What is active and what is inactive in FLASH CS5.5 AS3?

There is a link to an iOS page in adobe beta that tells you what works.
The problem is so many developers are asking the same questions over and over again.
I believe that your forums and documents fail to say things such as maps api not supported in CS5.5 even though we said it was going to be.
Native windows access is important and this has been overlooked as well.
The only real benefit from CS5 to CS5.5 is that you can access the camera properly.
Is Adobe/Apple going to fight because Apple hates the ease with which a developer can get an app into the store WITH FLASH?
I have tested many apps for research into my own.
The following terms and conditions stated in the developer program are false and should be REMOVED OR ENFORCED:
Apple states that any app with inaccurate data will not be accepted. I can name several apps quite easily that fail geolocation in different hemispheres as the math is wrong. Fishing by HuntFishTracker.com is a great example of this. This app also fails as when the data is loaded in large quantities the app fails as the lists get to big for it to handle. XCODE.
Another app that many pay for and should not is the Accuweather app as it shows incorrect data about moonphases which means that the geolocation is a failure.
How do I know? I used my maths and IT degrees and built an app to test against certain data. They fail. Therefore it can be assumed that of all the geolocation apps that only 10% may be accurate and the rest is because the punter believes what he sees is true.
Also, unless you are near traffic lights, then your maps reception and interactivity with a server may be false. You must get mobile broadband to ensure range. This should be built into the phone. It is a miniature modem that extends the phones wifi reception range as many functions rely on a combination of 3G and WI-FI.

How exactly would I do the slider with tweenlite? I got it and took a look, but I didn't see anything that would help me beyond where I am (remember I'm new to flash). Also, I know I don't really need more than one frame, but I'm OCD and feel the need to dedicate a frame to each video. I'm just weird like that. If it doesn't noticeably affect the project, ill leave it, but if it's bad programming, I'll remove it. Just let me know what you think.
Thanks again!

Similar Messages

Embedding and using external fonts in Flash CS5

I just upgraded to Flash CS5. Font embedding is entirely different than it was in CS4. I've been looking for examples online but none seem to show me a solution that matches what I need.
In the project I'm working on, code changes the font a text box uses based on region and language. To keep file size down I created separate swf files with the fonts embedded. That way I only download the font I need. The way I did this and the code I used in CS4 doesn't seem to work anymore. Can someone please point me to a tutorial on this.
Thanks

OK, maybe you can help me figure out what I'm doing wrong. Below is the code I'm using.
LOADING THE FONT
Font SWFs:
I'm trying something new with CS5. To create a swf with the font I need I'm creating a library symbol of the font with all the characters in it. Titled it "Verdana". I've also turned on Export for ActionScript and given the font a unique class name (VerdanaFont). Then of course publish the swf, name it Verdana.swf, and put it in the correct location. Does doing it this way automatically register the font?
The Loader code:
private function LoadFont()
var fontPath:String = "assets/fonts/Verdana.swf";
var fontLoader:Loader = new Loader();
fontLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, createTextBox);
fontLoader.load(new URLRequest(fontPath));
The TextBox code:
private function createTextBox()
var tf:TextFormat = new TextFormat;
tf.font = "Verdana";
tf.align = "left";
var textBox:TextField = new TextField;
textBox.embedFonts = true;
textBox.selectable = false;
textBox.htmlText = "This is test text";
textBox.setTextFormat(tf);
stage.addChild(textBox);

Replacing image and keeping existing action in Flash CS5.5

I'm updating an existing Flash swf file that was created using CS5.5. The only thing I have to do is replace the image used. When I import the new image it changes the action used with the existing image. How can I import the image I want to use AND keep the existing action that was used? My apologies if I'm using the wrong forum for this question. Thanks!

attach a screenshot that shows what you're doing when importing and describe the location of the code relative to the about to be replaced image.

