Weird Problem (Please See thread reference)
Here is the thread started for iWorks. What I need to know is what the gentlemen asked in the a thread on the 3rd page and also how I can create a new login account with as minimal problems as possible. I.e. what does it do? Does it reset my passwords? Do I have to reinstall certain software? etc.
Here is the link: https://discussions.apple.com/message/15360327#15360327
Thanks,
Jed
Well...the good news is, I pulled the Preferences folder to the desktop and Pages worked normally after that. The bad news is, when I tried to pull my Preferences folder back in from a backup, nothing works right anymore...my dock, my mail boxes, everything, all gone. Not sure what is going on here because the folder says the preferences are there. It did tell me when I tried to copy and paste the directory that I couldn't do that because it was a system directory but it didn't argue when I tried pulling it in from my backup drive. I guess I should have left well enough alone because for now, my business is at a standstill. Any opinions or options I have for getting back to where I was would be greatly appreciated. The sooner the better.
Thanks,
Jed
Similar Messages
-
How to make my code more modular? Please see thread.
Question
How do I go about doing something like the example below? Please see example.
Example of current form
My current method of painting to a component is as follows:
public class Pane extends JPanel{
public void paint(Graphics g){
... (all painting is done in here) ...
}What I want to do is break the painting method into multiple methods and or classes, so my program is less cluttered and more modular. For instance,
Method 1
public class Pane extends JPanel{
public void paintCustomButtons(Graphics g){
// (all painting of my custom buttons are done in here) ...
public void paintOtherComponents(2Graphics g){
// (all other painting is done in here) ...
}Or should I break it up into classes, the headers of those classes are:
Method 2
public class ButtonComponents extends JComponent
public class OtherComponents extends JComponent
//and then have a panel that contains all those components like so
public class Pane extends JPanel{
Pane(){
add(ButtonComponents);
Final Questions
How can I break my painting code up? Is it possible to do method 1 or 2? If so, which would you suggest? Or would you suggest another way of organizing blocks of code?
-Thanks for any suggestions as they are much appreciated
Edited by: watwatacrazy on Feb 6, 2010 10:17 AMTo break the paint method up you can always do the following:
@Override
public void paintComponent(Graphics g) {
g2d = (Graphics2D) g;
g2d.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
paintAxis(g2d);
paintCrossHair(g2d);
public void paintCrossHair(Graphics2D g2d) {
public void paintAxis(Graphics2D g2d) {{
}Edited by: calypso on Feb 6, 2010 1:39 PM -
I have problems with seeing thread posts...
I got problems with this Forum itself: I can't see the posts of the threads. Just a few times I did see the content of one page but if I will go to the next page, the posts are be hidden again =/
I was having the same problem. Emptying the Safari caches and restarting has fixed it - at least for now.
-
Touch pad has a weird problem, please help!!!
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!Sounds like you need to restart the TouchPad. You can do this by holding the power button + the center button together for 20 seconds (yes, it takes a LONG time). This is a hardware initiated reset and won't require any screen taps.
-
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points -
How can I use a USB camera with cRIO 9022. Please see my strange problem.
Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
NI Vision Acquisition Express Error for NI cRIO 9022.JPG 39 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG 82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG 48 KBOnly GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
Machine Vision on NI CompactRIO and Single-Board RIO
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
Weird problem involving my external hard drive - help please!
I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
Can anyone help with this weird problem?
ThanksThought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Good Luck!
Cheers!
DALE -
How can I use USB camera with NI cRIO 9022, please see my strange problem.
Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
Host Computer Image or Vision Acquisition Software Installed.JPG 91 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG 82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG 48 KBWhen you select My Computer, you are running the program on the PC. In this case, the camera works because it is connected to the PC. The scan engine doesn't work because it needs to run on the cRIO, not the PC.
When you create the program on the cRIO, you can use the scan engine because the program is on the cRIO. You can't use the camera because it is back on the PC, and can't be found on the cRIO.
The project is a wonderful tool, but it may be making the programming seem too simple. It may not be clear to you that by moving a program to a different location (PC or cRIO), it is running in an entirely different environment on a totally different machine, even though it is just a little further down in the project. You can't easily access the hardware on one machine while running the program on the other.
