What are the basic components in the library plugins folder.

What are the standard plugins in the Library/Plugins folder for Snow Leopard? I'm trying to figure out what I can uninstall and I have no clue.

It probably contains the empty folders Components, HAL, MAS, and VST. (I'm not sure, since my folders do contain stuff.) But none of Apple's standard effects and instruments are sitting there.

Similar Messages

What are the basic difference in the putting a variable in Query

what are the basic difference in the putting a variable in
1. Characteristic Restrictions Vs 2. Default Values

Example - Cost Center Analysis Report - If I have Controlling Area in
Char Restricitons Only - I have restricted it to say ABC Controlling Area or a Variable- Report will be hardcoded to ABC Controlling Area or the Input Value entered during Runtime - After Execution, The Same cannot be changed in the report.
Assuming I will not have Controlling Area in the report means not in Rows n Columns.
You might have seen no change - > Did you place material in Rows or Columns ?

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

What are options available to cancel the Excise Invoice?

Hi,
What are options available to cancel the Excise Invoice?
Does cancelling the commercial invoice automatically cancels the excise invoice
if not what are the other options?
Any settings required to achieve that.
Usefull answers will be rewarded
Thanks
Regards

Dear Rajiv
No cancelling commercial invoice will not cancel the excise invoice in background. For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group. Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
thanks
G. Lakshmipathi

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.

Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380)

What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

My question today: What are strengths and weaknesses of the
sap.m.Shell
and
sap.m.App
as container for an application wrapper?
I currently use non of them, but I see the advantages.
SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

We prefer to say, the tender mercies of the Fetch block.
You'll notice the "wfm info" cluster as an output of the Fetch
VI. This cluster has gain and offset members- use these to scale
your binary data to floating point voltage representation.
As you point out, the numbers won't be exactly what you expect given
the vertical range and the device resolution. There are a few
reasons for this. First, we don't use the absolute full scale of
the ADC for the maximum input voltage. There are a couple of
codes of headroom at the top and bottom. This allows your input
signal to slightly exceed the specified vertical range without clipping
(you'll get a warning from the driver). Second, these gain and
offset numbers take into account calibration information for your
device. Using these numbers will correct for small deviations
from the ideal offset and gain.
So if you use the gain and offset numbers from the driver, your
measurements will be more accurate than if you assume 0 offset and
perfect gain. They will be most accurate if you make sure to
perform a self-calibration once the device is in your system and at the
temperature that your tests will be run.

How to view what are all programs maped with the event....

I am new to this events concept - could you please say
in SM64 we can give Event....
<b>How to view what are all programs maped with the event..</b>
Thanks in advance.

Hi Sam,
See these links:
How-to trigger a process chain using ABAP?
Re: scheduling process chain 3 specific times a day
NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
Hope this helps.
concerning to sm64 ..
Triggering events manually ...
Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
example : JOB_OPEN to create a background job..
When scheduling a background job, you can specify it to start "after event".
If you do so, you'll have to create an event in SM62.
If a job is scheduled after event event and you trigger the event with SM64, the job will start.
Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
Reward if helpful.
Regards,
Harini.S

Ideas to display which component drives the other components in the canvas

I have 4 components in my canvas and I would like to learn some ideas from gurus on what are the best ways to display which component drives (drills down) the other components in the dashboard. Any info would be appreciated.

Hi,
There is no such rule on which component should drive other in Xcelsius. It all depends upon the data that you are using. Always a component with summarized data should drive a component with granular data. For eg: If you are showing Total sales in a country using Column chart and want to drilldown to the percentage of sales in each region of a particular country , you can use pie chart to show it. Here Column chart drives Pie chart and u can show this in other way also.
Hope it helps!
Thanks,
Arun US

Lost the CNi components on the Controls toolbar

I am using Componentworks++ with Visual C++. My CNi components went away on
my controls toolbar. If I try to add them from the Components and Controls
gallery, the non-CW++ controls are added instead (they have class names that
start with CW instead of CNi). Does anyone know how to re-attach the CW++
components? If not, are their differences/problems in using the CW
components from the Component gallery instead?
Thanks,
Mark

We haven't seen this happen before with an existing project created from the
wizard. I'm not sure what happened, but the GUID must be added back to the
DSP file manually. There is a KB document that explains how to add support
to an existing project that should help you: http://digital.ni.com/public.nsf/72899cb3b87fba9f862567f20062b775/0cb6707522e92c958625689e0052bb77?OpenDocument&Highlight=2,toolsadditionalinfo
Best Regards,
Chris Matthews
Measurement Studio Support Manager
"Mark Greenman" wrote:
>I am using Componentworks++ with Visual C++. My CNi components went away
on>my controls toolbar. If I try to add them from the Components and Controls>gallery,
the non-CW++ controls are added instead (they have class names that>start
with CW
instead of CNi). Does anyone know how to re-attach the CW++>components?
If not, are their differences/problems in using the CW>components from the
Component gallery instead?>>Thanks,>Mark>>

I was processing pictures and the Basic function on the right has disapeared ( the one that has Exposure etc) I know see the Histogram, then Tone Curve, HSL/Color/B

