What is the best way to make video and audio the same lengths for posting on Web?

YouTube recommends doing this to avoid sync problems. Maybe it will also make my videos run more smoothly. I'm talking here about random pauses I see in my movies on YouTube, not the uniform stuttering problem which I pretty much solved by redoing the movie at 30 fps instead of 24 fps. (Original is 18 fps Super 8 movie film.)
Anyway, there is no sound during my titles. The soundtrack starts about 17 seconds in, and ends when the ending titles begin. So what's the best way to add silent audio? The best I can figure is to take some existing sound, put it in where the titles are, and turn the volume down to zero. Seems real workaround-ish, so to speak, to me. It seems to work. I even cranked it up on headphones to make sure there was no residual noice. But I'm curious if there's a better way? No biggie if not.
Thanks.

I should have included the following:
1.) Why can't I make a silent project in GarageBand? I have to instead find a project with a long enough song, make an "iLife preview" of it (see (2) below), copy it from the iMovie Music and Sound Effects browser to the end of the movie, and then open the audio panel and turn the volume to zero. And all this so that video websites don't get confused by a soundtrack that starts in mid-movie.
2.) Why do I have to "render" them by the following process: Double-click a song in the iMovie Music and Sound Effects browser. You get a dialog box saying "The project "The Great Race" cannot be used because it was not prepared with an iLife preview. Would you like to open "The Great Race" in GB so you can save it with an iLife preview?" What I don't understand is why this new thing was introduced and why I have to do it via iMovie.

Similar Messages

What's the best way to sync video and sound?

If I'm going to make a music video with performance shots (lip-syncing) interspersed with story-line shots, what's the best way to line them up. I mean, I start with some video shot from a car while the song is playing, then transition to a shot of me singing. Say I get the singing clip lined up perfect, then when I add the transition, isn't that going to mess with the timing? And of course, I'll be doing this multiple times throughout the video. Say I get the first one right, then add some more storyline video and another performance clip and I lock that (second) clip to the audio. Isn't that going to shift my first performance clip when I add a transition? Am I making sense?

First look at all your material ..'review' it.
As you say so rightly: "..then when I add the transition, isn't that going to mess with the timing?.." ..yes; but only if you haven't allowed for the length of each transition when you first line up your clips.
So watch your footage, think where you want to cut it, and then immediately think "what kind of transition there, and for how long?" ..Imagine it, in your head, so if you think "that would work best with a quick two-thirds of a second dissolve" jot down that you want to leave an extra two-thirds of a second at the start of the clip which you want to transition into.
In the US of A, at 30 frames per second of NTSC video, two-thirds of a second is 20 frames. (..The frame counter gets up to 0:29 and then changes to 1:00, because the 30th frame changes it over to the next second..)
In Europe the frame rate is 25 per second - so after 0:24 comes 1:00 - so two-thirds of a second is about 0:16.
So when you start to cut your video clips, if you're going to have a two-thirds of a second dissolve between your first two, you'll need to leave an extra 20 (NTSC) or 16 (PAL) frames at the start of your second clip, before the action you want begins onscreen, so that those frames will be "eaten away" in the dissolve between the end of the previous clip and the start of the clip which follows it.
If you definitely want to see the last few frames of "lip-sync" - for some reason - of the first (outgoing) clip, then leave the extra frames on the end of that clip, instead of at the start of the following clip, but it usually works best to ensure that the follow-on clip starts with those extra "sacrificial" frames.
If you want to use any embedded audio that's in the video clips - and you're not simply matching up the video to external sound (..such as an iTunes track or your own material which you're pre-recorded..) then be sure to Extract the audio from your clips as soon as you've cut them, and before you apply any transitions. This keeps their audio safely "marooned" on an audio track, where you can edit it separately, and then match it to the edited video.
So prepare all your video first, and cut it to have excess "tops and tails" which you can eat away during the transitions. (The only transition which doesn't eat away material is iMovie's "Overlap", which freezes the outgoing clip, and dissolves the incoming clip into that freeze-frame. But that - in my opinion -doesn't look to good with music videos, because it freezes the flow of the video, and makes it seem too pointlessly 'jerky'.)

