What are the return values in component interface

Hi,
i need to know what are the different return values while testing(saving the component interface in create or get key) the component interface.

Return value for create is a Boolean value: True if component was successfully created, False otherwise. The return value for get is a boolean value: True if component was successfully retrieved, False otherwise.
PeopleBooks where you can find this (8.49):
http://download.oracle.com/docs/cd/E13292_01/pt849pbr0/eng/psbooks/tpcr/book.htm?File=tpcr/htm/tpcr13.htm#d0e37434

Similar Messages

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • What Are the Index Values of the MTTR and MTBF of the MA5600?

    What Are the Index Values of the MTTR and MTBF of the MA5600?

    The networking environments are different and the device uses different boards. Therefore, the reference value of the MTBF of the MA5600 is 55 years and the reference value of the MTTR of the Field Replaceable Unit (FRU) is two hours. The preceding values
    are only for reference. For details, contact the related Huawei engineers.
    http://www.huanetwork.com/smartax-ma5600-series-price_c43

  • FindAndReplace What is the returned value

    I have found a function used in some NI sample code FindAndReplace() and it doesnt show as a teststand function. Anybody used it or know what the return values are and any optional parameters ?

    Rupert -
    In the TestStand expression language there is a SearchAndReplace function which returns the modified string. What is the code snippet, is it C, C++, expression?
    Scott Richardson (NI)
    SearchAndReplace(string, searchString, replacementString, , , , , )
    This function searches for and replaces one or more substrings with the replacementString.
    Parameter 1: A string in which to perform substring replacements.
    Parameter 2: The substring to find and then replace with the replacement string.
    Parameter 3: The replacement string.
    Parameter 4: An optional number that specifies the zero-based character index at which to begin searching. The default is 0.
    Parameter 5: An op
    tional Boolean that specifies whether to ignore character case when searching. The default is False.
    Parameter 6: An optional number that specifies the maximum number of occurrences of substring to replace. A value of -1 signals the function to replace all occurrences of the substring. The default is -1.
    Parameter 7: An optional Boolean that specifies whether to search the string in reverse. The default is False. If you pass True, the start index passed to parameter 3 specifies the zero-based index from the end of the string of the character at which to begin searching in reverse.
    Parameter 8: An optional number in which the function stores the number of substrings that it replaced.
    Returns: The modified string.
    Scott Richardson
    National Instruments

  • What are the different values available for type attribute

    Hi,
        I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
         Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
    Thanks in Advance,
    Murthy.

    Does this help
    tring
        Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
    CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
    VARCHAR: Varying-length character strings.
    CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
    GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
    VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
    DBCLOB: Varying-length strings of double-byte characters in a large object.
    |BINARY: A sequence of bytes that is not associated with a |code page.
    |VARBINARY: Varying-length binary strings.
    BLOB: Varying-length binary strings in a large object.
    |XML: Varying-length string that is an internal representation |of XML.
    Numeric
        Data that contains digits. Numeric data types are listed below:
    SMALLINT: for small integers.
    |INTEGER: for large integers.
    |BIGINT: for bigger values.
    DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
    |DECFLOAT: for decimal floating-point numbers.
    REAL: for single-precision floating-point numbers.
    DOUBLE: for double-precision floating-point numbers.
    Datetime
        Data values that represent dates, times, or timestamps. Datetime data types are listed below:
    DATE: Dates with a three-part value that represents a year, month, and day.
    TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
    TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
    Regards
    Ravi

  • What are the APN values for Blackberry 9630 Tour?

    I have an application to communicate with my server, what are the values I need to set the APN Settings?

    Or if you're feeling creative, try THIS

  • Propertyname : What are the different values ?

    Hi
    In the tcl script, we frequently use the propertyNamelist in order to set the property. Where can I get the all property names ?
    My requrement is , in an Oracle module I need to set the Metadata location and Data Location. Data Location can be set with the help of the command
    {color:#0000ff}OMBALTER ORACLE_MODULE '$oracleModule' SET PROPERTIES (DB_LOCATION) VALUES ('$locaName')
    {color}
    Like DB_LOCATION, what is the propername of Metadata location ? what are the other propertynames ?
    Thanks

    OMBALTER ORACLE_MODULE '$oracle_module' SET REFERENCE LOCATION '$target_loc'
    You can find all properties here: http://otndnld.oracle.co.jp/document/products/ds10g/1012/doc_cd/bi/B12152_01/s03ombalter.htm#CCHHDIHB
    Regards,
    Detlef

  • What are the default values for "default if unwired"?

