Weird problem: different layer sizes

This is not the first time I encountered this problem but here it goes again:
I have copied one layer several times and applied different filters. I turned on fixed resolution and had temporarily grouped and ungrouped three of the layers. When I added a fourth one and tried to export, the last one appears slightly bigger and off centre... Any explanation for this.
I solved the problem by importing the whole thing into FCE and exporting the movie there - just interested what causes this weirdness...

See this thread:
http://forums.adobe.com/message/3905911#3905911
"There is an issue with Encore layer breaks so most probably this is what is causing the problem.In some cases Encore places an extra chapter on the timeline at the place where the layer break occurs.This causes subsequent chapters to be incremented by 1."
The original poster in that thread fixed the problem (which may not be precisely your problem) by putting the manual layer break on one of his chapters.

Similar Messages

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

AP Divs (layers) move when I open my website on different window size.

First of all, this is my first time trying to make a website.
I'm doing an assignment for my class and i found it difficult for me to fix. I have spend 4-5 hours researching online but nothing work for me.
Well,the problem is the AP Divs (layers) move when I open my website on different window size(iphone,ipad).
The website only look right on 1366 x 786 resolution. Please take a look at my 2 pics below:
And I don't know how to make the website to fit on the iphone and ipad so that I don't have to scroll down or sroll to the right to view the whole thing.
Please someone help me!
The code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="viewport" content="width=device-width" />
<title>Boston Green Community College</title>
<style type="text/css">

</style></head>
<body>
<div class="container">
<div class="header"><a href="#"><img src="Pictures/34d-1.png" alt="Insert Logo Here" name="Insert_logo" width="619" height="90" id="Insert_logo" style="background-color: #C6D580; display:block;" />
    <div id="apDiv11"><font color="#f4f1f1">
<script type="text/javascript">
var d=new Date()
var weekday=new Array("Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday")
var monthname=new Array("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec")
document.write(weekday[d.getDay()] + " ")
document.write(d.getDate() + ". ")
document.write(monthname[d.getMonth()] + " ")
document.write(d.getFullYear())
</script></font>
</div>
    <div id="apDiv1">


<form name="cse" id="searchbox_demo" action="http://www.google.com/cse">
<input type="hidden" name="cref" value="" />
<input type="hidden" name="ie" value="utf-8" />
<input type="hidden" name="hl" value="" />
<input name="q" type="text" size="40" />
<input type="submit" name="sa" value="Search" />
</form>
<script type="text/javascript" src="http://www.google.com/cse/tools/onthefly?form=searchbox_demo&lang="></script>
                              </div>
                                </div>
<div class="content">
    <center><img src="Pictures/DFDF11.png" width="959" height="556" longdesc="Pictures/junior-2-960x.jpg" /></h1></center>
</div>
<div class="footer">
     <img src="Pictures/RRR1.png" width="202" height="70" />
     <div id="apDiv3">
       <p> </p>
       <p><a href="Job.html">Jobs</a>         </p>
       <p><a href="Art Gallery.html">Art Gallery</a>         </p>
       <p><a href="Contact us.html">Contact Us </a></p>
    </div>
    <div id="apDiv4"><center>
<P>About</P>
<a href="visiting.html">visiting</a> | <a href="Map.html">maps </a>| <P><a href="About.html">about BGCC</a></P>
<P>Academic</P>
<P><a href="Courses.html">schools+courses</a></P>
<P>Admissions </P>
<P><a href="cost & aid basics.html">cost & aid basics </a>| <a href="Apply now.html">join BGCC</a>
<P>Studen Life</P>
<P><a href="Athletics.html">Athletics</a></P>
<P>Greenforce Education</P>
<P><a href="Career.html">career center</a></P>
</center> </div>
     <p><font size="2" color="black">BGCC | 99 GreenField | Boston, MA 02199 |617-0101-1000| TTY 617-0202-9944|</font></p>
    <div id="apDiv9"><a href="Donate.html" target="_blank"><a href="Donate.html"><img src="Pictures/three-green-logo.jpg" width="218" height="99" longdesc="Pictures/three-green-logo.jpg" /></div>
    <div id="apDiv8"><a href="Apply now.html" target="_blank"><a href="Apply now.html">
<img border="0" src="Pictures/cxgvxdvxgd.jpg" alt="Apply Now" width="218" height="99"></a></div>
</div>
</div>
</body>
</html>

That's what APDivs do. This is the single most common problem new people have with web page layouts. DO NOT use positioning. You don't need it. Start over. Learn to use CSS floats, margins and padding to align elements.
Below is a basic HTML5 Layout. View source in browser to see the code.
http://www.alt-web.com/sandbox/HTML5-BasicLayout.html
Nancy O.

