What I need to do after installing agent?

Hi
All
I have OMS on windows server and Agent on AIX.
When I give
$ emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u07/app/oracle/product/10.2.0/moe.wsi.gov_OWSIDEV
Agent binaries : /u07/app/oracle/product/10.2.0
Agent Process ID : 290920
Parent Process ID : 364582
Agent URL : http://moe.wsi:3938/emd/main
Started at : 2007-10-10 12:00:36
Started by user : oracle
Last Reload : 2007-10-10 12:00:36
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 2067
Size of XML files pending upload(MB) : 22.00
Available disk space on upload filesystem : 36.93%
Agent is Running and Ready
What Does Output Imply?
So, When I discover the target from grid control it says like target not found.
What do I need to do?
Thanks,
Vishal

Hi vishal,
The way it works is:
OMS talks to agent using EMD_URL (i.e..port 3872) and Agent talks to OMS using REPOSITORY_URL (i.e,. port 4889 or 1159).
Both these URL info is present in emd.properties file
location is : AGENT_HOME/sysman/config
once your agent is installed SUCCESSFULLY,
under AGENT_HOME/bin
use the below command to check the list of targets:
emctl config agent listtargets
regards,
Vamsi

Similar Messages

What do I need to do AFTER installing RAM

OK
I just upgraded two G5 dual processor machines in my dept.
Went from 2.5G to 4G in one and 1G to 4G in the other.
I really have not noticed any sizeable improvement in speed.
System profiler says "OK" on memory. They are all matched, same brand etc...
MAC HELP did not have any tips about installing RAM.
My question is; must I do anything AFTER installing RAM such as reset PRAM, permissions etc...

No. There is nothing more you need to do.
Going from 2.5 to 4 will probably not make that much difference, unless you are using high-end apps like Final Cut Pro that use a lot of RAM, or you run many apps at the same time.
I definitely noticed a big difference going from 0.5 to 1.5. I only noticed a small difference going from 1.5 to 2.5.

Opensso : problem load opensso admin console page after install agent

Hi,
After installing policy agent for Tomcat in another instance,
I could not load opensso admin console as usual (http://opensso.local.asyd.net:8000/opensso/UI/Login). The message
given:
root cause
javax.servlet.ServletException: Servlet execution threw an
exception
     com.sun.identity.setup.AMSetupFilter.doFilter(AMSetupFilter.java:91)
root cause
java.lang.NoClassDefFoundError
     com.sun.identity.authentication.client.AuthClientUtils.<clinit>(AuthClientUtils.java:136)
or
com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:106)
The tomcat log gave this message:
SEVERE: Servlet.service() for servlet LoginServlet threw exception
java.lang.NoClassDefFoundError
     at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:106)
+++++++++++++++++++++++++++++++++++++++++
I have 2 Tomcat instances on one machine:
/home/opensso/apache-tomcat-6.0.18 (where the open sso server is deployed)
/opt/tomcat-instance/opensso.local.asyd.net (where the web server client is deployed and agent is installed)
Here is the response summary of my agent installation:
SUMMARY OF YOUR RESPONSES
Tomcat Server Config Directory :
/opt/tomcat-instance/opensso.local.asyd.net/conf
OpenSSO server URL : http://opensso.local.asyd.net:8000/opensso
$CATALINA_HOME environment variable :
/home/opensso/apache-tomcat-6.0.18
Tomcat global web.xml filter install : false
Agent URL : http://opensso.local.asyd.net:8081/mini-agentsample
Agent Profile name : AS9Agent
Agent Profile Password file name :
/opt/tomcat-instance/tomcat_v6_agent/tomcat6agentpw.txt
Verify your settings above and decide from the choices below.
1. Continue with Installation
2. Back to the last interaction
3. Start Over
4. Exit
Please make your selection [1]: 1
Updating the /home/opensso/apache-tomcat-6.0.18/bin/setclasspath.sh
script with the Agent classpath ...DONE.
Creating directory layout and configuring Agent file for Agent_001
instance ...DONE.
Reading data from file
/opt/tomcat-instance/tomcat_v6_agent/tomcat6agentpw.txt and
encrypting it ...DONE.
Generating audit log file name ...DONE.
Creating tag swapped OpenSSOAgentBootstrap.properties file for instance
Agent_001 ...DONE.
Creating a backup for file
/opt/tomcat-instance/opensso.local.asyd.net/conf/server.xml ...DONE.
Creating a backup for file
/opt/tomcat-instance/opensso.local.asyd.net/conf/web.xml ...DONE.
Adding OpenSSO Tomcat Agent Realm to Server XML file :
/opt/tomcat-instance/opensso.local.asyd.net/conf/server.xml ...DONE.
Adding filter to Global deployment descriptor file :
/opt/tomcat-instance/opensso.local.asyd.net/conf/web.xml ...DONE.
Adding OpenSSO Tomcat Agent Filter and Form login authentication to
selected Web applications ...DONE.
SUMMARY OF AGENT INSTALLATION
Agent instance name: Agent_001
Agent Bootstrap file location:
/opt/tomcat-instance/tomcat_v6_agent/Agent_001/config/OpenSSOAgentBootstrap.properties
Agent Configuration file location
/opt/tomcat-instance/tomcat_v6_agent/Agent_001/config/OpenSSOAgentConfiguration.properties
Agent Audit directory location:
/opt/tomcat-instance/tomcat_v6_agent/Agent_001/logs/audit
Agent Debug directory location:
/opt/tomcat-instance/tomcat_v6_agent/Agent_001/logs/debug
Install log file location:
/opt/tomcat-instance/tomcat_v6_agent/installer-logs/audit/install.log
Thank you for using OpenSSO Policy Agent
Edited by: enterprisecoder on Jun 27, 2010 8:19 PM
Edited by: enterprisecoder on Jun 28, 2010 12:37 AM
Edited by: enterprisecoder on Jun 28, 2010 2:14 AM
Edited by: enterprisecoder on Jun 28, 2010 8:19 PM

