What is Error 0xE8000001?

Hello all
Lately I've been *having problems when docking my iPhone to the Universal Dock* connected to my iMac:
(See also http://discussions.apple.com/thread.jspa?threadID=2309428)
- When dock in, the '*dock chime' will not sound*
- There will be pop up messages saying something like "this accessory is not (suitable) for this iPhone"
- Sometimes it will ask whether want to switch to Airplane mode
And at this point, *sometimes the phone will not charge/sync/appear in iTunes*, either
- undock and dock again
- quit iTunes launch again with phone remains in Dock
Sometimes after OK the pop up message above, there is no 'dock in' chime, but the phone will continue to dock/charge/sync, but it will remain silent, i.e. no sms tone nor alarm
Then sometimes when I shift the phone a little, it will "disconnect" and re-dock with the chime, but after some split seconds, iTunes pop this message
*iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)*
I have never encounter this error before, at least not in Leopard. *I seem only have these problems after I upgraded to Snow Leopard.*
Someone suggested in my other post, then there maybe a damage or bent pin, he did not specify whether it is in the Dock or in the phone.
But I've *tried a couple of Universal Docks at home, all has the same messages, problems*. But once plugging the U Dock with a power supply, I hear the chime. I even change USB cable, no help
Could my phone's connector be damage instead??
Need some advice, 'cause this seems a small problem, but quite annoying, since I dock my phone day in day out to my mac
Thanks and cheers

I'm getting the same range of errors for about half of the apps I have installed. The apps are there and functioning, but if there is an update it will not be applied, I have to delete the app from my Iphone (and yes loose any preferences) and then install the updated version of the app.

Similar Messages

100% CPU Usage, Sound configuration Error and Unknown Error (0xE8000001)

Hi, I just bought a iPod Touch - amazing iPod I must say.
Pluged it in to my Windows Xp to sync some music. (I've been using iTunes for several years now and just upgraded from a 1st generation iPod nano to a 16 Gb touch).
It connected very well and I was ready to sync but then I made a stupid mistake - I updated iTunes to be sure that every thing was up to date.
After the update I get an error about my sound configuration (I've tried uninstalling QuickTime and installing again - didn't work). iTunes open up and starts to sync and now a second issue apears. It uses all of my CPU - flatlinig at 100%, so I cannot use my computer at all. It is now syncing but extremely slow - one song takes about a minute. Now the iPod touch starts to say these weird sounds and rebooting every 20 seconds or so. Finally I get an eroor in iTunes saying that there has been an unknown error (0xE8000001).
So I'm stuck with iTunes not working and no songs on my iPod.. :o(
What to do..?

Hi, I just bought a iPod Touch - amazing iPod I must say.
Pluged it in to my Windows Xp to sync some music. (I've been using iTunes for several years now and just upgraded from a 1st generation iPod nano to a 16 Gb touch).
It connected very well and I was ready to sync but then I made a stupid mistake - I updated iTunes to be sure that every thing was up to date.
After the update I get an error about my sound configuration (I've tried uninstalling QuickTime and installing again - didn't work). iTunes open up and starts to sync and now a second issue apears. It uses all of my CPU - flatlinig at 100%, so I cannot use my computer at all. It is now syncing but extremely slow - one song takes about a minute. Now the iPod touch starts to say these weird sounds and rebooting every 20 seconds or so. Finally I get an eroor in iTunes saying that there has been an unknown error (0xE8000001).
So I'm stuck with iTunes not working and no songs on my iPod.. :o(
What to do..?

2.2 + error (0xE8000001)

Hi,
Earlier today i just got my app loaded onto my iPhone (running 2.2). I was going back and forth testing, no problem. All of a sudden, when I try to Build and Run, I get an error:
"Your mobile device has encountered an unexpected error (0xE8000001)"
"Try disconnecting and powering off the device; then power the device on and reconnect it."
Ok so this was just working fine, and of course I tried the old reboot, no luck. I even reinstalled my provision and everything. When XCode is trying to move the application over to the phone, it does print two lines in the logs:
Tue Dec 2 15:05:21 unknown afcd[73] <Error>: user mobile has uid 501
Tue Dec 2 15:05:21 unknown afcd[73] <Error>: mode is 0x41e8
Anyone else getting this? Seems like there are some guides for 2.1, but Apple has changed things with 2.2. It also seems like this process is plagued with difficulties! I guess I'll just keep playing with it for now as I've already gone through the guide Apple provided several times.
Thanks

I recreated my provisioning profiles (dev and ad-hoc) then created an entirely new project with a different name. Copied all my files to the new project and set everything up. (bit of a sledge hammer approach) I installed on my device with the debug build using my dev provisioning profile and it installed fine. I deleted it and reinstalled and it was fine.
The next thing I did was try to install my beta build with the ad-hoc provisioning profile overtop of the existing debug/dev build on my device. Once I did this, I was back to the original errors (0xE8000001, 501, 0x41e8)
@markww We you attempting anything similar? (installing on top of an existing app with a different build/provisioning profile?)
Anyone see an obvious flaw in what I did or any solutions? Thanks!
Message was edited by: bjtylerx

