Weird: cannot process atom feed, because server return 200

I submitted an atom feed to newsstand, and the second day I found this in my inbox.
Does anyone know what is going on? Server returns 200 should mean "OK"…

Thanks, I checked the URL and the data, no problem was found so far…
And I also tailed the server log, turns out that only some of the data were visited. My server is in China, so it looks more like an «operation time out» now.
Now I'm putting those data on a server based in US, hopefully it will work.

Similar Messages

ITunesU cannot update atom feed

Hi: Running Podcast Producer 2 in a Snow Leopard machine, and the Podcast Library is stored on the same computer. Without any changes, we are getting the bellow messages for all of ours atom feeds on iTunesU.
Is anyone else experiencing the same problems.
I can access the Podcast Producer library from a public computer and all content is there. For whatever reason, iTunesU don't seem to be able to update.
Thanks,
Dear iTunes U administrator, instructor, or course manager,
Your 'CLASS OF 2014 FALL SEMESTER 2010' course in your umich.edu iTunes U site populates its track list automatically from an Atom feed, based on the podcast Atom feed URL and details you specified. iTunes U encountered the following error while trying to access the podcast Atom feed:
iTunes U could not update the content because iTunes U could not download the specified feed (http://servername.x.x.x.x:8171/podcastproducer/atomfeeds/730B3E46-7282-4E53-A349-8897412A9535). Until the issue is resolved, iTunes U continues to display the last downloadable version of the content. Verify that the feed specified in the feed URL field and the resource are available, and then try again.
To check your iTunes U podcast Atom feed URL and details, Atom Feed Settings located at Michigan > Schools and Colleges > Dental School > Dental Students > Class of 2014 > CLASS OF 2014 FALL SEMESTER 2010.
Sincerely,
The iTunes U Team

We're getting this message as well, but it's from an RSS feed, not an atom feed. See below.
As far as I know, this happens when iTunes U tries to refresh a feed, but encounters a timeout getting the new RSS/Atom XML document.
I'd love to know if we can suppress these notices, if they are just a notification. Our faculty get these emails because we add their email when we register their RSS feed in iTunes U.
Anyone have any ideas?
Dear iTunes U administrator, instructor, or course manager,
Your 'Swahili - Journals' course in your indiana-public iTunes U site populates its 'Feed' group track list automatically from an RSS feed, based on the podcast RSS feed URL and details you specified. iTunes U encountered the following error while trying to access the podcast RSS feed:
iTunes U could not update the content because iTunes U could not download the specified feed (https://deimos.apple.com/WebObjects/Core.woa/Feed/indiana.edu.2945205213.0294520 5222/[email protected]/004b2663f4213d4e468bf00d735d7d0f628f10b8c80d118f7a5470ace 59f1f658821275071). Until the issue is resolved, iTunes U continues to display the last downloadable version of the content. Verify that the feed specified in the feed URL field and the resource are available, and then try again.
To check your iTunes U podcast RSS feed URL and details, edit your Course page group located at Indiana University > CATEGORIES > Education > Education > Swahili - Journals > Feed.
Sincerely,
The iTunes U Team

CFIMAGE captcha issue - Cannot find /CFFileServlet, possibly because server and webroot are on different drives

CFIMAGE captcha was working on my DEV system, where the wwwroot is in the same folder as CFServer is installed.
It is NOT working when I move it to staging, which is identical to production - including the fact that CFServer is on D: drive, but wwwroot is on E: drive.
Is there a way to map a location for the CFFileServlet folder? I think this is the reason it isn't working in staging.
V/r,
^_^

May want to check your web server to be sure it's not Denying access to that folder based URL Request filtering. Part of the ColdFusion lockdown guide recommends to Deny access to this folder unless you use CFImage, CFChart, CFPresentation, or CFReport.
Page 30 here:
http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf11/cf11-lockdown-guid e.pdf

Ace http response code seeing 500, but server returning 200

we have an http probe configure like below,the real is failing probe, and the ace says it's returning a 500 response code,however when i browse to the server from my laptop, i get a 200, and the correct regex ( going to http://172.19.254.51/operation.aspx) . Is it possible the server could send a different response code to ace?
probe http HTTP
interval 5
passdetect interval 5
receive 3
request method get url /operation.aspx
expect status 200 200
open 2
expect regex "operation"
serverfarm host AMS_AI
probe HTTP
rserver server1
    inservice
rserver server2
    inservice
rserver server3
    inservice
show probe HTTP detail
     real      : server3I[0]
                       172.19.254.51   1925172    24779      1900393    FAILED
   Socket state        : CLOSED
   No. Passed states   : 5646         No. Failed states : 5646
   No. Probes skipped : 0         Last status code : 500
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : Received invalid status code
   Last probe time     : Wed Feb 23 10:53:21 2011
   Last fail time      : Wed Feb 23 09:21:29 2011
   Last active time    : Wed Feb 23 03:51:41 2011

you will probably have to configure the HTTP header of the probe you send. Maybe the web server
is expecting specific fields (virtual hosts ?)

