What are test conditions?

Hi,
My company has asked me to develop test conditions for the following scenario. We are developing a new comp. code and I need to develop the tests for this. The process flow is that we bought a company. So it is an Asset under Construction. We create the P.O. --> Internal Order --> AUC . I need a scenario test/conditions for this process. Also any reading material on developing test conditions and scenarios would be very helpful.
Will Assign Points
Thanks

<a href="https://wiki.sdn.sap.com/wiki/display/BPX/Testscript-Sampleforbasicprocurement+process">Sample Test scripts, Customize for your AUC process.</a>

Similar Messages

What are the condition value colours in sales oder condition tab

Hi SAP Guru's,
I would like to know how many colours is their in for pricing condition values in sales order.And kindly explain the colours functionality.
Thanks&Regards
Vikram.M

hi,
Here are the steps.
1.Create a Characteristic called ZColour(Standard SAP has a characteristic called colour.I did not use it.)
Give your values.
Say, Red & Blue
2.Now create another characteristic called ZCol_surcharge
Give the description and go directly to Addnl Data Tab.Here in the table name Enter "SDCOM" and in the Field Name Enter "VKOND".The system will pick up the format from the Dictionary.
3.Now go to CT04 and change the Characteristic Zcolour.
Go to values tab and select RED.Goto Extras-> Object Dependencies->Editor and then select Procedure.
In front of 000010 Enter $self.ZCol_surcharge='RED'.
Similarly Select Blue and enter $self.ZCol_surcharge='BLUE'
3.Link both these characteristics to the Class(The class which you have attached the KMAT Material).
4.Go to VK11 and the Enter VA00.Then give the values RED and BLUE and enter the values.
5.Go to your order and Enter your material.
I think this is what you wnated..
**IF YOU FEEL THIS IS USEFUL THEN JUST REWARD POINTS**

What Are The Conditions that Make OpenCL Unavailable?

Up to 2 days ago I had ATI Catalyst 12.2 installed. I was able to check all the boxes in the Advanced Graphics Processor Settings dialog and they stayed set. Specifically, I had [ ] Use OpenCL set and Photoshop CS6 worked very well.
Because I need to know about the quality of newer drivers for my own product development, I upgraded my ATI driver suite to the current version - Catalyst 12.4.
Unfortunately, this caused new problems I hadn't had before - specifically a number of GPU-accelerated features didn't work, such as Oil Paint, which would appear to try to start then just exit a split second later. And with Catalyst 12.4 the [ ] Use OpenCL setting became unavailable (grayed-out).
With my own testing done, I decided to completely uninstall the ATI Catalyst 12.4 suite, and drop back to Catalyst 12.2.
This was a simple matter of uninstalling everything AMD then rebooting (with the Windows driver), then installing Catalyst 12.2. That went smoothly.
However, now I still do not find the [ ] Use OpenCL box has become available again - it's grayed out:
I'm pretty sure there are no remnants from the 12.4 drivers left on my system (though there's a possibility I could have missed something), and everything from the 12.2 set installed successfully, so the question is this:
Did Photoshop sense something about the 12.4 driver set, then set some kind of permanent "No OpenCL" flag in its own configuration settings?
Here's my system info with the 12.2 drivers installed. Note the "OpenCL: Unavailable" entry.
http://Noel.ProDigitalSoftware.com/ForumPosts/SystemInfo.txt
Note that all my GPU-accelerated features seem to work... Oil Paint works and is plenty fast, the various Blur tools work nice and fast, I can do 3D rendering (though there's one small glitch I've had since Photoshop CS6 was released where occasionally it becomes unresponsive for a few seconds at a time while doing 3D work). But it does finally respond.
-Noel

Thanks for the info.
I understand what OpenCL is about, and to some extent at least the code should be portable, since there are standards that the implementations follow.
But whether Adobe's code IS portable to all video cards, or whether all video drivers/cards implement the same standards, or even whether all video drivers/cards implement the standards correctly is always in question.
From what I can see whether Photoshop CS6 is willing to consider the OpenCL in the ATI/AMD Catalyst 12.2 package good enough to use comes and goes. The [ ] Use OpenCL box may be grayed out in some runs of Photoshop and not in others. I've personally set the option, had Liquify come up and run fine, and then later (in another run of Photoshop CS6) found [ ] Use OpenCL unchecked and grayed-out - and STILL had Liquify come up and run fine. I suspect this is because there are a number of different ways Photoshop is willing to try to do the work, and it's falling back to an alternate strategy.
In Catalyst 12.4 I would NEVER see the OpenCL setting available, and in fact Liquify wouldn't even come up.
I assume the support for what Photoshop needs is marginal in the recent ATI/AMD drivers, but it would be good to know a little more about why the OpenCL setting comes and goes like it does.
-Noel

What are the conditions to use hotpatch

Hi Experts.
What is the criteria for deciding whether hotpatch can be used?
From what I gather, the following is used as a guide:
the patch is small
it doesn't update any executable
Is there anything else I should check?
Thanks in advance,
DA.

Dan,
What is the criteria for deciding whether hotpatch can be used?There are no specific criteria and it depends of what the patch is doing -- Check the patch driver/README file.
From what I gather, the following is used as a guide:
the patch is small
it doesn't update any executable
Is there anything else I should check?No.
https://forums.oracle.com/forums/search.jspa?threadID=&q=hotpatch&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

What are the conditions to be able to delete PO line items?

