What formula do I use to create the average across several columns?

I'm curious what the formula is for creating averages accross colums?

E2: =AVERAGE(B2:D2)
Fill down to E20.
Regards,
Barry

Similar Messages

  • What formula do I use to show the net value (less 23% tax).

    In Numbers, what formula do I use to show the net value (i.e. less 23% tax).

    thejuddo writes:
    "$100 plus sales tax of 23% would be $123.00 but in order to get the net value of $123.00 less the tax I would have to divide by 1.23 not multiply by 23% and then minus it."
    Correct;
    The 23% tax is 23 one hundredths of the base amount, and is applied to that amount. As a formula, this can be stated as:
    =B2+B2*C2
    or
    =B2*(1+C2)
    (either applying to the data arrangement shown in the top table, and entered in  D2 of that table)
    In the other direction, though (bottom table), we start with the Gross amount and the Tax rate as known quantities, from which we are to determine the base amount, remembering that the 23% Tax rate is 23% of the Base amount, not 23% of the Gross amount.
    Rewriting the two formulas above as equations, with g, b, and t as the variables, we get:
    g = b + (b * t) 
    g = b(1+t)
    Solving the second for b:
    b - g/(1+t)
    Expressed as a formula (with the data as arranged in the bottom table, and the formula in D2):
    D2: =B2/(1+C2)
    In both directions, it may be prudent to round the result to the nearer hundredth, as done here for the calculation immediately above:
    =ROUND(B2/(1+C2),2)
    Regards,
    Barry

  • What software did they use to create the tutorials for creating a podcast?

    I just downloaded the 8 tutorials that are posted on iTunes on how to create a podcast. What I am really looking for is what program they might have used to create those tutorials. The screen capture has some very nice features, like highlighting certain areas, dimming the background, voice and video capture, zooming into certain areas. I don't think it is Snapz but I could be corrected.

    Hey thanks for answering.
    The tutorials show how to use Garageband and are really quite nice. What I am after though is the software they might have used to create those tutorials.
    Go to iTunes > music store > podcasts and type in "learn to podcast" it will be the top choice. And look at one of them, very nice creen capture functionalities.
    Thanks, Frank

  • What application should i use to create the xml data as the input data for XFA template

    HI,
    I need to generate pdf or html document form from existing XDP with the given xml formatted data set. We usually use word to generate content for those XFA template, as the data should be in xml format content in word document should be able to convert into xml document that is compatible with XFA template. I want to know if there is any tool to conver word doument content to xml format that is compatible with XFA template or has adobe given their own tool to create content that comply with XFA template? . Also i want to know if i can do above mention functionality jaut with adobe forms if not what are the other services that i should use. Please give me the prices of adobe forms and any other tool that i should use. Thank you

    XFA is just the definition of the form template. Once you have an XFA based template, you can merge any XML you want.
    The trick is do the appropriate binding so the data from the XML goes in the right fields on your form. This binding is done using LiveCycle Designer.
    Jasmin

  • What programming language is used to create applicaitons for the iPad

    I was curious what programming language is used to create applications for the iPad.

    http://developer.apple.com/ipad/sdk/

  • What program filenames are used to create PDFs?

    We are in school where we restrict what type of programs the students can access by filenames (e.g. Word.exe, Excel.exe), using the Windows 2003 Group Policy "Run only Windows Applications" policy.
    I've added all the programs I can in the Adobe folder into the policy(e.g. Acrobat.exe and so forth).
    However, whenever the students try to create a PDF from an application, say Word 2003, the restrictions kick in "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator."
    Printing to physical printers works fine. It's only when I try to print to Adobe PDF does the error message occur. I can't find out what program adobe is trying to use to create the PDF.
    I've tried process tracking and the registry to find out what uses it and I can't find it.
    When I try as a student going into Adobe Acrobat 8 Professional and try to Create PDF....from file.... the "Starting the application which created the selected document. Please wait" appears then states: "Acrobat could not open xrd.doc' because it is wither not a supported file type or because the file has been damaged (for example, it was sent as an e-mail attachment and wasn't properly decoded).
    To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
    Which, of course, I've tried as the first step.
    The clients are running Windows XP Service Pack 2, with Office 2003 as the program they are trying to create from.
    The software being used is Adobe Web Premium CS3.
    Server Enviorment: Windows 2003 Server Service Pack 2
    Client Spec: Pentium 4, 512Mb-1024Mb of memory, 40 gig hard disk
    Can anyone help? Some students need to create PDF documents as part of their coursework and time is looming.

    That worked!
    Now getting the error message "Adobe PDF Creation cannot continue because Acrobat is not activated," but looking at the KB for a solution for that. It still prints out the PDF fine.
    Many Thanks.

  • A simple percentage? How does one add a percentage to a number? If I have 100 and I want to add 15% and get a total, what formula would I use?

    How does one add a percentage to a number? If I have 100 and I want to add 15% and get a total, what formula would I use?

    You can do something like this:
    D2=B2*(1+C2/100)
    this means in the cell D2 type the following "=B2*(1+C2/100)"... leave out the double quotes

  • What software usual is used to create installation package for client appli

    What software usual is used to create installation package for client application?

    >
    I mean the software that installed my application on client's machine. E.g. by click button Next, Next ...>Try clicking some of the 'buttons'(1) on the [webstart API examples|http://pscode.org/jws/api.html] page.
    (1) They are not HTML buttons, but links stylde to look vaguely like buttons. HTML buttons can be used just as easily, see [Launch JNLP App - launch style|http://pscode.org/jws/launch.html] for an overview of different launch styles.

