Weird behaviour at log creation and cleaning.
Hi All,
One of our ReplicatedEnvironment is creating very small log files with very small % of utilization.
The tree first columns represents the DbSpace output; where as the next columns represents part of the "ls -lh <envHome>/*.jdb" result. All has been extracted from Master Environment.
000000e4 12 70 12K Apr 14 12:28 /bdb/AuditingBO/000000e4.jdb
000000e3 44 77 45K Apr 13 17:48 /bdb/AuditingBO/000000e3.jdb
000000e2 27 64 27K Apr 12 22:55 /bdb/AuditingBO/000000e2.jdb
000000e1 63 66 63K Apr 11 22:53 /bdb/AuditingBO/000000e1.jdb
000000e0 28 13 29K Apr 10 00:30 /bdb/AuditingBO/000000e0.jdb
000000df 0 0 69 Apr 9 00:30 /bdb/AuditingBO/000000df.jdb
000000de 23 74 24K Apr 8 15:22 /bdb/AuditingBO/000000de.jdb
000000dd 49 34 50K Apr 7 16:45 /bdb/AuditingBO/000000dd.jdb
000000dc 25 72 26K Apr 6 19:05 /bdb/AuditingBO/000000dc.jdb
000000db 10 74 10K Apr 5 20:03 /bdb/AuditingBO/000000db.jdb
000000da 186 39 187K Apr 5 12:55 /bdb/AuditingBO/000000da.jdb
000000d9 0 0 69 Apr 3 00:30 /bdb/AuditingBO/000000d9.jdb
000000d8 0 0 69 Apr 2 00:30 /bdb/AuditingBO/000000d8.jdb
000000d7 64 37 64K Apr 1 22:46 /bdb/AuditingBO/000000d7.jdb
000000d6 14 63 14K Mar 31 17:44 /bdb/AuditingBO/000000d6.jdb
000000d5 80 44 81K Mar 30 19:32 /bdb/AuditingBO/000000d5.jdb
000000d4 9 74 9.6K Mar 29 20:31 /bdb/AuditingBO/000000d4.jdb
000000d3 15 73 16K Mar 28 19:07 /bdb/AuditingBO/000000d3.jdb
000000d2 27 7 28K Mar 27 00:30 /bdb/AuditingBO/000000d2.jdb
000000d1 1 63 1.2K Mar 26 11:40 /bdb/AuditingBO/000000d1.jdb
000000d0 19 61 19K Mar 25 20:41 /bdb/AuditingBO/000000d0.jdb
000000cf 76 40 76K Mar 24 19:19 /bdb/AuditingBO/000000cf.jdb
000000ce 92 34 93K Mar 22 23:13 /bdb/AuditingBO/000000ce.jdb
000000cd 30 25 30K Mar 21 20:56 /bdb/AuditingBO/000000cd.jdb
000000cc 0 0 69 Mar 20 00:30 /bdb/AuditingBO/000000cc.jdb
000000cb 0 0 69 Mar 19 00:30 /bdb/AuditingBO/000000cb.jdb
000000ca 34 23 35K Mar 18 22:07 /bdb/AuditingBO/000000ca.jdb
000000c9 8 73 8.3K Mar 17 22:46 /bdb/AuditingBO/000000c9.jdb
000000c8 12 62 13K Mar 16 20:01 /bdb/AuditingBO/000000c8.jdb
000000c7 54 13 55K Mar 15 21:11 /bdb/AuditingBO/000000c7.jdb
000000c6 492 36 492K Mar 15 00:30 /bdb/AuditingBO/000000c6.jdb
000000c5 136 29 136K Feb 18 22:37 /bdb/AuditingBO/000000c5.jdb
000000c4 19 60 19K Feb 17 18:52 /bdb/AuditingBO/000000c4.jdb
000000c3 34 19 35K Feb 16 19:26 /bdb/AuditingBO/000000c3.jdb
000000c2 15 75 16K Feb 15 20:14 /bdb/AuditingBO/000000c2.jdb
000000c1 19 62 19K Feb 14 18:41 /bdb/AuditingBO/000000c1.jdb
000000c0 21 7 22K Feb 13 00:30 /bdb/AuditingBO/000000c0.jdb
000000bf 0 0 69 Feb 12 00:30 /bdb/AuditingBO/000000bf.jdb
000000be 12 62 12K Feb 11 18:47 /bdb/AuditingBO/000000be.jdb
000000bd 52 35 52K Feb 10 22:50 /bdb/AuditingBO/000000bd.jdb
000000bc 18 62 18K Feb 9 20:37 /bdb/AuditingBO/000000bc.jdb
000000bb 55 48 55K Feb 8 19:03 /bdb/AuditingBO/000000bb.jdb
000000ba 103 18 103K Feb 7 22:08 /bdb/AuditingBO/000000ba.jdb
000000b9 29 5 29K Feb 6 00:30 /bdb/AuditingBO/000000b9.jdb
000000b8 1 70 1.5K Feb 5 19:00 /bdb/AuditingBO/000000b8.jdb
000000b7 20 71 21K Feb 4 21:25 /bdb/AuditingBO/000000b7.jdb
000000b6 58 36 59K Feb 3 19:22 /bdb/AuditingBO/000000b6.jdb
000000b5 21 71 21K Feb 2 18:35 /bdb/AuditingBO/000000b5.jdb
000000b4 25 69 25K Feb 1 20:31 /bdb/AuditingBO/000000b4.jdb
000000b3 53 19 54K Jan 31 18:41 /bdb/AuditingBO/000000b3.jdb
000000b2 0 0 69 Jan 30 00:30 /bdb/AuditingBO/000000b2.jdb
000000b1 26 5 27K Jan 29 00:30 /bdb/AuditingBO/000000b1.jdb
000000b0 11 75 11K Jan 28 23:36 /bdb/AuditingBO/000000b0.jdb
000000af 14 74 15K Jan 27 21:10 /bdb/AuditingBO/000000af.jdb
000000ae 48 31 48K Jan 26 23:29 /bdb/AuditingBO/000000ae.jdb
