What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

Similar Messages

  • On my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ?

    on my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ? I am never sure the back up is working. It checked the owner manual but did not find what I need. Can someone give mt the step by step "how to" help so That I know everything is completely backed up to i cloud
    thank you
    olefuzz0115

    Are you plugging in every night, locking the iPad and connected to WiFi? Are you meeting all three requirements?
    Well that is what I do and it works for me because I can see the next day that the new backup shows in Settings>iCloud>Storage and Backup>Backup Now. If you look at my screenshot - you will see that I experimented to make sure that it would work. I responded on July 3 at 12:24 PM when you posted. Then I locked the iPad, plugged it in and waited for about 30 minutes before I unlocked the iPad to see if it backed up. The screenshot shows the backup was completed at 12:44 PM on July 3.
    I also backup with iTunes and I almost never auto backup. I just initate the back up on my own. But the instructions that I posted are right from the settings. You can read it for yourself in the screenshot.
    You do have to wait for at least 24 hours before the next backup will take place, but if you are getting a message that you haven't backed up a week later, I can't explain that.
    Dont trust that message. Look and see what the date of the last backup was. That's the only way to know for sure.

  • What is the correct procedure for upgrading to aperture 3.4

    I am working in South Sudan and am shortly going to be in a place where I can download all the updates. The last time I did an update was around 2 weeks ago.
    I presume that there will be updates for Mountain Lion, iPhoto and Aperture, plus a whole pile of iOS updates. From the support questions I see that there is a number of people having problems.
    I presume that the first thing to do will be to rebuild the library of aperture.
    What is the correct procedure after that?

    If I do an upgrade through AppStore, and find it does not work, do I uninstall first by removing to trash? What do you mean by revert to an earlier version, and which previous version of Aperture should I use.
    Neville,
    So you did buy Aperture from the AppStore?
    Then move the Aperture application to the Trash, but do not empty it, just in case
    Sign into the AppStore and reinstall. In this case you do not need to revert to an earlier version. If the AppStore installer does not find an Aperture in your Applications folder, it will have to make a full install, and no incompatible frameworks should remain, as is the problem with the partial upgrades right now.
    Yes, I have a bootable clone,
    And have you checked, if you really can boot from your clone? Just being very cautious.
    Do you use facebook? Some posters are having problems, even after reinstalling, if the want to publish to Facebook. Post back, if you encounter that problem.
    Good Luck
    Léonie

  • Update my app. What is the correct procedure for updating an app/folio?

    I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

    no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
    ... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

  • What is the correct wording to connect to an SQL Server Express 2014 database?

    I am connecting to an Access 2007 database:
    oleConnection = new OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\\...\\Db.accdb");
    What is the correct wording to connect to an SQL Server Express 2014 database?
    bhs67

    Hello,
    Please make sure you change RemoteServer with the computer name of the intended SQL Server server.
    Make sure the SQL Server instance have enable TCP/IP and Named Pipes protocols. Use the following article to enable them:
    http://msdn.microsoft.com/en-us/library/ms191294.aspx
    Start SQL Server Browser Service using SQL Server Configuration Manager.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • What is the correct adapter to connect my Macbook pro with mini-dvi to my TV with Scart

    I have a MacBook Pro with mini-DVI and I want to connect it to my TV which has only a scart thing.
    Can I use the mini-DVI to Video-Adapter and then a Video to Scart-Adapter?
    Thanks for your help!

    So of course you've corrected the title : "What is the right PLUG to connect my macbook pro to my TV ?"
    OK so a bit more info : my TV is a Sony Trinitron TV.
    It has the yellow/red/white plugs. I don't believe it has anything more sophisticated or recent than that.
    Thanks for your help !

  • VT01N: what is the correct  procedure for creating shipment

    Hi Gurus ,
    Please tellme the correct  procedure for creating shipment  in VT01N   with respect to the  Sales order  no .  there  are  deliveries and ohter  sceens what to do  first .
    Regards, Jaspal

    Hi Jaspal,
    Procedure for creating shipment sequence goes as:
    <b>Shipping Processing and Analyses</b>
    Shipping activities.
    Deliveries.
    Picking and confirmation.
    Packing.
    Goods issue.
    Collective processing.
    Shipment.
    Billing.
    Sales Information System.
    Standard analyses.
    Backorder processing.
    Sales and distribution documents.
    Functional analyses.
    Planning.
    Pls refer the link:
    http://www.sap-img.com/sap-sd.htm for more details.
    Regards,
    Hemachandra K S

  • What is the difference between dropping-connection and reset?

    Hi, Im currently studying HTTP MPF (ASA feature) ,
    im just wondering about the difference between dropping-connection and reset (TCP)
    can you please tell me how it drop and how it reset ? ?? specific process of it ( eg, TCP handshake, etc)
    thanks in advance. !

