What is the best way to trace an iFS session ?

Hi, can anyone tell me the best way to capture the sql generated
by an iFS session ?
I've tried using the traceLogger classes but can't get much out of them
( anyone have sample code for this ? )
Is the only way by looking in the database in v$sqlarea and using OEM tools
etc ?

I'll assume you really mean "blocked" as opposed to "denied". You can either create an event action filter and subtract the blocked action, or you can add the address to the "never block" addresses.

Similar Messages

What is the best way to close a communication session with the FP Server?

Looking at NI's FieldPoint Demobox.vi example, the session is closed by wiring the FP Refnum out from the FP Create Tag vi for the AI module to the FP Close vi. Is there any difference if the FP Refnum out from any or all of the other FP Create Tags were wired to FP Close vi/vi's? Could the FP Refnum out from the FP Open vi be wired to the FP Close vi? What is the best way to do this?
Also, as I'm new to FP and I'm conscious that I might swamp this forum with dumb questions, are the any sources of good FP code examples and/or discussions on coding techniques out there beyond the handful of NI's examples?
Thanks again,
Niel.

Niel,
The FP Open.vi provides a FP Refnum in the form of a data cluster. The cluster contains two elements; a server refnum and a tag refnum. Coming out of the FP Open, only the server refnum has a value, the tag refnum is created when the FP Create Tag.vi is processed. Thus all FP refnums in a process have the same server refnum but different tag refnums. The FP Close.vi uses the server refnum to close the server and ignores the tag refnum so it does not matter which particular refnum was used to close the server. The thing to be careful of is if you close on refnum, you close all refnums. At this point, any reads/writes/advises will result in error 32804 (Invalid IA handle specified).
Also, please swamp this forum with questions. I am in the process of reviewin
g the documentation and examples we provide and having a beginner asking questions that do not appear to be covered in our materials gives me an idea of what we are missing. I would ask that you upgrade to FieldPoint Explorer 2.0.4 and use the online help for LabVIEW since that has had some of my modifications added to it (program flow outlines, vi descriptions & use cases).
Regards, Aaron

What is the best way of dealing with an "implicit coercion" of an array to a sprite?

