What happened to mu pop-up-blocker?

Some pop-ups open while i only have one site allowede to open pop-ups. whwn i look in the tools, pop-up-blocker is active and only my one site is allowed. Still other sites are able to open pop-ups.
This never happened in the past.

http://kb.mozillazine.org/Popups_not_blocked

Similar Messages

What happened to my pop-up menu?

As I'm redesigning this site (MUCH work to do), I've inserted
a DW pop-up menu for the "Competitions in Review" link. It worked
before I did a slight page redesign... Any clues as to what
happened?
http://www.hhipc.org

http://www.hhipc.org/mm_menu.js
This file isn't on your server. Or at least not where it's
supposed to be,
apparently. Make sure you upload this file to the proper
place.
http://www.hhipc.org/2007Competition/HHIPC%20logo.jpg
This image is distorted because the code size doesn't match
the actual size.
http://www.hhipc.org/2007Competition/RedPiano.jpg
this image has a discrepancy between it's actual size and
it's coded size.
The distortion is less noticeable here than the logo image
because the text
in the logo is more vulnerable to such distortion.
http://www.hhipc.org/2007Competition/steinway.jpg
http://www.hhipc.org/2007Competition/HHSO.jpg
The text in these two images is fuzzy because it's fuzzy. You
might do
better with some anti-aliasing in your graphics app and
saving at a bit
higher resolution.

What happens when calls/txts are blocked for a number?

I figured out how to block incoming calls/txts from a phone number in spam controls. What happens if they try to call or text? Are they aware that the number is blocked or does it seem "normal" except I don't receive anything?

Blocked individuals who call a customer will hear the message:
"Welcome to Verizon Wireless. The number you were trying to reach has calling restrictions which has prevented the completion of your call."
If someone tries to text you from a number you have blocked they will get an error that the text failed to send. You will not receive any notification that a blocked number attempted to text you.
Taken from MorganB HERE and HERE

What is the best pop up blocker?

My pop up blocker is turned on in safari. I keep getting terrible pop ups, but only when using the wifi at my home. Everyone else using the same wifi has the same problem so I'm pretty sure it's our internet provider (which is Cox Communications). Don't ever use them. They have terrible customer service and internet.
I don't want to download anything dangerous from the internet so I'm asking y'all to recommend a safe site I can download a popup blocker from. I'd like it to be free if that's possible.
Thanks!

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

What happened to our ability to block people who a...

What has happened to the button that allowed us to block scammers/spammers? I got a skype thing tonight and I want to block the one who tried to contact me, but that is no longer available on my skype. What is going on and why has that feature been dropped?

HI,
It used to be that you could drag a Pic to the Background (Active Chat part) rather than the Text Entry field then the Pic would become the background and in some cases tiling.
It could also be dragged to the Preferences > Messages section (like you can see the Font and colour choice you make).
However as you have found out it seems to have been removed.
Despite saying iChat and being several OSes and iChat versions out already I would use this page
http://www.apple.com/feedback/ichat.html
10:14 PM Monday; September 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

What happened to 'Show Pop-Up Menu' in Dreamweaver CS6?

I've been using Dreamweaver for several years now and through several different versions. In Dreamweaver 8, under Behaviors, I had 'Show Pop-Up Menu' as a way to create attractive menus. Now in CS6, it is gone. Is there a way to get it back or at least an alternate way of adding pop-up menus?

The menus that were part of the older version of DW using javascript have been deprecated. In addition, the CS6 Spry feature has also been deprecated. As a result you are left with a few options.
Option 1 - Get an addon from the exchange (Adobe Add-ons ) or from third party sources like PVII ( Projectseven.com - Products ).
Option 2 - Consider a framework or CMS that comes with a drop down menu code or UI admin option to maintain the menu.
Given that you still have a menu on your website, for the time being, you should be able to edit the code to maintain the menu, but moving forward I would definitely seek out an alternative solution.

What happens when I compile a block

Dear buddies,
I am going to compile a script written by my manager. It starts with declare -- begin -- end --
Just by compiling it, will I be running the block? or how does it work? I am using PL/SQL Developer
Could someone guide me.
Thank You!
Nith

