What is "Data Type" in Custom Script of Requirement

I want to create a custom script in "Requirement" of Applications.
It is different from "Detection Method", These is "Data Type" in The custom script of "Requirement"
I know how to create script in "Detection Method"！
But I don't know what is "date type" in "Requirement" , how does it work with script,
how to return the result of wscript.echo

You can use the Wscript.Echo result to check the requirement. The Data Type is only used to specify if the output is something like a String or Integer. Based on the type you just got some different options to check.
For more information see:
http://technet.microsoft.com/en-us/library/gg682048.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

[svn] 1455: add sql date types and custom serialization tests

Revision: 1455
Author: [email protected]
Date: 2008-04-29 11:56:59 -0700 (Tue, 29 Apr 2008)
Log Message:
add sql date types and custom serialization tests
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/DateTy pesTest.mxml
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/MyFile Ref.as
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/Proper tyProxyTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/SQLDat eTypesTest.mxml

Congrats to Shanky and Durval!
SQL Server General and Database Engine Technical Guru - June 2014
Shanky
SQL Server: What does Column Compressed Page Count Value Signify
in DMV Sys.dm_db_index_physical_stats ?
DB: "Interesting and detailed"
DRC: "• This is a good article and provides details of each and every step and the output with explanation. Very well formed and great information. • We can modify the create table query with “DEFAULT VALUES". CREATE TABLE [dbo].[INDEXCOMPRESSION](
[C1] [int] IDENTITY(1,1) NOT NULL, [C2] [char](50) NULL DEFAULT 'DEFAULT TEST DATA' ) ON [PRIMARY]"
GO: "Very informative and well formed article as Said says.. Thanks for that great ressource. "
Durval Ramos
How to get row counts for all Tables
GO: "As usual Durva has one of the best articles about SQL Server General and Database Engine articles! Thanks, buddy!" "
Jinchun Chen: "Another great tip!"
PT: "Nice tip"
Ed Price: "Good topic, formatting, and use of images. This would be far better if the examples didn't require the black bars in the images. So it would be better to scrub the data before taking the screenshots. Still a good article. Thank you!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

What are data types that can be stored on TemSe?

What are data types that can be stored on TemSe(Storage for Temporary Sequential Data)?
Moderator message: please search for available information/documentation.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Sep 18, 2011 10:04 PM

Hi
SAP Library: TemSe Data Store:
There are the following TemSe objects, among others:
·        Spool requests (TemSe Name: Spool....)
·        Job logs (TemSe Name: JOBLG...)
·        Objects from other applications, such as Human Resources (TemSe Name: HR)
·        An object whose name begins with KONS; this is object is constantly used by report RSPO1043 and should never be deleted (SAP Note 98065)
Sandra

A new version of the data type is present than one required

Hi Experts,
I am getting a short dump saying "A new version of the data type is present than one required".
The data type in my case is the Transfer structure for 2LIS_02_SCL. I am getting this short dump whenever i try to change the transfer rules.
I tried activating and deactivating the transfer and update rules but to no avail. Kindly advice.
Thanks in advance.

SAP Note 1157796 resolved the issue.

How to fetch data into my custom script configured in qc02 transaction

Hi All,
I configured the custom SAP-Script in place of standard script name in QC02 tcode.In my requirement when I execute QC22
transaction the custom script will be triggered along with some data based on material number,batch number and plant.I need to fetch QALS-KTEXTMAT , QALS-CHARG, MCH1-HSDAT and MCH1-VFDAT.Please help me how to fetch this data.Any Enahancement need to use or any spot is there Please specify.
Thanks in advance.
Regards,
Satya.
Edited by: satyareddygade on Sep 8, 2011 2:13 PM