The external hard drive with my iTunes library on it died, but I have it backed up on another drive. What's the best way to make iTunes switch to the new drive for reference?

I've been through similar problems before and used the .xml file to restore the library, but is a better way of just changing the drive pathways in iTunes so it doesn't have to rebuild everything from scratch? I'm using a PC with Windows Vista.

Change the drive letter of the backup drive so it matches the one that died. If necessary move/rename the backup folder so that it matches the old path of the media folder.
tt2

The best way to import video in Edge Animate project?

What is the best way to add video and audio in Edge ANimate project?
Thanks
Ares

Hi,
Can you check out the answers on this forum thread, and let us know if it helped you?
Can I import video into Edge? (http://forums.adobe.com/message/4352262)
Thanks,
Preran

Fastest way to transfer video and audio from MacBook to TV?

Hello All,
Thanks for visiting my page. I would like to transfer video and audio from my Macbook mid-2010 (specs below), and would like to do so with minimum lag. I m aware Apple TV has a feature which allows me to do that, however considering it is connected via either wi-fi or bluetooth (not sure which) I feel streaming an HD movie or playing an MMO will cause significant lag and/or a distorted picture.
So with that said, what is the best way to transfer video and audio with minimal lag?
Also, as a part II of the question, will the picture be distorted regardless if my TV is 60 inches?
Thanks for the feed back!
Macbook Specs:
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software OS X 10.8.4 (12E55)

The easiest and most reliable option is to connect your Mac to the TV wired. Just buy a Mini DisplayPort to HDMI adapter and a HDMI cable to connect your MacBook to your TV. See > http://support.apple.com/kb/HT4241 Image and sound will appear on the TV automatically.
If the adapter and cable are OK, you won't get the picture distorted. Your Mac will try to use the maximum resolution the GPU allows in order to adapt the picture to your TV. It may not support the maximum resolution of the TV, but picture won't be distorted

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer do not seem to have the capacity. Thanks!

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer to the PC in the classroom do not seem to work because of the file size. Thanks! Quincy

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Whats the best way to stream videos?

whats the best way to stream video thru plumtree portal?What all it requires? (technology/application/server/plumtree development?)

Hello Kuljit,
For the windows platform you could set up Windows Media services. It can be configured to play all sorts of media files. I created a "radio station" portlet that multiple channels and from the portal I could select a drop down and the station would play that stream. I would make sure that media services are not being gatewayed and that anyone that can see your portal can see the videos. Here is my html that I made a portlet out of: This will not show the video window. You can increase the size of the object to show the video window with controls. Check out MSDN online for configuration of the <object>
<FORM NAME="streamForm"> <INPUT NAME="btnPlay" TYPE="Button" VALUE="Play" onclick="MediaPlayer1.controls.Play();"> <INPUT NAME="btnStop" TYPE="Button" VALUE="Stop" onclick="MediaPlayer1.controls.stop();"> <select name="musicGroup" onChange="changeStream()"> <option value="">-- Select --</option> <option value="barenakedladies">Barenaked Ladies</option> <option value="pinkfloyd">Pink Floyd</option> </select> </FORM>
<OBJECT CLASSID="clsid:6BF52A52-394A-11D3-B153-00C04F79FAA6" ID="MediaPlayer1" height="0" width="00"> <PARAM NAME="Name" VALUE="MediaPlayer1"> <param name="uiMode" value="invisible"> <PARAM NAME="TransparentAtStart" Value="true"> <PARAM NAME="AutoStart" Value="true"> <PARAM NAME="AnimationatStart" Value="false"> <PARAM NAME="ShowControls" VALUE="0"> <PARAM NAME="autoSize" Value="false"> <PARAM NAME="displaySize" Value="0"></OBJECT><script language="javascript">function changeStream(){ df = document.streamForm; if(df.musicGroup.selectedIndex != 0) { MediaPlayer1.url = "mms://MBRUCELT-W3k/"+df.musicGroup[df.musicGroup.selectedIndex].value; } }</script>
This works for the latest version of Window Media Player. The mms:// in my script is a call to Windows Media Services. That is the part that should be accessible from outside the portal.
HTH,
Michael [email protected]

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

What is the best way to make a DVD from iMovie

What is the best way to make a DVD from iMovie?
I am using iMovie 06 (Naturally) with iDVD 08. I have always used;
iMovie 06, File > Share to iDVD 08. And got pretty good results.
Some say the best way is to quit iMovie 06, open iDVD and import the movie from the Media button.
I have tried both methods in the results look the same. I'm interested in getting the very best quality possible.