000000ad 18 73 19K Jan 25 22:55 /bdb/AuditingBO/000000ad.jdb
000000ac 20 68 20K Jan 24 22:17 /bdb/AuditingBO/000000ac.jdb
000000ab 21 4 22K Jan 23 00:30 /bdb/AuditingBO/000000ab.jdb
000000aa 0 0 69 Jan 22 00:30 /bdb/AuditingBO/000000aa.jdb
000000a9 18 66 18K Jan 21 18:43 /bdb/AuditingBO/000000a9.jdb
000000a8 95 15 96K Jan 20 19:53 /bdb/AuditingBO/000000a8.jdb
000000a7 48 33 49K Jan 19 19:51 /bdb/AuditingBO/000000a7.jdb
000000a6 16 65 16K Jan 18 21:50 /bdb/AuditingBO/000000a6.jdb
000000a5 37 45 38K Jan 17 19:18 /bdb/AuditingBO/000000a5.jdb
000000a4 2 68 2.2K Jan 16 13:58 /bdb/AuditingBO/000000a4.jdb
000000a3 1 67 1.8K Jan 15 17:06 /bdb/AuditingBO/000000a3.jdb
000000a2 117 15 117K Jan 15 00:00 /bdb/AuditingBO/000000a2.jdb
000000a1 39 31 40K Jan 13 20:53 /bdb/AuditingBO/000000a1.jdb
000000a0 16 65 16K Jan 12 19:25 /bdb/AuditingBO/000000a0.jdb
0000009f 31 61 32K Jan 11 23:49 /bdb/AuditingBO/0000009f.jdb
0000009e 56 41 56K Jan 10 17:52 /bdb/AuditingBO/0000009e.jdb
0000009d 0 0 69 Jan 9 00:30 /bdb/AuditingBO/0000009d.jdb
0000009c 0 0 69 Jan 8 00:30 /bdb/AuditingBO/0000009c.jdb
0000009b 32 28 33K Jan 7 18:00 /bdb/AuditingBO/0000009b.jdb
0000009a 0 58 883 Jan 6 12:31 /bdb/AuditingBO/0000009a.jdb
00000099 29 70 30K Jan 5 19:59 /bdb/AuditingBO/00000099.jdb
00000098 201 19 202K Jan 4 23:23 /bdb/AuditingBO/00000098.jdb
00000097 0 0 69 Jan 2 00:30 /bdb/AuditingBO/00000097.jdb
00000096 17 8 18K Jan 1 00:30 /bdb/AuditingBO/00000096.jdb
00000095 3 71 3.4K Dec 31 20:23 /bdb/AuditingBO/00000095.jdb
00000094 5 71 5.4K Dec 30 21:23 /bdb/AuditingBO/00000094.jdb
00000093 65 26 66K Dec 29 22:45 /bdb/AuditingBO/00000093.jdb
00000092 34 29 35K Dec 28 23:05 /bdb/AuditingBO/00000092.jdb
00000091 18 66 19K Dec 27 22:34 /bdb/AuditingBO/00000091.jdb
00000090 14 4 15K Dec 26 00:30 /bdb/AuditingBO/00000090.jdb
0000008f 0 0 69 Dec 25 00:30 /bdb/AuditingBO/0000008f.jdb
0000008e 6 74 6.7K Dec 24 15:15 /bdb/AuditingBO/0000008e.jdb
0000008d 254 20 255K Dec 23 22:21 /bdb/AuditingBO/0000008d.jdb
0000008c 27 43 28K Dec 22 20:03 /bdb/AuditingBO/0000008c.jdb
0000008b 497 19 497K Dec 22 00:00 /bdb/AuditingBO/0000008b.jdb
0000008a 0 0 69 Dec 9 00:30 /bdb/AuditingBO/0000008a.jdb
00000089 114 6 115K Dec 8 15:58 /bdb/AuditingBO/00000089.jdb
00000088 4 38 5.0K Dec 7 23:45 /bdb/AuditingBO/00000088.jdb
00000087 0 0 69 Dec 6 00:32 /bdb/AuditingBO/00000087.jdb
00000086 37 5 38K Dec 5 00:30 /bdb/AuditingBO/00000086.jdb
00000085 0 0 69 Dec 4 00:30 /bdb/AuditingBO/00000085.jdb
00000084 14 41 15K Dec 3 23:50 /bdb/AuditingBO/00000084.jdb
00000083 79 20 79K Dec 2 23:52 /bdb/AuditingBO/00000083.jdb
00000082 14 41 14K Dec 1 23:48 /bdb/AuditingBO/00000082.jdb
00000081 31 35 32K Dec 1 00:30 /bdb/AuditingBO/00000081.jdb
00000080 46 17 46K Nov 29 23:58 /bdb/AuditingBO/00000080.jdb
0000007f 0 0 69 Nov 28 00:30 /bdb/AuditingBO/0000007f.jdb
0000007e 0 0 69 Nov 27 00:30 /bdb/AuditingBO/0000007e.jdb
0000007d 71 18 71K Nov 26 23:51 /bdb/AuditingBO/0000007d.jdb
0000007c 28 37 28K Nov 25 23:49 /bdb/AuditingBO/0000007c.jdb
0000007b 92 35 92K Nov 24 23:50 /bdb/AuditingBO/0000007b.jdb
0000007a 95 25 95K Nov 23 23:52 /bdb/AuditingBO/0000007a.jdb
00000079 34 38 34K Nov 22 23:51 /bdb/AuditingBO/00000079.jdb
00000078 29 7 30K Nov 21 00:30 /bdb/AuditingBO/00000078.jdb
00000077 0 0 69 Nov 20 00:30 /bdb/AuditingBO/00000077.jdb
00000076 16 36 16K Nov 19 23:50 /bdb/AuditingBO/00000076.jdb
00000075 189 20 189K Nov 18 23:49 /bdb/AuditingBO/00000075.jdb
00000074 14 35 15K Nov 16 23:52 /bdb/AuditingBO/00000074.jdb
00000073 24 38 25K Nov 15 23:49 /bdb/AuditingBO/00000073.jdb
00000072 71 16 72K Nov 15 00:30 /bdb/AuditingBO/00000072.jdb
00000071 11 28 12K Nov 12 23:52 /bdb/AuditingBO/00000071.jdb
