What is Communication Manager?

if you now about that,plz give some information!
i need to know what is the job of communication manager, and what functions are needed to build it?

I'm sorry. with no context, I don't have any help for you.
We have "communication express", which is a unified client for our Messaging Server and Calendar Server.
I'm not familiar with "communication manager"

Similar Messages

  • How to migrate from BE6000 to Communications Manager

    Dear forum members,
    first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
    Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
    issues with our Cisco reseller (Deutsche Telekom/T-Systems).
    It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
    All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
    It took us (me and our reseller) over a year to set these things "right".
    Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
    Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
    I thought, "Hey, finally eveything works as expected..."
    I was wrong, so wrong...
    What happend? I tell you what happend...
    During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
    Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
    Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
    So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
    And that was the point when our communication stucked...
    Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
    The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
    Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
    Kind regards,
    René

    DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
    I assume you've already verified your server is supported under 3rd party spec guidelines???
    But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

  • What is ALERT Management.how to use it?

    what is ALERT Management. what is it's use.how to do ALERT Management?

    HI
    Alerts within XI give us a simple way to monitor only those errors that we want to and send alert messages to different people depending on the alert category.
    Alert configuration is used to have the system inform you of errors during message processing.
    By using the Alert Framework, central monitoring can be provided with all errors reported during message processing in ABAP and Java. This enables an improved reaction to such errors in both the ABAP runtime and the Java-based Adapter Engine. For this purpose, the Alert Framework is provided with rules based on certain events and on information from the header of the message protocol. These rules determine whether alerts are send or not.
    Alert Configuration:
    1) An Alert is a notification informing its recipients that a critical or very important situation has arisen. The
    situation is as severe that an action must be taken immediately in order to resolve the situation. The
    system recognizes the situation and sends the Alert.
    2) We use the Alert Configuration to have the system inform you of errors during message processing. we
    can receive the Alert by e-mail, fax, or SMS.
    3) To configure your Alerts, proceed as follows:
    a) Create the Alert Categories that we want to use in our Alert Rules.
    b) Create the Alert Rules in which we want to use our Alert Categories
    4) An Alert is an instance of an Alert Category
    5) Alert Categories can be defined by applications or customers using the Alert Category definition
    environment, which is accessed in Transaction Code ALRTCATDEF
    6) The Structure of Alert Category is defiened by the following
    a) Technical key (language-independent) for identification purposes
    b) Description (language-dependent)
    c) Classification
    d) Priority
    e) Maximum number of deliveries. (This applies to delivery to a destination other than the alert
    inbox.)
    f) Expiry time (in minutes) after which the alert is deleted
    g) Escalation recipient to whom the alert is sent if it is not confirmed by any of its recipients
    h) Tolerance time before escalation
    i) Short text, long text, and title
    The title is used as mail title, fax subject, and alert title in the inbox. The long text is used as
    mail/fax body and the long text view in the inbox. The short text is used for pager and SMS.
    j) Container for variable definition if variables are to be used in the texts, or for other application-
    specific attributes
    k) Subsequent activities in the form of URLs
    pleae refer the following links for furtehr infromation
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm -
    Alert
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts u2013 1
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts u2013 2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
    Alerts with variables from the messages payload (XI) - UPDATED -
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration by Micheal
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
    I hope at the end of this you may get some knowledge on Alerts.
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
    we configure to Adapter Engine).
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
    (This is Important)
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
    /people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
    Alerts with variables from the messages payload (XI) - UPDATED -
    Alert configuration
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    Calling alerts from UDF
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Email Alerts
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Alert Delivery
    /people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
    Transport the alerts
    http://help.sap.com/saphelp_nw04/helpdata/en/a6/5a94413aaad960e10000000a1550b0/frameset.htm
    XI: Alerts - Step by step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Triggering by Calling a Function Module Directly.
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Alerts with variables from the messages payload (XI) u2013 UPDATED
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Simple Steps to Get Descriptive Alerts from BPM in XI
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
    Triggering XI Alerts from a User Defined Function
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Throwing Smart Exceptions in XI Graphical Mapping
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    cheers
    reward poins if found useful