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

How do I create a PDF document with multiple different page sizes?

I scan tif images and can have a single document with Letter, Legal, Tabloid, and even full map plan sizes (36" X 24") all in one document. I get the document all set, then do a: File, Print, choose Adobe PDF (running Acrobat XI Pro), but it converts all the pages in my tif file to a single size.
I've found where to set the size, but the problem is I have many different sizes. Is there a way to have the Adobe PDF printer, just use the original documents page sizes for each page when converting?

The program I use to create the TIF files (OpenText's eDOCS Imaging) does not make PDFs, it makes TIFs (and TIFFs). To then convert this, if I try to do it through Adobe directly, I get an error which prompts me to open it in the native program and to choose print and then select the adobe printer.
This works perfect if every page is the same size, but many times my documents have many different page sizes as well as portrait and landscape within the same document (but that is a separate option).
Doesn't Adobe have a "use the original page size / orientation" as an option when creating PDFs from existing documents?

Creation of PDF with different page sizes

I am generating PDF using Acrobat Distiller from my application from the .ps file. From one machine, the PDF is generated with different page sizes.one page with 8.5*12.99 and other pages with 8.5*11 in the same PDF. However the PDF is created with correct page sizes for all the pages in another machine. The only difference between the machines is the Internet Explorer version. I am using Internet explorere 11.0 and the other machine have a version of 8.0 installed.
Why the difference in page size occured? Is there any dependency on the Internet explorer used while creating the PDF using Distiller? Any help for the issue with the discrepancy in the page sizes is really appreciated.
Thanks!

Acrobat Distiller uses the page size in the PS file. May be a problem of your application which create the PS file.

CS5 Image Processor - One script, different image sizes and save locations

Hello guys!
is it possible to make one script to convert several images to different image sizes which should be saved in different locations?
The xml structure is clear, but photoshop accepts only the second "script" if i load a test xml file with two scripts in it.
Thanks a lot !!!
Best Regards,
Tobias

Hey!
i solved the problem with an action in which i changed the picture size 4 times (4 times saving for web included)
its perfect for my needs!
thanks anyway

Bubble chart with scatter chart type and different bubble sizes

Hello everybody,
I would like to create a bubble chart (scatter chart) within Oracle 11g and Apex 4.2 with the standard chart types that come with Apex (anychart).
I want to integrate two different KPIs (key performance indicators) in the chart, one for each axis (x and y) and additionally the size of the bubbles shall represent the size of the company, the KPIs belong to.
That is to say, every bubble represents a company with two KPIs and its size.
Now, I have problems changing the size of the bubbles. Can someone give me a hint where to start or how I could achieve this with a standard sql query (series) !?
Is that possible with the standard charts (scatter type)?
Can I control the color of the bubbles?
How can I control the starting and ending points of the axes in order to show all bubbles completely even if they are e.g. 0,0 (x,y) (this would show only a quarter of the bubble) or 0,3 (which would show only half of the bubble).
I will be very thankful for some hints.
Thank you very much in advance.
Johnny

Go to any chart and look at the examples. You can view the xml, there are bubble chart examples.
AnyChart - Cross-Platform Flash Charting Solutions For Your Project

Different Text Size for different mobile devices and Tabbed View Application

Hi,
I am developing an sample mobile application to target all mobile devices (IPhone/IPad/IPod and Android).
I am facing an Issue that i am using default text size for the TextInput, TextArea and label but text size look so small for some devices, i discuss this with some(unkown) person(he is an IPhone developer).
He told me that in Iphone development for different devices they use different text size.
So how would I do the same at our Flex Mobile application ?
Please provide me help regarding this
There is one more problem in the application. I have tabbed view application, and i assign the firstview of the tab after 10 or more seconds of interval so that data will load in the application properly.
But issue is that my first tab is not show anything at first go. When we switch the tab then it loads the screen and application work fine.
Please provide me any help so that i can see the first Tab Screen.
Thanks

Hi there. For your font issue you need to set up a variable call it var fontSize or something. Then have an if statement that reads something like if (stage.stageWidth <= 320) fontSize=8 else if (stage.stageWidth > 320 || stage.stageWidth <= 640) fontSize = 12.
Then instead of giving your font a size give it the size of fontSize variable and it will check for stage width or whatever you base it on and apply that size to your text field.
I had done this for an app I did for Kellogg Garden Products but if you notice when you go from portrait to landscape mode the font size increases using this technique.
http://itunes.apple.com/us/app/kellogg-garden-products-soil/id440522636?mt=8

Problem with font size, not showing up as expected.

