Weird Screen Bloches..only when backlight is on

i was watching a video one day then suddenly little pixels went grey and blocked out part of the screen. and they gradualy got bigger. now its about the size of a unpopped popcorn cournel. and it jumped to the right side of my screen. its weird cause its only when the back light is on that is it visible.
now the splotches are permanent and won't leave

I have the same problem. It started a month or so ago same as yours and has not gone away yet so I think its here to stay.
I noticed at first if I pushed on the screen where the line was at it would break the line up. Mine also has a line all the way across the screen about a quarter way down the screen right in a bad spot to view vidio. I was thinking of contacting that repair site that i saw someone posted, it says they repair the lcd screen for $65. thinking of calling them.
here is the address if anyone else wants to check it out.
http://nftechservices.com/iPod%20Service.html

Similar Messages

  • Burned Image on screen, but only when using Safari

    I have a burned image on my IPhone's screen, but only when I use Safari. Additionally, when I open Safari's multiple window viewer feature, the image is there as well. The home screen and every other app is unaffected. Turning off and on the phone does nothing to fix the problem.
    I know removing the casing and battery is an adventure, so I am trying to avoid it if I can.
    Can anyone think of a way to fix this problem?
    Thanks for the help.

    Troubleshoot Safari extensions ..
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • Hiss with 5G when using SoundDock or similar ONLY when Backlight OFF

    I've found this problem on two 30gig 5G iPods and I think it may be present on all.
    -If battery is full (completely)
    -If backlight is OFF
    -iPod connected to a set of speakers via dock connecter AND the speakers control the volume, not the wheel on the iPod
    Then, in quiet sections of music there is a noticable hiss from the speakers. This disappears as soon as the backlight goes on. Also not present if the iPod is charging (rather than charged already).
    It happens on my Bose SoundDock and Belkin Auto Kit.
    Also tried it on Kensington SX 2000 in an Apple Store - Same problem.
    As a consequence the Apple store replaced my iPod. Now I've worked out about the battery, I think it is prenent on all 5G iPods, as it started on the replacement iPod as soon as it was fully charged.
    Thoughts.....
    AMD-PC   Windows XP Pro  

    Hmmm, interesting thought Jon,
    In my case it would be 50Hz Hum as I'm on the other side on the Atlantic.
    Would you get such interference in a car though? I get the same problem with my Belkin Auto kit. This is basically a cig power adaptor with a small preamp in it. It connects to the dock connector and takes the line level audio, and preamps it and sends it to a 3.5mm jack that you connect your audio tape adaptor to. Same issue - hum/hiss with backlight OFF only when unit fully charged.
    I've just taken to leaving my iPod not to turn off the screen, as I most use it powered.
    Submitted the feedback as you suggested.

  • Selection-screen problem only when in SE80

    Hi Folks,
    I am getting the following information message when the the element SCREENS is double clicked in the SE80's container.
    Element %_R1_%_APP_%-TEXT touches or overlaps
    other element
    The program is running fine without any error.I want to know why such an info message is getting popped up and how to avoid that.
    Thanks,
    K.Kiran.

    Hi,
    Open the Selection scree in SE51, double click on 1000 screen in SE80 and then click on the layout button to open the screen.
    Then there check out the screen element for which you are getting the error.
    Then adjust its size and check if this error is still coming.
    According to me this Screen element corresponds to SELECTION-SCREEN COMMENT statement in the program, you might have given the length of this text there try and reduce the length there and see if this error still remains.
    Generally we should not modify the Selection-Screen's in SE51 as they will always get regenerated when ever you activate the program and your changes will be over written.
    So try to play around with SELECTION-SCREEN statements only in the program, what you can get from SE51 is what this SCREEN ELEMENT corresponds to in the program.
    Regards,
    Sesh

  • White spot on screen, appears only when background is bright - Lenovo G50-70

    I've got this very annoying white spot which occurs only when the backgound is white =, I bought my laptop recently last week and this is what I am getting!
    Please tell how to get rid of this or any solution!