Hello everyone!
     With continued help from this forum I am getting closer to having a working program. I look forward to being able to help others like myself once I finish learning the AS3 ropes.
     I will briefly explain what I am trying to achieve and then follow it up with my question.
Background
     I have created a 12 x 9 random number grid that populates each cell with a corresponding image based on each cell's numeric value. I have also created a shuffle button that randomizes the numbers in the grid. The problem I am running into is getting my button-click event to clear the current images off the grid in order to assign new ones (i.e. deleting the display stack objects in order to place news ones in the same locations).
Question
     My question is this: what is the best way to handle an implicit coercion from an array to a sprite? I have pasted my entire code below so that you can see how the functions are supposed to work together. My trouble apparently lies with not being able to use an array value with a sprite (the sprite represents the actual arrangement of the grid on the display stack while the array starts out as a number than gets assigned an image which should be passed to the sprite).
============================================================================
package
import flash.display.MovieClip;
import flash.display.DisplayObject;
import flash.events.MouseEvent;
import flash.display.Sprite;
import flash.text.TextField;
import flash.text.TextFormat;
import flash.utils.getDefinitionByName;
public class Blanko extends MovieClip
      // Holds 12*9 grid of cells.
      var grid:Sprite;
      // Holds the shuffle button.
      var shuffleButton:Sprite;
      // Equals 12 columns, 9 rows.
      var cols:int = 12;
      var rows:int = 9;
      // Equals number of cells in grid (108).
      var cells:int = cols * rows;
      // Sets cell width and height to 40 pixels.
      var cellW:int = 40;
      var cellH:int = 40;
      // Holds 108 cell images.
      var imageArray:Array = [];
      // Holds 108 numerical values for the cells in the grid.
      var cellNumbers:Array = [];
      // Constructor calls "generateGrid" and "makeShuffleButton" functions.
      public function Blanko()
           generateGrid();
           makeShuffleButton();
// Creates and displays the 12*9 grid.
private function generateGrid():void
       grid = new Sprite;
       var i:int = 0;
       for (i = 0; i < cells; i++)
            cellNumbers.push(i % 9 + 1);
       trace("Before shuffle: ", cellNumbers);
       shuffleCells(cellNumbers);
       trace("After shuffle: ", cellNumbers);
       var _cell:Sprite;
       for (i = 0; i < cells; i++)
            // This next line is where the implicit coercion occurs. "_cell" is a sprite that tries
               to temporarily equal an array value.
            _cell = drawCells(cellNumbers[i]);
            _cell.x = (i % cols) * cellW;
            _cell.y = (i / cols) * cellH;
            grid.addChild(_cell);
// Creates a "shuffle" button and adds an on-click mouse event.
private function makeShuffleButton():void
       var _label:TextField = new TextField();
       _label.autoSize = "center";
       TextField(_label).multiline = TextField(_label).wordWrap = false;
       TextField(_label).defaultTextFormat = new TextFormat("Arial", 11, 0xFFFFFF, "bold");
       _label.text = "SHUFFLE";
       _label.x = 4;
       _label.y = 2;
       shuffleButton = new Sprite();
       shuffleButton.graphics.beginFill(0x484848);
       shuffleButton.graphics.drawRoundRect(0, 0, _label.width + _label.x * 2, _label.height +
                                            _label.y * 2, 10);
       shuffleButton.addChild(_label);
       shuffleButton.buttonMode = shuffleButton.useHandCursor = true;
       shuffleButton.mouseChildren = false;
       shuffleButton.x = grid.x + 30 + grid.width - shuffleButton.width;
       shuffleButton.y = grid.y + grid.height + 10;
       this.addChild(shuffleButton);
       shuffleButton.addEventListener(MouseEvent.CLICK, onShuffleButtonClick);
// Clears cell images, shuffles their numbers and then assigns them new images.
private function onShuffleButtonClick():void
   eraseCells();
   shuffleCells(cellNumbers);
   trace("After shuffle: ", cellNumbers);
   for (var i:int = 0; i < cells; i++)
    drawCells(cellNumbers[i]);
// Removes any existing cell images from the display stack.
private function eraseCells(): void
   while (imageArray.numChildren > 0)
    imageArray.removeChildAt(0);
// Shuffles cell numbers (randomizes array).
private function shuffleCells(_array:Array):void
   var _number:int = 0;
   var _a:int = 0;
   var _b:int = 0;
   var _rand:int = 0;
   for (var i:int = _array.length - 1; i > 0; i--)
    _rand = Math.random() * (i - 1);
    _a = _array[i];
    _b = _array[_rand];
    _array[i] = _b;
    _array[_rand] = _a;
// Retrieves and assigns a custom image to a cell based on its numerical value.
private function drawCells(_numeral:int):Array
   var _classRef:Class = Class(getDefinitionByName("skin" + _numeral));
   _classRef.x = 30;
   imageArray.push(_classRef);
   imageArray.addChild(_classRef);
   return imageArray;
===========================================================================
     Any help with this is greatly appreciated. Thanks!

Rothrock,
     Thank you for the reply. Let me address a few things here in the hopes of allowing you (and others) to better understand my reasoning for doing things in this manner (admittedly, there is probably a much better/easier approach to what I am trying to accomplish which is one of the things I hope to learn/discover from these posts).
     The elements inside my "imageArray" are all individual graphics that I had imported, changed their type to movie clips using .Sprite as their base class (instead of .MovieClip) and then saved as classes. The reason I did this was because the classes could then be referenced via "getDefinitionByName" by each cell value that was being passed to it. In this grid every number from 1 to 9 appears randomly 12 times each (making the 108 cells which populate the grid). I did not, at the time (nor do I now), know of a better method to implement for making sure that each image appears in the cell that has the corresponding value (i.e. every time a cell has the value of 8 then the custom graphic/class "skin8" will be assigned to it so that the viewer will be able to see a more aesthetically pleasing numerical representation, that is to say a slightly more fancy looking number with a picture behind it). I was advised to store these images in an array so that I could destroy them when I reshuffle the grid in order to make room for the new images (but I probably messed up the instructions).
     If the "drawCell" function only returns a sprite rather than the image array itself, doesn't that mean that my "eraseCells" function won't be able to delete the array's children as their values weren't first returned to the global variable which my erasing function is accessing?
     As for the function name "drawCells," you have to keep in mind that a) my program has been redesigned in stages as I add new functionality/remove old functionality (such as removing text labels and formatting which were originally in this function) and b) that my program is called "Blanko."
     I will try and attach an Illustrator exported JPG file that contains the image I am using as the class "skin7" just to give you an example of what I'm trying to use as labels (although it won't let me insert it here in this post, so I will try it in the next post).
Thank you for your help!

