 desktop, in the classic environment it is invisible and can only be found through an alias that is created on the OS X desktop. I suspect I've deleted that alias since I didn't have any particular need for it.   The article tells you how to re-create the alias from the terminal. indeed there is a folder there and it is empty. No particular use for it -- if you select Desktop from an OS 9 app you get the OS X desktop.   I can also see why there's no real OS 9 finder -- anything you could have done from it you can do from the OS X finder -- except the "Apple Menu" and that's why that's under the classic icon on the right half of an OS X menu bar. There still is a "rebuild desktop" in the Classic prefs -- I assume that's so you get the right doc/app association in the classic environment, since I don't think OS X understands the classic creator/type info.
So sounds very much like I'm misremembering!
Ted Lee
Minnetonka, MN

Weird behavior in opening Aperture images in Photoshop

I have found a lot of really weird behavior when opening Aperture images in an external editor (in my case, Photoshop, so I'll use PS to refer to it):
1) If the master image is opened in PS, a new version is created when the file is opened, not saved. So quitting PS without saving leaves you with a new version of the file, regardless of whether you actually saved any changes or not.
2) If a version (not the master) is opened in PS, a new version is not created, either on open, or on save. So in other words, changes to that version in PS when saved overwrite that version, and the previous condition of that version is lost (with respect to versioning).
3) If multiple versions of the same image are opened simultaneously in PS, there doesn't seem to be a way to tell the difference between them in PS, except for visually (possibly meta-data, but I haven't checked that, nor would I want to be forced to). The file names of all versions are exactly the same.
I'm looking for feedback from anyone out there who can explain why this isn't completely quacky version control. I've been using version control almost my entire career (as a software programmer) and here's how I have seen almost invariably version control work:
1) New versions of files are always created upon commit, i.e. saving of the file, not on opening a file. (Do not confuse this with working copies, think about what is present in the repository).
2) Opening / editing any file version is never destructive. Any change to that file version that is saved (committed) results in a new version, not an overwrite to the same version.
Aperture's interface basically has combined what traditional version management has represented separately, that being the client and repository views of a project. They are showing all versions of a file simultaneously. This is fine, but I'm really not liking the fact that some changes create new versions, other changes overwrite versions, and one case, merely opening the file creates a new version, whether there are any changes saved or not. In addition, when working with multiple versions in the editor, the file name and/or interface doesn't give any indication of what version you are working with. Easy to say that's the fault of the external editor, but I disagree -- all external editors are going to work with filenames, so Aperture should produce a unique namespace for any file version so that any external tool will be able to distinguish (visually) one file from another.
Is this completely wacky version management, or is it just me?
Brad
Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz Mac OS X (10.4.2) PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

Hi Bradley,
Due to the way I personally use Photoshop, I want Aperture to behave as it does.
That's because, with Photoshop, I use layers extensively. Any edits I do (levels, curves, saturation, sharpening) I do on layers. I can delete the layers at any time (or select to show or hide them). Because of this, I actually WANT Aperture to behave the way it does. Once I've done a bunch of edits in Photoshop, if I select again to edit that file in the external editor, I want to work on that specific file (to add another layer, or change one). I don't want another duplicate. I tinkered with this over the weekend, and it worked very nicely for me.
Perhaps you work differently from within Photoshop? Do you ever use layers? If I were to have a bunch of Photoshop "versions," each with 5 layers, I'd have like 5 GB of "versions" for my original 8 MB RAW file, due to the size of PSD files. Yuck

Weird behavior in UCCX 7.0.1 SR05

Hi team,
I've got a weird behavior in a UCCX 7.01 SR05 installation.
All incomming calls which go to an agent who is set "ready" set the agent to state "not ready" and go to queue...
This behavior also occurs with standard script icd.aef.
Had anybody has same behavior in an UCCX 7 installation? Or can anybody help me? I checked my configuration twise and couldn't find
any issue.
Thanks a lot,
Tobias

I've seen this happen before because of a CUCM configuration issue. Check whether the CUCM Calling Search Space for the UCCX CTI ports can call the partition of the agent's extension. My guess is that the call attempts to connect but CUCM will not allow it to go through. UCCX then marks the agent as "Not Ready" and drops the call back in queue.