    How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
    Is there a listing somewhere of what default values will be?
    Thank you,
    cayenne

    tst wrote:
    Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
    More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Outp​ut-tunnels-from-event-structure-should-default-to-​...
    VERY much agreed!  Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • What are the condition value colours in sales oder  condition tab

    Hi SAP Guru's,
    I would like to know how many colours is their in for pricing condition values in sales order.And kindly explain the colours functionality.
    Thanks&Regards
    Vikram.M

    hi,
    Here are the steps.
    1.Create a Characteristic called ZColour(Standard SAP has a characteristic called colour.I did not use it.)
             Give your values.
             Say, Red  & Blue
    2.Now create another characteristic called ZCol_surcharge
    Give the description and go directly to Addnl Data Tab.Here in the table name Enter "SDCOM" and in the Field Name Enter "VKOND".The system will pick up the format from the Dictionary.
    3.Now go to CT04 and change the Characteristic Zcolour.
    Go to values tab and select RED.Goto Extras-> Object Dependencies->Editor and then select Procedure.
    In front of 000010 Enter  $self.ZCol_surcharge='RED'.
    Similarly Select Blue  and enter $self.ZCol_surcharge='BLUE'
    3.Link both these characteristics to the Class(The class which you have attached the KMAT Material).
    4.Go to VK11 and the Enter VA00.Then give the values RED and BLUE and enter the values.
    5.Go to your order and Enter your material.
    I think this is what you wnated..
    **IF YOU FEEL THIS IS USEFUL THEN JUST REWARD POINTS**

  • What are the accepted values for each Maps parameter in the Apple URL Scheme?

    I'm interested in a complete enumerated list of the acceptable VALUES (as in KEY=VALUE) for the URL Scheme defined https://developer.apple.com/library/ios/featuredarticles/iPhoneURLScheme_Referen ce/MapLinks/MapLinks.html
    Obviously some of those parameters have an enumerated list, some are freeform. I'm just interested in the enumerated ones.

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • What are the default values for the NetStream.multicast***** properties

    I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
    I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
    I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
    Sorry for my poor english, Thanks.

    the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream.  in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit.  setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher.  if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4).  this is for safety.  we recommend you always leave push enabled.
    each peer (including the publisher) can change the multicast stream parameters dynamically.  changes are local to that peer.
    for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called.  example:
       var ns:NetStream = new NetStream(netConnection, groupSpecification);
       ns.multicastWindowDuration = 10; // change default for everybody
       ns.publish("mystream");
       ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
    each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick.  overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

  • IOS GoViral (Milkman class) - what are the returned properties?

    Hi guys
    I've set up the Facebbok login for my app using the GoViral class.
    Just wondering if there is a list somewhere of what you can access, and how, when listening to events?
    For example, I'm using the requestMyFacebookProfile() method to retrieve their unique user ID, but I have no idea how to access the ID via the returned data once it gets to...
    private function onFacebookEvent(e:
    GVFacebookEvent):void
    I can't see a list of the properties you can access in the docs.
    Cheers for taking a look.

    It returns a GVFacebookEvent object, what you need to do is to find that class on your docs (docs/as3doc/all-classes).
    If you need more information (like how is formed the JSON received) just read the Facebook Api documentation.

  • What are the valid values for CPU in conditional disable structure config?

    After diggin' around for some time (but to no avail)...
    Does somebody know the valid values for the CPU (symbol) in the conditional disable structure configuration or where I can find this information?
    Best regards,
    Horst

    Not sure but you can try this:
    http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/app_apptarget_cpu/
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • What are the possible values for a check box?

    I'm trying to fill a pdf with a asp.net web form. I'm getting the text boxes filled ok, but I'm having trouble setting the check boxes. I am testing to see if a web form check box is checked. if it is, I tried to set the pdf checkbox value to "on". But this doesn't seem to be right.
    My asp.net code is like:
    If CheckBox1.Checked Then
             af.SetField("pdfbox1", "On")
    End If
    Any suggestions?
    Thanks

    The value is the value entered into the "Export Value" option when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values for the same named check boxes. And if you know the 'widget' of the check box, you can use 'isBoxChecked' method to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript doucmentation.

Maybe you are looking for