What are the privledges for each level of the support communities

do i need to say more?

Hi:
That is a question I have never had before!
I have been posting on Apple's user-to-user forums for over 10 years.  Before I began trying to help others, I received a good deal of very helpful information from other people.The time I spend varies - depending on what I am doing that day and my own interest level in reading posts (and then trying to suggest approaches to problems).  Since I retired several years ago,  I spend more time here than when I was working.  People who post here are all volunteers - this is not a job for us.
The Level 7 is something new when Apple released the new ASC and re-defined the levels.  In the "old days," I was a L4.  As I recall, it took about five or six years to reach that level.
Points are obtained if the original poster thinks you have helped them (or solved a problem).  The point award is completely voluntary.  In my own experience, I probably get points from every fifth or sixth post I make.  Either I do not give useful advice or the OP is unaware of the point thing - or just not interested. 
In summary, we would not do this if we did not genuinely get satisfaction from trying to help other people.  It can be frustrating at times, but mostly more positive than negative.  When I dipped my toes in the water and began trying to use my limited knowledge of Apple computers to help others, I was tentative.  One of the positive things I have personally gotten from reading all these posts is that I have learned a great deal from others over time. 
I got wordy...sorry for the windy answer to your question.
Barry

Similar Messages

  • What are the supported Platforms and system requirements for JSE?

    What are the supported Platforms and system requirements for JSE?

    Hi There,
    The following are the system requirements & the support platforms for JSE :-
    * Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
    o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
    o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
    * Solaris 9 Operating System (x86 Platform Edition)
    o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
    o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
    * Windows 2000 and Windows XP
    o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
    o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

  • What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?   Question  I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20? Answer  Please see

    What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?
    Question
    I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20?
    Answer
    Please see the list below:
    - IBM SPSS Statistics 18 and 19 releases are supported on Apple Macintosh OS 10.5 (Leopard) and 10.6 (Snow Leopard) with Intel processor.
    - IBM SPSS Statistics 20 release is supported on Apple Macintosh OS 10.6 (Snow Leopard) and 10.7 (Lion) with Intel processor.
    - The IBM SPSS Statistics versions 18 and 19 are not supported on Mac OS 10.7 (Lion).
    THIS MEANS THAT TO USE LION ONE FIRST HAS TO UPGRADE TO SPSS STATISTICS 20.

    Whilst the 2012-02-15 edition of IBM's matrix does not mention Lion, a few users have noted that:
    • 18.0 can be troublesome
    • an updated version of 18.x should be better.
    Related files
    PASWStatistics_1 803_Mac_Patch.dmg and IBM SPSS Statistics 18.0.3.4 Hotfix Mac.zip are no longer available from the spss.com domain, and I could not find them in an IBM domain. If you download from unofficial sources, proceed with caution.
    Related pages
    In Apple Support Communities:
    • will PASW (SPSS) 18 work with LION
    • PASW statistics 18 crashes every time
    • Java Virtual Machine & SPSS 18 with a question from me.
    Elsewhere:
    • SPSS on Lion « Decorator Pattern
    • SPSS / PASW Mac Patch 18.0.3 and Graphing Fix | The Personal Website of Philip Fizur
    • Patching PASW 18 (or SPSS 18) for Mac OS X (Leopard, Snow Leopard, Lion) to version 18.0.3.1
    • and other sources, including one domain that I treat as reputable but I'll respectfully not share that link here.
    At a glance, you might find that 18.0.3.4 is compatible with Lion.

  • What are the supported countries?

    What are the supported countries in order to be able to convert and export?

    Hi dollyp56,
    The ExportPDF online service is available for purchase in the following countries: Countries where ExportPDF is available for purchase.
    If you're wondering what languages are available for text recognition, please see this document: Using OCR in Adobe ExportPDF.
    Please let us know if you have additional questions.
    Best,
    Sara

  • What are the supported uplink modules in the WS-C3850-48F-L?

    Our company has two offices, but the distance between them is a little far. I want to connect the network between the two offices with fiber, But our company is using Cisco Catalyst 3850 Switches , So what are the supported uplink modules
    in the WS-C3850-48F-L?

     The WS-C3850-48F-L supports the following uplink modules:
    4 x 1GE network module C3850-NM-4-1G=
    2 x 1/10GE network module C3850-NM-2-10G=
    4 x 1/10GE network module C3850-NM-4-10G= 
    http://www.3anetwork.com/cisco-ws-c3850-48f-l-price_p1839.html

  • What are the support or replacement options for my out of warranty phone?

    My beloved 3G, that I use now as a jump drive and an iPod, just died. Dead dead. No response from any buttons, no reset ability, no restoring... Nothing, other than if i charge it it gets really hot. Really really hot.
    I have purchased two MacBooks, four iPhones and one iPad over the past three years for myself and my family, and I am wondering what support apple will offer me for my new doorstop. I know it won't be free and I understand that..... But????? Anything? Anyone know? Can I upgrade? Replace? Repair?
    Thanks in advance.