    Reset sends a tcp response with the rst flag set. Drop sends no response.
    Sent from Cisco Technical Support iPad App

  • What is the correct URL to connect to my Sqlbase DB

    I have a simple little application that is attempting to connect to a Sqlbase DB on my Windows 95 PC. The Java2 SDK version 1.3.01_01 is installed on my C:\ drive as well as the Sqlbase driver and my class file. The Sqlbase DB is on the D:\ partition of my hard drive. At first, I was having problems loading the driver using Class.forName, but that seems to be OK now (after fixing my classpath setting.) I am now getting the following error when running the program:
    SQLException: SqlbaseSession(): failure to connect to host:
    I assume the problem is with my URL string, but I'm not sure what the string should be. The database name is "EPDMO" and I can log on to it through SqlTalk using "connect EPDMO SYSADM/SYSADM". Any suggestions are appreciated.

    Correction:
    The error message is:
    SQLException: SqlbaseSession(): failure in connection to host!
    I get the following message if I put anything other than "localhost" in the URL:
    SQLException: SqlbaseSession(): failure to connect to host:

  • What is the correct procedure to follow after restoring a Mac from a Time Machine Backup?

    Hi all,
    I did a Time Machine backup of my entire system (Time Machine Backup 1) before bringing my Macbook Pro to the Apple Store to to have it tested.   After the TM backup I wiped the laptop leaving only the OS (Mountain Lion) on it so that I could determine whether the problems with my system were hardware or software related. The computer passed all tests.
    After bringing my Macbook home I did a fresh intall of all the software and everything worked fine.  At this point I did another Time Machine backup (in the same location as the previous backup) so that if I ever had problems with my system I could revert to this working backup (Time Machine Backup 2.0).  I used my laptop without issue and created a number of new documents.  I did not transfer the documents from the previous time machine backup (Time Machine Backup 1).  As time progressed I did regular Time Machine backups (backups 2.1 etc.) installed a few new pieces of software and started having system issues again. 
    At that point I did another Time Machine backup (in the same location as the previous backups) (Time Machine Backup 3) so that my new documents would be safe.  At this point I could see all of my TM backups in finder.  Then I used Command + R while booting up and restored my system from what I thought was the clean backup (Time Machine Backup 2).  In fact it the TM backup I used was not the correct backup (It was one of the backups between 2.0 and 3 and I needed to go back further).  I was concerned, at this point, because I did not (and still do not) know what type of effect restoring the system from an old Time Machine backup would have on the Time Machine structure going forward  I was unsure whether doing so and having an "old" system backed up might break the structure so I stopped Time Machine from running a new backup. 
    When I attempted to look for one of the older versions of the Time Machine backups I discovered that there were no longer any listings for TM backups in their previous location.  In fact, the only thing I could see was one line in the place where the multiple backups were previously.  I took my laptop and NAS (where the TM backups were stored) to the Apple Store and the "genius" said something about the TM backup being "parsed"?  He also described it as a "broken window" and he "sees the broken glass but has no idea how it broke".  He also said "neither he nor anyone at Apple would be able to assist me" and that I'd have to go to a data recovery place.
    Fortunately I did use a second drive to backup the original system (Backup 1) but I really don't want to lose the files created ater Backup 2 / prior to Backup 3.
    Does anyone know what happened / how I can get my Time Machine backups back without forking out tons of cash?
    thanks
    John
    OS ML 10.8.4, Macbook Pro Retina
    Synology DS412 (time machine backup to a file folder)

    I actually already checked Pondini's and didn't find the answer.  Any other suggestions?
    thanks

  • What is the correct procedure to install a TCS application not included in the initial installation?

    I can go through the installation procedure to the point when I've switched to the 2nd DVD. Setup resumes and a few seconds later states that no application was installed.
    I'm adding Captivate to my initial installation of FM9, Acrobat9 and Photoshop. I'm not uninstalling them first. Should I? Why?
    The initial installation was a year ago. The OS is Windows 7.
    TIA
    Douglas

    On 06/01/2011 10:12 PM, Jeff_Coatsworth wrote:
    So you already have TCS2 but didn't install the full suite the first time around? So now you just want to add Captivate? I believe in that case you just select it off the list. The installer skips all the ones that you haven't selected and only does the one you have. I think Captivate is on the 2nd DVD (at least it was on the TCS2.5 upgrade one I got), so you may have to start with that one first.
      Yes, I just want to add Captivate. I've been successfully doing the  canonical installation (DVD1 > setup (autoplay wouldn't work due  according to the error message to a  Unicode error in the lang.dat file)  up to the switch to DVD2.
    As far as starting from DVD2 is concerned, there's no setup file on it  to launch. So that route is out.
    Another option (because some have reported issues with installing from DVD) is to copy the contents of both DVDs to a temp folder on your hard drive and start the install from there.
      Copying DVD2 to the HD might be a solution. Unless data is somehow  corrupted on DVD2, but in that case, why did the original installation  succeed?
    Thanks again for your prompt answers.
    Best regards,
    Douglas

  • What is the proper procedure dor uninstalling and reinstalling CS5 extended?

