Welcome to Ensemble 1.0!

Welcome to the Ensemble newsgroup. This is where we'll be discussing the upcoming 1.0 release of Ensemble. Feel free to ask technical (and other) questions, and make comments and suggestions about the product. We'd love to hear what you have to say about Ensemble, and we'll do our best to answer your questions.
Don Hayler
Ensemble - Staff Engineer

so is that like a trial download?
or does one need a full license to get it?

Similar Messages

Clicks and Pops with Apogee Ensemble/Duet since upgrade to OSX-ML

Problems with Clicks and Pops in Logic 9 (9.1.8 64 bit) since I upgraded to
Mountain-Lion (10.8.2) Does not really matter if I change the Buffer from 128
to 512! It is not very often but not acceptable. I made an additional
setup with external HD an installed SnowLeopard again. With this
OS-Version I can run without any problems with Buffer-Sices 128 or 64. Same
problem I had with my DUET as well. Would switch back to SL but some
of the programs I bought from Apple are not compatible with older OS
than Mountain-Lion. I also made a complete new ML installation from
scratch with only Logic Pro 9 and the needed USB-driver for my
Yamaha-CP1 but still the same thing. I do not see any
processor-Problems. I have an iMac (Mid 2010, 2,8Gh i5, 16 Gbyte Ram,
512 Gbyte Crucial SSD) Strange thing is that if I change the amount of threads used from
"Auto" to anything else it seems that the amount of Clicks will change for a
while. But it is not really reproducible and after a short time it reapears. Any idea what I can do to
fix this problem? Could it be that the driver is not that stable than
it was under SL?
Apogee Support told me after some correspondence more or less, that I am the only one with this issue... ?!?!?
I already changed cables, switched to USB-Keyboard instead of bluetooth, disabled WLan, installed a 2nd Harddisk and reinstalled the OSX and LOGIC a couple of times without any effect. The only way to get the Ensemble or the Duet working ist to switch back to SL which can't be the solution as it should be fully compatilbe with Mountain Lion. At least this can be read on the support pages fom Apogee!
Is there anyone with the same kind of problems?

Ok, folks...finally figured it out. Thank you so much for being willing to brainstorm with me on this. Here's the deal:
As I was searched online forums I found some discussions regarding different firewire chips they put into different models of the macbook pro's. Apparently you can have the TI (texas instruments) chip or the Lucent chip, you can discover which by holding down 'apple' and 'S' right after the welcome sound when you're booting up your MBP. As you search through the info it should say TI or Lucent by firewire.
Apparently, the Lucent chip is known for causing issues with different devices...this is the chip I have in my MBP. Someone on another forum said they bought an external firewire bus and just put it between the computer and interface and it solved the problem...so I thought 'what the heck.' I went and bought one and it worked perfect! Crazy.
So, now I need to talk to apple and i'm hoping they'll be willing to swap my chip for a TI one or at least cover the cost of the firewire bus.
Thanks again for helping me out. Hopefully this thread helps the next guy so he won't have to spend 3 months troubleshooting like I did.
God bless

Welcome to DooWapp :)