What is the best way to do an upsert

Hi all,
I am new to transaction system. Need help on a requirement.
We have a requirement where we have to do an update else insert into a table.
The input data comes from a file and the number of rows should be around 100000 at a time.
The table may contain around 5 million rows. We have to search the table based on nine columns.
What is the best way to do it?
1. A merge or update statement takes hours to complete.
2. Is there any way we can improve the performance? I have tried using index on the nine columns of the table, but the merge statement doesn't use the index, although I am not sure creating an index is going to help here.
Thanks.

2. Is there any way we can improve the performance?Possibly, but first you need to identify where time is actually being spent.
Personally I would start by using separate UPDATE & INSERT statements &
the SQL_TRACE=TRUE & then process trace file using TKPROF

What's the best way to deal with floating point errors?

What's the best way to deal with the decimal number errors in Flex?
Lets say I have:
var number1:Number = 1.1;
var number2:Number = 1;
var result:Number = number1 - number2;
trace(result);
I get "0.10000000000000009".
What's the best way to deal with this so that i get the right result?
Using the trick: result = Math.round( result * Math.pow(10,13) ) / Math.pow(10,13); is not useful as such when using big numbers.
For example, If number1 = 100000000001.1, and number2 = 0.2, I get "100000000000.90001" as result. The previous rounding fixes rounding errors after 13th decimal, but here the first rounding errors come after 4 digits.
The toPrecision method in Number and NumberFormatter dont seem be of use by themselves because of the same reason.
So I'd have to check how big the number is, and then round the number based on that.
So far I've constructed a method that does that with logarithms like this:
public function floatFix(number:Number):Number{
      var precision:int = 14-Math.floor(Math.log(Math.abs(number))*Math.LOG10E);
      var precisionFactor:Number = Math.pow(10, precision);
      return Math.round(Number(number*precisionFactor))/precisionFactor;
It just seems rather odd that one would have to create and use something like that to just count 1.1-1; There's a lot of calculating in that method, and i'm guessing that having to use that in a loop could slow down a program quite a bit.
I think there really should be a pre-built method in flex for something like this, but I can't find any.
Anyone know any better/faster ways?

Use the application server database pooling services to create a datasource that can be access using JNDI.
Move the database access code to a Servlet so that a JSP submits a form to the Servlet that does the database access and packages the data into a bean which is passed to another JSP to be displayed.

What's the best way to detect that text fits into ContainerControllers without scrolling?