I was processing pictures and the Basic function on the right has disappeared, the one that contains Exposure, Contrast etc. I now have only the Histogram, Paint Brush etc, then it goes to Tone Curve, HSL/Color/B&W and all others down to Camera Calibration. How can I recuperate Basic ?? Thanks for your help

i have now found where the OS permission is located but cannot find a way to change it. Here is what I have done:
- Selected the Local Disk Folder
- Chose File>Get Info
- Click on Sharing and Permissions (It shows Read Only)
Now this is where I am stuck, the instruction in Apple Support says "Select a user or Group from the Name Column then choose the following Pop-Up menu in the Priviliges column(this is where the Read &Write option should be. I can't choose a user or group under the name column, all I have in the Name column is "Local Disk"
Can someone help me from here to convert to Read & Write, thanks

Since the 12/9/14 update of Adobe Acrobat XI Standard to 11.0.10 I have lost the basic colors of the highlighting tool. How do I fix this?

Adobe Acrobat XI Standard to 11.0.10 I have lost the basic colors of the highlighting tool. How do I fix this?

Hi,
It appears that this was a bug that was introduced in the latest update. Others have been able to resolve this issue by using the Acrobat Cleaner tool to uninstall and then reinstall Acrobat. You might try this if you have a few spare moments.
And can you please share the problem PDF which was working correctly in the earlier version.
Thank you

The "Basic" component of the Develop module in Lightroom 5 disappeared

Out of the blue, the Basic component of the Develop module disappeared. How do I get it back?

Mac Cmd/1
Windows Ctrl/1
OR
Right-click on one of the other panel headers (Tone Curve, Detail, etc.) and make sure there is a checkmark in Basic.

I upgrade from LR3 to LR5 and the basic panel is the old format...does not have the new sliders that

and the basic panel is the old format...does not have the new sliders that were introduced in LR 4. Using Windows 7 if that matters.
still seeing fill light and recovery instead of shadows and highlights
thanks
jp

You have to change the photo to Process Version 2012.
Under the histogram in the develop module is a Lightning Bolt icon. Click on it.

Can you have two detail lists from the basic list at the same time?

Hi
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
Thanks
Venkat

No   ... it is not   possible   of   2 detail list at   one time   from the basic list ...
you can increament   the SY-LSIND .... But you can not   display both the windows   at single time ...
it is possible to display 2 Detail list in ALV   ...... from one basic list   using the Blocked list concept    .
Sample Program on BLOCK LISTS
Report   zblock_list
* Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:slis.
DATA:x_layout TYPE slis_layout_alv,
t_field TYPE slis_t_fieldcat_alv,
*--field catalog
x_fldcat LIKE LINE OF t_field,
*--to hold all the events
t_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
t_sort TYPE slis_t_sortinfo_alv,
x_sort LIKE LINE OF t_sort ,
*--Print Layout
x_print_layout TYPE slis_print_alv.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE add_catalog.
clear x_fldcat.
x_fldcat-fieldname = &1.
x_fldcat-seltext_m = &2.
x_fldcat-outputlen = &3.
x_fldcat-tech = &4.
x_fldcat-col_pos = &5.
x_fldcat-no_zero = 'X'.
x_fldcat-ddictxt = 'M'.
x_fldcat-datatype = &6.
x_fldcat-ddic_outputlen = &7.
if &6 = 'N'.
x_fldcat-lzero = 'X'.
endif.
*--build field catalog
append x_fldcat to t_field.
END-OF-DEFINITION.
*----- data declerations.
data: v_repid like sy-repid.
data: begin of itab occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
meins like mara-meins,
end of itab.
data: begin of jtab occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of jtab.
select matnr ernam meins
up to 20 rows
from mara
into table itab.
select matnr maktx
up to 20 rows
from makt
into table jtab.
v_repid = sy-repid.
*DISPLAY alv
* Initialize Block
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid.
*Block 1:
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
x_events-form = 'TOP_OF_LIST1'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'ITAB'
it_events = t_events
it_sort = t_sort
tables
t_outtab = itab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
x_events-form = 'TOP_OF_LIST2'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
* Append table block.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'JTAB'
it_events = t_events
tables
t_outtab = jtab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* exporting
* is_print = x_print_layout
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_list1.
skip 1.
write: 10 'List 1',
/5 '--------------------'.
skip 1.
format reset.
endform.
form top_of_list2.
skip 1.
write: 10 'List 2',
/5 '--------------------'.
skip 1.
format reset.
endform.
reward points if it is usefull ....
Girish

I was trying to do a favor for my gf, and I uninstalled bonjour. What are my next steps with the cloud and ios5

I was trying to do a favor for my gf, and I accidentily on purpose uninstalled bonjour. It has seemed to really screw up iTunes for me. What are my next steps to get this back to normal? I have downloaded and using the icloud and ios5. I have two iPhones 3gs and our iPad2. And our computer is windows xp(yes it is time for an upgrade)

Try the troubleshooting help here. http://www.apple.com/support/iphone/assistant/phone/
You may need to restore your iPhone.
If it won't restore, try here. http://support.apple.com/kb/ht1808
If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange.

What are the basic components in the library plugins folder.

Similar Messages

Maybe you are looking for