What causes radio button to have square around it?

Hi there.
CS3.
I use the CSS layout of TwoColFixLtHdr from DW for a site I'm
working on.
What I don't understand, is that this template's CSS causes
the radio
buttons to be in a square, something I don't like and would
like to have it
removed as long as I knew how to. I could not find anything
specific on the
CSS that directly indicated that it is something.
Blank pages have the radio buttons correct.
Regards,
Deon

Hello,
Did you add any styles to any form elements, such as borders
or background
color that could be styling the radio button as well?
Anything applied to another input?
The answer is in the code.
Can you post a link?
Take care,
Tim
"Deon H" <[email protected]> wrote in
message
news:[email protected]..
> Hi there.
>
> CS3.
>
> I use the CSS layout of TwoColFixLtHdr from DW for a
site I'm working on.
>
> What I don't understand, is that this template's CSS
causes the radio
> buttons to be in a square, something I don't like and
would like to have
> it
> removed as long as I knew how to. I could not find
anything specific on
> the
> CSS that directly indicated that it is something.
>
> Blank pages have the radio buttons correct.
>
> Regards,
> Deon

Similar Messages

Buttons (boxes) have squared corners in Design Mode, and after quick preview and export to BC test pages, they are rounded? Need quick fix.

Please if anyone can give us some help fixing this bug, tried going into every single state of them individually. We have no other portions of the site with round corners so these are sticking out like sore thumbs. Perhaps it could be other live areas on the site in Tools such as TOOL TIPS which we have changed a bit from normal usage to suit our needs. Please let us know what other bit of information you may need form us, We may have trouble loading full pages, but can load elements.

A link or screenshots would help.
Make sure you have your border radius set to '0' for those elements.

After each line of text and radio buttons are these squares with numbers inside them. How do I turn them off? Only on firefox does this display happen.

Numbers seem to be in order. they look like modeling codes used when setting up a website.
I did not have this problem until I upgraded to the new firefox update.

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page to see if that helps.
*http://kb.mozillazine.org/about:config
Which numbers are in the boxes?
If you see a box with hex code in it then that means that Firefox can't map a character to a specific font and you have to install a font that covers the affected characters.
* http://en.wikipedia.org/wiki/Supplementary_Multilingual_Plane

Tab order of radio buttons skipping back

I'm currently using Adobe Acrobat Pro XI (trial for now) to mess around with forms. I am having a problem right now with the tab order. I believe the culprits are a few pairs of radio buttons I have set up sequentially. Each pair is in it's own group with one being "Y" and the other "N". After setting the tab order such that I can easily navigate the form in the specified order, I have found that when I reach the bottom of the first page (the same page in which my radio buttons are found), with the last object that I "tab" through being a text field, I am redirected back up to the radio buttons instead of proceeding to the next tabulated object located on the next page. When I first tab through the radio buttons, the default value I land on is the "Y" value, and when I am unexpectedly redirected there again, the default value I land on is the "N" value of the first radio button. If I tab through everything to the bottom of the page, I am once again redirected back up to the radio buttons. If I mouse click on the next field on page 2 and tab through, everything works fine including being able to move onto page 3 in the expected order. So what gives? Why would I keep getting redirected back up to the radio buttons at the end of tabulating through page 1? I have the radio button groups in the correct tab order, but I'm not sure how to fix this issue with the radio buttons. Any help would be greatly appreciated. I have tried looking online in multiple places for a solution, but haven't quite found one to this or anyone else who might have this same problem. If any further clarification is needed, please let me know. Thanks!

Make sure the thenames for all items including Checkboxes and radio buttons are unique on each page if go to adjust ment for tab order you can drag them to the correct order.
even though you may have placed them at a specific spot if you added then at a later place in the design (say as an after thought, hey I need to add this), their tab order is based on when they are added not the position the actual element is placed.
In other words if the check boxes /radio buttons are the fourth item down position wise in document by they were the twentith item added they will skipped over thad the other 19 in turn will be tabbed to the when 20th tab is hit they will bounce back up to the check boxes/ Radio buttons.
Be sure they are titled button1 button1a, button 2 button 2a and so on or lese the will be marked all at the same time and may bounce back to the first position they were in.

Acrobat 9.1 Mac How do you change from Radio buttons to Check boxes?

