What is the audio throughput via usb on the new macbook air?

I just purchased a new macbook air and was wondering what kind of audio that I would get as output from the computer via usb. In particular I am interested what kind of audio I am sending as output to my Bose T1 Tonematch Mixer?

Cheap, but with some risk: Ebay
Inexpensive, no risk: Staples, Best Buy, Office Depot or Office Max. (one of them seems to always be running a sale on Office for Mac Home and Student for $99.00.
You can always try Amazon, too.
Remember: Even if you buy the DVD at a store, you can still download afterwards from Microsoft, and then just use the Key that comes with the box purchase of Office you bought. That way, you don't have to worry about finding a means of using that DVD with yoru MBA.

Similar Messages

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

When I login to my bank, I get the message: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. Have new MacBook Air with Yosemite. How to solve this problem?

When I try to login to the website of my bank, I get the following error message:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have a new MacBook Air with OS Yosemite installed.
What is the problem and how can I solve it?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

Can't get the music from my iPhone onto my new MacBook Air.

Hi, I just bought a new MacBook Air, but when i plugged my iPhone in, it said it would delete all of my music when i sinced. Does this mean that all of my music will be wiped from my phone or just the songs that weren't bought using my iTunes? I also have a PC with the same songs on it.

Have a look at the link below and see if it helps you out....
http://support.apple.com/kb/HT4527

Connected Apple TV Box tonight and it said it needed an update. I ran the update, and it worked for a few minutes. Then all of a sudden, a screen popped up showing that I needed to connect via USB plug to my MacBook Air to connect to iTunes. Why??

I conneced the Apple TV and it worked fine at first. It has worked well for some time. We are using them in our school this year, as well as converting to all apple products. I have been able to pull up my computer screen through Apple TV onto our projectors. However, tonight when I started apple TV, the mirroring icon came up, and everything seemed fine. Then a message came up that the Apple TV Box needed an update. I clicked on the button to run it now, and it seemed fine. The mirroring worked for about 5 minutes after the update, then I got a screen that had a picture of the Apple TV Box and a USB cord directed toward a picture of the iTunes icon. The light on the frontof the component flashed, and I couldn't go to the menu at all. I wouldn't do anything. I no longer cold see the Airplay/mirroring icon on my computer either. I tried to shut everything off and reboot the computer and the Apple TV box. However, none of this worked.
Any suggestions??? I'm a high school football coach, and this is how our team will watch film this year. I really need to get this rectified by the end of the week, as our team will go into camp for the next two weeks.

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

I have charged my Kobo reader using the USB port on my MacBook Air. I do not know how to eject it properly

I have charged my Kobo reader via usb port on my MacBook Air but do not know how to eject it safely before disconnecting the device from my laptop.

Open Finder and click the eject button beside the device name in the sidebar: Picture: http://blog.laptopmag.com/how-to-eject-usb-in-osx

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices to remedy the problem.
In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

Tethering via USB between the Z10 and a laptop or PC & and few Comments About the Playbook Tethering

Tethering via USB between the Z10 and a laptop or PC can be a bit tricky.
On the Z10 do the following:
On the Z10 go to the Settings.
Go to Network Connections.
Go to Internet Tethering.
Select USB.
Turn on Tethering.
On the computer run the Blackberry Link software for the Z10:
Once the software starts, connect the Z10 via the USB cable to the PC.
Open the browser.
You should now be able to cruise the net, and do emails.
With the Playbook, the Bluetooth tethering does not yet work. This may be an OS or communications issue.
The best way to tether the Playbook for full speed and functions is using the WiFi option. Simply turn on the WiFi hot spot option and follow the instructions. The Playbook WiFi must also be properly set up. The Z10 USB and Bluetooth tethering mode must be turned off when using the WiFi mode. You can leave the base Bluetooth active on the Z10. There is a lot of available information about using the WiFi hot spot from the Z10. The process is very similar to the past models of Blackberry phones.
If you use the Bridge mode to tether, the Playbook email client software does not work very well. The browser will work fairly well, but slower with the Bridge mode. With WiFi the Playbook can brows at very high speed. With Bluetooth it is restricted to about 1.5 to 2.5 mb/sec. Take care that the WiFi mode burns through battery time very fast on both the Playbook and the Z10. Using the Bridge mode uses less power consumption than WiFi.
To use the Bridge mode, make sure the Playbook and the Z10 are first Bluetooth mated. Also the Bridge mode has to be set up between the devices. You will have to first install the Bridge software in to the phone for this to work.
I did extensive testing between the Z10 and the Playbook. They function well together as far as Internet and email are concerned, in consideration of using either tether or Bridge, depending on what you want to do.
From what I understand the Bridge mode uses some compression. It will not be as fast as using WiFi or Bluetooth tethering. The data cost using the Bridge mode is probably a bit lower because of the compression.
As far as the Bridge phone options are concerned, these features are not yet available. From what I read in a number of articles there are going to soon be some updates coming out to fix this. The Bridge options are a big part of the tablet application with the Blackberry phone. This was the big original application point of this tablet, otherwise any generic tablet would do the job.
Jerry G.