Hi Satya,
Try like this in your Script window text element.
/: PERFORM FETCH_KTEXTMAT IN PROGRAM <Z Subroutine Pool program>
/: USING &QALS-PRUEFLOS&
/: CHANGING &GV_KTEXTMAT&
/: ENDPERFORM
in Z Subroutine Pool program
FORM fetch_ktextmat TABLES intab STRUCTURE itcsy
                            outtab STRUCTURE itcsy.
DATA:
    lv_prueflos TYPE qals-prueflos,
    lv_ktextmat TYPE qals-ktextmat.
*---Get Inspection Lot Number
READ TABLE intab WITH KEY 'QALS-PRUEFLOS'.
CHECK sy-subrc = 0.
lv_prueflos = intab-value.
SELECT SINGLE ktextmat FROM qals INTO lv_ktextmat WHERE prueflos EQ lv_prueflos.
outtab-value = lv_ktextmat.
MODIFY outtab FROM outtab TRANSPORTING value WHERE
name = 'GV_KTEXTMAT'.
CLEAR : intab,outtab.
ENDFORM.                    "FETCH_KTEXTMAT
/: PERFORM FETCH_HSDAT IN PROGRAM <Z Subroutine Pool program>
/: USING &*VBDPL-MATNR&
/: USING &VBDPL-CHARG&
/: CHANGING &GV_HSDAT&
FORM fetch_hsdat TABLES intab STRUCTURE itcsy
                            outtab STRUCTURE itcsy.
DATA:
    lv_matnr TYPE vbdpl-matnr,
    lv_charg TYPE vbdpl-charg,
    lv_hsdat TYPE mch1-hsdat.
*---Get Material Number
READ TABLE intab WITH KEY '*VBDPL-MATNR'.
CHECK sy-subrc = 0.
lv_matnr = intab-value.
*---Get Batch Number
READ TABLE intab WITH KEY 'VBDPL-CHARG'.
CHECK sy-subrc = 0.
lv_charg = intab-value.
SELECT SINGLE hsdat FROM mch1 INTO lv_hsdat WHERE matnr EQ lv_matnr
                                                AND charg EQ lv_charg.
outtab-value = lv_hsdat.
MODIFY outtab FROM outtab TRANSPORTING value WHERE
name = 'GV_HSDAT'.
CLEAR : intab,outtab.
ENDFORM.                    "FETCH_HSDAT
Use the following program symbols where you want to print.
&GV_KTEXTMAT& &QALS-CHARG& &GV_HSDAT& and &MCH1-VFDAT&
Regards,
Surya.

What the data type of this variant? (in the following)

What's the datatype of the following variant (use probe and indicator):
value -> 1356.00
I want to tranfer it to numerical data. When I tranfer it using "variant to data" function (the datatype used is string or numerical), An error occured:
ERROR 91 occured at Variant to Data. The data type is not compatible with the data type wired to the type input."
Thank you very much!

You can investigate any Variant by using the 'Variant Probe' for download from LAVA.
It will tell you what the actual contents of the Variant were.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Input data type of Matlab script node

Hi,
I have 1D array of complex number in single precision.
Matlab script node is used to import data into Matlab and do some data processing, and then export.
Data type of input is currently double precision.
How to re-define this input data type of the Matlab script node?
Thanks,

Right, arrays of singles are not supported. See Comparison of MathScript RT Module and the MATLAB® Software Data Types in LabVIEW
As for memory usage, Profiling the VI should let you know how much memory Labview uses when running your code. Communication with MATLAB® is done through ActiveX, and I'm actually not 100% sure whether it will reflect memory usage from script execution. I think it'll be simple enough to profile your VI with and without the MATLAB Script node and note the memory usage difference...
Misha

Error: A newer version of data type was found than one required

Hi Experts,
we made a changes to a table and then transported the table to the quality system. But a program which is referring to this table, results in dump with the below error message.
Error Message>>>>>>>>>>" A newer version of data type <TABLE> was found than one required "
The issue occures inspite of
1. re-activated the table and send to quality system
2. Re-activated the program
3. Activated and adjusted database in SE14.
Please let me know the correction to be taken to resolve the issue.
Regards
Suresh Kumar

This happens when you modify your new data element, domain while another program is currently using it.
Simply get out completely of the program, re activate the program, reactivate the table. You might need to run se14 to convert the database table but this does not happen frequently. Try first to reactivate the program
Dean
Edited by: Dean Ton on Mar 8, 2012 9:54 PM
Edited by: Dean Ton on Mar 8, 2012 9:56 PM

What is the data type for the Data Dashboard XY Graph?