Hi.
Question
What's the best way to detect that text typed by user (or added programmatically) exceeds available container space and find out where starts truncated part? Is there available some other (than described bellow) easy way to detect it or disallow set of controllers to receive more characters that can be displayed in given composition area?
My partialy failed attempt (simplified)
For example lets say that I've got an editable textflow with attached two instances of ContainerController.
var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
    firstController = new ContainerController(firstSprite, 100, 30),
    lastController = new ContainerController(secondSprite, 600, 30);
flow.interactionManager = new EditManager(new UndoManager());
flow.flowComposer.addController(firstController);
flow.flowComposer.addController(lastController);
flow.flowComposer.updateAllControllers();
With enabled vertical scroll policy I can compare height of the composition in last controller with height of the content:
var bounds:Rectangle = lastController.getContentBounds(),
    overflow:Boolean = lastController.compositionHeight < bounds.height;
trace('Content does not fit into given area?', overflow)
But when I switch vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF) - unfortunately this no longer works...(In my case scrolling should be dissabled, since text areas might have only one line with restricted width)
Use case
I want to create fillable form. Field might have a single or multiple lines. One field might start in the middle of the page, continue in the next line where it spreads through whole page and end in the - quarter of page width long - third line. Text typed by the user can't exceed given area since it might cover some static text that sits right after/below field.
Something like ascii image bellow:
|                <PAGE>                    |
|                                          |
|                                          |
|                                          |
|               [Field starts here........ |
| ........................................ |
| ........................................ |
| Ends here..]                             |
|                                          |
|                                          |
| [Another field] xxxx xxxx xxxxxxxx x xx |
| xxxxxxxxxxxxxxxxxxx                      |
|                                          |
|                              [One more.. |
| .....]                                   |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
Info:
[......] <-- form fields starts with '[' character, and ends with ']'
xxx       <-- sample, static text
| and _   <-- page borders

I've tried something like that previously, but it didn't work because then I've got vertical scroll policy to set to 'auto'. After changing verticalScrollPolicy to ScrollPolicy.OFF in the last container it worked like a charm.
Thanks zhen bian

What is the best way to send a file?

i am writing a program and i want to transfer a file from a client class to a server class... what is the best way to do that?
convert the file to bytes using the following
File file=new File("jobs.xml");
           byte buffer[]=new byte[(int)file.length()];
           try {
                BufferedInputStream input=new BufferedInputStream(new FileInputStream("jobs.xml"));
                input.read(buffer,0,buffer.length);
                input.close();
           } catch(Exception e) {//DIORTHOSE TA MSGS
              System.out.println("reading jobs.xml->buffer: "+e.getMessage());
              e.printStackTrace();
           firstServerRef.translationService(theCallbackObjectRef, buffer);for a reason i dont like that i am reading the file again to put it in the buffer and send the buffer... are my worries reasonable or not? is there any other better way to do that?

Use a smaller buffer, repeatedly read and
write, and print the exception's stack trace.
What do you mean by reading again, by the way? I only
see you reading the file once.hmm you mean use a smaller buffer and call the function with the smaller buffer many times in a while?
the client and the server are not on a single machine and i want to call the function only once... could you clarify the thing that you said..
yes you are correct that you see only one reading because i haven't pasted the rest of the code which is sth like...
FileWriter fw = new FileWriter("jobs.xml");
           ObjectOutputStream out = xstream.createObjectOutputStream(fw);
     //      out.writeObject(new Jobb("ougk2", "Walnes",null));
          for(int i=0;i<nameOfServices.length;i++){
               Jobb translationJob=new Jobb();
               //find the service !
             NameComponent nc = new NameComponent(nameOfServices, " ");
// Resolve the object reference in naming
NameComponent path[] = {nc};
//create a ref for the servant of the service
ServiceOperations theRemoteObjRef = ServiceHelper.narrow(ncRef.resolve(path));
// JobOperations theRemoteObjRef = JobHelper.narrow(ncRef.resolve(path));
translationJob.setObjServerRef(theRemoteObjRef.toString());
if(i==0){ //this is the first job
     translationJob.setForTranslation(wordForTranslation);
     firstServerRef=theRemoteObjRef;
     out.writeObject(translationJob);
     out.close();
     File file=new File("jobs.xml");
          byte buffer[]=new byte[(int)file.length()];
          try {
               BufferedInputStream input=new BufferedInputStream(new FileInputStream("jobs.xml"));
               input.read(buffer,0,buffer.length);
               input.close();
          } catch(Exception e) {//DIORTHOSE TA MSGS
     System.out.println("reading jobs.xml->buffer: "+e.getMessage());
     e.printStackTrace();
          firstServerRef.translationService(theCallbackObjectRef, buffer);
which i believe is bad....

