What is the correct URL to connect to my Sqlbase DB

I have a simple little application that is attempting to connect to a Sqlbase DB on my Windows 95 PC. The Java2 SDK version 1.3.01_01 is installed on my C:\ drive as well as the Sqlbase driver and my class file. The Sqlbase DB is on the D:\ partition of my hard drive. At first, I was having problems loading the driver using Class.forName, but that seems to be OK now (after fixing my classpath setting.) I am now getting the following error when running the program:
SQLException: SqlbaseSession(): failure to connect to host:
I assume the problem is with my URL string, but I'm not sure what the string should be. The database name is "EPDMO" and I can log on to it through SqlTalk using "connect EPDMO SYSADM/SYSADM". Any suggestions are appreciated.

Correction:
The error message is:
SQLException: SqlbaseSession(): failure in connection to host!
I get the following message if I put anything other than "localhost" in the URL:
SQLException: SqlbaseSession(): failure to connect to host:

Similar Messages

What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

What is the correct wording to connect to an SQL Server Express 2014 database?

I am connecting to an Access 2007 database:
oleConnection = new OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\\...\\Db.accdb");
What is the correct wording to connect to an SQL Server Express 2014 database?
bhs67

Hello,
Please make sure you change RemoteServer with the computer name of the intended SQL Server server.
Make sure the SQL Server instance have enable TCP/IP and Named Pipes protocols. Use the following article to enable them:
http://msdn.microsoft.com/en-us/library/ms191294.aspx
Start SQL Server Browser Service using SQL Server Configuration Manager.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

What is the correct adapter to connect my Macbook pro with mini-dvi to my TV with Scart

I have a MacBook Pro with mini-DVI and I want to connect it to my TV which has only a scart thing.
Can I use the mini-DVI to Video-Adapter and then a Video to Scart-Adapter?
Thanks for your help!

So of course you've corrected the title : "What is the right PLUG to connect my macbook pro to my TV ?"
OK so a bit more info : my TV is a Sony Trinitron TV.
It has the yellow/red/white plugs. I don't believe it has anything more sophisticated or recent than that.
Thanks for your help !

What are the correct settings to connect to my network?

All attempts to connect fail with the message to check my settings. I need to know what settings are faulty. There is no way to obtain the answer from the manual as far as I can see.

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

My ical will not sync with iphone and ipad since I've been using icloud. It says URL is incorrect. But what is the correct one and where do I input that to enable all calenders to sync on all devices?

What is the correct URL for my ical on my MacBook so that all devices will have the same information? And how/where do I update that?
Thank you.

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

What is the correct firmware update check URL for a Westell VersaLink 327W?

Hi, I was wondering what the correct URL is for the modem to check for updated firmware on the Westell VersaLink 327w. My model is the D90-327W15-06 and its current firmware is 04.04.03
To clarify, I'm looking for the URL that goes in the box at the top of the upgrade page in the router's advanced settings. That link is a screenshot of what my page currently looks like.
Since I first got this modem 2 or 3 years ago, it has never been able to properly check for updates. I've tried changing the URL to point to the Verizon support page for manually downloading the firmware but that doesn't seem to work either. I'm guessing the URL should point to a specific file, possibly an xml or something? I don't remember what the original address in the box was but it didn't work anyway.
I'm pretty sure I am running the latest version (04.04.03) and manually upgrading isn't a problem if a new version comes out but its always bugged me that the built-in check has never worked right for me so I figured I'd ask on here for the heck of it. At the very least I'd like it to be able to check version information even if it can't upgrade automatically.
Does the built-in firmware check work for anyone else using the 327w or similar model? If so, could you kindly copy/paste the URL on your modem's firmware page? Even if you have a different modem, it might help me figure out the right address for my own. Thanks!

#1 Go to http://www.verizon.net/central/vzc.portal?_nfpb=true&_pageLabel=vzc_help_contentDisplay&linkflag=use...
#2 Make sure that use save as.
#3 After you save the file, go into your router's upgrade screen.
#4 Then use the file that you downloaded earlier to upgrade the router..
If you have any questions as how to do this..
#1 Be sure to take screen shots.
#2 And be sure that you use tinypic.com as your image host.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

What's the correct behavior in Win8.1/Win10, when VOIP is conecting and then press Power to enter into connect standby?

what's the correct behavior in Win8.1/Win10, when VOIP is conecting -> then press Power to enter into connect standby? does VOIP need disconnect after press power key?
test steps is :
1). Start VOIP call with Metro Skype in win8.1 or win10.
2). System enter Connect standby (by press power button)during VOIP establish by Skype or LYNC.
does VOIP need disconnect or still in connection? what's the correct behavior in win8.1/win10.