Hi guys,
Welcome to the DooWapp board on the O2 Community
This is where you can share your thoughts on DooWapp after giving it a download and play.
We really want to know how you're finding the way it functions, the way it navigates, any bugs/issues you see as well as any other useful thoughts you have. As O2 community members you have first access to this and can help us make sure this app is as fantastic as can be!
Simply start a new thread about whatever aspects you like and my team and I will get involved in the discussions. I cant wait to get stuck in and I hope you all feel the same.
Use the link below to download the app (Currently only available on Android)
www.doowapp.me/download.php
Below are some FAQs which you can also find on the DooWapp website
What is DooWapp? 
DooWapp is a free Music messaging app that lets you search and insert song lyrics into your messages.
Is DooWapp linked to my telephone number?
Yes, DooWapp works like many messaging apps and needs your phone number.
How do I find my friends on DooWapp?
It’s easy, DooWapp offers you the possibility to browse through all your phone contacts; simply navigate to the Contacts Tab (the second icon at the bottom, in the main menu).
How do I invite my friends on DooWapp?
You can invite friends either by sending them a DooWapp or by clicking the dedicate button in the Contacts screen.
Why do my friends without DooWapp come up as contacts?
DooWapp relies on Telegram open code, therefore all the contacts who are already using Telegram will display on your contacts list as if they had DooWapp installed on their phones. You can simply send them a DooWapp and they will be able to download the app and chat with you using song quotes.
Why did I receive a message from Telegram?
You received a message from Telegram because DooWapp is built on top of its open technology.
How do I send a DooWapp?
To insert a DooWapp in your message is simple; just click on the DooWapp icon on the bottom right, access the quote search tab and navigate among a huge number of quotes by typing either the name of the artist/song or the text you want to include in your message.
How can I refine my search? Is there any advanced search option?
At the moment, DooWapp Beta Version doesn’t feature an advanced search option. It will be available as part of the next public release of the app. Please subscribe to our newsletter for further announcements.
Can I send a DooWapp to people outside the app?
Yes you can, but they won’t be able to experience the message as if in DooWapp; when a person without DooWapp receives a message containing a music quote the receiver will be redirected to our website where he can decide whether to download the app or just listen to the quote.
What if I can't find my favourite artist on DooWapp?
DooWapp team is constantly at work to provide its users with the biggest number of artists’ quotes. If you can’t find what you’re looking for you can send your suggestion via email to [email protected] using the subject “Quote Creation Suggestion”; our team will then handle your request and create the relative content in the shortest time.
What if I can't think of a quote or an artist?
DooWapp offers you the ability to search among popular quotes when you don’t feel inspired; simply click on the “Popular quotes” icon. Then you can then refine your search.
DooWapp is still under heavy development, so stay tuned to discover new ways to impress people and use your imagination. Please subscribe to our newsletter for further announcements.
What are artist profiles?
You can search for artist profiles by clicking on the “Artist profiles” icon. This section includes DooWapp featured artist campaigns and bios, it also gives you the opportunity to follow specific artists.
How do I follow my favourite artists on DooWapp?
To follow your favourite artists click on “My Artists” button, at the “Artist profiles” screen, and use the search function to reach your inspirers.
What are Auto Play Message and Playback Fade In settings?
Auto Play Message: When switched on, the quote will play automatically when clicked.
Playback Fade In: Gives you the ability to change the length of the quote fade in
How do I change my profile picture?
To change your profile picture, first go to the settings tab by clicking the settings icon in the bottom main menu, then click on the user picture icon and select from what source you prefer uploading your profile picture.
Can I block someone from contacting me?
Yes, you can; simply open the profile of the contact you wish to block and select the specific option.
Who do I contact about technical issue, send feedback or suggest a new feature to the DooWapp team?
You can contact the DooWapp team by sending an email to [email protected]
How do I report a broken quote?
To report a broken quote send an email to [email protected] using the subject “Broken Quote”.
Where do I subscribe for newsletters/mailing list?
If you wish to subscribe to our newsletter go to our website www.doowapp.me and fill the form at the bottom of the page.
In what territories is DooWapp available?
DooWapp is only available in the UK territory for now but is aiming to expand globally. Please subscribe to our newsletter for further announcements.
Is DooWapp available in other languages?
Along with DooWapp’s desire to expand globally our service will be available in as many languages as the countries it is available in.
Can I use DooWapp offline?
DooWapp team is developing an offline mode that will allow users to play the quotes even when not connected to the internet. Please subscribe to our newsletter for further announcements.

Toby wrote:
Hi @jonsie, Has your other device picked it up yet? @iamthestig, I'll look for a Windows version update Unfortunately not

R3load EXPORT tips for 1,5 TB MAXDB Database are welcome!