I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
http://www.kgngroup.net/logos_and_packaging.html
I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
Not sure where to go from here. I just want to get the body font down to 10 pixels.
TIA,
Ken

John Waller wrote:
I guess this a follow up to your earlier thread
http://forums.adobe.com/message/3627681
What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
e.g.
The tiny font in the RHS column is affected first by
.style8 {
font-size: 0.5em;
affecting the <td> then by
.style11 {font-size: 75%}
affecting the <p> tag.
End result = tiny text (approx 2px).
In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically starting from the <body> tag downwards.
That'll give you a solid baseline without weird effects.
Ah, I find your answer worth repeating.
Very cool that you have diagnosed so well and spelled it out here.
I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
Thank You,
Ken

Problem using relative sizes on a HTMLtext

Hi
I have a problem using relative sizes on a HTMLtext on Flash
ActionsScript
2.0
Something like:
htmltext= '<font size="+5">TITLE</font>Text
Praragraph...'
(+5 in normal HTML means is 5 points bigger than the standard
text.)
I create the the textArea i set the size and everything if I
do it by
actionscript everything works fine except when i setup the
htmltext, the
text disspears so I need to re-set the embeded font with:
myTextFormat.font = Varfont;
textBox.embedFonts = true;
textBox.setTextFormat(myTextFormat);
But using this lines I lose the previous size. that i
assigned before when i
created the textarea. And goes to a standard size... dont
know why, i am
using a different TextFormat.....
And If i want to use the size i was using , all the text
becomes the same
size (but is the size that I want)...
If I create the text area manually using the gui, it works
well.
¬_¬
>-------------------------------------------------------------------------------------<
The main problem is... why the the text dissapears when i set
a new html
text???
>-------------------------------------------------------------------------------------<
Thanks.

1. Really there are a few functions that i skiped yesterday:
3. The font is linked and embeded in library.
public function setHTMLText(texto:String):Void {
textBox.html = true;
textBox.htmlText = texto;
public function setEmbedFont(__font) {
_font = __font;
_embed = true;
setTextStyle(__font);
public function setTextStyle(__font:String, __bold:Boolean,
__underline:Boolean, __italic:Boolean) {
var myTextFormat:TextFormat = new TextFormat();
myTextFormat.font = _font;
textBox.setTextFormat(myTextFormat);
public function setTextSize(__size:Number) {
var myTextSize:TextFormat = new TextFormat();
myTextSize.size = _size;
textBox.setTextFormat(myTextSize);
Kind of constructor:
autotext_txt.setTextSize(20);
//1 if I activate this one the text will dissapear after
asigning a new
text. And I will need to apply the embed font again.
autotext_txt.setEmbedFont("Arial2");
autotext_txt.setHTMLText(This is a text (big text) | <font
size="-5"
color="#dddddd"> Small Text</font>');
autotext_txt.setEmbedFont("Arial2");
Why dont u have a try?
Thanks,
J
"kglad" <[email protected]> escribió en
el mensaje
news:elo6bk$pu3$[email protected]..
> 1. where's Varfont defined?
> 2. htmtext should be htmlText.
> 3. have you defined a linkage id for a library font?

Weird problems with 2007 15" MBP after installing new HD, any solution?

Folks-
For a couple of months my machine has been really weird.
(1) Safari will not work. Firefox does, other internet apps do, but no Safari.
(2) everything is ever slower. Spinning beachballs constantly.
(3) won't remember home wifi network. It remembers the pw, but must select the network
(4) won't sleep when scheduled, only when closed or immediately commanded to sleep.
I would say that these weird problems surfaced after I installed a new optical drive, after I upgraded to 10.7, etc, except that the main problems are absent when I start up from the old HD externally mounted (the refusal to sleep when scheduled is also present statring from the old HD).
This could indicate some wierd driver thing with the new drive, or a system software event I didn't notice or one of these "malware" things, right? Maybe?
Any ideas for how to troubleshoot this would just rock.
Thanks!