00000070 571 32 571K Nov 12 00:30 /bdb/AuditingBO/00000070.jdb
0000006f 43 16 44K Nov 10 23:52 /bdb/AuditingBO/0000006f.jdb
0000006e 2 41 3.0K Nov 9 19:54 /bdb/AuditingBO/0000006e.jdb
0000006d 15 41 16K Nov 8 23:57 /bdb/AuditingBO/0000006d.jdb
0000006c 47 17 47K Nov 7 19:45 /bdb/AuditingBO/0000006c.jdb
0000006b 2 40 2.4K Nov 6 15:55 /bdb/AuditingBO/0000006b.jdb
0000006a 20 33 21K Nov 6 00:05 /bdb/AuditingBO/0000006a.jdb
00000069 98 24 99K Nov 4 23:41 /bdb/AuditingBO/00000069.jdb
00000068 21 37 21K Nov 3 23:48 /bdb/AuditingBO/00000068.jdb
00000067 61 33 62K Nov 2 23:53 /bdb/AuditingBO/00000067.jdb
00000066 0 0 69 Nov 1 00:30 /bdb/AuditingBO/00000066.jdb
00000065 0 0 69 Oct 31 00:30 /bdb/AuditingBO/00000065.jdb
00000064 34 9 35K Oct 30 00:30 /bdb/AuditingBO/00000064.jdb
00000063 13 41 14K Oct 29 23:43 /bdb/AuditingBO/00000063.jdb
00000062 98 35 99K Oct 28 23:51 /bdb/AuditingBO/00000062.jdb
00000061 49 23 49K Oct 28 00:00 /bdb/AuditingBO/00000061.jdb
00000060 13 33 13K Oct 26 23:54 /bdb/AuditingBO/00000060.jdb
0000005f 4 41 4.1K Oct 26 11:06 /bdb/AuditingBO/0000005f.jdb
0000005e 183 1 183K Oct 25 23:47 /bdb/AuditingBO/0000005e.jdb
0000005d 65 19 65K Oct 20 23:48 /bdb/AuditingBO/0000005d.jdb
0000005c 72 36 72K Oct 19 23:48 /bdb/AuditingBO/0000005c.jdb
0000005b 67 23 67K Oct 18 23:48 /bdb/AuditingBO/0000005b.jdb
0000005a 0 0 69 Oct 17 00:30 /bdb/AuditingBO/0000005a.jdb
00000059 0 39 664 Oct 16 2010 /bdb/AuditingBO/00000059.jdb
00000058 83 17 83K Oct 15 2010 /bdb/AuditingBO/00000058.jdb
00000057 89 27 89K Oct 14 2010 /bdb/AuditingBO/00000057.jdb
00000056 27 42 27K Oct 13 2010 /bdb/AuditingBO/00000056.jdb
00000055 20 4 21K Oct 12 2010 /bdb/AuditingBO/00000055.jdb
00000054 13 42 14K Oct 11 2010 /bdb/AuditingBO/00000054.jdb
00000053 0 0 51K Oct 10 2010 /bdb/AuditingBO/00000052.jdb
00000052 50 4 69 Oct 10 2010 /bdb/AuditingBO/00000053.jdb
00000051 41 15 42K Oct 8 2010 /bdb/AuditingBO/00000051.jdb
00000050 42 31 43K Oct 7 2010 /bdb/AuditingBO/00000050.jdb
0000004f 74 37 75K Oct 6 2010 /bdb/AuditingBO/0000004f.jdb
0000004e 82 26 83K Oct 5 2010 /bdb/AuditingBO/0000004e.jdb
0000004d 73 39 74K Oct 4 2010 /bdb/AuditingBO/0000004d.jdb
0000004c 29 9 30K Oct 4 2010 /bdb/AuditingBO/0000004c.jdb
0000004b 0 39 665 Oct 2 2010 /bdb/AuditingBO/0000004b.jdb
0000004a 40 40 41K Oct 1 2010 /bdb/AuditingBO/0000004a.jdb
00000049 466 27 467K Sep 30 2010 /bdb/AuditingBO/00000049.jdb
00000048 49 16 50K Sep 22 2010 /bdb/AuditingBO/00000048.jdb
00000047 38 39 39K Sep 21 2010 /bdb/AuditingBO/00000047.jdb
00000046 40 27 40K Sep 20 2010 /bdb/AuditingBO/00000046.jdb
00000045 0 39 664 Sep 19 2010 /bdb/AuditingBO/00000045.jdb
00000044 0 0 69 Sep 18 2010 /bdb/AuditingBO/00000044.jdb
00000043 72 14 72K Sep 17 2010 /bdb/AuditingBO/00000043.jdb
00000042 26 34 26K Sep 16 2010 /bdb/AuditingBO/00000042.jdb
00000041 14 40 15K Sep 15 2010 /bdb/AuditingBO/00000041.jdb
00000040 116 5 117K Sep 14 2010 /bdb/AuditingBO/00000040.jdb
0000003f 55 5 56K Sep 13 2010 /bdb/AuditingBO/0000003f.jdb
0000003e 67 0 68K Sep 11 2010 /bdb/AuditingBO/0000003e.jdb
0000003d 105 5 106K Sep 9 2010 /bdb/AuditingBO/0000003d.jdb
0000003c 69 5 70K Sep 8 2010 /bdb/AuditingBO/0000003c.jdb
0000003b 206 8 206K Sep 7 2010 /bdb/AuditingBO/0000003b.jdb
0000003a 0 0 69 Sep 7 2010 /bdb/AuditingBO/0000003a.jdb
00000039 63 25 64K Sep 7 2010 /bdb/AuditingBO/00000039.jdb
00000038 0 0 69 Sep 4 2010 /bdb/AuditingBO/00000038.jdb
00000037 84 3 85K Sep 4 2010 /bdb/AuditingBO/00000037.jdb
00000036 70 14 70K Sep 2 2010 /bdb/AuditingBO/00000036.jdb
00000035 19 36 20K Sep 1 2010 /bdb/AuditingBO/00000035.jdb
00000034 52 21 52K Aug 31 2010 /bdb/AuditingBO/00000034.jdb
00000033 28 33 28K Aug 30 2010 /bdb/AuditingBO/00000033.jdb