Hi wangjingz,
From your post, it would be better ask this to the WDK and driver development forum. This forum discuss application compatibility testing, common compatibility issues, and best practices for creating Windows-based applications. So your post is off
topic here. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find out what server the outlook client is connected to/change it automatically

Hi,
I am performing a server migration from Exchange 2010 to Exchange 2010 (the previous installation was installed by an outsourced provider and is rubbish so I'm configuring it properly). On the of things the existing server lacks is a CAS array configured,
so I have built the new Exchange 2010 server, configured a new DB and CASArray. I have created a brand new mailbox for a new user and the user's outlook shows it is connected to casarray.domain.local, I have migrated my own mailbox but internally my outlook
shows it is connected to oldserver.domain.local (under the account settings when you go to change the settings for the account), this is on a domain joined internal desktop. But at home on my personal laptop non-domain joined, it has appeared to reflect the
new casarray.domain.local. The outlook client is 2007 in both situations.
When I run the following command, it shows my mailbox is indeed connected to the new exchange server, but this is not true in outlook
Get-LogonStatistics -Server "new-exch2010" | where {$_.clientname -eq "new-exch2010"}| ft username,servername,clientname
If I run the above command against the old server my name shows on that list as well. When I look at the connection status of my outlook it shows that it is connected to casarray for directory, but the old server for mail.
A couple of other things:
Mailflow is now going to the new exchange server from the gateway over port 25, the autodiscover record in the internal DNS is now also pointing to the new exchange server, outlook clients and users computers have been completely restarted but still don’t
seem to pick up the new settings, both the old server and new server functions as a multi-role exchange having the Hub, CAS and MBX roles.
Now that you have all that background info my question is two parts:
What is the correct powershell command I can run on the exchange server to ensure that all my outlook clients are connected to the new exchange server for all connection types (or identify those which are connected against the old server)?
How do I get the outlook clients to automatically pick up the casarray servername once their mailboxes have been migrated?
I am considering removing the CAS from the old server which may force outlook to find it’s new server but am unsure whether this will work or not, and I think I should migrate all the mailboxes into the new DB before I do this.
Other than that, I am out of ideas.
Appreciate, any help. Thanks
Steve

I had already run the command Get-MailboxDatabase | FL Identity,RpcClientAccessServer
and it only identified the old database as being tied to the server name, the new database has the correct casarray and all mailboxes are in this new database. should I also set the old database to point to my casarray as the second command indicates? can't
do any harm right?
also, I have outlook 2007 and 2013 at home and both of them had automatically reconfigured
themselves to point to casarray, my problem is with the internal clients.
today I have also noticed in DNS there is a Zone which points to autodiscover.domain.co.uk
and in there it points to my old server.
a few things to note about the above:
1. the zone is pointing to the .co.uk domain not the .local - is this correct?
2. should that zone even be in our internal DNS, i hadn't noticed on previous implementation
of Exchange I have done
3. if i change the record within that zone to point to my new server, will this likely show
up the popup message shown in this link http://www.rackspace.com/apps/support/portal/1218 I havent yet got a certificate for the new exchange server (few more days) and i dont want users seeing any kind of untrusted unsecure connection box or it
will only lead to panic and flooding the helpdesk
many thanks
Steve

What is the best way to connect a firewall cluster to a VPC domain

Hi All
Can anyone help me decide what is the best way to connect a firewall cluster to a VDC running in a pair of N7K's which is a VPC domain?
Can I configure a VLAN interface on each VDC and use HSRP? I was planning on presenting one 10GB cable from each VDC to each firewall. Would this work OK? HSRP traffic will go across the VPC peer link correct?
thanks all

No, but the one caveat is vpc orphan ports. If the vpc link between the nexus switches fails for any reason, all the vpc ports on the vpc secondary switch will be forced down. So it's recommended to connect single port devices to the primary vpc switch so the connections stay up. But if you're ok with that, then I don't see any problems.
You have a few options, one would be to run a separate link between your nexus switches for non-vpc vlans. These vlans would not be allowed over the vpc peer-link, or forwarded out vpc's.
See here page 49 :
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf

After deployment got "404 Not Found". How to find the correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

What Are The Correct Gray OS X Discs For This Imac?

I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
There has to be a serial or model number right? I have Leopard installed on it and I missing having the DVD player so could I connect the iMac to my PowerMac G5 using Target Disc Mode, and then install Panther or Tiger onto the iMac through it?

