What does it mean missing camera with an exclamation sy in fcx

I get a clip in browser that says "missing camera" what is that
Its color red
When I find it in the finder and drag to my desktop i have good video
I dont know how to get it back
There are three clips
It doesnt say missing clip...says missing Camera Thanks for any help

I know its on another drive..I went through Sonys content browser..sent the file (BPAV) to 2 drives..camera is a Sony EX-1R
As far as optimized on import..It may have imported by default...that way...Is there a setting for that which I can look for Thanks

Similar Messages

What does scale mean in PARALLEL_PROJECTION with SCALE_EXPLICIT policy?

Does anyone know how the parallel projection view is scaled?
I'm using:
view.setScreenScalePolicy(View.SCALE_EXPLICIT); / /specifies that the scale is taken directly from the user-provided screenScale attribute
First of all, I tried two ways of changing the scale:
1. Scaling in the view
view.setScreenScale(scale); // Sets the screen scale value for this view. This is used when the screen scale policy is SCALE_EXPLICIT. The default value is 1.0 (i.e., unscaled).
2. Scaling in the transform matrix
Transform3d t=new Transform3d();
t.lookAt(new Point3d(eye),new Point3d(center),new Vector3d(up));
t.setScale(scale);
objTrans.setTransform(t); // Sets the scale component of the current transform; any existing scale is first factored out of the existing transform before the new scale is applied.
Note: t.getScale() returns 1.0 by default, until a scale is applied.
Both seem to have the same result, and I'm not sure which is better.
Now what's weird is to figure out what the "default" scale is?
I made a cube model, centered on the origin, resized it until it fix well on the screen without any scale applied. I found a 0.2 length cube accomplished this. Then I measured the pixel size of the window and cube and I found this relation:
Cube_size (in pixels) = window width (in pixels) *0.55; // Measured factor varied only slightly from 0.5414 to 0.5544 depending on window size and aspect ratio.
I found the window height had no effect on the pixel size of the cube.
My 0.2 length cube filled 55% of the width, so a 0.36 length cube fills the full window width. I verified this.
This means if I want to assign the scale by the number of physical units wide I want visible, I need to include a 0.36 correction factor to the scale:
view.setScreenScale(0.36/width);
This works - my 0.2 length cube fills the full width when width=0.2. I verified this works for other sized models too.
Although this works, I really don't like mysteries, and I'm becoming convinced other problems (properly setting the FrontClipDistance and BackClipDistance for a given model and view) are related.
I really HATE that these transforms don't seem to be written out anywhere, in any documentation I can find.
Has anyone else worked with the SCALE_EXPLICIT policy in PARALLEL_PROJECTION view?
Any help is appreciated!
Tom Ruen

I'm trying to scale a 3d representation of the human body so that it always remains the same distance from a virtual camera regardless of resolution. I need it to be the same virtual distance from the virtual camera as a subject would be from a real 35mm camera.
I tried the following code:
GraphicsConfiguration config = SimpleUniverse.getPreferredConfiguration();
          Canvas3D canvas = new Canvas3D(config);
          SimpleUniverse universe = new SimpleUniverse(canvas);
          canvas.getView().setScreenScalePolicy(View.SCALE_SCREEN_SIZE);
          System.out.println(canvas.getScreen3D().getPhysicalScreenWidth());
          System.out.println(canvas.getScreen3D().getPhysicalScreenHeight());
          canvas.getScreen3D().setPhysicalScreenWidth(0.005);
          canvas.getScreen3D().setPhysicalScreenHeight(0.005*0.8);And it does seem to "zoom out" ever so slightly (using 0.005). However, it appears that the boundingsphere is such that the objects begin to be not drawn as one "shrinks the scene", thus effectively zooming out. Scaling the scene up is fine, but i need to scale it down - ie shrink it.
The reason I am attempting to use this method rather than applying a transform on the viewingPlatform is because I purposefully did not want to have to adjust the bounding sphere.
Can you give me any help on why scaling up works really well with most values >actual screen size, but scaling down is very iffy, and only shrinks the scene with values MUCH less than the actual screen value. Even then, i start to get holes where polygons arent drawn anymore.
Thanks