SQLite Database and TLF Text in Flash CS5

I encountered the following problem when working with the built-in sqlite database and using TLF TextFields in Flash CS5
When I tried to use TLF TextFields alone, I don't face any probelem,
but when I start using a database connectivity code, the TLF TextFields placed on the stage are not shown, but instead, the SWF file is showing the built-in preloader with five dots looping.
I tried changing the default Linkage in ActionScript 3 Settings to Merge Mode, but in this case nothing is shown, not the textfields, neither the preloader.
I think the problem is related to loading the TLF Text Engine, but I couldn't figure out what to do.
The following is my code placed in first frame:
==========================================
import flash.data.SQLConnection;
import flash.events.SQLErrorEvent;
import flash.events.SQLEvent;
import flash.filesystem.File;
var conn:SQLConnection = new SQLConnection();
conn.addEventListener(SQLEvent.OPEN, openHandler);
conn.addEventListener(SQLErrorEvent.ERROR, errorHandler);
// The database file is in the application directory
var folder:File = File.applicationDirectory;
var dbFile:File = folder.resolvePath("DBSample.db");
conn.openAsync(dbFile);
function openHandler(event:SQLEvent):void
    trace("the database was created successfully");
function errorHandler(event:SQLErrorEvent):void
    trace("Error message:", event.error.message);
    trace("Details:", event.error.details);
stop();
==========================================
and I am using one TLF TextField on the stage for later use.
Publish Settings>> Player: AIR 2.6
and not to forget, when I test the file using Contol Panel >> Test in Air Debug Launcher (Desktop), the file is working correctly.
but when I open the generated SWF file, the problem appears.
I hope that I find some help
Thanks.

http://www.flashandmath.com/flashcs5/rsltip/

Flash CS5 ِAn error occurred opening file and WinRar The archive is either in unknown format or damaged

I have fla files and when I opened by flash cs5 11.5.1 it says "An error occurred opening file". I tried sure to make it rar or zip and repair it. When I opened by WinRar it says "The archive is either in unknown format or damaged"
Please Please Please Help ME !!!!! .. I have been done a lot of work on it .. I am so tired .. Please Help Me Please
Thank you so much

do you have a working swf?
if so, you can decompile it and recover some or all your work.
if not, are you able to rename the fla to a rar and then unrar it?

What is diff b/w active and inactive DCs

hi
please let me know what is diff between Active and Inactive DC's.
If possible send some FAQs on JDI
Thanks
-mmukesh

Hi Mukesh,
When you are developing somthing through JDI (NWDI), you will have inactive dc and active dc.
If you want to do some changes in code then you can do these changes through inactive dcs. Whatever changes you do in inactive DCs and until you check-in that activity. other developers cannot have those changes.
but, when you check-in your activity those changes will be visible to other developers who are working on the same DC but this updated code will not be reflected in active DC.
But when you activate that activity, those changes will be reflected in active dc and this active dc will be deployed on Development server.
In summary, inactive DCs contain intermidiate code which is not ready to deploy on Development server yet. This updated code is available in Active DC.
Hope now you are clear with Inactive and Active DCs.
Regards,
Bhavik

Why am I having less free memory? What is active and inactive memory?

Hi, I own a MBP penryn model. Right now, when I look in the activity monitor (or istat pro), it tells me that my free ram is 302mb, 56mb inactive, 816mb active, and 166mb wired. Why am I only having 300mb free if Im only using safari at the moment and not running anything else? Everytime I start up my notebook, the free space is around 1.70gb free at least. But why do I have that little bit of free space after a long time use?
Sorry if this is a newbie question, im really new to this.
Message was edited by: djvic87

About OS X Memory Management and Usage
Reading system memory usage in Activity Monitor
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.

I make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

On iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

I just upgraded my ipad OS and now my ipad is not picking up the 3G network. Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???

Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???
It was working fine up until I upgraded the OS which I hadn't done in many versions so the ipad was not working as well as it should. Now it is searching for the network.
.

Hello noodles074!
Let's get your device working again! It's possible that your device just needs to be reprovisioned on our network. Please go to Settings>General>Reset>Subscriber Services>Reprovision Account. This may take several minutes. After allowing about 5 minutes for completion, please power your iPad off and back on, and test it again. Let us know if this takes care of it!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

TS2756 I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do no

I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do now?

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to tether your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_tethering.html
How to Connect an iPad to an iPhone Via Bluetooth Tethering
http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
 Cheers, Tom

What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

HT4623 My FaceTime indicates an error occurred during activation and to try again. What does this mean?

My FaceTime indicates an error occurred during activation and to try again, what does this mean and what can be done to resolve this issue?

Try here > http://support.apple.com/kb/TS4268

TS3694 What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

Thank you for your response. However, I have done that plenty of times and each time I try to restore my phone, it extracts the software and then when it says restoring with the loading bar, an error message comes up saying an unknown error has occurred.

"iTunes could not connect to the iTunes Store. An unknown error occurred (-3212). Make sue your network connection is active and try again." What can I do to fix it?

Help! I'm getting the following error message:
"iTunes could not connect to the iTunes Store. An unknown error occurred (-3212). Make sue your network connection is active and try again."
I'm obviously connected to the internet since I'm typing this. What can I do to fix the problem? Thank you for your help!

Hello Buck
If you are having issues with the iTunes store, check out the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

What is active and what is inactive in FLASH CS5.5 AS3?

Similar Messages

Maybe you are looking for