What happened to my notes!!! I was writing a lot and suddenly a weeks worth disappeared. If this happens again I'm getting a galaxy
I have been writing 1000 words per day and zap! Everything back a week is gone. Multiple files. I know my butt didn't erase it. This is so messed up. It is worth more than my phone. Is there any chance I could get it back?
There are many people that I run into with similar problems. I am not stupid. I am a college professor and teach a lot of engineers. I am busy and work very hard. I was trying to write chapters to my book on my phone since I can do that on the fly. I was very upset when the information disappeared. The last thing I need is some apple blogger telling me they don't know what Mac is in a condescending way. If the phone worked right in the first place, I wouldn't need to back it up multiple times per day in fear of losing stuff. I don't have time to become an expert on wiping and reinstalling software and navigating multiple iTunes accounts. I had a one on one subscription and they could never figure it out either. If I could merge iTunes accounts, it would certainly simplify my experience. I would pay good money to merge my iTunes accounts.
Similar Messages
-
I was editing on FCE and suddenly my entire project needed to be rendered AGAIN.
WHAT'S UP WITH THIS? Here's what happened: I put music in a line and then rendered it. Then music/titles/extra lines disappeared and red line to render reappeared. The whole format just looks different. Could this have to do with the fact that I started this project on iMovie? That doesn't seem likely since I exported it as XML and it was working perfectly until this. Help??
If the audio is not AIFF 16bit/48khz, you will be continuously rendering.
Best to convert any audio to AIFF 16bit/48khz before bringing it into Final Cut. You can use iTunes to do it.
Good luck.
x -
I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?
Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt -
Help. Mac mail sends myemails prematurely while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I've lost the voice track when I listen to music with headphones.What happened? Can I get the complete sound back?
Try compressed air. Try tweezers and a magnifying glass with good light.
The next step would be to Google an iPhone repair service in your area or use this as a good reason to upgrade.
Hint: there's a Reply button at the bottom right of each post so you can reply to the appropriate poster and not yourself. -
What happens when the computer get too full of e-mails? Will it automatically start deleting ... or give you some kind of warning?? I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got a big backlog.
It will not automatically delete any emails; you will need to do that. You may suffer performance issues in Mail if you let your mailboxes become too bloated. And, aside from Mail, the files take up a lot of room are photos, videos, and music, so you might want to watch those - every once in a while, check how much hard drive space you have and make sure you empty the trash regularly. Checking your hard drive space: highlight your Macintosh HD icon on the desktop; hit Command + I and check the total capacity, and how much is left.
-
Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.
read this and see if it helps: http://support.apple.com/kb/ht2090
-
Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Please Help. Thanks in advance.
I think you should make an Genius Appointment.
Genius Appointment
http://www.apple.com/retail/geniusbar/ -
I changed my 4 digit password to lock the screen and forgot what I changed it to. Now phone is disabled and says connect to itunes. Has this ever happened to anybody? How can I fix this? I share my phone bill with my mom and my itunes account with my husband? I have all the apple ID's if needed
http://support.apple.com/kb/HT1808
-
HT3406 What if I do not have the original SIM card and am no longer have an activated iphone?
What if I do not have the original SIM card and am no longer have an activated iphone?
Is the phone locked to a carrier? If it is not locked you should be able to activate it with any SIM and not necessarily an active sim.
USING AN IPHONE AS AN IPOD
Restore your phone as new. Place a SIM card into the phone and connect it your computer with iTunes open and follow the activation assistant to activate the iphone. Once the iphone have been activated remove the SIM card and turn on imessage in settings/messages. Only your Apple ID should appear in the “You can be reached by imessage at” and “Start new conversation from” fields. Read the following article for help http://support.apple.com/kb/HT3406 -
i was chatting on skype and suddenly my camera disappears, prompting no camera detected...please let me know what to do though i tried many options....still failure.
http://discussions.apple.com/docs/DOC-6431
-
Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?
Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
Sorry
This feed does not validate.
line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
^
line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
^
line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
<itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
^
In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
^ -
Ho there I have an iPhone 4 and is currently away for service but I wondered if it will be covered by the warranty as the silent button was broken and I sent for a box and as the box was being delivered I was juggling a lot and dropped my phone in water. I wondering if it will be covered due to the fact the button was broke before the water damage.
ThanksMost likely not but only Apple can say for sure.
-
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.
Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>
Maybe you are looking for
-
HP M2727 printer/scanner not recognized as scanner
I have HP M2727 printer/scanner but the OS X system does not recognize the scanning function. Consequently I cannot use "Image Capture" or "Preview" to scan. The HP Director that was working does not now work. Currently on OS X - Version 10.9.5 An
-
Hi, I would like to install ECC 6.0 with Oracle 10.0.2.4, but the question is, if is possible to put all databases in one server. DEV + QAS + PRD (DB) in one server and the SAP would be on other server. This instalation will be on Linux, and on the S
-
Sorry Server redirect to HTML file hosted on ACE
Is there any possibility to have the ACE return a simple HTML file when all servers in the serverfarm fails and the backup serverfarm gets traffic?
-
508 "Alt tagging" of images in Captivate?
Hi, I have a Capitvate files that's published as an exe which needs to be fully 508 Compliant. Does anyone have any ideas how to enable ALT tagging of images in an exe? Is that even possible? I thought that you could only do this for web content. I s
-
OTL Absence Management Integration Issues
We are planning to implement OTL integration with Absence Management. We want to capture unit as DAYS and would like to capture half day leave as well. We applied for half day leave (0.5) in Absence Management, when reviewing the information from OTL