    There is nothing special provided in this regard regardless how many Apple products you have purchased over the last 3 years.
    Apple offers an out of warranty or not covered under the warrant "repair" price, which pays for an exchange for the same model at a significantly reduced price off what was the full retail sales price. The cost is $199 plus applicable sales tax and the exchange will include a 90 day warranty. This does not require signing a new two year contract with AT&T. This will be for another 3G - the same color and storage capacity. Not sure if Apple offers this for an iPhone that is no longer activated with AT&T, but as already provided, there will be no charge at an Apple store to have a diagnostic check run on your iPhone to determine where the problem lies. If only the battery, Apple has a price to replace the battery only, or you can use a 3rd party for this, or try to do it yourself if you are so inclined.
    http://www.apple.com/support/iphone/service/faq/#warranty7

  • What are the supported feature for LYNC Server 2013 WITHOUT Telephony

    Hi
    I have a new customer who is asking for LYNC Server 2013 without to use VoIP Support.
    The would like to use the LYNC-SKYPE connectivity but without LYNC calls.
    Most of their internal users are using SKYPE.
    The Question is now, what Features are possible for example:
    FEATURE-LIST
    See other’s presence
    Manage own presence
    See presence in Office
    Contact management
    Contact card
    PC-PC and multiparty IM
    PC-PC and multiparty file transfer
    Persistent Chat
    PC-to-PC computer audio calling
    PC-to-PC computer video calling
    PC-to-PC presence display, IM, audio, and video with Skype users
    But what of the above feature list is possible without using VoIP ??
    And how works that LYNC WebApp Client without VoIP? Is it possible to route Audio/Video over the internet by using that LYNC WebApp Client in LYNC 2013??
    Thanks in advance ;-)
    Kind regards
    Michael
    Kind regards Michael Damaschke

    All of that is possible without PSTN connectivity or the plus cal.
    When you say VoIP, do you mean audio chatting over TCP/IP in the purest form, or do you mean specifically telephone calls?
    Technially PC-to-PC computer audio calling is VoIP, or voice over IP, but if you're talking about connecting it to a PBX or the phone network, you don't need it for any of the above.  It works wonderfully and is quite a bit cheaper without it due to
    fact that you won't need to license the plus cal for enterprise voice or the Exchange enterprise cal for voicemail. 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • How to find what are  the  support-teams map with particular componant type

    hi experts,
    i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
    Regards,
    Kumar..

    Hi Kumaresan-
    I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
    The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
    Click on the Responsibilities Tab
    Create your responsibility based on your support team requirements
    Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
    Highlight a responsibility and click Change
    In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

  • What are the supported countries to sell paid iphone applications

    Hello,
    I want to know what is the list of supported countries to sell paid iphone applications.

    Hi dollyp56,
    The ExportPDF online service is available for purchase in the following countries: Countries where ExportPDF is available for purchase.
    If you're wondering what languages are available for text recognition, please see this document: Using OCR in Adobe ExportPDF.
    Please let us know if you have additional questions.
    Best,
    Sara

  • What are the supported secure protocols between BizTalk 2013 R2 and Iguana HL7 interface

    We are working on project where we want to transmit HL7 messages securely from BizTalk 2013 R2 to Iguana HL7 interface and receive Acks/Nacks. We came to know that MLLP adapter doesn't support SSL and the other option we are thinking
    is HTTPS.  Are there any better options available other than these 2 options which are supported by both BizTalk and iguana.
    Also I read the following article
    http://help.interfaceware.com/kb/164

    Have you gone through above post .It clearly state 
    ACK’s are published when the Messaging Engine successfully transmits a message over the ‘wire’ and the system context property “AckRequired” is written on the message that was sent and it is set to true.
    Both ACK’s and NACK’s have the following system context properties promoted which can therefore be used in filter expressions for routing:
    AckType:
    set to ACK or NACK
    AckID:
    set to the message ID of the message that this ACK/NACK is for
    AckOwnerID:
    set to the instance ID that this ACK/NACK is for
    CorrelationToken:
    flowed from the message to the ACK/NACK
    I would again suggest to go through below link to design your solution
    http://blogs.msdn.com/b/kevinsmi/archive/2004/07/03/172574.aspx
    Thanks
    Abhishek

  • What are the points and levels for on the apple communities

    what are the points and levels for on the apple communities

    You mean these?
    https://discussions.apple.com/community/user_tips_library_documents
    I wouldn't consider 665 tips as being "hardly any", myself.
    Regards.

  • What are the pros and cons of installing java+abap stack for portal?