    Well lenovo support isn't available in my country I guess! Can't find it, secondly I have the seller's warranty don't know it they'll fix it or not

  • MouseEnter/mouseExit event is triggering a screen jump ONLY when zoomed in?

    Hi all:
    First and foremost, to all the people who repeatedly post answers: you are truly rock stars in my book.  Learned so much from you all; deepest, deepest thanks.
    I can't find anything online re: this issue, and BELIEVE me I've looked, so I'm going to do a detailed post with a detailed example.   If I do a good enough post, maybe that helps someone else out down the line.
    Using LiveCycle Desiger to create a dynamic PDF.
    Conditions
         When:
         1) A field has focus; (and)
         2) The end-user ZOOMS IN on the form;(and)
         3) The end-user decides to scroll away from the field with focus (so the field with focus is no longer visible on the screen but still technically has the focus)
    The Issue:
         If the cursor happens to go over an object with mouseEnter or mouseExit code, Acrobat will jump the view back to the field with focus.
    Practical example:
         1) End user opens a PDF and zooms in a little for easier reading.
         2) End user sets focus to a field at the top of the page to answer that question.
         3) End user decides to scroll down and see what other types of questions they have to answer, leaving the focus still in the top field;
         4) If the screen scrolling passes the cursor over an object with javascript in the mouseEnter or mouseExit event, Acrobat resets the view back up to the top of the page so
              the field with focus is visible again.
              Note: Even If the screen scrolling doesn't pass the cursor over an object with script in the mouseEnter or mouseExit event, if the end-user then moves the cursor over an
                        object with code in the mouseEnter or mouseExit event, Acrobat resets the view so the field with focus is visible again.
    Additional Comments
         1) Object type doesn't seem to matter.  I tested it on additional field types in the attached and the jump seems to be triggered when code exists in the mouseEnter or mouseExit
              event and the field with focus is NOT visible on the screen.
         2) It doesn't appear to be a "top" or "bottom" of page issue.  Page 2 of the attached reverses the layout from "top-to-bottom" to "bottom-to-top" and the jump still occurs.
         3) It appears to be a Dynamic Form issue as I did a save as a Static PDF and the jump does NOT occur.
         4) Happens on both PC and Mac.
    The attached is heavily noted and contains multiple buttons demonstrating the various conditions and what does or does not trigger the jump.
    Thoughts?  I'm totally stumped.  A form level property that is trying to help???
    Thanks in advance,
    BR
    (Couldn't attach PDFs for some reason.  Here's a dropbox link.  Dropbox - Public

    I don't think there's going to be a perfect solution to this problem, other than an official Adobe fix. (That's a big hint there, Adobe.)  BUT...
    ... that being said, I think Radzmar's work-around is the best answer out there. Big thanks, R.
    IMPORTANT DESIGN CONSIDERATION FOR ANYONE USING THIS SOLUTION
    Please keep the following in mind when designing your forms:
    1) Message Box location
    CONDITIONS:
                   1) It's possible you are going to validate a field on exit;
                   2) It's possible you're going to inform the end-user of failed validation with a messageBox;
                   3) It's possible you're going to reset the focus back to the field that failed validation so the end-user is forced to correct it.
                   4) It's possible you want to keep the inputted data that failed validation so the end-user can see the entry that failed and edit it,
                        rather than retyping the whole thing.
    BE AWARE OF:
                   1) When the message box appears, the end-user will have to either hit return (to acknowledge the messageBox) or click "OK" to do the same;
                   2) If the end-user uses the mouse to click "OK", that starts the mouse moving around the page again;
                   3) End-user may attempt to place the cursor in the appropriate location within the field that failed validation to correct the error;
                   4) BUT if the cursor passes over any objects with script in the mouseEnter or mouseExit event ON THE WAY BACK TO THE FIELD WITH FOCUS it will:
                        a.) trigger the clear focus script;
                        a.) which will trigger the validation script in the exit event of the field with focus again (WHICH STILL HAS BAD DATA IN IT);
                        b.) which will trigger the messageBox re: failed validation;
                        c.) which trigger's potential mouse movement to again click  "ok"
                        d.) and you see the loop they'll end up in.  They'll have to move the mouse AROUND buttons/objects with mouseEnter or Exit code to get
                             back to the field which needs to be corrected.
    So it's the combination of:
         1) Where objects with mouseEnter and mouseExit code are placed on the page; and
         2) Automatically resetting the focus BACK to the field that failed validation; and
         3) Keeping the failed data in that field.
    Unless anyone see's a work-around, I think the only thing to do is clear that failed data out of the field.  Not optimum, as the end-user won't be able to see their failed answer
    but I'm not seeing another option???
    BR