Hello All,
We are trying to delete a PO line item as we are unable to make corrections on the Service Entry of that PO - invoice was deleted but generated a credit memo - also tried unsuccessfully to delete PO line item but got failed.
Please provide any solution to this issue.
Regards
Kalyani
Hyderabad

Hi Kalyani,
you can reverse the invoce by using MR8M and then delete the PO.
and then delete the p.o.
Hope, you have not done any GR.
Is there is any release strategy involved? Pls. check.
Regards
Rifaie.M

What are the conditions required to run the F110 without doing EDITproposal

Hello,
masters,
am facing the problem while doing F110 for customers, to select more number of invoices i wish to do F110 without selecting the edit proposal.
for this am giving payment method and housebank etc., in invoice itself, but am unable to complete the F110 without selecting edit proposla and selecting the doc and inser the payment method , house bank and house bank id.
could any one please help on this.
Thanks & Regards,
Nagesh

HI
Goutham thanks for your answer, but my intention is to do number of invoices at a time, for each invoice to select and edit proposal giving payment method, and house bank and house bank id, to do all these is a very lengthy process, that's what i require suggestion how to do with out selecting edit proposal and do all the abvoe.
any body can advise on this.
thanks and Regards,

IPhone 5 Replacement, what are the conditions?, how is my condition?

Hey guys, i just recently bought an used iPhone 5. the phone has guarantee until 2nd Feb 2014
So, here's my problem
on the first day of my new phone, suddenly the microphone for FaceTime, Video recording, and telephone is not working
i've asked the guy on apple store, he said that they can fix it for 10 minutes, or they can replace it with a new one (which is very very nice).
so then i made a schedule for Genius Bar on next monday 16th Des.
What do you think guys?, will i get a replacement?
thank you so much for your opinion/answers

TimothyJohnJ wrote:
so, it depends on me whether i want to replace it with a new refurbished one or stay with the old phone?
Correct.
TimothyJohnJ wrote:
the thing is, mine is now a bit messed up, on the top right corner, the guy who sold this phone had dropped it, so its a bit bent and cracked now. will they able to replace it? thank you
In that case, it may be better to get a refurbished phone. Note that the Apple Retail Store may charge you for it, but if not, much better

What are the conditions that will cause the VME-MXI-2 to assert ACFAIL* low?

In my application I have the VME-MXI-2 card setup as a non-slot zero device. I am trying to write data to its base address +1k from our in house system controller (slot zero device). While monitoring the status lines, I see the ACFAIL* line asserted low during the transaction.
Can you provide me with the signals/lines the VME-MXI-2 card is monitoring that would cause the ACFAIL* signal to assert low? I did disable the VUCR register (x18 to FFC0) so that the signal is not being produced/propagated from the MXI side of the bus.
The joy of the VME bus...
Thanks,
Joe

Hi Joe,
The VME-MXI-2 manual has more information on the ACFAIL* signal. More specifically, chapter 4 and the VISTR section.
Do you see this signal asserting at any other times, or is it just in this situation?
Regards,
Adam W
Applications Engineering

What are to conditions to move to Lightroom CC even if I already bought the upgrade for LR6?

Hello all,
I upgraded my LR5 to LR6 but looking at the mobile functions think about moving to Lightroom CC. Is this possible without paying the full monthly price? can I get refunded from my upgrade?
Thanks
Herve

i think you can cancel your purchase and get refunded within 30 days, Return, cancel, or exchange an Adobe order

What are output condition records?

Hi all,
Please refer to documents/files or threads if needed...
Thanks,
Charles.

This is related to IDocs..

What are the major components in class?

1)     What is the purpose of load-of-program? When it will be trigger?
2)     Write the code for displaying the three parameters in single line with the first parameter as mandatory in the selection screen?
3)     Which event triggered whenever the user call the function BACK, EXIT, CANCEL?
4)     What are the major components in class?
5)     What is the functional module is used to get popup screen for ALV reports?
6)     Which type of pool is used to get drop-down list?
7)     What is the tcode for creating the variant truncations?
8)     Is it possible to call LDBs number of times in same report?
9)     What are the conditions to use control break statements in our report program?
10)     What is the use of range statement?
11)     What is the difference between normal reports and alv reports? With comparing to normal report are there any disadvantages in alv reports?
12)     What are the components used to suppress the fields in the selection-screen?
13)     What is the standard program to transport selection screen variants?
14)     What is the event keyword for defining event block for reporting events?
15)     What is the specific statement use when writing a drill down report?
16)     What are the different tools to report data in sap?
17)     Write the menu path to create a selection text in reports?
18)     How do we omit the leading zero s while formatting outputs in reports?
19)     What are the report truncations?
20)     How do we align selection input in single row?
21)     How do we suppress the display of input fields on selection screen?

this forum is not for answering your interview questions...if you stucked with any realtime problem then post...please try to respect forum terms and conditions.
Thank you.

What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

What are the best apps to monitor tests and emails on childs phone

what are the best apps to monitor tests and emails on childs phone?

You could simply log into your child's email with the password that the two of you agree upon, and monitor the emails manually. As for the texts, you could purchase a separate device, and use the child's Apple ID to monitor the iMessages. For SMS/MMS, no way to monitor it. You'll have to use the app called 'Random Parental Inspections'.

What are the things to be test in Portal Upgrading the ECC from 5.0 to 6.0

Hi ,
I never been as part of the ECC upgrade project. we are going to upgrade our ECC system from 5.0 to 6.0. Also we have SAP portal in the landscape. Can any body guide me for the following points related to testing the Portal once ECC upgrade is done.
What is the approach need to be followed.
What are things need to be tested.
what kind of test scripts need to be created.
Please provide your suggestions and ideas..
Thanks
vijay

Hi,
In Upgrade you need to do all integration testing and check all functionalities.
Thanks
Sunny

What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
can give the information about the below questions
whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
and what are the better load/performance tools available for Flex Remote Objects?

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

What are test conditions?

Similar Messages

Maybe you are looking for