00000032 33 3 33K Aug 30 2010 /bdb/AuditingBO/00000032.jdb
00000031 80 21 81K Aug 27 2010 /bdb/AuditingBO/00000031.jdb
00000030 23 39 24K Aug 26 2010 /bdb/AuditingBO/00000030.jdb
0000002f 118 14 118K Aug 25 2010 /bdb/AuditingBO/0000002f.jdb
0000002e 0 39 659 Aug 22 2010 /bdb/AuditingBO/0000002e.jdb
0000002d 108 11 109K Aug 21 2010 /bdb/AuditingBO/0000002d.jdb
0000002c 308 18 308K Aug 18 2010 /bdb/AuditingBO/0000002c.jdb
0000002b 0 0 69 Aug 7 2010 /bdb/AuditingBO/0000002b.jdb
0000002a 15 42 16K Aug 6 2010 /bdb/AuditingBO/0000002a.jdb
00000029 78 20 78K Aug 6 2010 /bdb/AuditingBO/00000029.jdb
00000028 81 22 82K Aug 4 2010 /bdb/AuditingBO/00000028.jdb
00000027 49 38 50K Aug 2 2010 /bdb/AuditingBO/00000027.jdb
00000026 121 16 122K Aug 1 2010 /bdb/AuditingBO/00000026.jdb
00000025 27 42 28K Jul 29 2010 /bdb/AuditingBO/00000025.jdb
00000024 23 36 23K Jul 28 2010 /bdb/AuditingBO/00000024.jdb
00000023 77 10 78K Jul 28 2010 /bdb/AuditingBO/00000023.jdb
00000022 48 23 48K Jul 27 2010 /bdb/AuditingBO/00000022.jdb
00000021 19 44 19K Jul 26 2010 /bdb/AuditingBO/00000021.jdb
00000020 0 0 69 Jul 25 2010 /bdb/AuditingBO/00000020.jdb
0000001f 25 14 26K Jul 24 2010 /bdb/AuditingBO/0000001f.jdb
0000001e 21 40 22K Jul 23 2010 /bdb/AuditingBO/0000001e.jdb
0000001d 77 35 77K Jul 23 2010 /bdb/AuditingBO/0000001d.jdb
0000001c 283 26 283K Jul 22 2010 /bdb/AuditingBO/0000001c.jdb
0000001b 30 40 30K Jul 15 2010 /bdb/AuditingBO/0000001b.jdb
0000001a 53 27 54K Jul 13 2010 /bdb/AuditingBO/0000001a.jdb
00000019 33 43 34K Jul 12 2010 /bdb/AuditingBO/00000019.jdb
00000018 26 18 26K Jul 11 2010 /bdb/AuditingBO/00000018.jdb
00000017 1 41 1.8K Jul 10 2010 /bdb/AuditingBO/00000017.jdb
00000016 34 36 35K Jul 9 2010 /bdb/AuditingBO/00000016.jdb
00000015 164 25 165K Jul 8 2010 /bdb/AuditingBO/00000015.jdb
00000014 98 36 99K Jul 7 2010 /bdb/AuditingBO/00000014.jdb
00000013 112 15 113K Jul 7 2010 /bdb/AuditingBO/00000013.jdb
00000012 39 40 40K Jul 5 2010 /bdb/AuditingBO/00000012.jdb
00000011 16 15 16K Jul 4 2010 /bdb/AuditingBO/00000011.jdb
00000010 1 41 1.2K Jul 3 2010 /bdb/AuditingBO/00000010.jdb
0000000f 59 39 60K Jul 2 2010 /bdb/AuditingBO/0000000f.jdb
0000000e 138 26 138K Jul 1 2010 /bdb/AuditingBO/0000000e.jdb
0000000d 51 37 52K Jun 30 2010 /bdb/AuditingBO/0000000d.jdb
0000000c 79 31 79K Jun 29 2010 /bdb/AuditingBO/0000000c.jdb
0000000b 80 38 80K Jun 28 2010 /bdb/AuditingBO/0000000b.jdb
0000000a 42 23 42K Jun 28 2010 /bdb/AuditingBO/0000000a.jdb
00000009 18 38 18K Jun 26 2010 /bdb/AuditingBO/00000009.jdb
00000008 96 40 96K Jun 25 2010 /bdb/AuditingBO/00000008.jdb
00000007 125 28 125K Jun 24 2010 /bdb/AuditingBO/00000007.jdb
00000006 290 22 290K Jun 24 2010 /bdb/AuditingBO/00000006.jdb
00000005 181 17 181K Jun 22 2010 /bdb/AuditingBO/00000005.jdb
00000004 16 39 16K Jun 21 2010 /bdb/AuditingBO/00000004.jdb
00000003 31 0 31K Jun 20 2010 /bdb/AuditingBO/00000003.jdb
00000002 23 15 24K Jun 20 2010 /bdb/AuditingBO/00000002.jdb
00000001 0 0 69 Jun 20 2010 /bdb/AuditingBO/00000001.jdb
00000000 94 18 95K Jun 20 2010 /bdb/AuditingBO/00000000.jdbWhy there are so many files with 0 size and 0% utilizacion?
Why there are new files when the previous file has not reach 10MB size?
Why there is a 26% of total utilization?
At 00:30 is performed a backup with DbBackup.
Custom JE Properties:
je.maxMemory=134217728
je.maxMemoryPercent=75
je.sharedCache=true
Environment: Solaris 10 + JRE6u17 64 bits + JE 4.1.7
Thanks in advance,
/Cesar.
Why there are so many files with 0 size and 0% utilizacion?The cleaner and checkpointer apparently haven't caught up to cleaning these files, or deleting them at checkpoint time. Take a look at your checkpoints to see when they're happening.