Hello to ALL;
this post is addressed to ALL MAXDB-GURU's !!
I'v few questions to MAXDB Performance-Guy's for R3load Export on MAXDB!
(remark to my person:
I'm certified OS/DB migration consultant and have already done over 500 OS/DB migrations since 1995 successfully)
BUT now I'm face with following setup for Export:
HP- IA64 BL870c, 4 CPUu2019s Dual-Core + Hyperthreading activ (mean's 16 "CPU'S" shown via top or glance)
64 GB RAM, HPUX V11.31;
MAXDB 7.7.07
ECC 5.0; Basis/Aba 640.22
SAP-Kernel 640-Unicode Patch 381
8 sapdatas are configured on unique 200GB LUN's and VG's in HP-UX; on storage-side the 8 220GB LUN's are located on (only) 9 300GB-Disks with Raid-5 Level and within HP-UX each VG/LVOL is mirrored via LVM to a second desasterdatacenter (200m distance)
LOGFILES:
2 x 4 GB LUN Raid-1 on Storage and via LVM also mirrored to failover-center
MAXDB-Datasize: 1600 GB Overall and within this 1350 GB used, TEMPUsage about 25 GB !
MAXDB-Parameter-Settings
MAXCPUu2019s 10 (4 x IA64 QuadCore+Hyperthreading shows 16 Cores within top and galcne
Cache_SIZE= I/O Buffer Cache = 16 GB (2.000.000 Pages)
Data-Cache-HitRatio: 99.61%
Undo-Cache = 99,98%
the following sapnote for MAXDB Peformance and Migrations are well known and already processes
928037, 1077887, 1385089, 1327874, 954268, 1464560, 869267,
My major problem is the export-runtime with over 4 days on the first dry-run (6 R3load's running on Linux-APPL-Server), and 46h on second runtime, 6 R3loads running on DB-Server IA64)
the third trail-run was aborted by me after 48hours and 50% export-dump-space was written. In all 3 dry-runs, no more than approx 3.5GB DUMP-Space were written per hour!
My first question to all MAXDB-Guru'S: How can I influence/optimize the TEMP - Area in MAXDB?? I didn't find any hint's in SDN or SAPNOTES or MaxDB Wiki or google....As fare as I know, this TEMP area "resides" within MAXDB-datafiles, thus it's seperated on my 48 datafiles, spreaded over 8 LUN/VG/disks. But I see LESS throughput on disk's and MAXDB-Kernel uses only ONE of ten's cpu-cores (approx 80% - 120% of 1000%).
The throughput or cpu-usage doesn't change when I use 2 or 4 or 10 or 16 R3load' processes in parallel. The "result" is always the same: approx. 3,5 GB Export-Dump and 1 CPU MAX-DB Kernelprocess is used !
so the BIG Question for me: WHERE is the bottleneck ?? (RAID-5 Disk-LUNS mirrored with LVM ???)
on HP-UX scsi_queue_depth_length I'v increased default value from 8 to 32 to 64 to 128 --> no impact
2nd question:
I'v read OS-Note 1327874 - FAQ: SAP MaxDB Read Ahead/Prefetch, and we are running MAXDB 7.7.07.19! (MaxDB 7.8 is not suppored via PAM for IA64 640-UC-Kernel) and as far as I understood, this parameter will no HELP me on EXPORT with primary-key-sequence ! is this correct? THUS: which parameter HELPS for speeding up Export-Runtime?
MAXCPU is set to 10, but ONLY 1 of them is used??
so this post is for ALL MAXDB GURU'S!
who will be intrested to contriubte on this "high-sophisticated" migration-project with 1.5TB MAXDB-Database-size and ONLY 24h Downtime !!
all tips and hints are welcome and I will give us coninued updates to this running project until WE did a successfull migration job.
PS: Import is not yet started, but should be done within vSphere 5 and SLES 11 SP1 on MAXDB 7.8 ....and of yours in parallel to export with migration monitor, BUT again a challenge: 200km distance from source to traget system !!!
NICE PROJECT;
best regards Alfred