Since you have your old hard drive here's a suggestion:
Step One: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Two: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new internal hard drive (entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Three: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Four: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Different font sizes in Explorer and Safari

Hi there, before I go completely nuts can someone give me a
hand with figuring out how I can get my plain old body text to
display at the same size in both Explorer and Safari.
I am using a Mac myself, but when entering text at size 1, it
is displaying larger in Explorer (at about the size I want) and
very small in Safari (too small to be easily readable). I have done
some research and thought cascading style sheets might be the way
to go but I have also read that the some text problems occur when
using cascading style sheets.
I haven't bothered with them previously as there hasn't been
that much text to bother with them.
Has anyone got any tips, or has used CSS to fix this problem?
Regards,
Elle V
p.s. if you are using a mac, you can check out what I mean by
viewing www.homestylefinance.com.au/company.html in both browsers.
I would be interested in hearing from a PC user to see if they are
seeing the same thing.

You can define your text sizes in many different ways:
points, pixels, em,
percentages, etc.
I personally use a percentage to define my base font-size in
my style sheet,
and then declare different text sizes in em's for different
selectors. I'd
stay away from points (which it sounds like you're using them
- due to the
fact that cross-browser display varies). I'd also stay away
from pixels,
because IE users can not resize their browser text size.
My personal suggestion would be to use em's to declare your
font sizes. Here
is an example of something you could put in your CSS document
(which you'll
want to start using):
body { font-size: 100%; }
.text1 { font-size: .75em }
HTH, take care.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Elle V" <[email protected]> wrote in
message
news:e89ngu$ga6$[email protected]..
> Hi there, before I go completely nuts can someone give
me a hand with
> figuring
> out how I can get my plain old body text to display at
the same size in
> both
> Explorer and Safari.
>
> I am using a Mac myself, but when entering text at size
1, it is
> displaying
> larger in Explorer (at about the size I want) and very
small in Safari
> (too
> small to be easily readable). I have done some research
and thought
> cascasing
> style sheets might be the way to go but I have also read
that the some
> text
> problems occur when using cascading style sheets.
>
> I haven't bothered with them previously as there hasn't
been that much
> text to
> bother with them.
>
> Has anyone got any tips, or has used CSS to fix this
problem?
>
> Regards,
>
> Elle V
>
>

Really weird problem with Usage Tracking!

Hi guys
We are running OBIEE 11.1.1.6.5 on Exalytics and allmost all is fine and dandy. We have though one weird problem. When we first enabled usage tracking, we sudddenly got some errors on some of our dashboards, saying that we didn't have the privilegies to create temporary tables. Allright we got our user (which is a shared user) the privilegies to create temporary tables, and the reports with the problems started working again! Awesome! But low and behold - then Usage Tracking stopped working, not a single mentioning in the logfiles about it. Maybe an error or, the acknowledgement that Usage Tracking has started, which is the normal.
So basically we are running without Usage Tracking because the reports that gives us the problems are deemed more important... which they might be, but thats different story...
Any ideas to what is going on here? We have collected Usage Tracking data, while the reports were broke, so im quite confident that the setup is correct. But why would it stop, when giving "create table" privilege to our shared user?
Best regards, Jacob

What is the setting for UsageTrackingDirectInsert?
Have you tried chaging the output to file instead of database?
Please see:
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/usage_track.htm#i1017237
Section 9.3, "Setting Up a Log File to Collect Information for Usage Tracking"
Michael
PS:
Hi Christian! :)

QuickTimePro - Export vs Save - Different File sizes

Hi,
with the trim to selection command I selected a bigger part of an AVI-video (Video track format: MPEG-4 DivX v.5 + Audio: Mpeg-1 layer 3 (mp3)).
Although I did not change the video or audio settings I got different file sizes:
The exported video has double the size than the saved file.
Therfore my questions:
What is the reason?
What should I prefer - export or save - trying to get smaller files with the same quality?
Thanks for a tip.Greetings from the heart of Germany
Herbert

HI mrfibuli
I think you are seeing a general housecleaning of things that
were formerly in your library. For example, lets say you took a
fairly large project. Perhaps 80 slides. Then you delete 60 slides.
This would leave many items in the library. They would be there,
but be unused. So you save as, and after a couple of times of doing
this, the unused objects are purged from the file. This is why you
are seeing a difference in size.
Sincerely... Rick

Weird problem: different layer sizes

Similar Messages

Maybe you are looking for