Why there are new files when the previous file has not reach 10MB size?Each backup starts a new file, see DbBackup.startBackup.
Why there is a 26% of total utilization?Apparently you don't have enough cleaner threads or are not doing checkpoints frequently enough. See
http://download.oracle.com/docs/cd/E17277_02/html/GettingStartedGuide/logfilesrevealed.html
Looks like you have a very low write rate. Perhaps checkpoints are not occurring because enough data hasn't yet been written.
--mark
Similar Messages
-
Weird message at log in and now my mail is gone
Hello Apple Family, Last night I bought The Hobbit Extended Edition which had this digital download stuff through Vudu and Ultraviolet. I registered to get my digital download and had to install their software which never did work (and I contacted them).
But this morning I go to log in and my computer is frozen. I manually shut it down and log back in and I get this weird message from Mail about some mailbox needing a name (sorry i didn't screen captre it or write it down :-/. I clicked ok and opned my mail and all my mail was gone except my mail .mac account. Also, all of the archived mailboxes I had aren't showing up. My last time machine backup was Oct. 31st and I can do a restore from that but I'm copying files to my backup disk first which is taking forever.
I wondered if there was another way to restore besides time machine (it looks like mail was the only thing upset that I can tell). I went into my mail settings and started adding my other mail acocunts back in but the archived mail folders I made with literally thousands of emails is still not showing. Any advice is greatly appreciated! Blessings, JenConnect your iPhone or the IDE ice your using to a wall charger. plug the charger into the wall and press and hold the power and home button for 15 seconds. Wait 1 -5 minutes then press and hold the power button for 10 seconds release and you should see the apple logo appear on the screen after about 1 minute your Idevice will got to the lock screen as usual and your problem will be fixed.
-
Hi.
Just trying to add more log members.
In order to DROP logfile group, I need to make sure it is INACTIVE. But each log group is ACTIVE / CURRENT:
SQL> SELECT GROUP#, STATUS FROM V$LOG;
GROUP# STATUS
1 CURRENT
2 ACTIVE
3 ACTIVE
So I added another logfile group to see, and hey presto:
SQL> ALTER DATABASE ADD LOGFILE GROUP 4
2 ('/u02/oradata/=/redo04a.log',
3 '/u02/oradata/redo04b.log',
4 '/u02/oradata/redo04c.log') SIZE 52M;
Database altered.
SQL> SELECT GROUP#, STATUS FROM V$LOG;
GROUP# STATUS
1 CURRENT
2 ACTIVE
3 ACTIVE
4 UNUSED
SQL> alter system switch logfile;
System altered.
SQL> SELECT GROUP#, STATUS FROM V$LOG;
GROUP# STATUS
1 ACTIVE
2 ACTIVE
3 ACTIVE
4 CURRENT
Now again all are being active / current!
How can I drop any of these to get on with my work?
(ie):
ALTER DATABASE DROP LOGFILE GROUP 1;
Re-create the group
ALTER DATABASE ADD LOGFILE GROUP 1
('/u02/oradata/redo05a.log',
'/u02/oradata/redo05b.log') SIZE 50M;
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
LINUX
Thanks in advance,
DA
alter system checkpoint; was the answer!
Edited by: Dan A on Oct 22, 2009 9:59 AMHi,
I tried the same but this doesn't happen to me. Which version of JDeveloper do you use ?
Frank -
Weird behaviour with jsp:forward and jsp:param
I'm running Orion 1.5.3
Wanted to ask if anyone has insight into the following.
I'm trying to do a forward with a parameter. The parameter is something like a message string.
The following does not work.
<%
String result = "unsucessful"; // retrieved from external source... hardcoded for example's sake
%>
<jsp:forward page="<%=nextPage%>">
<jsp:param name="message" value="The result was <%=result%>"/>
</jsp:forward>
I've managed to deduce that the error is in the param value. Apparently, we cannot mix variables with static values inside the value parameter.
I've managed to get it working by doing this...
<%
String result = "unsucessful"; // retrieved from external source... hardcoded for example's sake
String message = "The result was " + result;
%>
<jsp:forward page="<%=nextPage%>">
<jsp:param name="message" value="<%=message%>"/>
</jsp:forward>
My question is, is this a bug or is it supposed to be this way ? Can we mix the value parameters ?Hi Bernard,
Take a note of the following syntax -
<jsp:forward page={"relativeURL" | "<%= expression %>"} >
<jsp:param name="parameterName"
value="{parameterValue | <%= expression %>}" />+
</jsp:forward>
It is evident that either the value attribute can have an expression or simple text.
I have tried your example and I am also encountering the same kind of problem, but I have found a way out.
You can try the following in your code -
<%
String result = "unsucessful"; // retrieved from external source... hardcoded for example's sake
%>
<jsp:forward page="<%=nextPage%>">
<jsp:param name="message" value=' <%= "The result was" + result%>'/>
</jsp:forward>
Instead of using
value= "The result was <%=result%>" you can use
value= '<%= "The result was" + result%>'.
Hope this helps -
Error and weird behaviour in executable launch
Hello folks,
This post is regarding a weird behaviour i am experiencing with an executable i built.
LABVIEW version(Includes Runtime engine) LV2012 SP1 f3
DAQmx: 9.6.1
The behaviour is listed below in detail.
In a nutshell, the exectuable runs on the development computer but does not run on the Target computer. Also, Irresepctive of which PC i run the executable on, i cannot access the block diagram even after enabling debugging everywhere.
On the target PC, the app fires up but does not run further, no error codes appear on the screen, it's like the app freezes after firing up. And to add to the misery, i cannot access the block diagram to debug and know what's going on.
Also, I have tried including the dynamic vis to my build script. No bueno.
What I see on running the app is addressed below:
TARGET COMPUTER:
DAQmx 9.7 and LV2012 SP1 f4 RTE have been installed manually.
App does not run: No broken run button, the app launches but does nothing when the vi is run. No error messages.
The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
DEVELOPMENT COMPUTER:
The app launches and runs perfectly.