    Hi all,
      1.What are the pros and cons of installing java+abap stack for portal?
      2.what effect it does on the ume options to be choosen??
      3.for the purpose of integration of r3,bw and crm on portal and crm 4.0 60.2.3 business package which option of stack(java or abap or both)will be good option and which ume option while installation should be choosen?
    regards
    Rajendra

    Hi Rajendra,
    The NetWeaver Installation Master Guide offers some good scenarios on the pros and cons:
    https://websmp201.sapag.de/~sapidb/011000358700005412792005E.pdf
    In a nutshell:
    ABAP+JAVA
    Pros
    - Decrease # of servers required to administer the portal
    - Less costly
    Cons
    - Upgrades could be dependent on ABAP and Java release level
    - Additional load on the server due to ABAP stack
    - Limited scalability
    JAVA and ABAP on separate server
    Pros
    - Improved performance
    - Allows each system to be single-use purpose therefore downtime does not affect other components
    - More scalable
    Cons
    - Adds complexity to landscape
    - Additional costs
    Regards,
    Thomas Pham

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • What are the content conversion parameters for this structure

    Hi All,
    The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
    Schedule D - District/Port List (by District Code) [Produced13APR11]
    District |    Port      |    Name
    Code     |    Code      |
    01       |              |    PORTLAND, ME
             |    0101      |    PORTLAND, ME
             |    0102      |    BANGOR, ME
             |    0103      |    EASTPORT, ME
             |    0104      |    JACKMAN, ME
             |    0105      |    VANCEBORO, ME
             |    0106      |    HOULTON, ME
             |    0107      |    FORT FAIRFIELD, ME
             |    0108      |    VAN BUREN, ME
             |    0109      |    MADAWASKA, ME
             |    0110      |    FORT KENT, ME
             |    0111      |    BATH, ME
             |    0112      |    BAR HARBOR, ME
             |    0115      |    CALAIS, ME
             |    0118      |    LIMESTONE, ME
             |    0121      |    ROCKLAND, ME
             |    0122      |    JONESPORT, ME
             |    0127      |    BRIDGEWATER, ME
             |    0131      |    PORTSMOUTH, NH
             |    0132      |    BELFAST, ME
             |    0152      |    SEARSPORT, ME
             |    0181      |    LEBANON AIRPORT
             |    0182      |    MANCHESTER USER FEE AIRPORT, NH
    02       |              |    ST. ALBANS, VT
             |    0201      |    ST. ALBANS, VT
             |    0203      |    RICHFORD, VT
             |    0206      |    BEECHER FALLS, VT
             |    0207      |    BURLINGTON, VT
             |    0209      |    DERBY LINE, VT
             |    0211      |    NORTON, VT
             |    0212      |    HIGHGATE SPRINGS/ALBURG

    since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
    Regards,
    Ninu

  • What are the steps (High level) needed to implement US Payroll?

    Hi,
    What are the (high level) steps needed to implement US Payroll?
    Please provide any relavent URLs for any steps if possible.
    Thanks,
    Prabakar

    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-PE03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Check Default Payroll Area
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine EE Sub Group Grourping for PCR and Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine Reason for Change
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck Assignment of PayScale Structure to Enterprise Structure
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDetermine Default for PayScale Data
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PaySetup Payroll Period for Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine PayScale Salary ranges
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type Group u201CBasic Payu201D
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Employee Sub Group Grouping for Primary Wage
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Personnel Sub Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionDefine Reason for Change
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type Group u201C Recurring Payments and Deductionu201D
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Personnel Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Define Reasons for Changes
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type Group Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Entry Permissibility for Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    This is not the complete once just for reference purpose i have given it to u
    Edited by: Sikindar on Nov 19, 2008 9:19 AM

Maybe you are looking for

  • Profit Centre Accounting Balance Carry Forward

    Hi I used report painter to create my own report to show the TB by profit centre. But the when you drill down on certain balance sheet account the actual line items date back to as far as 2004. Is it because we have done a balance carry  forward? How

  • Custom Fields in F-28

    Hi Gurus, Wish everyone a happy new year! We have a requirement where client want to add a new field 'Branch Account Name' on the 'Post Incoming Payments Process Open Items' screen (second screen on F-28). This new field would display the name of the

  • Copy command from JDBC

    Hi all, I am currently trying to use the copy command to copy data from a text file into a database table using JDBC. In my Java application I am attempting to execute the SQL copy node from 'node.txt' with Delimiter ' '; where node is the name of th

  • FT: check export license for stock transport order

    Hi Does anyone know how to assign an export license to a STO with outbound delivery? What settings do we need? ps: we don't have GTS. Kind Regards

  • Negative Screen with fuzz lines

    So i looked through all the negative screen answers but they didn't seem like quite the right fit. phone was dropped off a chairlift in december. found in june. worked just fine for a few days then... been downloading apps from the app store like cra