You likely have one of the most expensive media converter boxes on the market today.
But does it work well with most macs? (my guess is that it does). But more specifically can it "handshake" with an intel based mac? I personally haven't tried it.
But you may want to read this for yourself if you haven't already:
http://discussions.apple.com/thread.jspa?threadID=1179361&tstart=2362
Assuming it works then the best format is .dv which this unit will support apparently.

What is the best way to format Videos for ipod touch?

What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

Visualhub is a transcoder with multiple input and output formats with specific setting for iPod,iPod touch. Costs around $19-used to work great but recently everything I convert suffers audio crash than closes out the player. Hopefully they will fix it.
Elgato H.264 hardware transcoder is $99 dollars(USB stick that plugs in to Mac)-speeds up encoding of any file quicktime can handle, settings for apple tv, iphone/touch, ipod,Sony PSP. Worth the cost if you transcode a lot of video for the Touch or own an elgato HD tuner. Files work flawlessly and look great.
Mpeg streamclip-free. Works great, has presets or can customize the output.

What is the best way to make a list of addresses for envelopes or labels? Address book, numbers or pages?

What is the best way to make a list of addresses for envelopes and labels? Address book, Pages or Numbers?

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

What is the best way to make a clickable grid

What would be the best way to make a clickable area that can
differentiate between discrete parts of the area when clicked on.
In other words, instead a having multiple buttons in a row that the
user can click on, is there a way to have an area that has lines to
distinguish the different areas(buttons) but that acts as though
there were multiple consecutive buttons?
For example, if I wanted to graphically simulate the buttons
on a phone but without using buttons. Instead use some kind of grid
or area that is divided into multiple sub areas that can
distinguish the discrete positions (each button on the phone, or
sub-area).
Thank you,
Salchichasa

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

With supervised ipads, what is the best way to transfer photos and videos from the ipad to the PC? Wireless transfer is not an option in our circumstances

With supervised ipads, what is the best way to transfer photos and videos to the PC? Wireless transfer is not an option in our circumstances.

There are only two ways of transfering things on the iPad.
- via WiFi
- via usb cable
From what I have read, you need to connect to iTunes on the supervising PC.
Robert

What is the best way to make a program fit different monitor resoultions?

In our lab all our test stations have 1280x1024 resoultion monitors. In the "other lab" all the test station monitors are 1440x900 resoultion.
Now I am tasked with making my programs run on the test stations in the other lab. I have tried setting the options "maintain proportions of windows for different monitor resoultions" and "Scale all object on front panel as the windows resizes" and of course neither one of these options really does what I would expect it to do.
What is the best way to make programs fit different monitor resoultions?

J-M wrote:
I resize the Front Panel when the program start to fit the monitor resolution. After that, I use the "SBE_Determine If Screen Resized.vi" from TomBrass (http://forums.ni.com/t5/LabVIEW/Resizing-controls-on-a-tab-control-within-a-pane/td-p/1520244 ). This vi is very useful if you don't want to monopolize the CPU with the "Panel Resize" event.
I don't like this function for a couple reasons. First for the example you don't need any custom code to handle the window resizing, just use a couple splitters. Even if you did need to handle the resize, you only resize after the mouse is up after the resize which is not how normal Windows programs work they resize as the mouse moves. So I modified the VI to resize objects as you resize the window. Then because doing this can generate 100 events very quickly, I use a boolean in a shift register to make sure that we only handle the resize event if there is no new resize events after 0ms. This essentially makes a lossy queue and handles the last resize event.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Resizable_Graph.vi ‏22 KB

What is the best way to make drawings an notes during class (on my iPad), which I can add to my (digital) handout later on?!

What is the best way to make drawings an notes during class (on my iPad), which I can add to my (digital) handout later on?!

Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
In the end I ended up having to power down the iMac.
Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

What is the best way to make video and audio the same lengths for posting on Web?

Similar Messages

Maybe you are looking for