  • Bank Communication Management - Incoming messages from Banks

    Hi,
    We are using Bank communication management. When we send our ACH and Wire files to the bank, the bank sends two confirmations: 1. First confirmation says that the file is received. 2. Second confirmation sends the total number of items and total amount in the payment file.
    I have done the necessary configuration in BCM in the step shown below:
    Financial Supply Chain Management ® Bank Communication Management ® Payment Status Management ® Map External Status to Internal Status
    How do I update this in the payment monitor (T-CODE - BNK_MONI)?
    SAP says
    You must connect the XI system to the ERP system. The interface Collective Payment Order Notification must be set up. What is this interface 'Collective payment order notification' and where should I set it up?
    Any help in this regard is greatly appreciated.
    Kalyan

    Hi Ankish,
    As mentioned by Kalyan above (check suggestions from SAP in his comment), you should use the interface Collective Payment Order Notification given by SAP in ESR (Enterprise Service Repository) SAP APPL (SAP APPL 6.05). If your PI environment doesnot have it then you need to request yuor basis to download this from SAP.
    After you download the ESR , you can find the standard Service interface called "CollectivePaymentOrderNotification_In" under Namespace http://sap.com/xi/APPL/Global2 .
    Now once you have this interface downloaded,  create a new message mapping using the message Type "CollectivePaymentOrderNotification_async" as Target,  and your message  from BANK or SWIFT (uploaded into PI as external definition) as source. Map the required fields , mainly map the external status code from BANK to ExecutionStatusCode field. Also map the required header fields.
    Once you create the new mapping , create required Integration builder objects and you are all set.
    The CollectivePaymentOrderNotification interface is proxy in ECC which has required methods to update the BCM with the status.
    Also please check below links for more information.
    http://help.sap.com/esoa_erp2005_ehp2/helpdata/en/46/802b59e186429ee10000000a1553f7/content.htm
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/22/e-payment-a-customized-solution-other-than-sap-integration-package-swift-part-3-receive-from-bank-push-to-sap-bcm
    Regards,
    Suresh

  • SAP Bank Communications Management

    Hi
    I wonder if anyone can help?  We are currently exploring with our bank using their facility for transmitting Payment Files directly to them through a secure transfer and also retrieving Statements, Forecasts, Acknowledgments and Rejections.  The Payments files, Statements and Forecasts will use standard formats such as MT103/940 etc.
    What we want to achieve is integrating with SAP using some standard functionality that will allow the Cash Management team an easy way of monitoring and controlling the payments.
    Can anyone clarify whether the Bank Communication Management tool can be used for the above scenario or will it only allow you to use it if you have a direct connection to SWIFTnet??
    Thanks in advance
    Adam

    Adam,
    You are right. BCM is the tool. What  BCM can do is:
    1. Batch payment runs into batches as per your requirement. For example you run say F110 10 times a day for EFT. Based on the BCM rules you can combine these 10 Payments runs into one or more batches
    2. After having batched the payments, you can view them in BCM payment monitor.  with the current status. From here you can drill down to the payment run and view the paid items.
    3. After you receive ACK/NACK (Acknowledgement or rejection notices) message from SWIFT you can update this monitor and your Treasury/Cash management people can view this status. You can also set 'alerts' in case of rejection so that the responsible person can get an email and he/she can take immediate action.
    4. Treasury/Cash management can also approve the payment, depending on cash availability stop the payment and can release it the next day once they have money. By this you are not reversing the payment, but it is just kept pending in BCM.
    Kalyan

  • What is Change Management in Sharepoint?

    What is Change Management in Sharepoint? is there any best practices to follow? please let me know any Video tutorials that explains this concept. any useful Links are much appreciated.