Hi Alfred,
nice project ... just some simple questions:
Did you open a message at SAP? Maybe you could buy some upgrade support, this could be usefull to get direct access to the SAP support...
Which byte order do you use? I know Itanium could use both. But it should be different, otherwise you would use a backup for the migration.
And the worst question, I do not even want to ask: What about your MAXCPUS parameter? Is it set to more than 1? This could be the problem why only one CPU is used.
Best regards
Christian

Header and Welcome disappearing in PDF Portfolio

Good day,
The Header and Welcome pages disappear in my PDF Portfolio after saving and closing. It appears to be related to the most recent update, as I don't remember having this issue before. If I create the document from scratch and save, it appears on the first open; however, if I edit that document the problem repeats itself. These Portfolios will need to be updated on a fairly regular basis, and I would prefer not to have to constantly re-create them if possible.
I tried the trial of X (had heard bad things), but it doesn't have the same choices for layout styles and the file size has increased dramatically from 9 to X, likely related to upgraded look and feel (which feels cartoonish to me).
Any suggestions on how to fix this issue?
Version 9.4.3 or X, if you can provide a source for layouts that allows a file preview.
Thanks,
Chelsea

Hi Chelsea,
This may be a known bug. See thread http://forums.adobe.com/message/3491158#3491158 , specifically the scenario/workaround Josh_Corey posted on March 7th at 6pm.
Does that resolve the issue?
Laura

Photoshop/Premiere Elements 10 installed but won't run past Welcome screen

I bought and downloaded Photoshop Elements 10 and Premiere Elements 10 for Windows 7 - 64 bit on Dec.31/11. There were no error messages in the download, although the Akamai downloader screen didn't seem to show 100% before proceeding to the next step. Everything appeared to install correctly (it's a long process!).
At first, clicking on the desktop icons or the Start Menu list would bring up the Welcome splash screen, where the broad options (Organize, Edit, New Project) were shown. However, clicking on these options had no effect at all. Eventually even the Welcome screen wouldn't appear. I checked the Windows task manager and no applications were running.
I checked the shortcut properties and noticed that there was a separate executable in the target directory (eg. existing link was to "Adobe Premiere Elements 10.exe", but there was also a file called "Adobe Premiere Elements.exe"), which did run...however, I couldn't launch the Organizer from that program, and the "Home" link to the Welcome screen didn't function either.
With thousands of these programs being downloaded, I'm surprised that this serious glitch hasn't surfaced before. Any ideas?
Thanks!

There are three different programs -- Photoshop Elements (PSE) which is for editing bitmaps, Premiere Elements which is for video editing, and the PSE Organizer which is for cataloging your media.
I don't like the sound of that Akamai downloader not registering 100%.
Uninstall all the Adobe products, reboot, and download the installation package again. Check the Properties on that downloaded file and "Unblock" it if Windows has flagged it as "possibley harmful and coming from another computer" before starting the installation.
Ken

How do I get rid of the /welcome subdomain address from my website address?

My website cobbity.com redirects to cobbity.com/welcome when opened on home page, how can I get rid of this problem?
thanks in advance

Why is this a problem? It is perfectly normal - Welcome is the very first page of your website, so when someone enters your url, it will go to the first page of your site which happens to be http://www.cobbity.com/Welcome.html.
My own site is the same - my first page is welcome and when someone types in my url it goes to http://www.domain.com/Welcome.html. Normal.
Where are you publishing to? MobileMe or an external server such as GoDaddy? If MMe, then you can change the way in which you link your domain name to your site - rather than using CNAME forwarding, change it to masked web forwarding. If you use this, then you forward your domain name to web.me.com/username/sitename and all that you will then see is http://www.domain.com for every single page if this is what you want?
Only problem with this is that people cannot bookmark individual pages of your site, just the whole site.