The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
DAQmx 9.7 and LV2012 SP1 f4 RTE were not installed as the app recognized the already installed Labview environment.
Additional steps that I have tried,
Created and ran only an executable on the target PC, the attempt was unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section.
Created and ran an installer with additional install options(LV2012 f4 RTE and DAQmx 9.7)on the target PC, the attempt was again unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section. No error messages.
Tried both the steps mentioned above on the development computer and the attempts were successful. .
To the best of my knowledge, I believe, the issue here is with the environment I am creating for the executable and the installer to run with/off of. After having carefully followed the installation procedure for the Run-Time Engine and the DAQmx drivers, I still do not know what I am missing.
Please advise.
Thanks guys,
RP.Hey guys,
So, got the application to work. Almost.
The problem was that the executable was missing the hardware config from the Device.
Now, the new issue is as following:
The goal of the vi is to generate a report of the test conducted. So, the way the vi works is that, the second the vi is run, an empty word file is created with only the company logo,
Field headings, which are populated after the test is conducted.
The logo is a .jpg file, which has a relative path into the executable.
The field heading are String constants wired into a 'concatenate strings.vi' which are in turn wired to into the report generation vis.
What's happening is that when i run the app on the target pc, Only the logo appears on the word template. Even when i conduct the whole test and stop the vi, the results aren't populated in the word file. Which is a little weird.
Does any one know whats doing that?
Please refer to the attached word files.
Right - It is the file format desired.
Wrong - It is the file format achieved.
Please advise.
Thanks,
RP.
Attachments:
Right.docx 17 KB
Wrong.docx 16 KB -
Hallo everyone,
We are installing Personas and facing several challenges.
Personas 2 SP02 was installed according to instructions of Note '1848339 - Installation and Upgrade note for Personas' and configured according to the Config Guide v1.3 (rel. May 2014). The referenced notes were also applied as well as the 'How to config - FAQ' blog by Sushant.
We are able to log on and execute transactions and perform activities successfully (e.g. SE80, SPRO, KB15, etc.).
When trying to copy a screen the following error appears: 'An unexpected behaviour has been detected and you have been disconnected - please log in again.'
Thereafter one can simply continue executing transactions without having to log in again.
Please see the download of the error attached as per blog: SAP Screen Personas Support Tips – client side logging
The HAR is unfortunately too large to attach. Are there any alternatives?
Thank you in advance for you assistance!
Kind regards,
Daniel
Message was edited by: Daniel KHi,
I have never worked on SAP PERSONA but you can try below things
1)try to use different user or J2ee_admin since it might be same user multiple session case
2) Try with different browser since plugins can behave unexpectedly
3)Make entry in host file also
4) check dev_icm logs
5) check on ABAP side for dumps in ST22
Warm Regards,
Sumit -
One day I just went on my iPod on messages and the log in sign showed up I tried logging in and it just brought me all the way back it is the same with FaceTime please help!
Try:
iOS: Troubleshooting FaceTime and iMessage activation -
Mail / Exchange 2013 weird behaviour?
I’m hoping someone here can help with weird behaviour from Mail which is driving me nuts. It doesn’t appear to be the same problem as the odd Exchange behaviour described in other threads. It appeared about a month back, and I had made no changes to my software or hardware at that time.
I have the latest version of OSX Mail in Mavericks, set up with an Exchange 2013 and iCloud mail accounts. There are no extensions or add-ons running. I have two Macs and two iOS devices on these accounts, all fully updated. The problems exist regardless of which devices are powered up at any one time. Mail is set to download messages automatically.
On both of the Macs I get the same following problems:
- When new messages arrive, the mailbox notifier indicates the new messages, but they are not shown in the message list. If I select the ‘Exchange’ inbox they are visible, and remain so when I switch back to the combined ‘Inbox’.
- When I select the ‘Exchange’ inbox, rather than the combined ‘Inbox,’ then after 30 seconds or so the ‘From’ field in the message list changes to ‘To’, so all the senders are shown as my email address.
- The entire send/receive function seizes up half a dozen times a day, necessitating a Force Quit to restart the app.
iOS devices work just fine.
Is this in fact the same as the reported Exchange problems, or have I got something else going wrong here? I’ve tried deleting and recreating the account, and also had my hosted Exchange provider take a look, to no avail.
Many thanks,
TobesHi Ivan,
It is really an odd issue. Working for a while, then crash.
According to your description, I found that we suspect it is a certificate issue.
If this issue really related to the certifcate mismatch or something additional, it shouldn't connect to Exchange server, even just for a while (As we
encountered).
I suggest double check our ECP VD configuration and Authentication method. Steps as below:
1. Please try to re-build ECP Virtual Directory, commands as below:
a. To remove current ECP VD:
Remove-EcpVirtualDirectory -Identity "Server01\ecp (default Web site)"
b. To check whether the Remove operation completed successfully:
Get-EcpVirtualDirectory -Server Server01
c. To create a new ECP VD:
New-EcpVirtualDirectory -Server SERVER01 -ExternalURL https://mail.contoso.com/ecp -InternalURL
https://mail.contoso.com/ecp
2. Please verify that the Microsoft Forms Based Authentication service is running on all Exchange servers.
a. To check:
Get-EcpVirtualDirectory -Server <server name> | fl *auth*
b. To enable:
Set-EcpVirtualDirectory -Identity "Server01\ecp (default Web site)" -FormsAuthentication
$true
3. Please also make sure the remote apps are all installing the trusted certificate.
4. Please also collect detailed App logs or error message in event viewer for the further troubleshooting.
Maybe I have not enough experiences, I am not sure whether the logs above that we provided is useful. Maybe others have different opinions.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?
Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
File-to-file or File-to-RFC for Automatic PO creation and GR creation
Hi,
We are on XI 3.0 and the following has been put to me:
We will receive a .CSV file from FTP server, into XI and then need to create Purchase Orders followed by the Goods Receipt documents in R/3 based on the incoming data.
Further to this, the requirement is to give a log of the successfule and failed PO + GR document summary to the business.
The programme in R/3 will compare the incoming file nmame with archived files already processed and will reject any files with duplicate names.