    Hi Raghav1544,
    According to your description, my understanding is that you want to learn about Change Mangement concept in SharePoint.
    This is a request flow to do custom change to SharePoint to achieve some requirement.
    Here are some detailed articles for your reference:
    SharePoint 2013: Build a Change Management Request without code
    Eight steps to successful SharePoint change management
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • CRM 7.0 - Communication Management Software - CTI

    Hi,
    We are in process of configuring Contact Center Simulator.
    The fact is that we don't have JAVA stack on CRM 7.0 system, rather we are using different system for JAVA stack.
    We have successfully done with RFC connection in CRM 7.0 pointing to JAVA stack system and other required config settings.
    When user click 'Ready' button from UI, it gives error 'Communication management software system is not configured'.
    Does any body has experenced this or did I missed out any step?
    Regards,
    Nilesh P

    Hi Nilesh,
    Here are a few things to check:
    1. Look at the ICI trace log and see what kind of message is being returned
    2. Double-check your toolbar configuration - this often gets overlooked - you need a toolbar for voice configured
    3. Check that the system where the Java stack resides can "see" and connect to your CRM 7.0 system - if there is a firewall between the two or if there is some other network reason that communication might be getting blocked. look at the ICI trace log and see what url is being passed in the subscribe command, then put that URL into a web browser on the java server to verify that it can call back to the CRM system
    Hope this helps. I have done that same thing before so I know it works.
    Sincerely,
    Glenn
    Glenn Abel
    Covington Creative
    www.covingtoncreative.com

  • Broken Cisco Unity / Unified Communications Manager association

    We have several Cisco Unity Connection users with the following status in their profiles:
    "This user's association to the co-resident Cisco Unified Communications Manager user has been broken.
    Please Click Here to reassociate the orphaned user."
    Clicking on the reassociation button does not show any of the users with broken associations, just a few resource users.
    Is there any way to reassociate these users with CUCM without having to delete them in Unity Connection along with their mailboxes?

    These are the steps I took to resolve the issue. I was particularly concerned about users losing saved messages in their voicemail. The posted solution did not give much detail on what to do.
    1) Create a new user in CUCM. For example, I have a user called 'John Doe' in the system. I created a new one called 'John Doe2'.
    2) After creating the user I associated 'John Doe2' to the phone in use by 'John Doe'. Then I set the Primary Extension as needed for that user. Hit the 'Save' button and verify that the 'Create Cisco Unity User' option shows up in the drop-down box in the right hand corner.
    3) Log into Cisco Unity Connection Administration, and select 'John Doe'. Click on the link to re-associate and select 'John Doe2'. This links the Unity user to the CUCM user.
    4) Log back into CUCM and select 'John Doe' from the user list. Remove all device associations from the user. Hit Save, then delete the user.
    5) Select 'John Doe2' and rename the user as 'John Doe'.
    These steps fixed my problem. I had to do it for all the users whose association was broken. One note to make is that the voicemail PIN is automatically reset to the default I believe, which is 0000. Other than that voicemail continues to work normally and users don't have to redo their greetings and such.

  • Unable to invoke SendMessage method of outbound communications manager

    i have configured a communication profile, and tried to send a mail using Outbound Comm Manger.
    When i use F9 i am able to send the mail. But wheni try to automate the processby workflows i get the following error.
    "Unable to invoke SendMessage method of outbound communications manager"
    I have used"SendMessage" method of outbound communications manager.
    CommProfile - Literal - MyProfile
    MsgTo List - Literal Value
    is there any extra parameters have to give in workflow??
    Kindly help me on this. What are the extra parameters that i need to give in the Internet SMTP/POP3 Server PARAMETER in Comm Profiles.
    Thanks in Advance

    A.Pancholi wrote:
    However, if you shutdown the OS and it just kills the JVM process, it won't happen. Is that correct?
    No, it should still run. It's what shutdown hooks are for, cleaning up, eg: database connections, in the case of unexpected shutdowns. Not foolproof, by any means, though. Pulling the power cord won't run them, for obvious reasons
    So actually, it probably is what the OP is afterThen we could be the problem the method is not getting invoked. Did we do something wrong: We show you what we have done.
    Runtime.getRuntime().addShutdownHook(new Thread() {
    public void run() {
    callingMyMethod();
    Looks fine to me. How are you stopping the JVM?