Rebellious iPhone (Error 0xE8000001)

I've been searching through a few threads discussing this issue, and there doesn't seem to be a definite answer yet. Here's this issue:
Issue:
My iPhone does not want to stay connected to my computer for more than 20-30 minutes at a time. Which is a problem, because sometimes I wake to find that my battery was not charging overnight like it should have. I get one of two error messages:
http://www.liberateart.com/error1.png
http://www.liberateart.com/error2.png (Unknown Error 0xE8000001)
*What I Know*
Searching for answers, I've heard this error is causes by USB ports. I have a brand new 20" iMac 2.4, with three USB 2.0 ports. I've tried every port (even the ones on my keyboard, which I know you're not supposed to do, but no luck), and I still get it disconnecting.
*What I've Tried*
Plugging it into every USB port and seeing if it does the same thing. Yep, every single one.
Restoring the iPhone (twice actually).
Reinstalled iTunes.
Updated all my software.
*What I Have*
iMac (Late 2007) 20" 2.4 Intel Core Duo
OSX 10.5.2
iPhone 1.1.4
iTunes 7.6.1
No USB Hubs
Anyone have any thoughts was might be causing this, or any possible solutions? My last resort is to do a clean erase and install, but I'm dreading to do it. If it's hardware, I don't want to end up with the same error message after doing a clean erase and install.
Any advice would be greatly appreciated. Thank you!

This has happened to me as well with both my iPhone and iPod Touch, let me show you a few things that may help resolve this problem, if one of these doesn't work try the next one, at least one should work!
1: In November last year I had iTunes (Version 7.5), what I did for my iPhone to work is I downgraded my iTunes version to Version 7.4 and it worked just fine. This is a link to download iTunes 7.4 if you like: http://itunes.brothersoft.com/itunes7.4, please note that it says for Windows Vista, XP, 2003, XP64, ignore that because I run Mac and it downloaded.
2: Go into "Activity Monitor" and force quit iTunes helper then replug the iphone in another USB drive and reopen iTunes.
3: Turn off your iPhone and restart your Mac, then once restarted go into iTunes and turn on your iPhone.
4: You don't have a hub, but if your friends do you could borrow it and that may work.
5: Delete then re-install iTunes Delete the following files:
The iTunes application (located in /Applications)
com.apple.iTunes.plist (from ~/Library/Preferences)
iTunes.pkg (from /Library/Receipts)
iTunesX.pkg (from /Library/Receipts)
After that re-install the LATEST version of iTunes which is found on the apple website.
I hoped this information helped!

IPhone Ad Hoc distribution error 0xe8000001

Sending an Ad Hoc distribution profile .mobileprovision file and the Distribution build .app to another user to install via iTunes does not seem to work. At all. We only get error 0xe8000001 when iTunes tries to sync. We have checked and double checked the Device IDs.
Has anybody got Ad Hoc iPhone/iPod Touch distribution to work?
Bearing in mind:
The Documentation for Ad Hoc is very sparse, just six bullet points
When creating an Ad Hoc Distribution profile on the Program Portal and then choosing Edit > Modify, you can see that the Type has changed back to App Store from Ad Hoc.
Whats going on? Does this work at all? Is there anybody out there who has got it working?
Message was edited by: Ed Andersen

I'm having the exact same problem with ad hoc distribution. It builds fine, and I can see the app has been signed and it includes the mobileprovision file. But still I get same the error when iTunes tries to install the app.
Has anyone gotten ad hoc distribution to work?

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

What does error message 150:30 in Photoshop Elements 8 mean?

I have adobe photoshop elements 8 and, out of the blue, I get a message stating that I need to reboot for it to work. I reboot and it still doesn't work. Then there is an Error message 150:30 exhibited on the page. Adobe is too irresponsible to simply tell me what the error message means or provide a list for it, at least one I can find so I thought I'd solicit the good graces of other for help since help from Adobe is simply a shakedown for money due to their negligence and failure to support their products.

What's your OS? If you are on a Mac then try this Adobe Official Solution:
<http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html>
Hope this gets you started.

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

TS3694 I have an ipad, 2 yrs old, that will not restore, due to error 3. what is error 3?

What is error 3 ? I have a list of many but not that one. Ipad opens with a silver apple on a black screen, then when you hit HOME, it turns on for 30 seconds and a black screens comes in from the left, shutting it down. After 10 tries i got a graphic to plug into itunes, so did it. My mac worked on iy for 30 minutes, then came back with error 3.
The ipad was taken to an Apple store & the genious said there was a battery problem and there was nothing they could do?
Ideas?