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

HT1349 I lost/had my iPhone stolen. Tried using Find My iPhone and it's offline. It was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526

What is the best way to read and manipulate large data in excel files and show them in Sharepoint

Hi ,
I have a large excel file that has 700,000 records in it. The excel file has a few columns that change every day.
What is the best way to read the data form the excel file in fastest and most efficient way.
2 nd Problem,
I have one excel file that has many rows each row contain some data that has certain keywords.
What I want is to segregate the data of rows into respective sheets(tabs ) in the workbook.
for example in rows have following data
1. Alfa
2beta
3 gama
4beta
5gama
6gama
7alfa
in excel
I want there to be 3 tabs now with each of the key words alfa beta and gamma.

Hi,
I don't really see any better options for SharePoint. SharePoint use other production called 'Office Web App' to allow users to view/edit Microsoft Office documents (word, excel etc.). But the web version of excel doesn't support that much records as well
as there's size limitations (probably the default max size is 10MB).
Regarding second problem, I think you need some custom solutions (like a SharePoint timer job/webpart ) to read and present data.
However, if you can reduce the excel file records to something near 16k (which is supported rows in web version of excel) then you can use SharePoint Excel service to refresh data automatically in the excel file in SharePoint from some external sources.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Custom Report : What is the best way ?

Hi!
My customer doesn't like native TestStand 's report layout. He would prefer something like the example enclosed to this post.
What is the best way to achieve this ?
XSL customizing (seems heavy work) ?
Using the report generation toolkit and a Word template ?
Any other idea ?
Attachments:
Report Style.JPG ‏115 KB

Have you examined all of the examples found in the TestStand help:

I have an old 30" apple cinema display (2005) I want to use as a 2nd monitor to a new iMac (2012). I don't just want mirror image of iMac; what's the best way to do this?

I have not bought the iMac yet but will do so very soon and just want to make sure I have what I need to get everything setup including adding the old faithful 2005 30" cinema display. Currently I am driving the old 30" cinema display with a macbook pro also purchased 2005 and happy to say I got a lot of good miles out of this rig. What's the best way to connect the old 30" monitor as a second display for the new generation iMacs?
Other Questions
I can find online new in unopened box a 2012 iMac 27" i7 with 1T Fusion Drive for $1899 no sales tax. This seems like a pretty good deal since I notice the same is available from Apple refurbished for $100 more plus sales tax. I know that they say the Fusion drive is a lot faster on 2013 models but some of the speed tests I reviewed online showed the 2012 i7 and 2013 i7 very close on speed for both storage and processing. Any thoughts?
I don't like changing batteries so I would buy a separate Apple keyboard with numeric pad since it only comes with wireless keyboard. I'm a trackpad enthusiast having been using my macbook pro trackpad with current set up; and I am prepared to buy the Apple trackpad and replace batteries every 2 months but I would greatly prefer USB connection and rechargeable trackpact. I know Logitech makes one so if anyone is using and knows how it compares to Apple's I'm all ears.

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?
Facts:
In moving to a new iMac, I copied the iPhoto library to an external HDD assuming that I would point the new iMac to the backed up iPhoto Library
All worked fine when I pointed the new library but noticed that some folders contained aliases and not the original file. So when I attempt to open that photo it can't find it because the alias is pointing to another drive.
I do have all original photos from a couple of external HDDs. In the folders titled, "Originals" (from older versions of iPhoto) and "Masters" (from current iPhoto)
I'm thinking I can create a new folder and drop the original files and make that my new iPhoto library. Is there a better way to rebuild my library? I do not want to create any future aliases.
Thanks in advance for any help!

do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

What is the best way to open a HTTPS connection?

What is the best way to open a HTTPS connection and retrieve the content as XML? This is how most of the online API is done nowadays, how can this be done on the iphone SDK?
Thanks

Have a look at the SeismicXML example that comes with the iPhone SDK. It uses http instead of https but it may work for you.
You can also look at the NSURLRequest and NSURLConnection classes.
Enjoy.

What is the best way to trace an iFS session ?

Similar Messages

Maybe you are looking for