Hi
I am facing the similar issue after installing the policy agent on tomcat 6.x
Installation gets successfully, but once I start the tomcat server secured by agent than I get below error
Dec 23, 2010 2:43:44 PM org.apache.catalina.core.AprLifecycleListener init
INFO: Loaded APR based Apache Tomcat Native library 1.1.20.
Dec 23, 2010 2:43:44 PM org.apache.catalina.core.AprLifecycleListener init
INFO: APR capabilities: IPv6 [true], sendfile [true], accept filters [false], random [true].
AgentConfiguration: Exception while reading new mod interval: "null"
Dec 23, 2010 2:43:45 PM org.apache.tomcat.util.digester.Digester startElement
SEVERE: Begin event threw error
java.lang.ExceptionInInitializerError
at com.sun.identity.agents.arch.Manager.<clinit>(Manager.java:643)
at com.sun.identity.agents.tomcat.v6.AmTomcatRealm.<clinit>(AmTomcatRealm.java:64)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.apache.tomcat.util.digester.ObjectCreateRule.begin(ObjectCreateRule.java:206)
at org.apache.tomcat.util.digester.Rule.begin(Rule.java:153)
at org.apache.tomcat.util.digester.Digester.startElement(Digester.java:1356)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501)
at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
at org.apache.tomcat.util.digester.Digester.parse(Digester.java:1642)
at org.apache.catalina.startup.Catalina.load(Catalina.java:510)
at org.apache.catalina.startup.Catalina.load(Catalina.java:548)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:261)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Caused by: java.lang.RuntimeException: Unknown User Mapping Mode: null
at com.sun.identity.agents.arch.AgentConfiguration.setUserMappingMode(AgentConfiguration.java:865)
at com.sun.identity.agents.arch.AgentConfiguration.setHotSwappableConfigProps(AgentConfiguration.java:1170)
at com.sun.identity.agents.arch.AgentConfiguration.initializeConfiguration(AgentConfiguration.java:1098)
at com.sun.identity.agents.arch.AgentConfiguration.<clinit>(AgentConfiguration.java:1543)
... 31 more
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:261)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Caused by: java.lang.ExceptionInInitializerError
at com.sun.identity.agents.arch.Manager.<clinit>(Manager.java:643)
at com.sun.identity.agents.tomcat.v6.AmTomcatRealm.<clinit>(AmTomcatRealm.java:64)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.apache.tomcat.util.digester.ObjectCreateRule.begin(ObjectCreateRule.java:206)
at org.apache.tomcat.util.digester.Rule.begin(Rule.java:153)
at org.apache.tomcat.util.digester.Digester.startElement(Digester.java:1356)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501)
at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
at org.apache.tomcat.util.digester.Digester.parse(Digester.java:1642)
at org.apache.catalina.startup.Catalina.load(Catalina.java:510)
at org.apache.catalina.startup.Catalina.load(Catalina.java:548)
... 6 more
Caused by: java.lang.RuntimeException: Unknown User Mapping Mode: null
at com.sun.identity.agents.arch.AgentConfiguration.setUserMappingMode(AgentConfiguration.java:865)
at com.sun.identity.agents.arch.AgentConfiguration.setHotSwappableConfigProps(AgentConfiguration.java:1170)
at com.sun.identity.agents.arch.AgentConfiguration.initializeConfiguration(AgentConfiguration.java:1098)
at com.sun.identity.agents.arch.AgentConfiguration.<clinit>(AgentConfiguration.java:1543)
... 31 more
Exception in thread "SystemTimer" java.lang.NoClassDefFoundError: Could not initialize class com.sun.identity.agents.arch.AgentConfiguration
at com.sun.identity.agents.arch.AgentConfiguration$ConfigurationMonitor.getRunPeriod(AgentConfiguration.java:1397)
at com.sun.identity.common.TimerPool$WorkerThread.run(TimerPool.java:504)