TS2776 what does this mean it came up in itunes (-42404)

well i tried to download a game in the itunes store and then this came up a required itunes component is not installed (-42404) and i dont know what this means

Although you're getting a different error message, I'd try the following document with that one:
iTunes: Missing folder or incorrect permissions may prevent authorization

CX_ST_GROUP_MISSING_CASE:XSLT Exception offset 409 - what does it mean ?

Hello,
a webservice consumer-proxy does'nt work fine and I have no idea, what's wrong.
In SOAMANAGER I checked the tracefiles and a lot of errors occurs:
"CX_ST_GROUP_MISSING_CASE:XSLT Exception bei Offset 409, XPath n0...Element id fehlt (fault location is 1 )"
What does it mean ?
Problems with element 'id' , but what exactly ?
The response contained element 'id' but with value zero.
<soapenv:Body>
<createDeliveryNoteResponse xmlns="http://ws.common">
<createDeliveryNoteReturn>
<id>0</id>
</createDeliveryNoteReturn>
</createDeliveryNoteResponse>
</soapenv:Body>
</soapenv:Envelope>
thanks in advance.
best regards
Holger
- <
<

Hello,
problem is solved.
What's the reason for this ?
Exception CX_ST_GROUP_MISSING_CASE is not correct, the transformation works fine, with STRANS you can check this.
But in SE80 you can check the client-proxy with the definition of wsdl and any objects are missing or must change. Why I have no idea, it seems like a bug after implementation support packages.
So after generating missing objects and activating the webservice works fine, no exception occurs.
best regards
Holger

Picture came on my TV showing a plug below an itunes symbol What does it mean when my Apple TV displays the iTunes logo with a USB cable icon?

http://firecore.com/sites/default/files/imagecache/large-500px/wysiwyg_imageuplo ad/144498/IMG11.56.29_09-04-2012.jpg
What does it mean when my Apple TV displays the iTunes logo with a USB cable icon?

You need to connect to iTunes via micro usb and restore
http://support.apple.com/kb/HT4367

What does it mean when I see the file with the question mark on my screen?

What does it mean when I see a file with a question mark on the screen?

Means no bootable system can be found or required system files are missing or damaged. Reinstall OS X.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have an iphone 5, iOS 7.0.2. Going through photos on facebook app., above on the screen, came up "saving screenshot"....but there was nothing in camera roll. What does it mean this, what's are this screenshots?

I have an iphone 5, iOS 7.0.2. Going through photos on facebook app., above on the screen, came up "saving screenshot"....but there was nothing in camera roll. What does it mean this, what's are this screenshots?

I agree- I apologize if I sounded skeptical and attacking. In no way did I mean it to sound that way.
I completely agree on the software-hardware combo issue- this is why apple killed off 1G and 2G devices- because newer software revisions would never ever run well if at all on such ancient devices. can you imagine running iOS 6 on an iPhone/iPod touch 1G? That would be terrible. Let alone iOS 3 runs terrible on them and now are generally rendered useless due to newer App Store requirements (most require 4.3+ now to allow apple to kill off the older devices). forcing newer software on older hardware (apple, dell, HP,... Anything electronic this definitely applies to) will almost always yield less-than-par results. The other part is apple forcing you to upgrade by means of intentially making things obsolete. all companies do that.
All of this factual info aside, the issue at hand with the 5 is not a software-hardware combo problem- those are most widely seen with the major revisions. then again, this isn't the first time apple has gotten caught up in battery drain snafus (even iOS 5 was plagued with this as well- and now there are some people desperate to roll back but can't). it basically waters it down to the point where keeping the stock software will always yield the best results even though newer versions provide better features- it all depends on whether or not the person deems the added features are worth a performance hit.
PS. I'm still at 100%- and I've been using it periodically throughout the day. your combo worked for you, but didn't for me. And may or may not work for others- As the tech world would say, mileage may vary.
PSS. What model/carrier do you have? Just wondering.