I rented and downloaded two movies from iTunes via my iPad. They show up as purchased in items but won't play. They do not show up in iPad visor app at all. Any ideas on what happened and how to fix are welcome. Thanks

I rented two movies from iTunes using my iPad. They show us as purchased but will not run from there. I get a message saying I have 24hours to watch then it just goes back to iTunes. I looked in video app where they usually go and nothing is there. Any ideas for a fix are welcome?
Thanks

You did try tapping on one of them in that list in the iPod app! This has happened to me and I was able to start the movie from there. You could try restarting the iPad, go into the iPod app and try again.
Now I'm stumped unless it is a corrupt download. You did download right onto the iPad - correct? If you downloaded in iTunes, there is a Move tab or function that you have to select to transfer the movies to the iPad when you sync. They just don't sync over without selecting move.

Voicemail access request my ID, and i returns Welcome message

Hello when accessing the Voicemail extension of my own I am requested to enter my PIN and my ID,
I am performing the access to Unity through my own DN, found very strange Unity ask for my ID because it is should request this
only when I make my access to another phone.
After entering the PIN and ID, the system returns me the welcome message of unity, and I can not access my voicemail.
ome message of unity, and I can not access my voicemail.

Thanks George, after i restart my cluster CUCM, the Voicemail returnet to work.
This all right now

Itunes 11 welcome screen every time I open the program.

Yeah,
itunes 11 opens to welcome screen every time I open the programme.
OS Win8
very annoying
help?

This is what worked for me!!!!!
Close iTunes.
With Windows Explorer go to View in the top menu and allow Hidden Files.
Navigate to:
C:\Users\[which ever user is you]\Appdata\Local\Apple Computer\iTunes
Delete all files in this directory.
Start iTunes and see the Welcome Screen for hopefully the last time!
I am not an expert. This was a stab in the dark based on the Mac ByHosts solution and it just happened to work for me. Give it a try and let me know if it works.
Good Luck!

On an iphone 4s, when I tap the phone number in my contacts list instead of calling the number it goes to a "Welcome to mail screen" how do I make it call the number instead?

On an iphone 4s, when I tap the phone number in my contacts list instead of calling the number it goes to a "Welcome to mail" screen with icloud, Microsoft exchange, Gmail, Yahoo, Aol & Windows Live Hotmail listed beneath. How do I make it call the number instead?

Never heard of that. I suspect it thinks that's an email address and you're seeing that screen b/c you don't have an email account setup on your iPhone.
Assuming the number is valid, try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

I just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
But hey thanks for your help,

Why does the Welcome to firefox tab open with my google tab every time I open the browser? And why can't the browser hold any add-ons I downloaded? I loose then when I close the browser, even tool bars have to be reinstalled every time I open the browser

Every time I open the browser the Welcome to Firefox tab is the first tab, then a second tab opens and thats my google, then a 3rd tab opens for me to reinstall my toolbar. This has been happening for a good year. Updates have not fixed it. Others have this problem. I did a search for an answer, the question is out there but no answer. Now if I go into add ons and add a background Theme or an extension it all is gone when I exit the browser. When I open the browser again I get all 3 tabs and have to install my toolbar again. I DO NOT want to reinstall as I will loose all my saved data, passwords, bookmarks, everything! I have had this computer for a year, Windows Vista x64 bit. Its not the computer, it's the browser. If you have specific questions e-mail me and I will be more then happy to help

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

How to delete file from DW welcome screen

Don't know much about CS3, but learning. Erased some files,
started over again, but noticed the name of the file/site is still
showing on the "welcome" screen when I open CS3. Can't find a way
to delete it. Any suggestions?
Thanks

i think you might just have to wait until you've
opened/created enough
files to move the old ones down and off the list.
or you could just click the "don't show again" box on the
Welcome
screen. it's not really necessary, because you can find all
of those
options in the menu at the top as well. that welcome screen
may seem
handy now, but you'll probably get sick of it eventually. i
know i did!
MrStuart01 wrote:
> Don't know much about CS3, but learning. Erased some
files, started over again,
> but noticed the name of the file/site is still showing
on the "welcome" screen
> when I open CS3. Can't find a way to delete it. Any
suggestions?
> Thanks
>
>

Welcome to Ensemble 1.0!

Similar Messages

Maybe you are looking for