I have a DMV Form I Downloaded and had to convert to PS then back to PDF (written originally on PC Acrobat was in XML format).
So on new form, I am able to add fields. I used the the Forms manager to automatically create the fields. Fields that were made Radio Buttons should have been Check boxes. How do change the Radio buttons to check boxes. There are a lot of them and I don't wish to have to re-key them in.
Suggestions?

Well when I click on the box it shows a Check mark in the box. That exactly what I need because in the instructions it requires a Check mark in each of the check boxes. Normally the Med form is sent as a paper copy from DMV every two years.
Also another Tip. A PDF that has XML Content. (PC Acrobat Version).
If you want a usable PDF on Mac and get rid of the XML do the following:
Open the XML Based PDF on Mac Acrobat 9.X .
Now choose export and save as Postscript File (.ps).
Now locate and drop on Distiller 9.X.
When PDF created will be a Pristine exact replica of the XML file except Mac Acrobat can edit and create forms with it.

Radio Buttons, Global Binding, and Change Event

I have a pair of radio button groups with the same name that I have set to Global binding. The radio buttons in these radio button groups have script in the change event. The problem is, when I click on a button in one group, it doesn't fire the change event in the other one, even though the corresponding button changes. I can work around this, but I'm curious why this doesn't work.

ocen12 is correct - the change event will only fire when a user clicks on the radiobutton. It will not fire when a script changes the value. I tried it here and found that the radio buttons on both groups act like they are under the same exclusion group. Do you see the same thing? If I select a value in the second exclusion group any value I had in the 1st one is gone.
Paul

How to check Radio buttons with Differfent button values

Good Day,
I am currently trying to write a script that would hide 5 of 6 radio buttons
I have a radio button called "3. Transfer"
with values of :
     Yes;
     Supp;
     Reg; and
     do_not_transfer
as well I have a drop down called "REL.ITEM"
with values of
          3(A);
          3(B);
          4(A);
          4(B); and
          4(C)
I know how to get the value of the box and manipulate other fields
like
//START
var transfer = getField("3. Transfer").value
var relitem = getField("REL.ITEM").value
if (transfer = "Yes" || transfer = "Supp") && (relitem == "4(C)" || relitem == "4(B)"))
     getField("a. recommend").checkThisBox(0,true);
     getField("a. recommend").display = display.visible
    getField("a. I do not recommend").checkThisBox(0,false);
    getField("a. I do not recommend").display = display.hidden
else if (transfer = "do_not_transfer")
     getField("a. recommend").checkThisBox(0,false);
     getField("a. recommend").display = display.hidden
     getField("a. I do not recommend").checkThisBox(0,ftrue);
     getField("a. I do not recommend").display = display.visible
//END
I would like to make it so that if REL.ITEM != 4(A); 4(B); 4(C) that the radio box's with values of "Yes", "Supp" and "Reg" are hidden while "do_not_transfer" is still displayed and checked.
I've been going through forums, google and acrobat documentation and I can't seem to find what I'm looking for.
Thanks for your help in advance.

if (transfer = "Yes" || transfer = "Supp") && (relitem == "4(C)" || relitem == "4(B)"))
This should be:
if ((transfer == "Yes" || transfer == "Supp") && (relitem == "4(C)" || relitem == "4(B)"))
Similarly,
else if (transfer = "do_not_transfer")
should be:
else if (transfer == "do_not_transfer")
In order to work with an individual widgets of a form field, obtain an object that represents the widget using the getField method as specifically demonstrated in example #2 in the documentation: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.476.html