For no apparent reason my iPad cannot open the page because the server stop responding. however my husband and daughters ipads connect with no problem!!!! why is it so........

For no apparent reason my ipad will not connect to the internet. Ammessage "safari cannot open this page because server has stopped responding. However 2 other ipads used in the same house are working fine !!!!! Why is it so ???? please help

Try a soft reset by pressing down the home and sleep buttons simultaneousely until the Apple logo appears, then release the buttons. This is a safe proceedure, so you won't lose any stored data.

The process cannot access the file because it is being used by another proc

We are exporting crystal reports into PDF using ExportToHttpResponse (code snippet below)
      // Getting the type of the report file which has been selected by the user. (which will be REPORT CLASS type)
Type objType = Type.GetType("WebApplication1.Reports." + ReportName);
ReportClass SEPREport = (ReportClass)Activator.CreateInstance(objType);
// GetTypedDataSet()returns an instance of typed data set.
SEPREport.SetDataSource(GetTypedDataSet());
SEPREport.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, true, ReportName );
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0.
Now on our machines, we have never experienced any issues.
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
The process cannot access the file because it is being used by another process. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The process cannot access the file because it is being used by another process.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): The process cannot access the file because it is being used by another process.
   CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
   CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +525
   CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +681
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +105
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +163
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +132
   MSSB.FATools.UI.PlannerReport.CreatePDFDocument() +732
   MSSB.FATools.UI.PlannerReport.btnCreatePDF_Click(Object sender, EventArgs e) +45
   System.Web.UI.WebControls.Button.OnClick(EventArgs e) +104
   System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
   System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
   System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
   System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5615

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Server 2008R2 - Windows cannot log you on because your profile cannot be loaded

Hi guys.
I have a server SEXXX01 - Windows 2008 R2 OS.
Im having major issues to login to this server.
This was reveled when a person tried to login to the server and got the error "Cannot log you in, unable to load profile"
What we did was to remove the account, completly, we did this manually aswell(not very smart I know).
We also removed the registy profile.
But. Now no new accounts can be made to login. The old "local accounts" can still login, but no new ones.
You cant even create a new user in AD, add that user to the server. It still gives the same error.
I have an admin account that still is avaible to login. But no other accounts are able to.
When I create a new account, no folders are created, no register path is created.
The weird part is that I created a temp-admin account on the server and it worked for a little while yesterday, out of the blue(no changed were made). But now its back to not working again
This is what I have done so far:
I have checked the register for S-I-D numbers that might be faulty, but there are none for the new accounts that are made or for the original account that failed.
Tried to add new accounts as administrators, still the same problem.
checked if there is a problem with the "default user" folders, none at all.
Added, removed, changed the rights for the accounts.
Looked at the local GPO, nothing weird
This is the error msgs I get from the event viewer:
event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - The system cannot find the file specified.
Event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - System could not allocate the required space in a registry log.
Event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Insufficient system resources exist to complete the requested service.
Event ID: 1508
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - Insufficient system resources exist to complete the requested service.
for C:\Users\XXXXX\ntuser.dat
The errors with the system resources seems weird. The server has 16GB of ram and not even 30% is used at this time.
So what could it be?
Why doesnt the server created user folders/registery files for new users?
Why does it give error about resources allocation, when it has more then enough?
Im just at the dead end. I have no idea how to proceed.
All help is very appriciated.
Regards
Me

See if any of the suggestions discussed in similar thread helps
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-windows-cannot-log-you-on-because-your/e30ad127-d9fd-48b1-b1e9-f2b60b01167f
I have unmarked your previous post as an answer since issue still persists.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.

Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Backup stopped before completing. The process cannot access the file because it is being used by another process

I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..Michael

I am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '‎2011‎-‎03‎-‎25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure

Move-item: The process cannot access the file because it is being used by another process.