  • Tablet screen works only when using power lead

    Hi my screen on my tablet only works when its connected to the mains power

    What tablet do you have exactly?
    Regarding the screen issue:
    Do you have an problem only with the screen or there is an general table problem using the battery?

  • Weird Screen Re-Draw When Dragging on Timeline

    Just downloaded the trail of Premiere Elements 10. My first experience with it was dragging media from my project into the timeline and the screen re-draws in this amazingly buggy way. I see the same behavior any time I try to drag any item on the timeline. I took a few screen shots to demonstrate what I mean. The timeline becomes completely unusable and obscured while the program re-draws the top of the interface over it. System is a MacBook Air Core i5 running OSX 10.7.3 with an external monitor. I've tried re-starting the app with no change. With behavior like this, it's pretty much unusable.

    The red lines above the clips on your timeline is an indication of a mismatch between your video source and the project settings -- which likely also accounts for the buggy re-rendering issue you're having.
    What model of camcorder did this video come from and what resolution and format is it?
    When you started your Premiere Elements project, which project settings did you select?
    Parts 1 and 2 of my free 8 part Basic Training tutorial series shows you how to set up a project and properly get media into it.
    http://forums.adobe.com/thread/537685?tstart=0

  • Why does my iMac screen flicker only when using Safari? It doesn't happen with Firefox.

    Yesterday, I had an issue with OS X, causing my screen to go black upon waking up my pc. Come to find out through the Apple Forum, that when the OS X was originally installed, it was not a complete install. Once I received the fix solution, completing the OS X install, (10.9.3) everything was back to normal, so it seemed.
    Now, when using Safari, the whole page flickers and so forth, including the address bar. I never had problems with the screen prior to this. Also, it doe not occur when using Firefox.
    Is there a fix for this? or an adjustment that can be made. This never happened prior to the OS X install, which was about 2 months ago.

    Troubleshoot Safari extensions ..
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • White screen 3GS only when phone locks but I am volunteering in Africa so need help

    Hi everyone.
    This is my first post on communties. I have a white screen on my 3GS. It can be rectified by resetting the home but as soon as the phone is locked it goes back to white but I can take a photo of the homescreen (can tell by sound), phone will ring etc.
    After reset the phone functions completely normally until locked. This all started after IOS 5 upgrade, briefly became normal for a few days after IOS5.1 but now back to white screen probelms. I have restored to no avail.
    I have read Brad's suggestion it may be an LCD problem but seems stranges as you can reset the phone and the LCD is fine until it locks.
    Any ideas and or fixes, please bear in mind I am in Africa for a year so no Apple stores around.
    Thanks in advance, as the phone is 2 years old I am willing to open it up if required but would need advise on how/what tools required.

    Basics from the manual are restart, reset, restore.
    Try all of these.
    If these fail, then:
    iOS: Unable to update or restore

  • Dead spots on touch screen, but only when using text or safari

    For some reason my phone has dead spots, which CHANGE although one thing is consistent. I cannot press "send" on a message unless I am replying to a text straight away. I cannot initiate and then send.
    What is stranger, is that if i pull up the SAME keyboard on the facebook app, it works perfectly.
    So far i have tried recalibrating, resetting and restoring the phone to no effect. If has not been in water (unless splashed unbeknowns to me)
    Has anyone had a similar issue and how did they fix it? My iphone is 3rd gen so no warranty but was in perfect working order until yesterday.

