What are all scenarios we will open the database in open resetlog mode
what are all scenarios we will open the database in open resetlog mode..please advise
Another situation I could think of is that when the active/current online redo logs are lost.
Regards,
Jaffar
Similar Messages
-
Cannot open the database, stuck in mount mode
Someone please shed some lights on this problem.
I ran into some media failure, and ended up restoring the database from the offline whole backup.
The database is in the nonarchivelog mode (I know, it is not good), so there is no archive log files and
restore database is the only solution.
. startup mount
. restore database <== ran ok
. ALTER DATABASE CLEAR LOGFILE GROUP 1 <== ran ok
. ALTER DATABASE CLEAR LOGFILE GROUP 2 <== alter failed
ORA-01624: log 2 needed for crash recovery of instance orcl (thread 1)
Alter failed with group 2 and 3 because one was CURRENT,
and one was ACTIVE.
SQL> select group#, sequence#, members, status from v$log;
GROUP# SEQUENCE# MEMBERS STATUS
1 0 2 UNUSED
3 189 2 CURRENT
2 188 2 ACTIVE
I also tried 'alter database open resetlogs', and got:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
I don't think I can recover the datafile since there is no archive log file here.
Besides, if the restore database ran fine, why did I get SYSTEM01.DBF datafile needs media recovery message?
Right now, the database is in mount mode, and I cannot open it. How do I solve the problem with
ALTER DATABASE CLEAR LOGFILE GROUP for group 2 and 3?
Any suggestion? Thank you for the input.
The database is 11G running on Window.I would think the cold backup ran successfully. Here is the backup record:
RMAN> run {
2> shutdown immediate;
3> startup mount;
4> allocate channel c1 type disk;
5> backup as backupset database;
6> alter database open;
7> }
8>
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 535662592 bytes
Fixed Size 1348508 bytes
Variable Size 331353188 bytes
Database Buffers 197132288 bytes
Redo Buffers 5828608 bytes
allocated channel: c1
channel c1: SID=156 device type=DISK
Starting backup at 29-NOV-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00002 name=C:\APP\DAVECW\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00001 name=C:\APP\DAVECW\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00003 name=C:\APP\DAVECW\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00005 name=C:\APP\DAVECW\ORADATA\ORCL\EXAMPLE01.DBF
input datafile file number=00006 name=C:\APP\DAVECW\ORADATA\ORCL\INVENTORY01.DBF
input datafile file number=00004 name=C:\APP\DAVECW\ORADATA\ORCL\USERS01.DBF
channel c1: starting piece 1 at 29-NOV-09
channel c1: finished piece 1 at 29-NOV-09
piece handle=C:\APP\DAVECW\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_11_29\O1_MF_NNNDF_TAG20091129T230
632_5K6VQY0W_.BKP tag=TAG20091129T230632 comment=NONE
channel c1: backup set complete, elapsed time: 00:01:55
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel c1: starting piece 1 at 29-NOV-09
channel c1: finished piece 1 at 29-NOV-09
piece handle=C:\APP\DAVECW\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_11_29\O1_MF_NCSNF_TAG20091129T230
632_5K6VVNJR_.BKP tag=TAG20091129T230632 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:03
Finished backup at 29-NOV-09
database opened
released channel: c1
Recovery Manager complete. -
What are all of these tables in my database using 10gEx?
Hi I just installed sql developer and managed to connect to my 10gEx
i see tens of tables and views in my databse , can i delete them and start to build my own tables ?
why they have such un_well_structured_names like : AQ$_INTERNET_AGENT_PRIVS ?
can i build Schema in my database and use that Schema for my data ?
why those are not categorized in Schema , or maybe it is Sql developer fault that shows them like this ?
ThanksShort answer:
a) these are Oracle supplied tables. Don't mess with them.
b) by all means. it is best practice to create a separate schema and keep your objects (tables, indexes, etc.) in that schema. in fact, build lots of schemas - one per application.
Long answer:
Oracle has a bunch of support schemas that are delivered in typical installations.
You also want to look at the schema owner of these tables and views to get some idea of what they are and why they are used. For example:
a) Userids:
CTXSYS: Oracle Text feature and capabilities
DBSNMP: Oracle system management
FLOWS_020100: Application Express
FLOWS_FILES: Application Express
HR: Database and Application Express 'main & demo' user
MDSYS: Oracle Locator feature and capabilities (subset of Spatial option)
OUTLN:
PUBLIC: general public userid
SPATIAL: Oracle Locator feature and capabilities (subset of Spatial option)
SYS: the database owner
SYSTEM: the database administrator
TSMSYS:
XDB: XML and HTTP features and capabilitiesStuff owned by SYS is sacrosanct never, ever, change it directly. Especially anything that includes a '$' or a '#' in the name.