Thanks Alfred,
My iTunes on the Air are up to date. Tried 3 times to restore and always get error 3. The iPad now only shows the graphic to plug into iTunes.
Called hotline to Apple rep yesterday, (chat) then they phoned me. He couldn't figure it out and went to consult a colleague. That was yesterday afternoon & he hasn't called back yet. This is on my dime.
Any idea what error 3 is.
Talaguniak
Mac user since 1984,
512k origininal, just smoked itself 4 months ago due to internal corrosion.
Now using Air, iPad mini, iPhone

Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

What is error 1403 and how to fix it

what is error 1403 and how to fix it

Read this thread, maybe you can find the fix
https://discussions.apple.com/thread/3406391?start=0&tstart=0

HT201210 what is error (1618) when trying to restore an iphone 5

what is error (1618) when trying to restore an iphone 5???

Try uninstalling iTunes, restart your computer and re-install iTunes.

What is error code 603 and how does one fix it?

What is error code 603, please, regarding add-on installation? (The error codes page says for "error 6xx" to contact the Exchange online forum for assistance..) It is a "failed online license check" for an add-on that is a free add-on listed on the Adobe Add-ons page as compatible with PS CS6, CC, and CC 2014, as well as all three versions of a bunch of other apps. It is a Flypaper app, which looks to have been reworked to be compatible with the new 2014 apps. Since Flypaper apps come from reliable source, I'm not sure what the error means, and I'm certainly not sure how to remedy this. (The original Russell Brown Paper Textures Pro works fine on PS CC but isn't compatible with 2014.)
I am running Win 7 64-bit.
Thanks.
Gail
p.s. numbers of other extensions still don't download to PS 2014, so maybe this is also waiting for an Adobe fix??

The add-on in question is called "Flypaper Select" (by Flypaper Textures).
This morning, when I sent the question, it was on last page of the free PS
add-on list and showed the add-on as compatible with all three latest PS
versions. Tonight, when I click on the add-on in "my add-ons" list, it now
shows compatibility only with PS6 and CC, and I can no longer even find it
in the big add-ons list. I will try to send screen shot of "my add-ons" to
the address you listed. It is also below.
Thanks for your help. I have been finding many add-ons change from day to
day, and many won't show up in Extensions window even though the desktop CC
app says they have been installed. I assume I am not the only person with
these problems.
Gail

HT201210 what is error code (1)? it is not listed but this is the error i get trying to restore my 3gs.

what is error code (1)? it is not listed but this is the error i get trying to restore

Take a look here for Apple's suggestions on that error:
http://support.apple.com/kb/TS3694#error1
Regards.

How fix iPhone encountered unexpected error 0xE8000001 install phase?

Please help ( if there is an iPhone developer forum somewhere please redirect me)!
I can not get even the sample "Hello World" application to download and run on my iPhone device. I have spent hours googling and messing around in the iPhone Developer Program Portal trying to figure out where I went wrong. I get the following error after I build and run:
"Your mobile device has encountered an unexpected error 0xE8000001 during the install phase: Verifying application"
"Try disconnecting and powering off"
Any tips, resources, or advice is much appreciated. I about to the point to consider wiping and reinstalling my Mac in a hope it may improve whatever I did wrong between SDK1-8.
Thanks in advance,
-Ed

Thank you _very much_ for looking at my "Bundle identifier" syntax. I think I am getting closer. I removed the 10-digit prefix from the Info.plist "*Bundle identifier*" setting. My setting is now entered as seen below.
"*myapp.com.mycompany.${PRODUCT_NAME:identifier}*"
My new challenge is that when I build-and-go it displays the following message in the bottom-left:
"*Failed to start remote debugserver for (null) on Ed's Phone*"
Any advice is much appreciated and I appreciate all others who have added comment to this thread.
-Ed
For others that are having similar problesm, you can now print out the portal "How to" adventure game. On the portal home page is a link to the following PDF. I am planning on printing out and reading the whole thing and high-lighting all the important bits and steps.
http://adcdownload.apple.com/iphone/iphone_developer_program_user_guide/iphone_d eveloper_program_user_guide__standard_program.pdf
*A tip to check if you have a valid "Code Signing Identity" installed and entered in your project Build settings.*
1 - Select the root folder in your code project
2 - Press the "i" info icon on the tool bar
3 - Go to the *Build* tab
4 - The format of Code *Signing Identity->Any iPhone OS Device* setting is case sensitive and looks like: "*iPhone Developer: John Doe*"
5 - If it is correct, the associated provisioning profile will appear in the drop-down list of the Code Signing *Provisioning Profile->Any iPhone OS Device* setting. If you mess it up, do it intentionally by try adding an extra character, you should see the provisioning profile disappear from the list. If you see no change, you may have a bad developer name(wrong case?) or provisioning profile or profile install problem.

What is Error 0xE8000001?

Similar Messages

Maybe you are looking for