  • What is change management?

    Hi,
    What is change management?
    Regards
    Raje

    Hi,
    Change management is a structured and strategic approach to initiate and manage the change process in the organization structure and culture as well as the individuals/teams behaviour and atitude towards the change transition in the field of the business processes, technology implementation or any other policies of an enterprise.
    The change management process involves the task of managing change using a ethical and professional approach with an appropriate knowledge and common sense with a control mechanism and layout of a well planned organizational communication system. On the Management part , It is imperative to estimate what impact a change will likely have on the employee behaviour patterns/motivation, work processes, technological requirements and finances. Management strategizes the change process by assessing the reactions of the human resource to seek their co-operation and accesses the financial as well as technology resources so as to make appropriate arrangements such that the change process is implemented as per the vision of the enterprise and can be appropriately monitored for effectiveness and adjusted, if and where necessary.
    There are several change management models that the enterprises follow while undertaking the Change Management process depending upon the ground realities and the organizational culture of the enterprise seeking the change process. One of such models popularly known as ADKAR Model describes five factors for the change to be realized successfully on an individual level that are as follows :
    Creating Awareness why the change is needed
    Inculcating Desire to co-operate and participate in the change process
    Providing and collating Knowledge to guide the change process
    Developing Ability and appropriate skills to drive the change process
    Formulating Reinforcement strategy and plans to sustain the change process
    The ADKAR model for the Individual Change management was developed by ProSci with the co-operation from many world wide organizations.
    Change Management refers to the process of continuous improvement,where Organizational Development is totally based on Individual development. Being aware of the present situations and continuosly reviewing them for the betterment of people(which includes Employees, employers, clients, customer and also their families)
    However to start this process and to make it a part of our lives is the challenge. This is what takes most time, since people involved in this have busy schedules - be it home or office and to take time off for 'CHANGING" is not considered worthwhile.
    Some people would like to believe that they are already in that state and hence would want to review it at all. For them to understand that "Always reviewing the present and analysing its effects on the future" is what continuous improvement is all about.
    To initiate the process of CHANGE , one needs to be structured and patient. Expecting miracles overnite is a myth. Its a gradual process. The point most important is that "Business Goals" and "individual Goals" need to kept in focus all the time. No way can performance be discounted.
    [SAP Change Management|http://www.sap.com/services/education/consultingservices/changemanagement.epx]

  • What is demand management .

    What is demand management , can any body send me configuration document for Demand Management

    Rakesh,
    I guess you must have overlooked the rules of engagement for this forum. It is customary for questioners to first perform basic research before posting any questions.
    First, search in the forums (search box in the upper right of this page). FYI The question you raised has been discussed dozens of times. In addition to forum postings, there are numerous articles available for free in the SAP community network.
    Next, check online help. This help is generic, and not generally specific to a particular industry:
    http://help.sap.com
    Demand Management in the Supply Chain:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f93ad43b711d189410000e829fbbd/frameset.htm
    Next, look for generic solutions solutions in Best Practices. Basic index at
    http://help.sap.com/saap/sap_bp/BL_IN/html/Content_Library_BL_EN_IN.htm
    Next look for industry specific solutions in Best Practices:
    http://help.sap.com/content/bestpractices/industry/index.htm
    If you are experiencing a problem, or you believe that SAP is not working per the online help, you can then search OSS notes.
    http://service.sap.com/notes
    Next search in one of the standard online search engines (such as Google).
    Only after you have performed all of these tasks, and studied all of the online help that is supplied for free by SAP, then consider posting a question to these forums.
    If you are unwilling or unable to perform such research, then you should probably engage a consultant to assist you. All consultants use searches to assist them in designing and executing solutions. If you intend to one day become a consultant, you would be wise to cultivate this skill.
    Best Regards & Good luck,
    DB49