Do I still need Lightoom 5 after installing New Lightroom 2015

can I unstall Lightroom 5 after installing Lightroom 2015 with CC

And how is it possible to uninstall LR5, once LR6 has been installed and the Catalog converted?
The CC App does not offer an option to uninstall LR5 - it says "Uninstall unavailable."
I've tried logging out, logging in, rebooting, there is still no option to uninstall LR5.
It does offer the option to remove PS CC and LR CC, just not LR5?
Do I have to resort to using AppCleaner? The CC App cannot remove LR5?

What do I need to do after installing a new hard drive?

I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

Does anyone know what the partitions look like after installing boot camp on a 3T fusion drive

I installed a boot camp partition on a 3T fusion drive. Running disk utility afterward it looks like this.
Is this what it should look like? I understand about the need for bootcamp to create 2 physical drives in core storage in order to install boot camp on a 3T fusion drive but should I see both drives after it is done?

What to do with iPhoto after installing and migrating to Photos?

I'm basically trying to understand what goes on with the pictures after migrating to the new Photos app:
After migrating to Photos I tried to open iPhoto which warns me that changes will not be visible in Photos. Fine, but will changes still be present in iPhoto? There are some pictures in the trash bin, which I guess will stay until I remove them from there?
I see both an iPhoto and Photos library among in my Pictures folder, about the same size. From the total disk space I do not think they are duplicates. How does it work?
Can iPhoto be removed, removing all traces, with no adverse effects on my photo library?
Another related issue that I haven't figured out: I heard that when editing in iPhoto the application would create a new image and save it on disk, while e.g. LightRoom would just store the edit information? Is it true, and how is it done in Photos?

I see both an iPhoto and Photos library among in my Pictures folder, about the same size. From the total disk space I do not think they are duplicates. How does it work?
iPhoto and Photos are sharing the image files using hard links. The photos are only once on your disk, see:
Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
After migrating to Photos I tried to open iPhoto which warns me that changes will not be visible in Photos. Fine, but will changes still be present in iPhoto? There are some pictures in the trash bin, which I guess will stay until I remove them from there?
The changes will stay applied in the iPhoto Library, yes. And empty the iPhoto Trash, if you want the trash deleted.
Can iPhoto be removed, removing all traces, with no adverse effects on my photo library?
It could, but I would wait a bit, before take this step. Check your photos library thoroughly, before you delete if.
If you should discover later, that the migration of your libraries has been faulty and you need to repeat it after repairing your libraries, you will be out of luck.
Remember, it is is just a few days after the first release of Photos as version 1.0. There are very likely some bugs and I would not burn all bridges before the library has been thoroughly tested and you are very confident, that this early Photos release is working well on your Mac.
Another related issue that I haven't figured out: I heard that when editing in iPhoto the application would create a new image and save it on disk, while e.g. LightRoom would just store the edit information? Is it true, and how is it done in Photos?
iPhoto and Photos have a lossless workflow like Lightroom. They store the sequence of edits, and create only a preview image of the edited version. When you add further edits, all edits will be applied starting from the original image, and all edits can be removed and the photo reverted to the original. With Photos this works also with iCloud Photo Library across all your devices. Edit a photo on your Mac and change the edits on our iPhone.

What steps need be done after database is moved to another machine

concurrent manager can not run anymore after i move the 'VIS' database to another machine.
what steps i need to perform at application side to correct it?