    I can certainly understand your frustration. I have not heard of any other cellphone or PDA manufacturer that gives out free loaners while their equipment is being replaced. Although I have certainly heard about this practice in BMW and Mercedes dealerships, the cellphone/PDA industry is a little different.
    I am surprised they had never heard of the problem, which probably means they have never visited this forum. I have read many posts regarding this problem, and if a reset/restore doesnt do the trick, it has always required repair or replacement.
    Its the same with a Treo or a Motorola Q or a Blackberry. It is not reasonable to expect the manufacturer (Palm, Motorola, etc) to provide free loaners. The cost for this "free" service would inevitably have to be passed on to all buyers. I have a cheapy GSM phone in a drawer I use to stick my SIM card in when I don't want to use my iPhone, or in the event I have to send it in for repair. Having that alternative is my responsibility, not Apple's.
    Now that I think of it, Palm doesnt even rent loaners. I would have been stuck with NOTHING had my Treo required service. At least Apple gives me a better choice.
    That's another spin on it.

  • I have an iPhone 5 right now.. But the wifi does't say active all the time. It would be on for a while, then disconnect. My power button also doesn't work at times.Sometimes it wakes up the screen, but only when I press it on one side.

    I was also wondering if I could take this to the apple store to get it fixed. If not get it replaced?

    If you arrive without an appointment and all appointments that were available at that time and following that time are booked and there are no no-shows with any of the apointments, you will be out of luck. You might get lucky with no appointment scheduled at that time you arrive and there are no other walk-ins without an appointment in front of you, but best to schedule an appointment.

  • Pc repair pc keeper and media player 12.2 are blanketing my screen and only when using firefox

    what the hell has happened to the formerly secure firefox? I cant even use it without all the above mentioned crap overwellming my computer

    Please continue this at your original question. Thank you
    https://support.mozilla.org/en-US/questions/1055713

  • Why does my computer crash to blue screen with message when Photoshop is open?

    This happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
    I contacted support and chose to have someone call me back due to the wait. 15 minutes later, I got a call back from India and exlplained this. He got my phone number and asked me to hold while he got someone to help me. ONE HOUR AND 20 MINUTES later someone from India came on and I explained it all over again. He said he was going to check into it and 5 minutes later I was DISCONNECTED. No one called back and there is no option for Adobe, but to call back and start the process ALL OVER AGAIN. From what I see in these forums, it happens all the time and is serious problem with Adobe.I would never do business with a company with this type of horrible support and don't think I will continue my subscription with them. I am a graphic designer and do not have the time for computer crashes and support that does not care.

    Thanks, Bill. Your response has been the most helpful. I have not yet tried the steps in your articles, but have a little more info that may help narrow it down. However, it has not happened for a couple weeks. I run a large CAD progam that also has never caused this issue.
    The blue death screen occurs only when PS is open and when the computer goes to the screen saver. When I wake my screen this message is there:
    "A problem has been detected an windows has been shut down to prevent further damage to your computer.
    The problem seems to be caused by the following file: win32k.sys
    PAGE-FAULT-IN-NONPAGED-AREA
    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
    Check to make sure any new hardware or software is properly installed. I this is a new installation, ask you hardware of software manufacturer fo any windows updates you might need.
    If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable such components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
    Technical Information:
    *** STOP: 0x00000050 (0xE57C1304, 0x00000000, 0xBF8892C3, 0X00000001)
    ***  win32k.sys - Addre4ss BF8892C3 base at BF800000, DateStamp 4ff2f633"
    Beginning dump, blah blah blah.
    After this happenend 2-3 time after installing the PS trial, it was obvious that it was the only software change I had made. I stopped using it and went back to using my PS4 and the blue screen never happened again...until I purchase my subscription and used it again. I don't know if any of this helps narrow down what I can test, but you have given me the most knowledgeable feedback. Thanks again.

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Maybe you are looking for