Late 2011 MacBook Pro 2.4GHz Quad-core Intel i7 Vs Latest Release

Hi Guys I own a 2011 2.4GHz Quad-core Intel i7, 8 gigs of ram and 500 SSD. I've a photographer and tether my camera to the computer to shoot. I feel the performance is good and everything is on order. Wondering if upgrading to the latest release if going to see a signifant change in performance. I generally don't edit on my laptop so not sure what the retna display does for me.
Thanks!

Ray Kachatorian wrote:... Wondering if upgrading to the latest release if going to see a signifant change in performance....
(1) On my three 10.9 Macs, upgrading did two very obvious things:
• removed some useful features like the ability to set individual notification audio tones for different chat buddies and collaboration via iChat Theater. (These features are not supported in OS X 10.9's Messages app that replaced iChat.) There may be changes I do not like in other apps, too, but these are two that I noticed.
- and -
• slowed my machines down as compared to OS X 10.8, particularly on booting, opening apps, and other CPU/System interactions. The amount of slowing varied by machine, with my old 13" MBP being nearly unacceptable. My i7 MBP is not nearly so bad, although the the difference is noticeable, perhaps 10% vs almost double boot time on my old 13".
(2) To determine if upgrading will be a problem on your system, I suggest that you:
• make a current Time Machine backup
• configure  > System Preferences... > Time Machine to "OFF"
• upgrade Mac OS
• use your Mac long enough to see if you like the change
(3) If you want to keep the upgrade, turn Time Machine backups back on and continue using the new OS.
(4) If you don't like the upgrade, recover your system from your Time Machine backup.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.9 24" LED Cinema Display
iPad2 iOS 7.1.1 External iSights
MBP 15" i7 (Early'11) OSX 10.9 13" MBP (Mid'09) 2.26GHz OSX 10.9

HT1338 Software Update is not finding latest release (April 3) of Java 2012 001 Update for Mac OS X Lion 10.7.3 on iMac mid-2007 that downloaded automatically on iMac mid-2011

Software Update is not finding latest release (April 3) of Java 2012 001 Update on my iMac mid-2007, but it downloaded it automatically on my iMac mid-2011 yesterday. Both are running Mac OS X Lion 10.7.3. When I try to download the update manually from Apple on my older iMac, it downloads okay, but when I try to open the dmg file, I get a warning message saying that opening this update may make your computer LESS secure. Do you want to proceed? (I did not).
Why would Software Update find this update and install it automatically on one iMac and not the other, if they are both running the same version of Mac OS X Lion? I checked the installed software list on my old iMac and the Java update does not appear there. Why would this update make my old iMac less secure?

Recall that Java is not installed as part of Lion.
You have to install it (and are asked if you want to) when you first try to run some java stuff.
Is it possible that the iMac 2007 does not have Java yet?
Try this: open Terminal (from Utilities) and type java -version (exactly like that, with the space before the hyphen).
What do you get?
Consistent with this theory is that the dmg thing gave you the warning - installing java might make your machine less secure because java is a means for bad guys to try to do bad things to your computer.
charlie

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

TLF 2/2.1/3 Weird behavior with floating graphics?

