What is current best practice for backing up a hard disc?

With the availability of various cloud applications, I would like to know if backing up an hard disc is now best done to the cloud? For example, should you buy space in Amazon.com, or somewhere else on the Internet, and then backup your hard disc to that space? Could you backup an entire harddisc to iCloud? Your knowledge and experience is greatly appreciated. Thank you.

iCloud doesn't provide storage except for pictures
and your music, and only under limited circumstances.
Merchant online backup services such as Carbonite
and others exist for this reason. And you can sync
your files with/to Dropbox. Many users keep a local
copy of their files on  Time Machine or other hard
drives in addition to remote backups (in case of a
fire or other event compromising the local solution).
Backup software or cloning programs are useful in
all the above. You have to work at backup a bit -
it's like insurance, a bit of expense now to save a
lot of heartache later.Good to see you're determined
to forestall potential disaster - too many lack it.
Good luck, Tom

Similar Messages

What are the best practices for backing up SAP B1?

Right now, we are using a nightly tape back up. Is this sufficient? Or are there other, better options?
Thank you!
John Sefton

It is sufficient,as you would have default SBO-Backup utility
whcih can be automatted.
In addition, you can even take a manual backup from the back end.

What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

My final data table contains a two key columns unique key constraint. I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
(not unique) in the daily capture table). I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). Currently, what I do is to select * into a #temp table from the join
of daily capture and final data tables on these two key columns. Then I delete the rows in the daily capture table which match the #temp table. Then I insert the remaining rows from daily capture into the final data table.
Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table? How would this look?
What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
Rich P

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key. You need to fix this error. What ETL tool do you use?
>> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
MERGE statement; Google it. And do not use temp tables.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Best practice for backing bean population? (also, ActionListener RANT)

Hello,
I am about 3/4 of the way through development of a small to medium size JSF application. Sometimes I really like JSF, but much of the time I am left puzzled or frustrated for hours trying to find workarounds to JSF's bugs/glitches and design flaws.
For example, early on, I was impressed with how easily it was to invoke a method from a page using an actionlistener. Now that I'm actually building things with JSF, the actionlistener funtionality still seems cool, but incredibly half baked. I find myself using request parameters LIKE CRAZY to work around the fact that JSF doesnt support passing parameters directly to backing bean methods. This feels awkward and wrong considering the fact that JSF is intended to abstract the HTTP underpinnings. To add insult to injury, I often have to iterate through ALL of the request parameters looking for one that has an id with an ending matching my desired property name (since JSF appends it's own crap to the beginning). I don't like doing things in a hacky way. This seems very hacky, and I feel dirty doing it.
So, my first question is, what is the best practice for populating backing beans??? How do others accomplish this. I can think of several other approaches, but none feel less hacky.
Second, are there plans in the next spec (please say there are) to allow parameters to be passed to backing bean methods? If not, WHY THE HECK NOT?
Even though JSF expert group people have been conspicuously absent from this forum of late, I'd really appreciate responses from you as well.
Thank you for your thoughts.

Hi BrownBear,
I've been using JSF for about 6 months now and I'd be glade to help as much as I can.
Concerning parameters, I'm not sure what your issue is but I use the f:param tag to pass them. If you could post an example of what you are trying to do, I could see exactly what your issue is. Maybe the f:param can't help you.
As for best practice for populating backing beans, I personaly try to let JSF do as much as possible. For example, if I have a backing bean with five properties, I make sure that they all are on the JSP page the bean serves. If one of the property is just there as an Id like, lets say, a Person ID (DB row key), then I put it on my JSP page as a hidden input field. I do the same with the properties that only for display, if I want them to be back in my bean when request comesback.
Hope this help some how. Please, feel free to ask specific questions related to your specific problem and I monitor this post and trnasfer to you the ;little JSF experience I have.
I'm pretty happy with JSF as it is but it sure needs improvements. :) What the heck, it's version 1.01 after all, and the next release should be a great one with the integration of JSTL.
Cheers

Current best practice for Time service settings for Hyper-V 2012 R2 Host and guest OS's

I am trying to find out what the current best practice is for Time service settings in a Hyper-V 2012 environment. I find conflicting information. Can anyone point me in the right direction. I have found some different sources (links below) but again the
are not consistent. Thanks
http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/11/19/time-synchronization-in-hyper-v.aspx
http://technet.microsoft.com/en-us/library/virtual_active_directory_domain_controller_virtualization_hyperv(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/12709.time-services-for-a-domain-controller-on-hyper-v.aspx

From the first link provided by Brian, it does state that the time service should be off, but then the update changes that statement. Still best to rely on the first link in the OP - it was written by the guy that has been responsible for much of what
gets coded into Hyper-V, starting from before there ever was a Hyper-V. I'd say that's a pretty reliable source.
Time service
For virtual machines that are configured as domain controllers, it is recommended that you disable time synchronization between the host system and guest operating system acting as a domain controller. This enables your guest domain controller to synchronize
time from the domain hierarchy.
To disable the Hyper-V time synchronization provider, shut down the VM and clear the Time synchronization check box under Integration Services.
Note
This guidance has been recently updated to reflect the current recommendation to synchronize time for the guest domain controller from only the domain hierarchy, rather than the previous recommendation to partially disable time synchronization between the
host system and guest domain controller.
. : | : . : | : . tim

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

What is the Best practice for ceramic industry?