Hey,
I have a powershell script where I first use Get-childitem to receive a number of files.
Then I do some stuff with it and try to move the file afterwards.
Unfortunately if I am using a lot of files I receive very often the error:
The process cannot access the file because it is being used by another process.
Even -Force parameter does not help further.
Based on my look around it is not used by another process.
I think it is still 'in use' by powershell from script commands previously.
Is there any way to 'see' if the file is still in use currently and wait for this to end?
Or can I 'close' the current usage of the file?
Thank you :)

Hey,
Thank you.
I build the following function.
But either the $return = $true I receive "The process cannot access the file because it is being used by another process." when I try to move-item... :(
Function Wait-FileUnlock($FilePath){
Write-Host " "
$FileInfo = New-Object System.IO.FileInfo $($FilePath)
DO{
try{
$fileStream = $fileInfo.Open([System.IO.FileMode]::Open, [System.IO.FileAccess]::Read, [System.IO.FileShare]::Read)
$return = $true
catch{
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
$return = $false
While($return -ne $true)
$Error
return $return
Another functions is:
Function Wait-FileUnlock($FilePath){
Write-Host " "
DO{
$Error.Clear()
Rename-Item $FilePath $FilePath -ErrorAction SilentlyContinue | Out-Null
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
While($Error.Count -ne 0)
This one waits .. but it seems not to end waiting at any time :(

The process cannot access the file because it is being used by another process with Execute package task

Hi,
I've a master package that calls other packages with an Execute Package Task. Sometimes we have an error: "The process cannot access the file because it is being used by another process" and sometimes not. It seems random.
We are working on a Terminal Server and the SQL Server database engine and the files are placed on another server. It seems that the errors doesn't occu when we run the packages on the server with a job. We can't log onto the windows server on this machine..
Hennie

I've seen this myself. On most occasions an immediate rerun would fix the issue. As stated this happens only when we try to run this from BIDs. From SQL agent job it always runs fine.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Cannot open page Safari cannot open the page because it could not establish a secure connection to the server

Hello Apple Experts!!
I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
This is happening only on the OS 5 and on the OS 4 everything works just great!!
I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
Any help on the same will be much appreciated!!
Regards
Surendra

I'm having a similar issue. Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
I checked the ciphers enabled by their page, and this was returned:
High Strength Ciphers (>= 112-bit key)
    SSLv3
      EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1
      DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1
      RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5
      RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1
    TLSv1
      EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1
      DHE-RSA-AES128-SHA         Kx=DH         Au=RSA     Enc=AES(128)     Mac=SHA1
      DHE-RSA-AES256-SHA         Kx=DH         Au=RSA     Enc=AES(256)     Mac=SHA1
      n/a                        Kx=DH         Au=RSA     Enc=Camellia(128) Mac=SHA1
      n/a                        Kx=DH         Au=RSA     Enc=Camellia(256) Mac=SHA1
      DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1
      AES128-SHA                 Kx=RSA        Au=RSA     Enc=AES(128)     Mac=SHA1
      AES256-SHA                 Kx=RSA        Au=RSA     Enc=AES(256)     Mac=SHA1
      n/a                        Kx=RSA        Au=RSA     Enc=Camellia(128) Mac=SHA1
      n/a                        Kx=RSA        Au=RSA     Enc=Camellia(256) Mac=SHA1
      RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5
      RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1
This appeared to be a more than sufficient cipher list, yet my iPad won't load any page. I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
Any ideas?

Windows Server 2008 Server Manager - The WinRM Client Cannot Process the Request.

Hello,
I have recently purchased a Dedicated Server, and I have installed Windows Server 2008 R2. I want to use Server Manager because I don't really have that much experience with command line commands, so I wanted to use server manager, I can remotely connect
to my server but when I use Server Manager I get the error "The WinRM Client Cannot Process the Request, if the authentication scheme is different from Kerberos..." I haven't set up a domain between my PC and the Dedi, as I do not know how/or know
if this is applicable in this situation.
Thanks for your time!
Bill Gates Mate

Hi,
If you are using the non-domain management method, please refer the following article to add the trust host.
The related article:
Remoting Week: Non-Domain Remoting
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/29/remoting-week-non-domain-remoting.aspx
More third party article:
The WinRM client cannot process the request. If the authentication scheme is different
http://technico.qnownow.com/the-winrm-client-cannot-process-the-request-if-the-authentication-scheme-is-different/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

Hello Beckieor,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
iOS: Troubleshooting Wi-Fi networks and connections
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Safari cannot open the page because the server cannot be found

Trying to open Outlook Webmail App from Ipad 2 and am receiving the Error Message "Safari cannot open the page because the server cannot be found.
I have tried resetting my ipad 2 to no avail. Internet connection is working and am able to get into other apps/sites. Read older posting that this could be a DNS issues???
Help?

The only other thing I can think of is to try a device reset (be sure and also close off all running apps beforehand):
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Weird: cannot process atom feed, because server return 200

Similar Messages

Maybe you are looking for