Hi guys,
I'm working on a chat application running on RED5 / AS3 and I'm struggling to get my client "UI" working perfectly.
My problem is related to the TL Framework, on every version available.
Basicly, I want to display a picture ( for user messages ) and icons ( for notifications ) on the left side of my lines, like this :
So, I'v been messing around with "float=start", "float=left" and such, but i'm always encountering weird behaviors whenever I scroll or resize my containerController. It's quite easy to reproduce with the following code :
public class Main extends Sprite
          private var controller:ContainerController;
          public function Main():void
                    if (stage) init();
                    else addEventListener(Event.ADDED_TO_STAGE, init);
          private function init(e:Event = null):void
                    stage.scaleMode = StageScaleMode.NO_SCALE;
                    stage.align = StageAlign.TOP_LEFT;
                    removeEventListener(Event.ADDED_TO_STAGE, init);
                    var holder:Sprite = new Sprite();
                    addChild( holder );
                    var tFlow:TextFlow = new TextFlow();
                    for ( var i:int = 0; i < 50; i++ )
                         tFlow.addChild( createLine() );
                    controller = new ContainerController( holder, 400, stage.stageHeight );
                    tFlow.flowComposer.addController( controller );
                    tFlow.flowComposer.updateAllControllers();
                    stage.addEventListener( Event.RESIZE, resizeController );
          private function resizeController( e:Event ):void
                    controller.setCompositionSize( 400, stage.stageHeight );
                    controller.textFlow.flowComposer.updateAllControllers();
          public function createLine( ):DivElement
                    var d:DivElement;
                    var p:ParagraphElement;
                    var im:InlineGraphicElement = new InlineGraphicElement();
                    im.source = new Bitmap( new BitmapData( 16, 16, true, 0x30FF0000 ) ); // 0x30 Alpha
                    im.float = "left";
                    d = new DivElement();
                    d.clearFloats = "both";
                    p = new ParagraphElement();
                    d.addChild( p );
                    p.addChild( im );
                    return d;
Basicly, I'm stacking 50 transparent "floating" elements. It works fine most of time, but if I randomly resize my Flash Player Window, I can get the first "invisible" element to overlap the last "visible" :
It seems to be happening right when the last "floating" element should disappear. Instead, it gets "over" the previous one. It happens upon container resize and scrolls. I'v encountered this issue on lastest 2, 2.1 and 3 TLF builds.
Beside the visual "bug", it also screws up my container.getContentBounds().height calls - which can make scrolling "trembling", as the height gets reajusted.
I'm running out of ideas about how to handle this. This bug appears whenever I use "floating" graphics and I can't think of any other way to display graphics on the left side of my chat-lines.
Maybe someone ran into this very problem and figured out a way to make it work?
Excuse my english, thanks in advance,
Lionel.

Thank you for your report. And I have found the root cause.
In BaseCompose.as
protected function composeFloat(elem:InlineGraphicElement, afterLine:Boolean):Boolean
if (!floatFits && (_curParcel.fitAny || _curParcel.fitsInHeight(totalDepth, int(logicalFloatHeight))) && (!_curLine || _curLine.absoluteStart == floatPosition || afterLine))
                floatFits = true;
The condition of if is true, only when the weird behavior happens. We need to discuss about how to fix it.

URGENT Please help with weird behavior of test suite

Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,

Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

Weird behavior by APD

Hi Guru's
I am observing very weird behavior in one of the process chain at APD step.APD step is getting failed due to lack of logs and due to this chain status is changed to failure in work-load automation screen.But without my intervention this step finishes successfully by getting logs after few minutes.Now we have to change chain status to success in WLA to run further dependent loads.Could anybody help me out in this aspect to avoid unnecessary change in its status and how it is picking up logs.
Thanks!!!
Kuldeep

Logs not found --> Could it be due to table space issue? Did you have a look at the parameters? Is there a short dump in ST22? Ideal solution would be to fix the logs not found issue. We can also think about work arounds to restart the process chain automatically after the APD finishes successfully. But may be you can work with your basis team to see if it is table space related issue.

I just upgraded to iMovie 10.0.1, latest release and need to move my projects and events to an external attached hard drive. i do not see any hard drive icons in this release. How do I do this?

I just upgraded to OSX Mavericks and also the lastest release of iMovie. The version says 10.0.1, but is it the latest release as of 10/14/2013. I need to free up disc space on my iMac hard drive and move the contents of iMovie libraries to an attached external drive already functioning on my system. I need to move both events and projects and keep all intact and related. I have seen disc drives in the previous version of iMovie, but I do not in this one. How do I move these items? I am in desperate need for disc space.

You can create a brand new Library under File Menu>Open Library>New...
Create the new library on the external hard drive. Then drag all the Events/Projects folders into that Library. Close the Library, quit iMovie 10.x. Now test the new Library by opening iMovie again and see that all the Events/Projects are there in the New Library. You can now safely delete or close the exisitng Library file as those are now duplicates of the real Library sitting on the external hard drive.
Another way to do this is find the exisitng Library file, and simply drag it to the external hard drive in the Mac Finder (disk to disk copy of the Library file, by drag and dropping). Then go back into iMovie, File Menu>Open Library>Other... then naivgate out to the external hard drive and choose the Library you moved within the Finder.
The new iMovie 10.x is much more friendly to use the Finder to run and gun and move stuff at will. It used to be the case the Library file had to be completely managed within iMovie and doing Finder copies would break them. Now it's more flexible in that it works the way most people used to think it should work (doing drag and drop in the Finder)

Weird behavior in latest release

Similar Messages

Maybe you are looking for