Hi,
Have you moved the database or the application as well? This sounds like a cloning / autoconfig issue, but it depends on what you have done so far.
Kind Regards,
Steve

No traps received after installing agents

On my initial install for the management server, I also installed the
agent on it, as well as one other server for testing. Once those
started working and I was receiving traps from each one, I installed the
agent on several other servers, but I am not receiving any traps from
those servers.
One clue is that when I go into Trap Configuration and I add those
particular servers/agents, when I click Show Status, I get "The agent
<ip address> is not responding".
These servers are no different then the ones I tested with. All have
identical configurations with regards to SNMP. I've verified that
nma5.ncf is running on these servers, even unloaded and reloaded. I've
reinstalled the agent as well. No dice...

could be that the trap receiver was not active yet..this can be set in
inetcfg and activate with a reinitialize system or the NMA agents weren't
loaded yet.
"Joe F." <[email protected]> wrote in message
news:Beyni.281$[email protected]..
> Joe F. wrote:
>> On my initial install for the management server, I also installed the
>> agent on it, as well as one other server for testing. Once those started
>> working and I was receiving traps from each one, I installed the agent on
>> several other servers, but I am not receiving any traps from those
>> servers.
>>
>> One clue is that when I go into Trap Configuration and I add those
>> particular servers/agents, when I click Show Status, I get "The agent <ip
>> address> is not responding".
>>
>> These servers are no different then the ones I tested with. All have
>> identical configurations with regards to SNMP. I've verified that
>> nma5.ncf is running on these servers, even unloaded and reloaded. I've
>> reinstalled the agent as well. No dice...
>
> Well, due to a power outage, I found out that when several of that servers
> were rebooted, I started receiving traps from those servers that weren't
> working before. Anyone know why this might be?
>
> And more importantly, does anyone actually read this forum???

What happened to "Google search", after installing, the darn thing goes to Yahoo? How do I get Google back?

The typical "Google search" isn't even displayed on the Firefox startup page. Frustrating!!!

Please do the following:
* In the location bar, type '''about:config '''and hit Enter.
* In the filter at the top, type: '''keyword.URL'''
* Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
* Go to File | Exit
* Restart Firefox, go to the site you want to set as your homepage.
* Go to '''Tools '''| '''Options '''| '''General'''.
* Make sure it says "''Show My Homepage''" in the first dropdown menu.
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down after install of new 2nd internal WD IDE 320 gig hard drive, OS 10.4.11, orig HD is WD 80, RAM = 2 gig. Help!

Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down, is now occuring after install of new 2nd internal WD IDE 320 GB hard drive, running OS 10.4.11, orig HD is WD 80 GB, RAM = 2 gig. Help!

Hi Ted,
At this point I think you should get Applejack...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
Ignore the MacKeeper ad no matter what else you decide.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.

No Sound after installing Xfce

Hello, I'm having a strange problem. After installing xfce I've got no sound in my system. I have an Asus Xonar DX and usually the only thing I needed to do after installing a new system was to select it in the audio controller but this time it doesn't work. I tried uninstalling xfce4-mixer and install paprefs pavucontrol and set the card there but it doesn' t work and I don't know what else to try.
http://i60.tinypic.com/6i6wcl.png
Any help would be really appreciated. Thanks.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Herbalist wrote:Muting S/PDIF in alsamixer seemed to fix this problem as suggested in this thread https://bbs.archlinux.org/viewtopic.php?id=156502
How do I do that ?
http://es.tinypic.com/r/250nywj/8

SAP GUI slow down after installed Eastern Asian Language Package

Hello,
Have any idea what happened to SAP GUI after installed Eastern Asian Language Package on Windows XP ?
I am working on smartforms translations in SE63 and during entering the japanese or chinese text my working area is slowing down(problems with scrolling), like missing memory or sth?
How to overcome it?
Regards,
Mateusz.

There is a known performance problem with certain SAPGUI patches in certain constellations:
Note 1460669 - Performance problems in SAP GUI for Windows
You may try to install the newest patches or downgrade to a patch that does not have that problem.
Markus

TS3258 error 42404 after installing iTunes 10.6

I'm getting the above error after installation. Now itunes won't recognize my ipod. What do I do?

After installing itunes 10.6, system does not connect to itunes, it kepps on saying "Accessing itunes store".
I'd start with the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store

What I need to do after installing agent?

Similar Messages

Maybe you are looking for