What auth obj to use for allowing user to create and save workbook?

Hi all,
We are on BI 7.0, we have requirement which will allow users to develop and save workbooks (NOT BEX query) via BEx Analyzer. I have examined the auth obj S_RS_WKBK but it is obsolete auth obj and there is nothing similar obj in BI 7.0.
i then looked at the S_BDS_D, is this all i need in order to allow user to save workbook on to the backend system?
pls note, user can only save workbook NOT BEx query.
regards,
Joe

Hi,
Actually there is no direct away to do it
First use the Authorisation s_user_agr , here in the activity field assign01,02,03 and 06 , in the role name assign a specific role name.
In s_user_tcd in transaction asssign - RRMX.
Got to PFCG, maintain the role.
Hopr this will be expedite.
ThaX and Regards
Vaibhave Sharma

Similar Messages

  • My Time Capsule won't allow my computer to back up.  It says it is already in use but that is what it is being used for.

    My Time Capsule won't allow my computer to back up.  It says it is already in use but that is what it is being used for. It has been working fine for years.  All of a sudden I keep getting a message that TC (time capsule) cannot complete back up as it is already in use.  I am doing the backups automatically through Time Capsule.

    Restart the Time Capsule by disconnecting and reconnecting the power adapter. When it's back online, open the AirPort Utility application and check to see whether there's a firmware update for it.

  • What software do you use for rich media ad development?

    I am a flash designer that would like to start developing rich media ads. My my full-time job, I am designing and developing banner ads but they are just normal banners with clickTags and flashing buttons.
    I would like to make them more interesting and widget like too, passing data via the database or allowing users to play and interact some how.
    How do you think is the best way for me to learn more about rich media adds? Should I try a trial membership with a place like Eyeblaster? I have heard about their plug-in for Flash that allow you to develop rich media. But is that a good system? Do you know others? What is it like. And do you normally just get into rich media ad dev because of clients or is it mainly used by ad agencies? Also, for those who use it at work or on banners, did you recommend / purchase it or was it purchased by your company? Are you a designer or developer? Does it work with AS 2.0 or AS 3.0 or both?
    Thx for reading and any replies thanks so much!
    Ms.Lee

    Most web advertising is still done with AS 2 because usually an on release event handler is required for tracking the clicks.
    A lot of rich media ads are produced by agencies. Or if a website sells banner ads, the company usually purchases the software for the in-house designer/developer to use and charges clients more for rich media ads. Companies like Eyeblaster usually charge based on the file size of the rich media ad, so they usually cost more to serve than regular old banner ads (and can take a lot longer to create) which is why they are more expensive for the client. Some clients want more than will fit or look good in a banner in which case rich media can be a good solution.

  • What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
    One option is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/
    More options...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930

  • What data type is used for storing password,

    What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
    Thank you
    Hina

    Data type is VARCHAR2:
    SQL> desc dba_users;
    Name                                      Null?    Type
    USERNAME                                  NOT NULL VARCHAR2(30)
    USER_ID                                   NOT NULL NUMBER
    PASSWORD                                           VARCHAR2(30)
    ACCOUNT_STATUS                            NOT NULL VARCHAR2(32)
    LOCK_DATE                                          DATE
    EXPIRY_DATE                                        DATE
    DEFAULT_TABLESPACE                        NOT NULL VARCHAR2(30)
    TEMPORARY_TABLESPACE                      NOT NULL VARCHAR2(30)
    CREATED                                   NOT NULL DATE
    PROFILE                                   NOT NULL VARCHAR2(30)
    INITIAL_RSRC_CONSUMER_GROUP                        VARCHAR2(30)
    EXTERNAL_NAME                                      VARCHAR2(4000)
    PASSWORD_VERSIONS                                  VARCHAR2(8)
    EDITIONS_ENABLED                                   VARCHAR2(1)
    AUTHENTICATION_TYPE                                VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313.

  • What method should be used for resizing the particular JTable Column width

    I have a four table. Only one table which are on top have a table header. I want that when user resize the topmost table with a mouse other table colume also be resized automatically. So I want to know that what method should be used for resizing the particular JTable Column width.
    Thanks
    Lalit

    maybe you can implement a interface ComponentListener as well as ComponentAdapter with your topmost Table.
    for example:
    toptable.addComponentListener(
    new ComponentAdapter(){
    public void componentResized(ComponentEvent e){
    table1.setSize(....);
    table2.setSize(....);
    /*Optionally, you must also call function revalidate
    anywhere;*/
    );

  • What r the tables used for this report.

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.