  • Communications Manager Profile Locations

    We have Communications Manager 6.1(2) installed and make extensive use of extension mobility. Our manager is not a big fan of extension mobility. We have a lot of folks who travel between sites. While they love the service, we have on significant management issue (what our manager is calling out)... specifically, we don't know of anyway to locate the physical phone (MAC address) that a specific profile may be logged into.
    Is there a way, if we know the profile name (which is the employee number), to locate the physical phone the user is currently logged into? The request for this information isn't always coming from the profile owner (we could just ask them to turn the phone over and read us the MAC).
    Is there any historical data available (profile ABC was logged into SEP001FCAE929C3 on this date, was logged into SEP001FCAE92BCF on this date, etc.)?
    Thanks for your input!

    in the CUCM admin pages:
    go to DEVICE-->PHONE.
    in the right top you will see:
    Actively logged in device reportm hit GO
    leave the search blank and you will see all phsycical devices and the profile logged into it.
    I am not aware of this being available on historic basis

  • E52 Advanced Communication Manager Lost!

    Hello Everyone
    Although I am a very very happy person with my E52, I had to reset my phone [using the *#7370# command] ](to refresh it after 2 yrs of continuous usage) and format my microsd (due to file corruption) in order to fix some problems I created on the phone.
    Everything is working excellent again , but I have completely lost the Advanced Communication Manager programme!
    From what I read it is built in the firmware so how can it be lost and how do I get it back?
    I have downloaded the programme from Nokia but it says it is limited version (???)
    Any ideas anyone
    Thank you all

    This resource confirms that Advanced Communication Manager was installed upon memory card in case of E52:http://melonmobile.com/CompanyMenu/News.aspx?news_id=43
    Did you download this version http://store.ovi.com/content/60614 rather than this one http://store.ovi.com/content/1353 ?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Spot the Community Manager Competition - CLUES Thr...

    Hi everyone
    This is our first clue in the Spot the Community Manager competition. 
    We’ll start with an easy one…
    If you are on the front page of the community and click on the broadband tag you will get a list of posts that have been tagged with the word broadband.  Find the post about broadband dropping when the user switches on their TV… you might spot me there!  This is what you are looking for:
    Remember to copy and paste the thread URL and send to me in a private message.
    Full details and terms and conditions for the competition can be found here
    Good Luck!
    Kerry
    Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    Hi Everyone
    It's our last clue today - make sure you use all the clues to find the pics to enter the competition!
    In Clue 2 we mentioned sticky threads on the Vision board.  There are sticky threads on every board – worth checking them out as they have help and advice on solving the most common queries we see.
    For the final clue we will venture into the Phones board and find out what to do if you have trouble with your BT phone – check out the sticky threads here and you’ll find the last pic. 
    All the pictures will be removed at 10pm this evening so you need to look for them before then.
    Remember to copy and paste the 5 thread URLs for every picture and send to me in a private message
    Full details and terms and conditions for the competition can be found here
    Happy Spotting!
    Kerry
    Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Cisco Unified Communications Manager AXL servers option appear deactivated in cisco unity connection

    I have a  problem, the tab with the Cisco Unified Communications Manager AXL servers option  is disabled or appear disabled in CUC. any idea what might be going on, I checked  that the service relates to AXL is on and running in CUCM and CUC. My version is CUCM and CUC BE 7.1

    This is disabled on BE 5000 servers because CUCM and CXN are coresident on the same OS. AXL integration is pre-built and required. This is only enabled for an administrator to configure/edit on standalone CXN installs.
    Please remember to rate helpful responses and identify helpful or correct answers.

Maybe you are looking for