    I downloaded some trial plugins and then removed them and ever since, CS5 is not working well. Sometimes when I open it and go to file open to open an image, everything is grayed out and I have to close down and re-launch. When I open an image and want to look at the file info, everything freezes and I have to use task manager to close down photoshop. As well, my bridge is not working correctly. I want to uninstall and then reinstall, but I thought that somewhere that I read there are specific ways to do that or else the program thinks you're trying to load it on another computer..? Thanks for any help and dircetions/instructions that you can give me.
    CAnn12

    As a test, and perhaps an alternative to Uninstallin and Reinstalling PS CS 5, if you are on a PC, check to see if you have a System Restore Point, prior to the installation of those trials. If you do, then first - create a new System Restore Point for today, and then boot to Safe Mode. There, you should be presented with the option to Restore the System. Navigate to that System Restore Point, prior to the trails, and choose it. The system will then ask to be rebooted, after a few moments. Do so, and then test PS. Does that fix things?
    On a Mac, I think that the equivilent of System Restore is something like Time Machine, but do not know if that is part of the Mac OS, or an add-on product.
    Good luck,
    Hunt

  • What is the correct Procedure for all of this?

    I'm on a Mac with latest Mavericks OS  and Latest Aperture 3.5.1
    I moved around a lot of Projects and added to them and deleted some.
    I want to replace my Photo internal hard drive with a new one
    I want to replace my external hared drive that has my Vault on it that is now too small with a 1TB hard drive.
    I  haven't done anything with the library like restoring it and done nothing with the Vault since my current external hard drive is now too small. One big mistake I made was I have a folder with folders in it on my desktop 37 GB of images That I added to Aperture If I now drag that folder and all it's internal folders to my Photography internal hard drive will the link to them be broken?
    I would also like to rename my Vault and Library since they have old dates in there name.
    Thank You

    One big mistake I made was I have a folder with folders in it on my desktop 37 GB of images That I added to Aperture If I now drag that folder and all it's internal folders to my Photography internal hard drive will the link to them be broken?
    Have imported that folder to Aperture as referenced images? Then don't move the images in this folder using the Finder, but let Aperture relocate the original image files in this folder to your new drive.  Select all referenced images in Aperture in the browser and use the command "File > Relocate Originals" and select a destination folder on your new drive.
    See this manual page:  Working with Referenced Images
    To move the library itself, just drag it to the new drive and then double click the copy  to open it in Aperture.
    As to the vault - it is essentially an aperture library, but it might be easier to let Aperture create a new vault on a replacement drive, then to copy the vault over.
    -- Léonie

  • What is the best way to load and convert data from a flat file?

    Hi,
    I want to load data from a flat file, convert dates, numbers and some fields with custom logic (e.g. 0,1 into N,Y) to the correct format.
    The rows where all to_number, to_date and custom conversions succeed should go into table STG_OK. If some conversion fails (due to an illegal format in the flat file), those rows (where the conversion raises some exception) should go into table STG_ERR.
    What is the best and easiest way to archive this?
    Thanks,
    Carsten.

    Hi,
    thanks for your answers so far!
    I gave them a thought and came up with two different alternatives:
    Alternative 1
    I load the data from the flat file into a staging table using sqlldr. I convert the data to the target format using sqlldr expressions.
    The columns of the staging table have the target format (date, number).
    The rows that cannot be loaded go into a bad file. I manually load the data from the bad file (without any conversion) into the error table.
    Alternative 2
    The columns of the staging table are all of type varchar2 regardless of the target format.
    I define data rules for all columns that require a later conversion.
    I load the data from the flat file into the staging table using external table or sqlldr without any data conversion.
    The rows that cannot be loaded go automatically into the error table.
    When I read the data from the staging table, I can safely convert it since it is already checked by the rules.
    What I dislike in alternative 1 is that I manually have to create a second file and a second mapping (ok, I can automate this using OMB*Plus).
    Further, I would prefer using expressions in the mapping for converting the data.
    What I dislike in alternative 2 is that I have to create a data rule and a conversion expression and then keep the data rule and the conversion expression in sync (in case of changes of the file format).
    I also would prefer to have the data in the staging table in the target format. Well, I might load it into a second staging table with columns having the target format. But that's another mapping and a lot of i/o.
    As far as I know I need the data quality option for using data rules, is that true?
    Is there another alternative without any of these drawbacks?
    Otherwise I think I will go for alternative 1.
    Thanks,
    Carsten.

Maybe you are looking for