From the look of this thread it appears that no one outside of Canada uses an OS 10 BB yet. 247 views and no comments or help ? I'm sure I'm not the only BB user that uses Tether. If BB doesn't care to help then this will just be another nail in the corporate coffin that has been projected.
Maybe we need different forums for US users as the Canadians don't seem to have the same issues or cares.
The whole idea of the app Tether is not to have to pay the outrageous tethering fees that US carriers charge and it has worked well for years. But it can't work and won't work in the future without help from BB and the BB community.

Daisy chain two external drives via Firewire, then connect one via USB to the TC?

Hi,
I have two external drives that have both Firewire and USB ports. My 1st generation 500 gb Time Capsule (maybe all of them?) only has USB ports so up til now, I have connected one or the other drive via USB. (I've tried to connect both to a powered USB hub but one drive has problems showing up. At this point I only use the one drive that shows up and connect it directly with no hub to the Time Capsue.)
My question is: Can I daisy chain the two drives via Firewire and then connect one of them (probably the one that has no problems connecting with USB) to the Time Capsule via USB?
Second, somewhat-related problem...
I don't know why one drive isn't connecting very well when directly connected to the Time Capsule. Both are Fantom drives. One is a 1TB, the one that has prblems connecting is a 250GB. I've tried connecting directly or through a powered hub. The 1B has no problems, the 250 gb won't show up most of the time and disconnects itself fairly quickly if it does connect. I've switched cables; that hasn't helped. The 1TB stays connected most of the time but sometimes it disconnects too. I suspect the Time Capsule just isn't able to deal with external drives so I don't puch it. It would be nice to be able to have both drives accessable through the TC though.
Thanks for any help.
Cheers,
John

Doing some experimentation, connecting the drives directly to the MBP:
- Neither of the two drives Firewire daisy-chained and going through the powered USB hub connected to the MBP mount. I was using old aliases on desktop.*They don't show up on network otherwise. (Each drive self-mounts with both Firewire and USB direct connections.)
*Even after making new aliases, neither drive will mount using their new aliases when directly connected (not through hub) with USB or Firewire (and Thunderbolt adapter.) That's weird.
- Both the 240 gb and the 1TB drives going through powered hub connected to MBP mount by themselves.
- Two drives daisy-chained via Firewire and one drive connected to the MBP via Firewire (and Thunderbolt adapter) self-mount. No surprise there but that doesn't help me as I want to have the drives further away from the MBP and connected to the Time Capsule, which doesn't have a Firewire port anyway...
- All of the USB and the Firewire cables work as does the Thunderbolt adapter. I tested them.
I wonder.... I have a Firewire to what appears to be an Ethernet connector. I wonder if that would be any good. I'm afraid to try it though...

Audio out via USB plays briefly , then shuts off

Hi,
I'm running version 10.4.11 on my iMac. I'm sending audio out via usb to an audio device (dac), the audio will play for a while and then just quit. This happens using iTunes or another music player I have on the iMac. This problem is recent, I have been doing this for about a year with no previous problems. Could an OS X update have caused a problem with the usb audio output? Anyone else experiencing this issue? It's become quite aggravating.
Thanks!

Yes.
http://www.griffintechnology.com/products/imic/

Multiple audio-outs via USB or Firewire?

I'm looking for a hardware solution for my mid-2010 MBP w/ 2-4 audio outputs via USB or Firewire. On the software side, I want to have multiple media players open and playing simultaniously, but each output separately. I was told m-audio makes devices that allow this, but I am curious which may be the cheapest with this capability - or alternate manufacturers.

I think you'd have better luck going to the m-audio forums and asking your question.
http://forums.m-audio.com/
It would be hit or miss to find someone here who's an expert on your issue. Also, you might post your question to the Logic Studio forum here:
https://discussions.apple.com/community/professional_applications/logic_studio
There are a lot of sound people there who might point you in the right direction with a MacBook Pro.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

TS2756 When trying to update ITunes on my pc using my Iphone 4 personal hot spot via usb connection the download interups and will not install.

When trying to update ITunes on my pc using Iphone 4 verizon personal hotspot via usb connection the download fails.

I called this problem into Apple and they solved it for me. The problem is in the downloader associated with iTunes. Skip that step and go to Apple.com and download the new iTunes softwere update (Version 11.1) directly. I did this and installed it successfully. After restarting the computer iTunes recognized my phone and all was well. Then I updated and installed the ios7 update without any problems. No charge. Full cudo's to Apple!

I have an ipone 3 . it will charge from the wall charger but not in the car or via usb nor will itunes detect it ?

i have an iphone 3 , it will only charge from the wall charger. will not charge in the car nor via usb and itunes or pc wont detect it ???

maybe there is some sort of fuse in the cabeling or the iphone its self. Does it have a charge bar on the lock screen when it is being charged. How old is the iphone that may be the problem

What is the audio throughput via usb on the new macbook air?

Similar Messages

Maybe you are looking for