I was suggesting to go with the file to RFC in R/3 whereby we can have a Z shell BAPI to include the standard BAPI for PO creation and GR creation. This Z code can then be extended to email the log to the business of which records were successfully created and which failed.
However, I am stumped as to how can I make the file duplication comparison on R/3 as the incoming file will also be stored on R/3 archive somewhere.
Can this be made when the BAPI is called in XI?
I can configure alerts when the BAPI is mapped from incoming file for that interface.
What was suggested also was to pick up the CSV file and thow it as it is in R/3 and then the Z code can go through it and create the PO and GR objects. However, then it does not make much sense to use XI as the middleware platform.
Please advice.
Regards,
ArcahnaHi Archana,
Take a look to this blog:
https://wiki.sdn.sap.com/wiki/display/XI/Different%20ways%20to%20keep%20your%20Interface%20from%20processing%20duplicate%20files
Maybe it could help you for the duplicate files.
Regards,
Juan -
Background job fails for BDC profile creation and role assignment
Hi Experts,
I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
Below is the process of job
1. ZMIS_AUTH_OBJECT_CREATE
Variant : auth-create
2. ZMIS_AUTH_ASSIGN_TO_ROLE
Variant : auth-assign
The problem is in second program, runs in foreground but fails in background.
Code which i have written in my second program
***BDC for Profile creation and assignment to Roles
CALL FUNCTION 'ZROLE'
EXPORTING
ctu = 'X'
mode = p_mode
UPDATE = 'L'
* GROUP =
* USER =
* KEEP =
* HOLDDATE =
nodata = '/'
agr_name_neu_001 = wa_role-role_name
text_002 = wa_role-desc
text_003 = wa_role-desc
text_004 = wa_role-desc
value_01_005 = 'T-ML330881'
h_fval_low_01_006 = wa_role-auth
profn_007 = lv_profile
ptext_008 = lv_text1
* IMPORTING
* SUBRC =
TABLES
messtab = temp_message.
***Generation of Profile created
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
EXPORTING
activity_group = wa_role-role_name
* PROFILE_NAME =
* PROFILE_TEXT =
no_dialog = ' '
rebuild_auth_data = ''
org_levels_with_star = ' '
fill_empty_fields_with_star = 'X'
template = ' '
check_profgen_tables = 'X'
generate_profile = 'X'
authority_check_pfcg = 'X'
EXCEPTIONS
activity_group_does_not_exist = 1
activity_group_enqueued = 2
profile_name_exists = 3
profile_not_in_namespace = 4
no_auth_for_prof_creation = 5
no_auth_for_role_change = 6
no_auth_for_auth_maint = 7
no_auth_for_gen = 8
no_auths = 9
open_auths = 10
too_many_auths = 11
profgen_tables_not_updated = 12
error_when_generating_profile = 13
OTHERS = 14 .
Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
Regards,
ChetanHi Praveen,
Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
To achieve this i have written two programs
1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
"" Creation of Authorization Object
CALL FUNCTION 'ZAUTHOBJ'
EXPORTING
ctu = 'X'
mode = p_mode
UPDATE = 'L'
* GROUP =
* USER =
* KEEP =
* HOLDDATE =
nodata = '/'
g_authname_001 = 'ZDUMMY_MIS'
g_targetauth_002 = wa_tab-auth
g_authtxt_003 = wa_tab-short_desc
g_authtxtmd_004 = wa_tab-med_desc
marked_04_005 = 'X'
g_authtxt_006 = wa_tab-short_desc
g_authtxtmd_007 = wa_tab-med_desc
tctiobjnm_04_008 = 'ZBUS_UNIT'
g_authtxt_009 = wa_tab-short_desc
g_authtxtmd_010 = wa_tab-med_desc
marked_05_011 = ''
opt_01_012 = 'EQ'
low_01_013 = wa_tab-bu
g_authtxt_014 = wa_tab-short_desc
g_authtxtmd_015 = wa_tab-med_desc
marked_04_016 = 'X'
g_authtxt_017 = wa_tab-short_desc
g_authtxtmd_018 = wa_tab-med_desc
tctiobjnm_04_019 = 'ZCONTRCT'
g_authtxt_020 = wa_tab-short_desc
g_authtxtmd_021 = wa_tab-med_desc
marked_05_022 = ''
opt_01_023 = 'EQ'
low_01_024 = lv_contract
g_authtxt_025 = wa_tab-short_desc
g_authtxtmd_026 = wa_tab-med_desc
g_authtxt_027 = wa_tab-short_desc
g_authtxtmd_028 = wa_tab-med_desc
g_authname_029 = wa_tab-auth
* IMPORTING
* SUBRC =
TABLES
messtab = temp_message.
"" Creation of role
LOOP AT it_role INTO wa_role.
CLEAR wa_text.
wa_text-text = wa_role-desc.
wa_text-langu = 'E'.
APPEND wa_text TO it_text.
wa_jobrole-agr_name = wa_role-role_name.
wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
wa_method-usmethod = 'CHANGE'.
CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
EXPORTING
jobrole = wa_jobrole
parent = wa_parentrole
method = wa_method
TABLES
* RETURN =
shorttext = it_text
* LONGTEXT =
* MENU_NODES =
* MENU_TEXTS =.
ENDLOOP.
2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
""*BDC for Profile creation and assignment to Roles
CALL FUNCTION 'ZROLE'
EXPORTING
ctu = 'X'
mode = p_mode
UPDATE = 'L'
* GROUP =
* USER =
* KEEP =
* HOLDDATE =
nodata = '/'
agr_name_neu_001 = wa_role-role_name
text_002 = wa_role-desc
text_003 = wa_role-desc
text_004 = wa_role-desc
value_01_005 = 'T-ML330881'
h_fval_low_01_006 = wa_role-auth
profn_007 = lv_profile
ptext_008 = lv_text1
* IMPORTING
* SUBRC =
TABLES
messtab = temp_message .
COMMIT WORK AND WAIT.
""*Generation of Profile created
LOOP AT it_role INTO wa_role.