Some specific table prefixes and functionality
AQ advanced queueing
AUDIT - system auditing
CDC - change data capture
DBMS - generally the utility packages that make Oracle special
DIR - directory support (I think)
EXP - export/import support
HS - heterogeneous services
LOGMNR - log miner
SCHEDULE- scheduler
STREAMS - advanced queueing streams component
XDB - XML DBMost of these are documented in the feature related docco at http://www.oracle.com/pls/db102/portal.portal_db?selected=1 - a place you should visit often, once you are comfortable with the docco at http://www.oracle.com/pls/xe102/homepage
Message was edited by:
forbrich
By the way - feel free to join us over in the XE forum, where XE specific questions are discussed. Registration link on the XE 'database home page' if you have the database installed and running properly. -
What are all those .pkg files in the Receipts folder?
If I see files for several versions of the same, updated, program, can I delete the all but the latest file?
They're stubs of the original Install.pkgs, they're used for Software Update to tell what you have installed, & by Disk Utility to Repair Permissions.
I think it may be safe to remove older ones that have a newer version listed, but I haven't experimented much with that since 10.4.11, at which time it helped with Permission Repairs doubly changing permissions on some files.
For safety I'd comprees the whole Receipts folder as a backup, then remove the ones you think you don't need. -
What are all the tables used for this report:
hi
what are all the tables used for this report:
report:
<b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
thanks in advanceTables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R -
Dear experts, I am quite a newbie when it comes to understanding the Mac filing system, as I originally came from the PC world. There's lots of things I dont understand in the iMac file viewer and how to organise and backup my photos is an important issue for me.
I know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Question 1 - What are all these folders for?
Please can someone explain what is the difference between all the folders I see? Some of them seem to be exact duplicates of the others e.g. Masters, Modified and Originals all seem to have the same content. So here is a list of folders that I see. What is in them?, or what is their purpose?
Data
Data.noindex
Modified
Originals
Apple TV Photo Cache
Attachments
Auto Import
Backup
Caches
Contents
Database
iLifeShared
iPod Photo Cache
Masters
Previews
ProjectCache
Thumbnails
Question 2 - Which photo folder should I back-up?
If I want to keep a physical backup of my photos, which of the above folders should I copy to an external hard drive? (I use Get Backup to automatically copy all important new or changed files to an external drive)
Question 3 - Using the cloud: What is the best way to backup my large photo library in the cloud safely?
I would like to have some kind of safe backup in the cloud for my photos. However the size of the iphoto library is huge at 165GB. Even the Masters folder is huge. It is 130GB. Is it possible to back up files of this size in the cloud? I have a couple of services called photo streaming and Dropbox, but they don't seem to be able to handle this kind of size. Photo streaming only works with 1000 photos (as far as I can tell), and my Dropbox probably has a limit too. I guess it's about 5GB. I am already using about 3GB of my Dropbox space for other files. I would consider both paid and free solutions.
Many thanks to all the experts for your help!know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Don't do that. That's like opening the hood of your car and trying to figure out what all the different bits and peices are and which you can yank out and dispose of. Simply, there are no user-serviceable parts in here.
So, your Question 2:
You back up the iPhoto Library as a single unit.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
Your question 3:
There is no good back up to the Cloud. There are a couple of reasons for this. One is that the datasets are so large and the cloud services shapre their download speeds. This means restoring can take days to complete. Then, and this is the big problem, the iPhoto Library needs to sit on a disk formatted Mac OS Extended (Journaled). Bluntly, no servers online are formatted appropriately, and if the Library is written to - by an incremental back up, for instance - there is a very high likelihood that the library will be corrupted.
Your Question 1:
The Library you're describing there sounds like one that has been updated a few times. Not everything you list there is a folder. Some will be aliases.
The Data folders hold thumbnails.
The Masters and Originals folders hold the files as imported from the camera
The Previews hold the versions of the edited photos that are accessed via the Sharing mechanism.
I think if you look losely that you'll notice that one of the Data folders and one of either the Masters or the Originals folders is actually an alias.
Everything else is a database or cache file of some form. All are required for iPhoto to work.
As an FYI:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491 -
CUBE - If it is not mandatory, what are all the things to compromise?
If having CUBE in Unified Communications infrastructure is not mandatory, what are all the things that needs to be compromised? I understrand CUBE provides security, interoperability and all.
If we don't have CUBE update installed in VoIP gateway, the coexistence of SIP and TDM trunking will not work? Please help me understanding this.Thanks Aaron.
So, you saying the calls from VoIP Phone -> CUCM->VoIP Gateway->SP via PSTN->Destination VoIP Gateway->Destination UCM->Phone doesn't require CUBE. In this case, the destination need not to be a SIP enabled device (need not to be a VoIP phone?)?
And for the calls from VoIP Phone->CUCM->VoIP Gateway->SP via SIP->Destination VoIP gateway->CUCM->VoIP Phone (Here destination phone is a SIP enabled device?). Let me know your comments please. -
What are all the fields covered in the Raw file received from the Card Co
Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1. Name of the Employee
2. Company ID
3. Credit card number
4. Currency
5. Amount
6. Exchange rate
7. Date of Transaction
8. Description
9. Document no.
10. Expense type
11. Expenses paid by company
Waiting for a positive response from your side
Regards,Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM -
How to find what are all the rules and events are monitoring for specific server in SCOM 2007
how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
when s.HealthState = 1 then 'healthy'
when s.HealthState = 2 then 'Warning'
when s.HealthState = 3 then 'Critical'
else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName -
How to identify what are all the events are created in background jobs?