Liquidus wrote:
I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
The correct Mac OS restore discs are Mac OS X 10.1.2 and Mac OS 9.2.2. I have restore discs for a 600MHz Late 2001 iMac G3, which has the same identical software as the iMac G4. That part number for the disc set is 603-0372.
For the second part of your question, you can install Panther or Tiger through Target Disc Mode from your PM G5.
-Brian

What are the correct domain settings @ Go Daddy?

I will set up a Mac Mini Lion Server using server assistant. I bought a domain name from Go Daddy. What are the correct domain (DNS, host) settings @ Go Daddy - need step by step guide; thanks in advance.

I do not fully understand how the PTR pointer works
PTRs map IP addresses back to hostnames - also known as 'reverse DNS'.
The way it works is that when you (or any client) looks up an IP address they first query the root servers that maintain a map of the main IP address allocations. You then query the server that's authoritative for the IP address in question. That server may respond, or may further delegate responsibility to another server.
As an illustration, imagine a company - MegaISP - who's been allocated a large block of IP addresses - say 1.0.0.0 through 1.255.255.255. As an ISP they provide access service in all 50 states so they may further subdivide their network into chunks and delegate control of each chunk to a different server, e.g. 1.1.0.0 - 1.1.255.255 -> CA, 1.2.0.0 - 1.2.255.255 -> NY, etc.
Now you, as a customer of MegaISP, connect to their server and are allocated a dynamic address from the 1.2.0.0 - 1.2.255.255 subnet - let's say 1.2.3.4
When you perform a reverse lookup on 1.2.3.4 your query first goes to the root servers which say something like 'hey, those IPs are owned by MegaISP's DNS servers, so go ask them'. You then query MegaISP's main servers which then say 'hey, that IP is somewhere in the New York subnet, so go query the New York DNS server. Your query then goes to MegaISP's New York server that replies something like 'host-1-2-3-4.ny.megaisp.net' and that' your reverse lookup.
(of course, this is greatly simplified, and the whole process takes a fraction of a second, but hopefully you get the idea).
The problem you now have is that MegaISP have no idea what services you're running on your connection, so they just return a generic response (e.g. host-1-2-3-4.ny.megaisp.net) and not something that relates to your domain (e.g. www.yourdomain.net). Nobody knows to ask your DNS server what hostname your IP address should map to.
In order for that last step, MegaISP either have to change their DNS servers to map your IP address to your domain name rather than the generic hostname, or they have to further delegate your IP address's lookup to your own server (i.e. add another link in the chain - like 'hey, that IP address is delegated to yourdomain.net, so go ask their server').
Most ISPs are happy to either delegate or have a custom entry for your domain, but not on dynamic or residential-grade connections - it's not worth the time and effort to keep it up to date as your IP address changes, which is why it's typically only something that comes with business-grade services.
and what limitations this will lead to
Any service that relies on valid reverse DNS is doomed to fail. For the most part, http doesn't matter/care, but don't expect to run a mail server or certain other services.

Paypal URL redirects but adds in the word amp after the &. How to get Muse to redirect to the correct URL

Hi there. I have used the paypal email URL in my form submit buttons, but when testing them live, the URL changes and adds in the word amp after the &: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KZUPJMDWGTUNY. It’s in my Adobe Muse form as this: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KZUPJMDWGTUNY. How do I get Muse to redirect to the correct URL?

When I pasted the link in the first post it took out the &amp so I'll retype what Muse is doing ... it's changing he URL to ... https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=KZUPJMDWGTUNY which brings up an error page.

On my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ?

on my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ? I am never sure the back up is working. It checked the owner manual but did not find what I need. Can someone give mt the step by step "how to" help so That I know everything is completely backed up to i cloud
thank you
olefuzz0115

Are you plugging in every night, locking the iPad and connected to WiFi? Are you meeting all three requirements?
Well that is what I do and it works for me because I can see the next day that the new backup shows in Settings>iCloud>Storage and Backup>Backup Now. If you look at my screenshot - you will see that I experimented to make sure that it would work. I responded on July 3 at 12:24 PM when you posted. Then I locked the iPad, plugged it in and waited for about 30 minutes before I unlocked the iPad to see if it backed up. The screenshot shows the backup was completed at 12:44 PM on July 3.
I also backup with iTunes and I almost never auto backup. I just initate the back up on my own. But the instructions that I posted are right from the settings. You can read it for yourself in the screenshot.
You do have to wait for at least 24 hours before the next backup will take place, but if you are getting a message that you haven't backed up a week later, I can't explain that.
Dont trust that message. Look and see what the date of the last backup was. That's the only way to know for sure.

What is the correct URL to connect to my Sqlbase DB

Similar Messages

Maybe you are looking for