Problem editing labels of radio button symbols in Fireworks CS6

Hi,
I'm new to Fireworks, and I am struggling with symbols. I have encountered several problems creating reusable symbols and especially editing the labels.
Problem 1
I can't edit the label of a symbol that I create using a default Common Library symbol as a starting point. Here's how to reproduce:
- Open a default symbol, say RadioButton(win) for editing
- Do changes (font for example)
- Save as a new symbol in the Common Library folder
- Use the new symbol in a new document
- Editing the label in symbol instance properties does not work
Continuing with a rather irrelevant use case just trying to understand what is going on:
- Add a default symbol RadioButton(win) from the Common Library to the same document
- Now try editing the label of the new symbol (added to the document above)
- The label (and other properties) of the default symbol are edited instead
Problem 2
Why can I not enter a number as a label of the RadioButton(win) symbol, found in the Common Library? The workaround is simple though, I can just enter a number followed by a space.
Problem 3
How to create a set of a heading and three radio buttons as a symbol? If I simply convert three RadioButton(win) symbols and a text element to a new symbol, I lose the possibility to edit the labels of the radion buttons. The properties show that the radio buttons have labels from the time before converting to a new symbol, but in the new symbol the radio button elements have labels that say "label", and I cannot edit them.
What is the best way to create radio buttons, check boxes, combo boxes and other symbols with custom look and feel, while retaining all the functionality of the symbols?
Thank you,
Teemu
Fireworks CS6 12.0.1.273

misterMistake wrote:
> Fireworks v. 9.0.0.1188
>
> I have created a 4 state button & saved it to my
button library. Now I need
> to modify the graphic but cannot select it. When I first
click on the "down"
> state, the graphic is selected along with the "active
area." If I grab the
> button I can move it but then it immediately snaps back
to it's original
> position. I then cannot select the button again until I
click to another state
> and then back again to "down." This problem is not just
with the "down" state
> but all states. The documentation makes clear that I can
just double click on
> the button, either on the workspace or in the library,
make my edits and then
> click "done" in the button editor window. Clearly I've
either done something
> incorrect to lock the graphic or my understanding of the
process is incorrect.
> Any help appreciated.
Can you upload a copy of the PNG file to your website for us
to have a
look at?
Linda Rathgeber
http://www.adobe.com/communities/experts/members/8.html

Validate radio button

hi everyone.
i would like to know how to validate radio button that have values of yes(y) and no(n).
I am using javabean to do the validation.
Thank you in advance.

Well what do you need to validate about it?
That one of the options (Y/N) got selected?
That the value is "Y" or "N"?
The steps for validating it would be
1 - retrieve the value submitted by the radio button - String val = request.getParameter("nameOfRadioButtonComponent")
2 - do some if statements
if (val == null || val.trim().equals("")){
// user did not submit a value
}

How to check radio button as default on the basis of database value?

Hi Friends,
I have one jsp, in which I am having a field of radio button, which have two boolean values of 0 & 1. I want to check the radio button as default on the basis of database value, kindly help me out.
Thanks a lot in advance. Please help me out.

probably, when using struts you should do all your calculations in action class it self
Eg. in jsp
<html:radio name="myForm" property="myProperty" value="0">0</html:radio>
<html:radio name="myForm" property="myProperty" value="1">1</html:radio>
in Action class
if (databaseValue == 0)myForm.setMyProperty(0);
else if (databaseValue == 1)myForm.setMyProperty(1);
rest will follow
whatever be the value it will come selected

Radio Button grouping Issue

I have specified an Itemrenderer radiobutton inside a Datagrid and have also set selected="false" for the radio button. Have also set the groupName="rbGroup". But when the data gets displayed on teh screen few of the radioButtons gets selected randomly and keeps changing each time.
Please let me know in case if you have a solution.
Code::
<mx:VBox
visible="true" width="80%" horizontalAlign="center" height="70%" paddingTop="30">
<mx:DataGrid id="searchResult" dataProvider="{srv.findICDCodes.lastResult}" width="100%" height="90%" visible="true" styleName="DataGrid">
<mx:columns>
<mx:DataGridColumn width="15">
<mx:itemRenderer>
<mx:Component>
<mx:RadioButton x="291" y="8" groupName="rbGroup" label="rbGroup" selected="false"/>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Source Code" dataField="sourceCode"/>
<mx:DataGridColumn headerText="Description" dataField="sourceDescpr"/>
</mx:columns>
</mx:DataGrid>
</mx:VBox>

I think you should remove the groupName="rbGroup" I don't think it's neccesary here and it could be the source of your problem.

Sub screen: Handling the Radio button selection?