  • What tool can i use to create an animation for iPad

    What tool can i use to create an animation the will run in I.E., Firefox and iPad. I want to have a series of large buttons that i can scroll using arrows on the left and right side of the large buttons, with each button  being a hot spot. I can't use Flash because it is not supported on the iPad.
    Thanks,
    Steve

    I've been playing with both Edge and Hype, and I found that stuff I create in Hype actually works in IE 8, but stuff I create in Edge does not. I'm not sure what the difference is, other than perhaps Hype automatically writes some legacy scripts so that things will work in IE. Hype's not perfect, but it's doing the job for what I needed it to do, where Edge was no help at all (working in IE I mean).
    I think Edge is a much better tool - more robust, greater feature set, but Hype seems a bit more forgiving and seems to play nicer with crappy browsers like IE.

  • What port numbers are used when creating temporary queues

    Using the following code as an example, what port(s) are used when creating temporary queues? Is it a range of ports? Is it random? And is it configurable? If you have any insight on this, please let me know. Thanks.
    QueueConnection con = connectionFactory.createQueueConnection();
    QueueSession session = con.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
    TemporaryQueue replyQueue = session.createTemporaryQueue();

    The only ports I know about are the defaults ports:
    JMS 7676
    IIOP 3700
    Are these the only ports that are used, even for temporary queues?

  • What formula can I use?

    I am creating a price list for all my products. This list acts as a database for invoice printing when customer comes to buy.
    The logic is that once I input a product code in the invoice, the invoice can fill up automatically by looking up data from the price list. There are 3 prices for a product: first for normal customer, second for superior customer and third for VIP customer.
    Make it simple, in the price list, it goes like this:
    Product code |001|002|
    Normal price |$40|$80|
    Superior price |$38|$75|
    VIP price |$35|$68|
    In the invoice
    Product code|Product Name|Customer Type|Price|Quantity|Subtotal|
    001 | XXX | Superior | | | |
    So which formula I can use so that the correct price will show in for the correct product?
    I think it needs multiple formula to accomplish. Need help!!! Thank so much.

    Hi k'
    Welcome to Apple Discussions and the numbers '09 forum.
    Assuming that a customer will have the same 'customer level' for all products, I would make one change to the Invoice table he proposes.
    Rather than placing a 'customer level' pop-up on each row of the invoice, place a single cell in the Customer Information portion of the invoice (which could be on a separate table on the same sheet), then use a fixed reference to that cell in place of the $C2 reference in Yvan's formula.
    KOENIG Yvan wrote:
    Cell C2 is defined as a popUp menu with the values : Normal, Superior, VIP
    In cell D2, the formula is :
    =IFERROR(VLOOKUP($A2,Prices :: $A:$E,HLOOKUP($C2,Prices :: $1:$2,2,0),0),"")
    For the example formula below I've placed the popup on a new table, "Sold To", that would contain the customer's name, address, etc. and the customer level for that customer. The 'customer level' pop-up is in cell B5
    Yvan's formula becomes:
    =IFERROR(VLOOKUP($A2,Prices :: $A:$E,HLOOKUP(Sold To :: $B$5,Prices :: $1:$2,2,0),0),"")
    Regards,
    Barry

  • "The player used to create the project could not be found"

    After installing Adobe Premiere Pro CC 2014, I have had issues with Encore, which worked fine before. This is the message I get when starting Encore:
    "The player used to create the project could not be found, Adobe defaulting to Adobe player".
    Once I attempt to open a saved project, the message is "Adobe Encore could not find any capable video play modules. Please update your video display drive and start again". I can't create a new project because the program crashes in the attempt.
    I have uninstalled and reinstalled Encore. All drivers are up to date. I am running the program as an administrator.
    Sony Vaio E Series
    Windows 8
    Any ideas what to do?

    Hi Ann,
    Thanks for responding - your answer improved things quite a bit - I installed the latest AMD driver, which seemed to help quite a bit - it added some functionality to Encore. I'm still getting an error message, but the program appears to be functioning in spite of it.
    Thanks again

  • How do I access my encrypted User Account files from my Back Up hard drive?  Time Machine  was used to create the back up disk; File Vault was used to encrypt the files.

    How do I access my encrypted User Account files from my Back Up hard drive?  Time Machine  was used to create the back up disk; File Vault was used to encrypt the files.

    Thanks.  I will try going through TM.  Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive.  Any advice or warning if this is NOT the right thing to do?
    Meanwhile, that is a great tip to do an alternate back-up using a different means.  It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility.  Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it.  Will look into
    Carbon Copy Cloner.

  • Evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?

    evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?

    ''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
    ''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
    EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

  • What method should be used for resizing the particular JTable Column width

    I have a four table. Only one table which are on top have a table header. I want that when user resize the topmost table with a mouse other table colume also be resized automatically. So I want to know that what method should be used for resizing the particular JTable Column width.
    Thanks
    Lalit

    maybe you can implement a interface ComponentListener as well as ComponentAdapter with your topmost Table.
    for example:
    toptable.addComponentListener(
    new ComponentAdapter(){
    public void componentResized(ComponentEvent e){
    table1.setSize(....);
    table2.setSize(....);
    /*Optionally, you must also call function revalidate
    anywhere;*/
    );

Maybe you are looking for