Hey all,
I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
What gives? Am I missing something obvious? Thanks for the help!!
Tom
Solved!
Go to Solution.

Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

How do determine data type?

I am trying to write my own binary file saver and I need to list the data type in the custom header. How do you do this in labview?

kameronrausch wrote:
The data acquistion spits out data in several different formats so a priori, I do not know the data type. It can be either a 32-unsigned int, 16-bit unsigned int, 8-bit unsigned int or the signed version of each one of these. To make the program general purpose however, I would like to incorporate floating point data points as well.
At some point you have to know what the data type is before start collecting data. If all you have is a stream of bits there is no way to determine what the data type is. What controls how the data acquistion is getting its data? If it is test specific you could use an external configuration file to store this and use that to determine how the data should be interpreted. If you have arrays of specificdata types you could use a polymorphic VI for your data writes. Based on teh wire type of the input the appropriate VI would be called. How is your data being passed from your data acquistion to the VI that will write it to a file?
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Issue when SelectOneChoice is used with Domain data type in JDev 11.1.2.0.0

Hi,
I am facing one issue while working with SelectOneChoice along with Custom Domain data type. Sample app to simulate the issue is available at http://www.filejumbo.com/Download/6FDF6ECF2922BD24
Issue Details.
Base view object’s attribute is of type CustomString, for which another static VO’s attribute is attached as LOV. LOV attribute is of type String. Because of this data type mismatch between LOV VO attribute and Base VO attribute, while working in screen, initially we were facing Class cast exception.
Cannot convert <<LOV Attr. Val.>> of type class java.lang.String to class model.domain.common.CustomString This is not only for this type of SelectOneChoice but also for InputText field whose underlying VO attribute is of type CustomString (i.e. any Custom Domain type)
On raising this in Jdeveloper forum, I came to know that adding a default oracle converter against the UI Component will take care of converting to respective data type. After added the converter for InputText and SelectOneChoice components, this issue got resolved. This was our lesson while working in Jdeveloper version 11.1.1.3.0. Converter we used,
<f:converter converterId="oracle.genericDomain"/> When we try the same scenario in Jdev Version 11.1.1.4.0, without having the oracle converter itself, SelectOneChoice started working fine!! (i.e. it is able to set the base attribute with LOV attribute’s value but with proper base attribute’s domain data type). Anyhow, converter is required for InputText.
When we try the same scenario in Jdeveloper new version 11.1.2.0.0, it started giving class cast exception when we don’t have oracle converter for SelectOneChoice. But by adding it, though it didn’t give such class cast exception message, though a selection is made in SelectOneChoice, VO attribute has not been updated with the new value. Instead it is updated with null value (Checked the setter method of view row impl by having break point) . Because of this, after a selection is made, when we try to read the attribute value from VO on button click, VO attribute always returns null.
We have also tried our own converters but there is no change in the behavior.
The above misbehavior can be tested either by having SOP programmatically or by refreshing the SelectOneChoice by giving its id as Partial trigger to itself with autosubmit set to true, so that the selected value will be reset to null irrespective of the selection made.
For convenience, Issue details with Sample application is shared. Shared link : http://www.filejumbo.com/Download/6FDF6ECF2922BD24
Shared folder contains
1. Sample App developed on Jdev 11.1.1.4.0 to ensure it didn’t give this error.
2. Sample App developed on Jdev 11.1.2.0.0 to simulate this error.
3. Error details in a document.
Can anybody have a look at this and tell me why this misbehavior and is it a bug? If so, any workaround available to continue the development?
Thanks in Advance.
Raghu
Edited by: Raguraman on Sep 10, 2011 10:31 AM