P. Forstmann wrote:
I don't know how PL/SQL Developer works but according to Oracle documentation it seems that you can only compile and run at the same time a anonymous PL/SQL block. You can compile only (or more correctly, just do a parse). E.g.
SQL> --// basic SQL parser
SQL> create or replace procedure SQLparse( statement varchar2 ) is
2          cur     number;
3 begin
4          cur := DBMS_SQL.open_cursor;
5          DBMS_SQL.parse(
6                  cur,
7                  statement,
8                  DBMS_SQL.native
9          );
10          DBMS_SQL.close_cursor( cur );
11 end;
12 /
Procedure created.Calling this will create a cursor in the Shared Pool. Nothing will however execute as yet. The cursor will be shareable and reusable (and should be using bind variables to improve both these). E.g.
SQL> --// parse a cursor
SQL> exec SQLparse( 'begin /* BLOCK */ :s := to_char(sysdate); end;' );
PL/SQL procedure successfully completed.
SQL>
SQL> --// check the shared pool for the cursor that
SQL> --// was created
SQL> select executions, sql_text from v$sqlarea where upper(sql_text) like 'BEGIN /* BLOCK */%';
EXECUTIONS SQL_TEXT
         0 begin /* BLOCK */ :s := to_cha
           r(sysdate); end;
SQL>
SQL> --// check reusability
SQL> var s varchar2(20)
SQL> begin /* BLOCK */ :s := to_char(sysdate); end;
2 /
PL/SQL procedure successfully completed.
SQL>
SQL> select executions, sql_text from v$sqlarea where upper(sql_text) like 'BEGIN /* BLOCK */%';
EXECUTIONS SQL_TEXT
         1 begin /* BLOCK */ :s := to_cha
           r(sysdate); end;
SQL> So this works pretty much the exact same way as with ordinary SQL. A cursor is created in the shared pool. This cursor contains both the source code and compiled version. It will be reused when the same source code hits the database while the cursor exists. Etc.
The only real difference is that instead of the cursor containing SQL code, it contains PL/SQL code. The rest is identical - and neither the SQL nor the PL/SQL (source and compiled) code for this is stored permanently in the database (as would be the case with stored procedural code).

What happens to the iMessages a blocked contact sends you? Will recieve those messages once you unblock them?

Blocked users, where iMessages go

In my experience the Message will show as delivered at the senders end but on the device that has blocked the number the message will never be received, even if the number is unblocked at a later date the messages sent while it was blocked won't ever be received.

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

Since i updated my iphone to ios7, i can no longer download applications and also cannot update my apps. what happened? there is an alert popping and it tells that i should switch to Philippine store.

since i updated my iphone to ios7, i can no longer download applications and also cannot update my apps. what happened? there is an alert popping and it tells that i should switch to Philippine store.

Hi, sallymaesmag.
Thank you for visiting Apple Support Communities.
If you are in the Philippines, check to see if the country is changed in the iTunes Store settings on the iOS device. These steps will show you how to change the preference.
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. TapSettings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Once you make the change attempt to download applications again.
Jason H.

I have my pop up blocker off but when I o to fill out an assessment on a job application it says I have a pop up blocker on that I must disable why could this be happening and how do I fix iut

I have my pop up blocker disable but it is still saying I must disable pop up blocker why would this happen and how do ifix it

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

POP server rejected password message??? What happened?

I get this error message:
The POP server “pop-server.roadrunner.com” rejected the password for user “[email protected]”
Please re-enter your password, or cancel.
I just got it this evening and my mail won't accept my password. I tried to access my mail it via WWW and it won't accept my password either. What happened? It was fine this AM. My ISP is via time/warner. Any help is appreciated.

So I looked at your post again. Does adelphia.net now use “pop-server.roadrunner.com” as it's POP mail server?
On p.4 of this PDF, it says you should be using the following settings:
Email Client Settings
Username: {your [email protected]}
Password: {your password}
Incoming (POP3)
Server: mail.adelphia.net
Outgoing (SMTP)
Server: mail.adelphia.net
So maybe some of your mail prefs account settings were inadvertently changed to the wrong stuff so you are now inadvertently trying to connect to the wrong server with the wrong username?
That still doesn't answer why you can't connect via webmail at https://webmail.adelphia.net/webedge , though...

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

What happened to the "Block Popup Windows" menu item in Safari 6?

What happened to the "Block Popup Windows" menu item in Safari 6? Seems to be gone.

Shheesh! Loki is saying that this was a very useful tool/option. Is there any way to BRING IT BACK TO THE SAFARI MENU? Not how to do it in Preferences.
What I am saying is: What incompetent is responsible for this build of Safari? There was no reason to take that out... plenty of room in the Safari menu. But if you REALLY want to know why I'm ******, Older people can no longer go into "Appearances" and change the Fonts and Size without knowing how to use terminal or how to make .css files. (which doesn't work well anyway)
This build is infuriating.

When I try to open a video, or farmville I get "blocked plug-in", what happened?, when I try to open a video, or farmville I get "blocked plug-in", what happened?

when I try to open a video, or farmville I get "blocked plug-in", what happened?

Hi maryd94928647,
Could you please specify more on the same.
Where exactly are you signing in?
What kind of video are you trying to open?
Let me know.
Regards,
Anubha

What happened to mu pop-up-blocker?

Similar Messages

Maybe you are looking for