What exactly is the yellow representative of on the 'capacity' bar when i sync/update my iphone on my laptop with my itunes.
I ask because my iphone is full and yet I have such a small amount of playlists in my music and so very few photos compared to my friends, and even when I delete photos it still tells me I'm over capacity and the yellow section of the bar which is decribed as 'other' is taking up half of my memory and I dont know where to go to find out what the 'other' stuff is!!
look to the right at more like this -----> look for the thread with the green check mark.
Similar Messages
-
when trying to update my iphone 4S software to OS6 on itunes on my pc, i get an error request saying that i do not have permission to access the required resource?
Are you using iTunes version 10.7?
-
Please help me answer this QUestion-
My Itunes "Capacity" bar says my ipod is full of "other" witch is the yellow bar, When i sync it says i only have 7GBs left, WHAT IS THIS "OTHER" and how do i get rid of it??Please help me answer this QUestion-
My Itunes "Capacity" bar says my ipod is full of "other" witch is the yellow bar, When i sync it says i only have 7GBs left, WHAT IS THIS "OTHER" and how do i get rid of it?? -
I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone. On the computer, a circle is next to the song and the title faded out. What the heck is that all about and how do I get my songs back onto my phone playlist? Never happened before. My software is up to date?
http://support.apple.com/kb/HT2519
-
When I was updating my iphone to the new iOS at the final part (when the syncronization is beind done in iTunes), it never finshed. It's been more than 1 hour and it says "syncronizing step 2 of 4". What to do in this case?
Hi lucaloo,
Welcome to the Support Communities!
The article below may be able to help you with this.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Judy -
When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?
If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections. -
Hi, I was given an iMac Flat Screen over the weekend, it turned on ok, this morning when i turned it on there is a circle with a flashing ?, what does this mean, help!
It means that it cannot locate the operating system.
You need to reinstall from the disks that came with the iMac and which the vendor is required to give you. -
I have downloaded the latest version of itunes to my computer and when I sync my new iphone, it says it is syncing but doe not pull the music in my library. Can anyone assist me in figuring out how to sync my iphone? The computer that has my current music library is old so I want to get it synced before it dies...
Download what applications?
Apps in iTunes do not run on computers.
What is the exact error and where specifically is it occurring? -
I want to sync my iPod Touch to my new computer. I've added a lot of music to my computer iTunes and don't know if I will lose the music on my computer or my iPod when I sync. What do I do to keep all from both devices?
You can only sync with one computer To switch computers and not lose anything:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
How to transfer movie from the apps in iphone to my laptop with window 7 os
how to transfer movie from the apps in iphone to my laptop with window 7 os ?? Pls helpppp =)
Movie from what app? If this is a movie that you took, with the video camera of the phone, then see this. iOS: Import personal photos and videos from iOS devices to your computer
-
When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630).can anyone please with a knowledge tell me what I should do please. Thank you
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
Hi
When I sync my new iphone 4s to my mac book everything moves across apart from my contacts, I have cleared the phone and started again but it will not work.Hello Grant - -Thanks - -
I notice you are west of Boston - -we in Medford and son goes to Tufts in town
(small world)
Not really certain what you are telling us - - I am not good at computers
A couple of other things that may be tips - -
1 - on wednesday of this week
our son noticed the fan was going on almost continuosly,
After that trouble started - -
2. - When we put the new HD in - -same things happened,
which is ? mark in folder (start-up items)
3. - His computer will not see my wireless even if I put it next to my I-mac
It sees several networks but not mine - -and if we type in my netwokr
info - -it will not take. He wanted to try a network start-up .
I forget how that is done.
4, - The bottom of the computer is getting hot - -much hotter than i think it should.
any ideas why his computer won't see my router?
I think he may just have to take it to Apple Store on Newbury Street.
Would they be able to get his info off the old HD assuming it is still good and
transfer to the new HD fairly easy.
LAstly - - I am pretty certain I have the str-up disks for my I-mac which is running
10.5.8.
Would I be able to do anything with my computer and hook into his computer
into mine like an external device or something like that
I really appreciate your thoughts and efforts on this and must admit I have no
external enclosrure? but I have an external HD on my I-mac
As you can tell - -I am not to good at this
Thanks from Meffa (lol0 Jim the father -
after an update my iPhone 4 has frozen with just the apple screen visible. I have tried connecting to iTunes but now iTunes isn't locating my iPhone. I have tried reseting the phone several times and that isn't working. Any ideas?
Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.
Maybe you are looking for
-
How can I have html5 audio continue to play in background in iOS7 from my flex mobile app
I have mobile app I've developed in flash builder 4.6 (flex 4.12 sdk) and I have a stagewebview component which contains HTML5 audio (mp3 retrieved from my web server and streamed / played via the app)... I want to have the ios version of the app CON
-
Another iMac G5 failing to start up
Hello! I'm writing for my 84-year old neighbor, whose computer has given her much stress since last summer. I believe she purchased it in 2005 (Serial #W8445*PP6). Last summer the power supply died, and was replaced; last month the hard drive died, a
-
Provider Hosted App not listed in the App Part or Web Part
What I have done: I have created developer site collection in office 365 I have created a provider app in visual studio, modified appmanifest.xml with the client id, client issue (from developer site) and provided tar
-
How to generate SCS=FINISHED event and skip phase STOP_SCS_INITIAL_ADDIN
Hi all, My SapEhpi 'upgrade' from ERP 6.0 to ERP 6.04 EHP4 is stuck in phase STOP_SCS_INITIAL_ADDIN This phase stops the SCS with a wrong parsing of the OS stopsap command So this phase is stuck, and the ABAP part stops in PHASE GETSYNC_SCS_FINISHED
-
Shipping point and Plant in CRM 4.0
Hi experts, Where do i find Plant and Shipping point in CRM Sales transaction? of CRM 4.0 version. Thanks in advance. Regards, DV.