Sorry for the late reply John and Frank. Ya i did. Thank you.
One more detail:
I tested the behavior in Jdeveloper 11.1.2.0.0. The recent surprise is Select One Choice is behaving perfectly when it used in Grid layout and fail to work when it is form layout. I am getting surprised why behavior of component varies based on the way it refers the binding.
for form layout,
value=#{bindings.
for grid layout,
value=#{row.bindings.
The bug details (#/title) are Bug 12968871 - RUNTIME CONVERSION FAILURE WHEN USING CUSTOM DOMAIN OBJECT VALIDATION IN EO
Edited by: Raguraman on Sep 12, 2011 8:23 PM
Edited by: Raguraman on Sep 12, 2011 8:31 PM

How to determine data type of cell in Excel file

I have a company standard Excel file that needs to be read to determine what tests to run. I have no control over its format. I need to be able to tell what the data type is in order to read it using the LabView sample code. It is a hodge poge of numbers and strings. Some of the numeric fields are formated as hex while some are floating point. There does not appear to be a vi that I can call to determine info about the cell formating. As I remember it, the Windows Active X control for accessing Excel support that. I really was hoping to avoid dealing with the Active X control for Excel directly.
Any help/ideas?
Outputting it in CSV or similar is not an option.
Solved!
Go to Solution.

If you have to deal with Excel directly, I don't see how you're going to get around using Active X.
MSDN page on using ActiveX

Display data type

hi,
how to display oralce's data type from system table is there any system table to fetch the data types for that version i'm using Oracle 11g.
in sql server we fetch the details by using
select * from sys.types
this will return what the data types supported by that version
Thanks!