Hi all,
how to identify what are all the events are created for background jobs. And what events gets triggered for a particular job.
thanxs
harithaHi Haritha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
Also Pls check DB02 for database performance and ST03 for workload .
Analyse u will have an idea ,
*pls assign points,if info is useful**
Regards
CSM reddy
null -
What is Reservations in MM & what are all the settings?
Hi SAP Experts,
What is Reservation? what are all the configuration settings needs to be done to implement Reservations?
can you please help me out by giving detailed information about Reservation?
Kindly do on priority basis
Regards,
SomuHi
Not much configuration is required for reservations.
In IMG -- MM -- Inventory and phy inventory management -- define default values
Here you need to mention number of days within movement allowed will activate automatically for eacha plant.
No. of days the reservation can be retained without deletion
Dyanic availability check: Here you can mention avalability check requirement during Goods movements.
Reservations:
It is a simple MM functionality, here based on the requirement different user departments will create the reservation for future required dates.
That will help procurement departments to plan for the materials as well accountability of various goods issues.
Same can be done through MB21, MB22 for create and change respectively.
Regards,
Krish -
What are all the errors that can be corrected by using tran code rsrv?
hi all,,
what are all the errors that can be corrected by using tran code rsrv?
can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv.
regds
hariHi Kalyan,
I have urgent need of the RSRV DOCS.
Can you mail it to [email protected]
I will highly appreciate.
Thanks in Advance
SS
Points will be awarded -
What are all the components and attrubutes of the SAP script
hi
what are all the components and attrubutes of the SAP script
please reply
thanks in advanceHello Ashok,
The componest of the Script are:
HEADER,PAGES,WINDOWS;PAGE WINDOW;PARAGRAPH FORMAT AND CHARACTER FORMATS.
THE HEADER WILL HAVE THE ATTRIBUTES OF THE SAPSCRIPT LIKE
DESCp.PAKAGES Etc.
If useful reward points.
Regards,
Vasanth -
What are all the types of Function module?
Hi,
What are all the types of Function module.
Pls reply me.Hi,
Function modules are one element. There are no types. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.
There is no different function module types , but calling the function module will be different.
check this function calls syntax
1. Calls a function module:
- CALL FUNCTION func.
2. Call a function module in a different mode (asynchronous Remote Function Call):
- CALL FUNCTION func STARTING NEW TASK taskname.
3. Call a function module in the update task:
- CALL FUNCTION func IN UPDATE TASK.
4. Call a function module in a remote system (Remote Function Call, RFC ):
- CALL FUNCTION func DESTINATION dest.
5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):
- CALL FUNCTION func IN BACKGROUND TASK.
qRFC with output queue
6. Call a function module that can be activated in the context of enhancements:
- CALL CUSTOMER-FUNCTION func.
plz go through the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
Thanks,
Reward If Helpful. -
What are all the disadvantages of Crystal Xcelsius
what are all the disadvantages of Crystal Xcelsius
who Introduced Xcelsis
Which Company designed this software
what are all the advantages of Crystal Xcelsius
Applications
BenifitsHi,
Function modules are one element. There are no types. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.
There is no different function module types , but calling the function module will be different.
check this function calls syntax
1. Calls a function module:
- CALL FUNCTION func.
2. Call a function module in a different mode (asynchronous Remote Function Call):
- CALL FUNCTION func STARTING NEW TASK taskname.
3. Call a function module in the update task:
- CALL FUNCTION func IN UPDATE TASK.
4. Call a function module in a remote system (Remote Function Call, RFC ):
- CALL FUNCTION func DESTINATION dest.
5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):
- CALL FUNCTION func IN BACKGROUND TASK.
qRFC with output queue
6. Call a function module that can be activated in the context of enhancements:
- CALL CUSTOMER-FUNCTION func.
plz go through the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
Thanks,
Reward If Helpful.
Maybe you are looking for
-
Format XML data when writing to a file
Hi, I am trying to write runtime data (XML) to a file. I am doign the following to write to the file: public void saveFile() throws Exception { try { TransformerFactory transformerFactory = TransformerFactory.newInstance(); Transformer transformer =
-
Transaction CJI3 in portal Problem
Dear Friends, We are working with CJI3 Transaction in Portal that is linked to a BW Report , the flow is BW report should flow to CJI3 by taking the Projects as Input and gives the Output along with Summarization of Cost Centers, The Problem now is w
-
Output_idocs for 2 suppliers
I have question in output determination process? Scenario: we need to send the release to two partner at a time with same output type, say for example initially we need to send the information(delfor/deljit) to logistic provider u201CAu2019 up till c
-
Hi, I am learning JSP. I made this page which takes up user name and roll and prints it.Can you please show me how to do this in a more better way. Such as instate of 3 page can I combine it into two or any thing that you have in mind... Thank you ve
-
Hi, I hope that, somebody can help me with this issue. I just have entered to a new company as a Basis support but I found out that the SAP R/3 System users of this company, use to share they users and password in order to access the system, and now