Dear All;
i would like to ask two questions:
1- which manufacturing category (process or discrete) fit ceramic industry?
2- what is the Best practice for ceramic industry?
please note from the below link
[https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000409682008E ]
i recognized that ceramic industry is under category called building material which in turn under mill product and mining
but there is no best practices for building material or even mill product and only fabricated meta and mining best practices is available.
thanks in advance

Hi,
I understand that you refer to production of ceramic tiles. The solution for PP was process, with these setps: raw materials preparation (glazes and frits), dry pressing (I don't know extrusion process), glazing, firing (single fire), sorting and packing. In Spain, usually are All-in-one solutions (R/3 o ECC solutions). Perhaps the production of decors have fast firing and additional processes.
In my opinion, the curiosity is in batch determination in SD, that you must determine in sales order because builders want that the order will be homogeneus in tone and caliber, and he/she can split the order in diferents deliveries. You must think that batch is tone (diferents colours in firing and so on) and in caliber.
I hope this helps you
Regards,
Eduardo

What is the best practice for creating primary key on fact table?

what is the best practice for primary key on fact table?
1. Using composite key
2. Create a surrogate key
3. No primary key
In document, i can only find "From a modeling standpoint, the primary key of the fact table is usually a composite key that is made up of all of its foreign keys."
http://download.oracle.com/docs/cd/E11882_01/server.112/e16579/logical.htm#i1006423
I also found a relevant thread states that primary key on fact table is necessary.
Primary Key on Fact Table.
But, if no business requires the uniqueness of the records and there is no materilized view, do we still need primary key? is there any other bad affect if there is no primary key on fact table? and any benifits from not creating primary key?

Well, natural combination of dimensions connected to the fact would be a natural primary key and it would be composite.
Having an artificial PK might simplify things a bit.
Having no PK leads to a major mess. Fact should represent a business transaction, or some general event. If you're loading data you want to be able to identify the records that are processed. Also without PK if you forget to make an unique key the access to this fact table will be slow. Plus, having no PK will mean that if you want to used different tools, like Data Modeller in Jbuilder or OWB insert / update functionality it won't function, since there's no PK. Defining a PK for every table is a good practice. Not defining PK is asking for a load of problems, from performance to functionality and data quality.
Edited by: Cortanamo on 16.12.2010 07:12

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

What is the best app for backing up my mac. I do publication work and need to save my work?

what is the best app for backing up my mac. I do publication work and need to save my work?

My answer does not have the black Apple logo but the hardearned black belt of (bad) experience.
There is one problem with TimeMachine. It can get corrupted out of the blue with no warning and it will not want to restore correctly (as an added "bonus" you get to find this out the "hard" way, when you need it most). Plus it takes ages for the data to be copied back, sometimes days. Haven't tried my 600gb backup on Mavericks but Mountain Lion had this knack of breaking Timemachine after a couple of months.
To back up my entire server is use SuperDuper. It mirrors the drive to an external one (usb for example) The cool thing is you can use that usb drive and start the OS X from it (by holding Alt when you hear the boot chime).
This way you have a working copy of your entire machine. You can even go to another mac and boot it from there. I literally ran the OS X Server in my company from a usb drive on an old MacBook Pro until i got around to fix the problems with the actual server machine.
This has saved me twice already as the Hitachi drives Apple uses, tend to die like clockwork after 4000-5000 hours of use with no warning.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
PS. As a sidenote... SSDs are more reliable than a normal HDD (not to mention faster) I can't stress this enough, my Server is on two SSDs now. I can't tell you how stress free the setup is, it doesn't feel like a computer but more like a router, it just works... forever. After two years with SSDs my server has had two days of downtime and their health is at 97%, they will literally last 100 years with normal use. I'd go so far as to recommend you buy an SSD and move your old HDD to an external enclosure and use that as a usb backup. (for SSDs i use Plextor / Lite-On M3s (older) or the M6s (newer))

What are the best practices for generating an EPS logo from InDesign?

Our costomer is running into technical issues with the logo we sent them, which was exported from Indesign. Images were not embedded and fonts missing. I was able to embed the images and fonts. However, we DO NOT want them to be able to make any text changes. So after exporting an eps, I opened the file in Adobe Illustrator and made all the text outlines. I hope this works. But I just wanted to post the question on what are the best practices for doing this?
The client needs the logo with transparent background, images emebdded and type in outlines. Also, they need some space around the text. When I exported the eps, the file is right up on the edge of the type.