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
EXPORTING
activity_group = wa_role-role_name
* PROFILE_NAME =
* PROFILE_TEXT =
no_dialog = ' '
rebuild_auth_data = ''
org_levels_with_star = ' '
fill_empty_fields_with_star = 'X'
template = ' '
check_profgen_tables = 'X'
generate_profile = 'X'
authority_check_pfcg = 'X'
EXCEPTIONS
activity_group_does_not_exist = 1
activity_group_enqueued = 2
profile_name_exists = 3
profile_not_in_namespace = 4
no_auth_for_prof_creation = 5
no_auth_for_role_change = 6
no_auth_for_auth_maint = 7
no_auth_for_gen = 8
no_auths = 9
open_auths = 10
too_many_auths = 11
profgen_tables_not_updated = 12
error_when_generating_profile = 13
OTHERS = 14
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
Regards,
Chetan -
Mobile Account Creation and old topic
http://discussions.apple.com/thread.jspa?threadID=1786733&tstart=1 -- This was never successfully answered and has been archived and marked as so?
The problem it turns out, is that Leopard doesn't seemingly like the AD user's home folder location. I've verified this still as an issue today, on 10.5.7. I tried to create a mobile account for a user on a new laptop i got -- it would prompt me for the password three times, saying it's incorrect each time before the account creation is canceled.
If in Server 03 AD tools you first switch that user's "Home Directory" to local (or a mac server), this issue will not persist. On the AD Binding/Directory utility un-check "Require Confirmation" before creating a mobile account.
Then you should be able to log out and login as the user (may have to first delete the user's local directory if one has been created under "Users"), so long as the Home folder is set in AD to a location that is seemingly 'agreeable' with the mac os.
Message was edited by: Oh4Sh0The usual approach with Open Directory is to either use Workgroup Manager to define a managed login preference for a computer group to define that those member computers should cause the use of mobile accounts on those computers, or to do the same thing via Profile Manager.
Note: If you are using Mavericks you must use Profile Manager as it does not support this via Workgroup Manager managed preferences.
This will not require users to need admin authorisation. -
I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no luck.
This has nothing to do with your pictures. As long as LR works, nothing happens. The CC app merely has lost an entry in the installer database. Would a reinstall fix it? Sure. Is it necessary? Not really (until the next version or update). So unless you have too much time to spend or something isn't working, I'm sure you can find more interesting things to do with your tiem. Otherwise use the cleaner tool and get to it:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
How to trigger an Idoc from Sales order creation and change
We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad DixitHi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj -
Well, lucky me: I picked up in garage sale $99.00 iMac G3, Graphite version. NO DISKs. And it had 9.1 on it. Also CD burder. Great for kids.
I took advice on this board and picked up an Mac OS 9.2.1 disk (white, with the big gold '9') on it. I sucessfully upgraded to 9.2.1. Next thing, I guess, is get to highest version of 9.2.?? (which I could maybe use some help with if anyone can point me to link here).
BUT MY Q: I could not figure out how to use the 9.2.1 disk to do a complete clean resintall of the HD. Do I need something else? I wish to erase all the prev. owners stuff, and start with a minty fresh and clean HD, with 9.2.X.
how to do??
AND: if I do this, will it include a browser so I can log on? It occured to me, that a totally clean install might leave me with no applications to get on the web!
JonHi, Jon -
Q: I could not figure out how to use the 9.2.1 disk to do a complete clean resintall of the HD. Do I need something else? I wish to erase all the prev. owners stuff, and start with a minty fresh and clean HD, with 9.2.X.
Provided that disk is a full-install disk (there were a few OS 9.2.1 update-only disks shipped with white labels & gold 9 - as I recall, those came with one of the early retail OSX packages, perhaps OSX 10.1) you should be able to do that.
The full-install retail OS 9.2.1 Install CD (in North American English) has an Apple part number of 691-3334-A - that number can be found underneath the text block on the left side of the label.
To do a thorough erase of the drive -
Boot to the CD (insert it, restart, immediately press the C key, keep it held down until you know it has started to boot to the CD; be patient - it takes a lot longer to boot to a CD than to a hard drive). Then run Drive Setup - it can be found in the Utilities folder on the CD. Select zero-all-data from the Initialization Options item in the Functions menu, then click the Initialize button.
This will take a while - about one hour per each 10GB of drive size.
Select Mac OS Extended as the format when asked.
Using Drive Setup
To install the OS -
After the drive has been wiped, and while still booted to the CD, run the installer program on the CD - Mac OS Install. Follow the prompts and accept the default installation.
<hr>
If you do not want to erase everything on the drive, you can do a Clean Install of just the OS instead. A Clean Install will remove nothing; it will install a brand new, 'clean' System Folder, will rename the old one to Previous System Folder, and (in this instance) will not do much else.
Article #58176 - Mac OS 8, Mac OS 9: Performing a Clean Installation
Maybe you are looking for
-
Prioritizing of messages in PI 7.0 SP6
Hi all When we are recieving messages from the server it is sending the messages to the other end Correctly. But the problem we are facing is, the meessages are not sent in the order they are recieved (FIFO), But they are are randomly processed. PLea
-
New "delete" button with most recent firmware
Hi After downloading the most recent iPhone update, 4.1 i believe, I received an email which I read n my phone, and when I was finished, I pressed the icon which is where the dustbin icon used to be. I assume that this sends emails to trash, but when
-
Do we have to use the touch ID for the iPhone 5?
I'm trying to decide which iphone i should get, and it's being rumored that the iphone 5 doesnt sell anymore. So i'm wondering if the touch id on the 5s HAS to be used.
-
Indicaticator Relevant for BW in Infopackage
When does this indicator have to be set after creating the infopackage?
-
Arrêt abonnement ICLOUD problème pour ouvrir un PDF
Bonjour, j'ai arrêté mon abonnement ICLOUD, et du coup dès que je veux ouvrir un PDF, ICLOUD m'envoie une invite à renouveler mon abonnement alors que je possédais déjà Acrobat X sur mon ordinateur. du coup je n'arrive plus à ouvrir un document PDF E