In iTunes media browser - under movies - telling me "iMovie camera archives.localized" what does this mean - i can't burn a DVD

Having problems when trying to Burn a DVD -have done this many times in the past.
After making a slide show from Events - export it with a copy going to itunes -
then open miDVD select the slideshow from the righthand list of slideshows/movies
and drag and drop it onto the lefthand box (miDVD) and then press Burn - will not !
In miDVD media browser - itunes - under movies - getting the message "imovie camera archives.localized"
and imovie projects.localized what does this mean - why have they been localised - and how can I put this right?
so that I can BURN a DVD again?

Having problems when trying to Burn a DVD -have done this many times in the past.
After making a slide show from Events - export it with a copy going to itunes -
then open miDVD select the slideshow from the righthand list of slideshows/movies
and drag and drop it onto the lefthand box (miDVD) and then press Burn - will not !
In miDVD media browser - itunes - under movies - getting the message "imovie camera archives.localized"
and imovie projects.localized what does this mean - why have they been localised - and how can I put this right?
so that I can BURN a DVD again?

What does it means when you turn on the macbook and a file with a "?" mark flashes?

What does it means when you turn on the macbook and a file with a "?" mark flashes?

It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

In the library there is a cirlce with a exclamination point next to a random number of songs. What does it mean and how do I get rid of it?

In the I tunes library next to a random number of songs there is a circle with an exclamation point. The songs won't play and how do I get rid of this and what does it mean?

Hi rjs317,
Welcome to Apple Support Communities.
It sounds like there are some songs that iTunes isn't able to locate, the songs may have been moved to another folder or disk. The article linked below provides more information about the exclamation point symbol and provides suggestions that will resolve most missing media issues.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
I hope this helps.
-Jason

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

I am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?

i am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?

thank you thank you for taking an interest. this is so frustrating.
i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
will not boot from leopard disk.
tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
these are fresh drives with only what came on instll disk loaded.
thanks again for taking an interest.
i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
This is making me crazy. I anxiously await your words of wisdom.

HT1689 WHAT DOES IT MEAN WHEN I RECEIVED A PHONE CALL AND 3 NAMES CAME UP AS THE CALLER

what does it mean when i received a call and 3 names came up as the caller

Could mean that you have three different contact entries with the same phone number.

HT4859 what does it mean if my new iphone says that iCloud backup are compatible with the version of iOS (6.0.2) on this iblePhone

I am trying to back up my fiels from old iPhone 3S to the new one I have just bought using iCloud and when I am doing it, my new iphone 5 is writing thet iCloud back-up are compatible with the version of iOS (6.0.2) on this iPhone. What does it mean?

I just worked on this same issue for someone else at work (iPhone 4 or 4S up to date). The iPhone 5 needs to be up to date to the newest version of IOS
Here is what I did:
1. Got into the iPhone 5 without using an account
2. After getting in, it shows that there is an update
3. Completed the update
4. After the phone rebooted, went in and completed a reset of the phone to factory
5. When it came back up followed prompts and was able to restore from iCloud backup.
Hope this helps

Hi, I was given an iMac Flat Screen over the weekend, it turned on ok, this morning when i turned it on there is a circle with a flashing ?, what does this mean, help!

Hi, I was given an iMac Flat Screen over the weekend, it turned on ok, this morning when i turned it on there is a circle with a flashing ?, what does this mean, help!

It means that it cannot locate the operating system.
You need to reinstall from the disks that came with the iMac and which the vendor is required to give you.

What does it mean missing camera with an exclamation sy in fcx

Similar Messages

Maybe you are looking for