    Hi Ashok,
    this is easy to do.
    Open Two SAP Screen with same user ID.
    Run SQL trace using ST05 transaction.Open ST05 transaction in One and make
    Trace on ,Run the report in another screen.
    Once report run is over.End the trace process and click on display trace in same ST05 transaction.There is a click button on ST05 Transaction screen to start trace
    process,End trace process and Display track process.
    The SQL trace will  give you all the table details which is used in that particular report.
    You have not mentioned about the report name so I have suggested this way.
    regards,nishant
    Please reward if this helps

  • What are cookie domains used for?

    there is a choice, can someone give me some suggestion?
    What are cookie domains used for?
    A/ to be easily recognizable by digital certificates that are also based on domains
    B/ to instruct the browser that the cookie should be send only to the domain it came from
    C/ to provide convenient way for the user to group cookies by their domains
    D/ All of Above
    E/ None of Above

    Not only does that not appear to be a Java question,
    but the OP didn't even take a guess at the answer and
    explain why he thought that that answer was correct.thanks! i support with your viewpoint, solve a problem will be the most important mission, but not consured! i am cognizant of this is a mistake to ask other questions in java forum ,but this question didn't far away j2ee project, though this is a choice, but only get a answer is not my original intention! i hope i can call on anyone join in this discussion!
    thanks...

  • What t_code should be used for migration?

    Hello there,
    our user wants to  migrate  "output vat" account after being audited.
    actually , they start using SAP from 1st. January.2009 but now needs to migrate for reconciliation purpose.
    Journal should be 40) output VAT   /      50) Beginning Balance-BS.
    Since this output VAT does not need any tax code and base amount, i think normal FI transaction like F-02 is not an answer.
    Furthermore, LSMW is not strongly recommended at this time, considering line item to be created.
    Could you let me know what t_code should be used for this case?
    BR.
    J.
    Edited by: Jimmy Choi on Jun 30, 2009 5:41 PM

    Hi
    Note down the G/L accounts you are posting.
    Option 1 :In OBD4 see the account group. change the tax category mandatory to optional field for running the lsmw. afte completion, set the status as earlier.
    Option 2: goto fs00-> see the field status group.-> double click on the FSG-> see the taxes -> make the fields optional.
    with regards
    siva
    Edited by: Siva Rama Krishna Yanamandra on Jul 2, 2009 1:12 AM

  • What are the materials used for the earbuds/earphones??

    What are the materials used for the earbuds/earphones?? Like whats the plastic used and what are the speaker materials and the volume button???

    Hello Veronica176
    The materials in Apple headphones include Neodymium magnets, oxygen-free electrolysis copper wire and a Nickel plated plug
    Apple uses Neodymium magnets in their headphones as it is much more magnetic compared to that of a ferrite magnet. This also further enhances the accoustics of sound and preventing any loss of sound. Because of this, you can get the same sound out of Apple headphones as the good ol' circum-aural headphones (image attached).
    Oxygen free copper wire is created through electrolysis which is furthermore considered an above average material for headphones, thus ensuring better sound quality. Oxygen free copper wire ensures a faster transfer time (as copper is one of the best conductors) and because of this, allows a faster transfer time, minimising loss. This means the sound quality of the music/sound playing may actually depend more on the quality of the MP3 file than the headphones.
    The nickel plated plug used by Apple is a standard connection and joins to a female connection into the iPod (for example) which is also nickel plated. Where gold plated plugs are renowned to transfer more data and superior sound quality when connected to any device. Connecting the same metals during transfer (nickel plated plugs and nickel female connections) ensures optimum sound as the signal will not be jumping different kinds of metal. The lack of gold plating also helps to reduce the cost in manufacturing and to the customer.
    If you have any more queries, please feel free to ask further questions, it is what we are here for

  • Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

    I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
    It seems to be considering these items as removable media?
    DPM 2012, SP1, version 4.1.3313.0
    Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
    Affected area: skutter.pmuk.net
    Occurred since: 11/01/2013 09:04:43
    Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
     DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
    , atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
    , firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
    ,firebird.pmuk.net_HADPCLQuality  , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office  ,firebird.pmuk.net_OMPM
    , firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER  ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8  ,firebird.pmuk.net_Spares 
    ,firebird.pmuk.net_test   ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$  ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON  ,legion.pmuk.net_SYSVOL
    , nemesis.pmuk.net_KEvin  ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$  ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
    ,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
    ,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control  ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital  ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
    ,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs  ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
    ,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
    , valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
    xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
    folder, non-NTFS volumes,  DFS links,  CDs,  Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
    Any Ideas? backups are OK, recovery points/sync's etc.
    Mark.

    I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
    In DPM I disabled EUR
    In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
    Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
    Delete all of the mappings within the container
    In DPM enable EUR
    In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
    Related article on ADSI Edit and DPM -
    http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
    I hope this helps
    JD Young

  • What keys can I use to change user?

    What keys can I use to change user?

    I am not aware of a keyoard shortcut to change between users. You can click on the current users name in the upper right of the menu bar and it shild drop dowm with the user list and you can click on that user for a quick change.

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • External hard drive used for Time machine is full and having a hard time backing up. what should I do?

    External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?

    For All things Time Machine see Pondini's Excellent Infirmation here...
    http://pondini.org/OSX/Home.html
    Start with FAQs and Troubleshooting.

Maybe you are looking for