What is required when adding references when building up a new development computer?

I just took over an existing project from another developer. I am using Visual Studio Ultimate 2012 Update 4
I am trying to set up a new, clean, development machine but this project has references to ComponentOne Studio for WinForms software for which I cannot find the install programs. I do have access to the actual DLL files that are referenced in project. 
Can I simply copy the referenced DLL files from the old development computer to a folder on my new development computer and add a reference to them in my project or am I actually required to install the Studio for Win Forms product to get access to these DLLs
for the reference?
Thanks in advance for any help.
Dave

Hello Dave,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the dll that you want to reference is the dll of
ComponentOne Studio for WinForms software which is third-party, I suggest consulting your issue on ComponentOne forums:
http://our.componentone.com/groups/ for better support.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • When adding a PDF file to a New Message in Mail it does not show up as an icon link, the entire document appears. How can you attach a PDF without the entire document displaying itself?

    After scanning a document, I save the file in a PDF format. When attaching the PDF file to a New message it appears on the entire page instead of a PDF icon link that the recipient can click on to open. Why can't I get the PDF file to appear in a icon format? Thank you.

    Control mouse click the document and select View as icon.

  • What permissions require to create CASES (Service Module). Creating new role.

    Hi All,
    Can you please suggest me what permission require to create new case from service module. Steps is below i followed to create case and assigned to user.
    1- Created new blank role.
    2- Went in service module.
    3- Given the Create, Read, Write, Append & Append To permission to CASE entity on organization Level.
    4- Assigned this role to user.
    After assigning this role login into crm online and trying to create case. Its giving message "Insufficient Permission".
    Kindly suggest me the steps i am missing here. Want to assigned single custom created role.
    Thanks in Advance

    Hello,
    Recheck following article -
    http://www.powerobjects.com/blog/2015/02/13/access-denied-identify-fix-security-role-issue/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+PowerobjectsMicrosoftCrmBlog+%28PowerObjects+Microsoft+CRM+Blog%29
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • Can you customize what folder MAIL goes to when adding attachments?

    Can you customize what folder MAIL goes to when adding attachments?
    My friend has 2 email addresses for businesses.
    He has invoices in folders for both, and wants to set up the Mac like this:
    When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
    Make sense?
    Can this be done?
    Thanks in advance....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

    Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
    Not able to book the sales order because of this issue

    Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail).  Allowing for such would therefore require customization.
    As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it.  And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM.  The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing".  OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent).  OM customization is therefore required in order to hook any service item up to its corresponding product item.  Many customers who configure service along with product have implemented such a customization.
    (Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract.  Customers have likewise developed customizations to address this, as well.)
    As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous).  It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
    Eogan

  • What is required in the HOST and QUEUE field when ...

    Hi
    When setting up my printer, i fill the options identical to what follows:
    PRINTER:  SAMSUNG HOME
    DRIVER:    GENERAL
    BEARER:  LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
    The following fields appear once LPR is selected:
    ACCES POINT : HOME
    HOST:              WHAT COMES HERE?
    USER:              SKY00BER
    QUEUE:            WHAT COMES HERE?
    ORIENTATION: PORTRAIT
    PAPER SIZE: A4
     if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
    please do correct me if there has to be changes to the BEARER or anything else.
    i could really use some help.
    thanks in advanced.

    sky00ber wrote:
     Hi,
    What is required in the HOST and QUEUE field when setting a WIFI printer?
    When setting up my printer, i fill the options identical to what follows:
    PRINTER:  SAMSUNG HOME
    DRIVER:    GENERAL
    BEARER:  LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
    The following fields appear once LPR is selected:
    ACCES POINT : HOME
    HOST:              WHAT COMES HERE?
    USER:              SKY00BER
    QUEUE:            WHAT COMES HERE?
    ORIENTATION: PORTRAIT
    PAPER SIZE: A4
     if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
    please do correct me if there has to be changes to the BEARER or anything else.
    HELP URGENTLY NEEDED!
    I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
    If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • What locks are required on a table when Oracle is processing an UPDATE

    What locks are required on a table when Oracle is processing an
    UPDATE statement?

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version.
    >
    What locks are required on a table when Oracle is processing an
    UPDATE statement?
    >
    Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
    >
    Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
    >
    The above describes the locks when you, the user, tells Oracle to lock the row.

  • When adding a mp4 videos as a slide, what should quality be changed to?

    When adding a mp4 videos as a slide, what should quality be changed to? (Optimized, J-Peg or High 24-bit)
    What will this do?
    Thanks,
    Mike

    Himanshu, if loading a video on a slide, would the slide quality setting for that slide have any effect at all? It's my own understanding that the videos are always separate and loaded when needed. So I'm curious if the slide quality would remotely matter in this case.
    Cheers... Rick

  • Initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
    Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
    Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
    Open cmd prompt and type "cd c:\temp".
    Launch the browser and open the PDF.
    Open task manager, sort processed by name. Two AcroRd32.exe instances  should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
    On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
    Perform your steps to cause the crash.
    Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
    Thanks in advance for all your help
    Ankit

  • What is the BEST way to delete an app on an iPhone 4S so it will NOT be added back when I sync with iTunes?

    What is the BEST way to delete an app on an iPhone 4S so it will NOT be added back when I sync with iTunes?

    To completely remove an app and all of its data, do this: First delete the app on your phone, then in iTunes, under Library, click on Apps, right-click the app you want to delete & select delete, when prompted, move all files to trash, empty your trash. Connect your phone and sync. The app and all of its data will be gone.

  • What checkbox "import again" when adding an transport request to import que

    Hello
    I wander what checkbox "import again" when adding an transport request to import queue means?
    Thank you in advance

    Hello Jan,
    Well you should have searched in help.sap.com before posting here for basic concepts. Anyways, import again means after successful import also you can reimport that particular request.. Please see the below link for other options as well.
    http://help.sap.com/saphelp_nw04/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/content.htm
    Thanks,
    Siva Kumar

  • I have added my hotmail email account to my ipod but when I open/delete emails it is not syncing with my computer. What can I do so that when I delete emails from my ipod, they show up as deleted when I access hotmail from my computer.

    I have added my hotmail email account to my ipod but when I open/delete emails it is not syncing with my computer. What can I do so that when I delete emails from my ipod, they show up as deleted when I access hotmail from my computer?

    If you like to set up the Hotmail account as an Exchange account, see this Apple support document.
    iOS: Hotmail, Live, or MSN email accounts
    B-rock

  • I can not register. requires a bank card. when choosing a card the word "no" is not present. What to do?

    I can not register. requires a bank card. when choosing a card the word "no" is not present. What to do?

    You are supposed to be able to set up an account without a credit card. See HT2534 - Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card.
    If you've already created the Apple ID that you want to use and are now being asked for a credit card try the method given here. If you use this I'd be interested to know how you get on because I haven't yet had the time to try it myself.
    tt2

  • When adding Airport to a "receiver/amplifier" to play music from iTunes files on iMac and iPad, to what do I connect airport?

    When adding Airport to a "receiver/stereo amplifier" to play iTunes and other music files on my iMac and iPad, what do I connect Airport to? Aux on the receiver/amplfier? Thanks, Terrell

    How does iPhoto figure into this?  Your question seem more like an Airport question.
    OT

  • When adding credit card to account what is the issue number

    I cant figure out the issue number they want when adding credit card to the account.  Does anyone know what they are asking for?

    The issue number is the credit card's embossed number.  Then there is the security code that usually is a 3 or 4 digit code found on the back on the signature stripe.

Maybe you are looking for