There is a package called STANDARD in the SYS schema that defines many of the standard datatypes and functions.
e.g.
CREATE OR REPLACE package SYS.STANDARD AUTHID CURRENT_USER is              -- careful on this line; SED edit occurs!
/********** Types and subtypes, do not reorder **********/
type BOOLEAN is (FALSE, TRUE);
type DATE is DATE_BASE;
type NUMBER is NUMBER_BASE;
subtype FLOAT is NUMBER; -- NUMBER(126)
subtype REAL is FLOAT; -- FLOAT(63)
subtype "DOUBLE PRECISION" is FLOAT;
subtype INTEGER is NUMBER(38,0);
subtype INT is INTEGER;
subtype SMALLINT is NUMBER(38,0);
subtype DECIMAL is NUMBER(38,0);
subtype NUMERIC is DECIMAL;
subtype DEC is DECIMAL;
subtype BINARY_INTEGER is INTEGER range '-2147483647'..2147483647;
subtype NATURAL is BINARY_INTEGER range 0..2147483647;
subtype NATURALN is NATURAL not null;
subtype POSITIVE is BINARY_INTEGER range 1..2147483647;
subtype POSITIVEN is POSITIVE not null;
subtype SIGNTYPE is BINARY_INTEGER range '-1'..1; -- for SIGN functions
type VARCHAR2 is NEW CHAR_BASE;
subtype VARCHAR is VARCHAR2;
subtype STRING is VARCHAR2;
subtype LONG is VARCHAR2(32760);
subtype RAW is VARCHAR2;
subtype "LONG RAW" is RAW(32760);
subtype ROWID is VARCHAR2(256);
-- Ansi fixed-length char
-- Define synonyms for CHAR and CHARN.
subtype CHAR is VARCHAR2;
subtype CHARACTER is CHAR;
type MLSLABEL is new CHAR_BASE;
-- Large object data types.
-- binary, character, binary file.
type BLOB is BLOB_BASE;
type CLOB is CLOB_BASE;
type BFILE is BFILE_BASE;
-- Verbose and NCHAR type names
subtype "CHARACTER VARYING" is VARCHAR;
subtype "CHAR VARYING" is VARCHAR;
subtype "NATIONAL CHARACTER" is CHAR CHARACTER SET NCHAR_CS;
subtype "NATIONAL CHAR" is CHAR CHARACTER SET NCHAR_CS;
subtype "NCHAR" is CHAR CHARACTER SET NCHAR_CS;
subtype "NATIONAL CHARACTER VARYING" is VARCHAR CHARACTER SET NCHAR_CS;
subtype "NATIONAL CHAR VARYING" is VARCHAR CHARACTER SET NCHAR_CS;
subtype "NCHAR VARYING" is VARCHAR CHARACTER SET NCHAR_CS;
subtype "NVARCHAR2" is VARCHAR2 CHARACTER SET NCHAR_CS;
subtype "CHARACTER LARGE OBJECT" is CLOB;
subtype "CHAR LARGE OBJECT" is CLOB;
subtype "NATIONAL CHARACTER LARGE OBJEC" is CLOB CHARACTER SET NCHAR_CS;
subtype "NCHAR LARGE OBJECT" is CLOB CHARACTER SET NCHAR_CS;
subtype "NCLOB" is CLOB CHARACTER SET NCHAR_CS;
subtype "BINARY LARGE OBJECT" is BLOB;
subtype pls_integer is binary_integer;
type TIME is new DATE_BASE;
type TIMESTAMP is new DATE_BASE;
type "TIME WITH TIME ZONE" is new DATE_BASE;
type "TIMESTAMP WITH TIME ZONE" is new DATE_BASE;
type "INTERVAL YEAR TO MONTH" is new DATE_BASE;
type "INTERVAL DAY TO SECOND" is new DATE_BASE;
SUBTYPE TIME_UNCONSTRAINED IS TIME(9);
SUBTYPE TIME_TZ_UNCONSTRAINED IS TIME(9) WITH TIME ZONE;
SUBTYPE TIMESTAMP_UNCONSTRAINED IS TIMESTAMP(9);
SUBTYPE TIMESTAMP_TZ_UNCONSTRAINED IS TIMESTAMP(9) WITH TIME ZONE;
SUBTYPE YMINTERVAL_UNCONSTRAINED IS INTERVAL YEAR(9) TO MONTH;
SUBTYPE DSINTERVAL_UNCONSTRAINED IS INTERVAL DAY(9) TO SECOND (9);
TYPE UROWID IS NEW CHAR_BASE;
type "TIMESTAMP WITH LOCAL TIME ZONE" is new DATE_BASE;
subtype timestamp_ltz_unconstrained is timestamp(9) with local time zone;
subtype BINARY_FLOAT is NUMBER;
subtype BINARY_DOUBLE is NUMBER;
-- The following data types are generics, used specially within package
-- STANDARD and some other Oracle packages. They are protected against
-- other use; sorry. True generic types are not yet part of the language.
type "<ADT_1>" as object (dummy char(1));
type "<RECORD_1>" is record (dummy char(1));
type "<TUPLE_1>" as object (dummy char(1));
type "<VARRAY_1>" is varray (1) of char(1);
type "<V2_TABLE_1>" is table of char(1) index by binary_integer;
type "<TABLE_1>" is table of char(1);
type "<COLLECTION_1>" is table of char(1);
type "<REF_CURSOR_1>" is ref cursor;
-- This will actually match against a Q_TABLE
type "<TYPED_TABLE>" is table of "<ADT_1>";
subtype "<ADT_WITH_OID>" is "<TYPED_TABLE>";
-- The following generic index table data types are used by the PL/SQL
-- compiler to materialize an array attribute at the runtime (for more
-- details about the array attributes, please see Bulk Binds document).
type " SYS$INT_V2TABLE" is table of pls_integer index by binary_integer;
-- The following record type and the corresponding generic index table
-- data types are used by the PL/SQL compiler to materialize a table
-- at the runtime in order to record the exceptions raised during the
-- execution of FORALL bulk bind statement (for more details, please
-- see bulk binds extensions document in 8.2).
type " SYS$BULK_ERROR_RECORD" is
          record (error_index pls_integer, error_code pls_integer);
type " SYS$REC_V2TABLE" is table of " SYS$BULK_ERROR_RECORD"
                               index by binary_integer;
/* Adding a generic weak ref cursor type */
type sys_refcursor is ref cursor;
/* the following data type is a generic for all opaque types */
type "<OPAQUE_1>" as opaque FIXED(1) USING LIBRARY dummy_lib
    (static function dummy return number);
type "<ASSOC_ARRAY_1>" is table of char(1) index by varchar2(1);
/********** Add new types or subtypes here **********/
/********** Predefined constants **********/
BINARY_FLOAT_NAN constant BINARY_FLOAT;
BINARY_FLOAT_INFINITY constant BINARY_FLOAT;
BINARY_FLOAT_MAX_NORMAL constant BINARY_FLOAT;
BINARY_FLOAT_MIN_NORMAL constant BINARY_FLOAT;
BINARY_FLOAT_MAX_SUBNORMAL constant BINARY_FLOAT;
BINARY_FLOAT_MIN_SUBNORMAL constant BINARY_FLOAT;
BINARY_DOUBLE_NAN constant BINARY_DOUBLE;
BINARY_DOUBLE_INFINITY constant BINARY_DOUBLE;
BINARY_DOUBLE_MAX_NORMAL constant BINARY_DOUBLE;
BINARY_DOUBLE_MIN_NORMAL constant BINARY_DOUBLE;
BINARY_DOUBLE_MAX_SUBNORMAL constant BINARY_DOUBLE;
BINARY_DOUBLE_MIN_SUBNORMAL constant BINARY_DOUBLE;
/********** Add new constants here **********/
/********** Predefined exceptions **********/
CURSOR_ALREADY_OPEN exception;
    pragma EXCEPTION_INIT(CURSOR_ALREADY_OPEN, '-6511');
DUP_VAL_ON_INDEX exception;
    pragma EXCEPTION_INIT(DUP_VAL_ON_INDEX, '-0001');
..and so it goes on... take a look yourself
Edited by: BluShadow on 18-Dec-2012 09:32