So the summary is: The camera is attached to the PC. The scan engine runs on the cRIO. Never the twain shall meet.
Bruce
Bruce Ammons
Ammons Engineering -
Hi , I brought an I pad air 3 months ago. But recently I can't install any application and can't update any application. Even I can't install any free application. I can see one dialogue box about in red colors " there is a previous purchase problem please type your bank information correctly" . So I don't know what to do please help me. Thanks
The message implies that a previous purchase may not have been paid-for due to problems collecting the money from your account. Have you tried logging into your account and updating/changing your payment details (tap on your in Settings > iTunes & App Store on your iPad and tap 'view Apple id' on the popup and sign into it) ? Until there is an accepted payment method on your account (credit card, redeemed iTunes gift cards) and what you owe has been paid then you won't be able to download anything (including app updates).
-
estou com problemas para baixar o photoshop erro:<PRE>Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546 ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Silviap\AppData\Local\Temp\{E86F7F7E-85C2-4AC8-8B1A-255B142161A5}\Photoshop_15_ LS20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com ------------------------------------------------------------------------------------- </PRE>
Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
-
I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks
Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree -
My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Weird Problem trying to sign into my App Store Account ? Please Help !!
Im having a very weird problem trying to sign into my App store account to update my apps and to purchase new Apps. Ive tried to search the net but I cant seem to solve my problem.
Here is whats happening
My Email address is correct in my iTunes Account and also my App Store account. (which is basically the same anyway)
The problem I am having Is that when I try to download an App my old email address still shows up when it requests my password.
The weird part is that my email address is correct in my itunes and also at the bottom of my app store. Yet my old email is showing up when I try to sign into the App store.
Here are the steps Ive taken already to fix this problem and have failed.
I have signed out of my itunes and app store and signed back in..FAILED.
I went into my setting -STORE and signed out and back in..FAILED.
I dont understand why my old email is still showing up when I try to sign in to update or download an App !!!!
PLEASE HELP !!!I dont understand why my old email is still showing up when I try to sign in to update or download an App !!!!
Apps are DRM protected & tied to the account that was used to originally purchase them. Were these apps purchased using your old account details? -
hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.
Just to assist those who might help you with this, please give the exact version of Photoshop CS6 you are running, for instance CS6 13.0.1.3.
I had already asked for that in my previous post, but I guess you didn't quite know what I was referencing when I typed "exact version".
Sorry, I cannot help you myself because I don't deal with that kind of 3D images, don't use Windows, and in all frankness I'm not quite following your last post.
Also please give the exact model of your graphics card, so they can check whether it is on the list of cards tested by Adobe.
Thank you. -
Weird Problem with X6, help please!
I have got this weird problem with my nokia X6, it's display shows lines and merged colors when turned on. It started happening after I got my Nokia X6 fixed for broken screen, 15 days later after getting it fixed it started showing such display. I figured out somehow to unlock my phone while in such display horror and figured that opening a heavy app like OVI store brings back mobiles display. I don't want to send same people my mobile again. Just want to know what can be done to fix this problem. PLease Help!
Yeah, it was a nokia care center. Anyway I fixed the problem luckily. It just needed some updates. I never thought not updating can cause this problem.
Maybe you are looking for
-
I just partitioned my hard drive for WIndows and have finished the setup. Now I'm back in OS X and the hard drive image for Windows is named "Untitled." I cannot figure out how to rename the hard drive partition to Windows HD. How can I do this? Than
-
Reg: Excluding one day from the daily schedule process chain
Hi All, I have a process chain scheduled daily except Sunday i.e. from Monday to Saturday. Now i want to exclude Saturday from the daily scheduling. Any idea how we can do that. Early response will be highly appreciated. Best regards
-
ORDERS05/ORDERS IDocs - E1EDPT2-TDLINE
Hi, While creating the ORDERS05/ORDERS IDocs , I have to remove the special characters from the segment field E1EDPT2-TDLINE. Can you please tell me in which user exit, i can do this? Thanks in advance, Ezhil
-
When i try installing photoshop from adobe creative cloud it says: fail on update, try again, i try again and says the same, any help?
-
What is .BAH folder and can I delete it safely?
I have several of these and they seem to have innocuous material in them. Can I delete them without a problem?