It sounds like you are pretty far from "best practice" with regard to logo design and delivery.
These days, the very use of the EPS format should be considered bad practice, and some other terms in your post, (i.e., 'images,' 'missing fonts'), make it sound like there is not a seasoned logo designer involved.
That said, you probably already got the advice you need to get out of the immediate jam. However, without proper logo design, you and the client will soon be facing other problems. You should be delivering a 100% vector graphic in single-color (black) and corporate-color(s) versions, with no live font data, that has been test-scaled to very small and very large sizes; ensuring it will work at postage-stamp size and on the side of a truck or building, with specific spot color(s) and proportions that will enable it to be offset printed, embroidered and screen-printed on apparel, and cut into signage materials and decals.

What is the best practice for AppleScript deployment on several machines?

Hi,
I am developing some AppleScripts for my colleagues at work and I don't want to visit each of them to deploy my AppleScript on their Macs.
So, what is the best practice for AppleScript deployment on several machines?
Is there an installer created by the Automator available?
I would like to have something like an App to run which puts all my AppleScript relevant files into the right place onto a destination Mac.
Thanks in advance.
Regards,

There's really no 'right place' to put applescripts. folder action scripts nees to go in ~/Library/Scripts/Folder Action Scripts (or /Library/Scripts/Folder Action Scripts), anything you want to appear in the script menu needs to go in ~/Library/Scripts (or /Library/Scripts), script applications should probably go in the Applications folder, but otherwise scripts can be placed anywhere. conventional places to put them are in ~/Library/Scripts or in a subfolder of ~/Library/Application Support if they are run by an application. The more important issue is to make sure you generalize the scripts: use the path to command to get local paths rather than hard-coding them in, make sure you test to make sure applications or unic executables you call are present ont he machine, use script bundles rather tna scripts if you scripts have private resources.
You can write a quick installer script if you want to make sure scripts go where you want them. Skeleton verion looks like this:
set scriptsFolder to path to scripts folder from user domain
set scriptsToExport to path to resource "xxx.scpt" in directory "yyy"
tell application "Finder"
duplicate scriptsToExport to scriptsFolder with replacing
end tell
say "Scripts are installed"
save this as a script application, then open the application pacckage and create a folder called "yyy" in the resources folder and copy your script "xxx.scpt" into it. other people can run the app to install the script.

What are the best practice for CQ5.5 configuration?

Hello,
What are the best practice for CQ5.5 configuration which handle for High availability.
Last time I had a issues on server when I was uploaded 2 GB of DAM and then after that the server is not able to start and always getting error regarding Tar Persistance.
So kindly request you to please let me know what are the best apache felix configuration.
Thanks in advance...
Regards,
Satish

Hi,
A DAM upload, regardless of the size of the assets, never should result in TarPM problems, unless you run into an OOM, which left the repository in an unclean state. So if you regularly do DAM uploads of that size, you should check the Garbage Collection logs and probably adjust the heapsize if necessary. You might want to limit the number of concurrent running workflows to keep the memory consumption a bit lower.
To your question: HA in a traditional sense you cannot achieve with a single box, even with optimized settings. In an author usecase you would need clustering.
Jörg

What is the best practice for creating master pages and styles with translated text?

I format translated text all the time for my company. I want to create a set of master pages and styles for each language and then import those styles into future translated documents. That way, the formatting can be done quickly and easily.
What are the best practices for doing this? As a company this has been tried in the past, but without success. I'd like to know what other people are doing in this regard.
Thank you!

I create a master template that is usually void of content, with the exception I define as many of the paragraph styles I believe can/will be used with examples of their use in the body of the document--a style guide for that client. When beginning a new document for that client, I import those styles from the paragraph styles panel.
Exception to this is when in a rush I begin documentation first, then begin new work. Then in the new work, I still pull in those defined paragraph and or object styles via their panels into the new work.
There are times I need new styles. If they have broader applicability than a one-off instance or publication, then I open the style template for that client and import that style(s) from the publication containing the new style(s) and create example paragraphs and usage instructions.
Take care, Mike

What is the best practice for Enumeration for ADF?

Dear All,
What is the best practice for Enumeration for ADF?
I need to add enumeration to my application. ex: Gender, Marital Status.
How to provide? Custom Declarative Components or are there any other way?
Thank you.
Erdenebayar

Hi ?
How to create Static VO and assign static values for the fields?
if you can, then decide the matter.
thank you
Edited by: Luuya on Mar 23, 2011 1:34 AM

What is current best practice for backing up a hard disc?

Similar Messages

Maybe you are looking for