Hi,
Scenario:
I have a Main screen and a sub screen. From the main screen I am calling the sub screen. On the Sub screen, I have 2 radio button. On the selection of the Radio buttons, I am activating/deactivating few of the screen elements on the sub screen.
I have grouped the radio button and also tried assigning Function code to it, but in vain..:(
Issue
I am not able to handle the event triggered by the selection of the radio buttons?
Kindly suggest.
Regards
s@k

Hi,
Are you still have any Issue, Let us know
In the Main Screen Element List there is a field OK_CODE pass an entry into it
in the TOP Include
DATA : OK_CODE type SY-UCOMM. " This captures the OK_CODE from the Screen.
Since SUb Screen cant have their Own OK_CODE this can be handled in the Main Screen only
Try in PAI of Sub Screen using OK_CODE if it is not working then Implement the same in PAI of Main Screen
The system will generate UCOMM for Radio Button since they are in One Group only. Each Radio button cannt have a separate UCOMM assigned. In Screen Painter (if It is Module Pool) assign a FCode for the Radio Button.
Even if try changing the FCODe Value they still will have the New Changed Value but cannot be changed.
This automatically triggers PAI . only way to capture it is check
case ok_code. " Optionally you can omit this
when ok_code = 'RAD'. " This is common for all the Radio BUttons but cant be different
if r1 = 'X'.
elseif r2 'X' " Etc.
endif.
endcase.
Ram
Edited by: Ramchander Krishnamraju on Feb 26, 2010 10:37 AM

Creating Radio Button on Module pool Screen

Hi Gurus,
I am currently working on a program which involves module pool selection screen. In my selection screen i have placed 2 radio buttons, i have kept these radio buttons in same group. But when i am running the program both the radio buttons appear as checked. Could any one help me on that.......I need only one radio button to be checked at a time ..
Thanks in advance....
Regards,
Shiv.

hI,
IT IS HIGHLY IMPOSSIBLE THAT BOTH OF THE RADIOBUTTONS ARE CHECKED.
and there is no chance that both the radiobuttons are in two different groups since in a single group minimum 2 radiobuttons should be there.
check you coding.or if required redraw the radiobuttons. and select the radiobuttons properly while grouping them together..after grouping you will see dotted lines aroung them.
just try that. reward if helpful.
regards,
pankaj singh

How to hide parameters AUTOMATICLY based on radio buttons being pressed

I have multiple radio buttons and with each radio button I have parameters that appear on screen for user to enter data.   Is there a way to make the selection blocks appear and disappear automatily based on the user pressing the radio button?
My current coed works only if I press the enter key but not automatily when the radio button is pressed.

hi, have a look this example, it works as u want.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS: r_ps TYPE c RADIOBUTTON GROUP rd DEFAULT 'X' USER-COMMAND abcd, "radio button server
               r_as TYPE c RADIOBUTTON GROUP rd . "radio button for application server
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_pfile TYPE rlgrap-filename MODIF ID ccc, "presentation server input file
                p_afile TYPE rlgrap-filename MODIF ID aaa. "application server input file
SELECTION-SCREEN END OF BLOCK blk1.
AT SELECTION-SCREEN OUTPUT.
IF r_ps = 'X' .
    LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CCC'.
          screen-input = 1.
          screen-invisible = 0.
          MODIFY SCREEN.
      WHEN 'AAA'.
          screen-input = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
ELSE.
    IF r_as = 'X'.
      LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CCC'.
          screen-input = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
      WHEN 'AAA'.
          screen-input = 1.
          screen-invisible = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
    ENDIF.
ENDIF.
START-OF-SELECTION.
Regards

Interactive PDFs: checkmark vs radio button

I am created an Interactive PDF fillable form for a client.
They want to use checkmarks for different options that user can choose - however they want the user to only be able to chose ONE of the options. Radio buttons work in this way (if one is selected, the others get deselected), but I cant seem to get checkboxes to work this way. The client is adamant that they do NOT want buttons, they want the appearance of the checkmarks.
My question is: Is there a way to make a checkbox function like a radio button?

Is there a way to make a checkbox function like a radio button?
Actually you want a radio button, but have it appear as a checkbox. You can do this in Acrobat by changing the property of the button, selecting a [check] for the button style. You can kinda of accomplish this in Indesign, by creating a radio button, and change the [click on] appearance to a check mark graphic or glyph. The problem with this method is that regardless of the various appearance states, the button by default remains as a true radio. When viewed in Acrobat/Reader, you can select the button and have a check mark appear and it functions as a radio button, but the initial appearance is an unchecked circle button style.

What causes radio button to have square around it?

Similar Messages

Maybe you are looking for