Not able to map extension data type in standard namespace.

Hi guys,
I have a customer who has this problem. I am from the Business Partner area and BP supports XI for data exchange. We provide standard message types in XI which contains core BP fields in ABA namespace. Corresponding complex structure exists in the ABAP system.
Now, the customer has created an enhancement data type for one of the data types present in the standard message type. This enhancement data type is present in another namespace. The customer has also generated the proxy for this enhancement data type which automatically created an Append structure to the standard complex structure in ABAP.
Now, from the ABAP side all the data is extracted including the enhancement data into the complex structure. In one of the outbound function modules, we call XI passing this data in complex structure. However, we call XI in ABA namespace. So, in XI, since the ABA namespace does not contain the enhancement data type, the customer is not able to map this to his target. Even though we send all the data from ABAP to XI, since we call it in ABA namespace, the enhancement data is lost.
So, is there any way of mapping this enhancement data also in ABA namespace itself. Or from the ABAP, should I call the namespaces seperately. This means, first I will call ABA namespace to map all standard fields. Then, I call customer specific namespace to map enhancement data type.
I would really appreciate a help over here since its a very important customer for SAP.
Many thanks,
Vikram

I thing for customer mapping you have to do an mapping in our own namespace.
than you need a copy of the fb BUPA_OUTBOUND_MAIN an also from fb
ABA_BUPA_CALL_PROXY.
in the copy of ABA_BUPA_CALL_PROXY you can call your own proxy
do to changing this line
DATA : lo_ababusiness_partner_out TYPE REF TO co_ababusiness_partner_out ."XI.3.0
to
DATA :lo_ababusiness_partner_out TYPE REF TO yourproxy_mt
see also weblog /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner

What is "Data Type" in Custom Script of Requirement

Similar Messages

Maybe you are looking for