What is the difference between non-blocking and 1:1 oversubscribed?

Could someone tell me what the difference is between a non-blocked port and one with 1:1 oversubscription?

"non-blocking port" and "1:1 oversubscription" are the same. It's also the same when you are saying "line rate".

Similar Messages

What is the difference between buffered acquisition and non buffered acquisition?

What is the difference between buffered acquisition and non buffered acquisition? How will I decide whether I want buffered acquisition or non buffered acquisition?

I will also add that with non buffered acquisition you have to use software timing. Windows is not a real time OS, so the the timing is not accurate. But if you use buffered acquisition the timing will be controlled with an accurate internal clock on the Daq unit. I think non buffered acquisition should be avoided in most cases.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What is the difference between Category Mgmt and Spend Analysis?

Hi Friends
What is the difference between Category Mgmt and Spend Analysis?
Regards
Chinna Krishna

Hi Chinna
Here are my two cents on this questions
1. Catagory Management : It pertains to all sourcing activities that a purchasing group does for a specific catagory of items ( say tyres, bearings, etc. in automobile industry scenario OR steel sheets, electric motor, etc. in consumer durables industry scenario) in order to meet companies strategic goals like cost, quality, delivery and new product introduction. It also involves the strategic sourcing piece for that category. Typically it can include following activities for a category which is being managed
- Identifying current and future business & technical requirements
- Constant vigilence and analysis of supply market for that category ( and also identifying new sources)
- Lauching various projects within category focussed on cost reduction, quality improvement, delivery improvement. This may include some of activities like supplier analysis. RFx, Reverse auctions, contract negotiation, etc.
- Monitoring the category specific supplier performance
Category Management team typically consists of cross functional team and it is iterative process (continuous improvement).
Category Management in covered to some extent in E-Sourcing application and its analysis is covered in Spend Analytics application. Fully blown category management is on road map of SAP but none of the current functionalities addresses it fully.
2. Spend Analysis: This involves analysis of the spend at highest level of organization. To improve the data quality, it typically involves spend data standardization & enrichment, supplier normalization and spend categorization. Once you have clean data, one can slice and dice the data to gain insight into the spend and identify opportunities for launching the various initiatives focussed on cost, quality and delivery.
SAP Spend Analytics application covers this spend analysis capability.
Its a long answer and hope it helps you.
Bhushan

What is the difference between standard,sorted and hash table

<b>can anyone say what is the difference between standard,sorted and hash tabl</b>

Hi,
Standard Tables:
Standard tables have a linear index. You can access them using either the index or the key. If you use the key, the response time is in linear relationship to the number of table entries. The key of a standard table is always non-unique, and you may not include any specification for the uniqueness in the table definition.
This table type is particularly appropriate if you want to address individual table entries using the index. This is the quickest way to access table entries. To fill a standard table, append lines using the (APPEND) statement. You should read, modify and delete lines by referring to the index (INDEX option with the relevant ABAP command). The response time for accessing a standard table is in linear relation to the number of table entries. If you need to use key access, standard tables are appropriate if you can fill and process the table in separate steps. For example, you can fill a standard table by appending records and then sort it. If you then use key access with the binary search option (BINARY), the response time is in logarithmic relation to
the number of table entries.
Sorted Tables:
Sorted tables are always saved correctly sorted by key. They also have a linear key, and, like standard tables, you can access them using either the table index or the key. When you use the key, the response time is in logarithmic relationship to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique, or non-unique, and you must specify either UNIQUE or NON-UNIQUE in the table definition. Standard tables and sorted tables both belong to the generic group index tables.
This table type is particularly suitable if you want the table to be sorted while you are still adding entries to it. You fill the table using the (INSERT) statement, according to the sort sequence defined in the table key. Table entries that do not fit are recognised before they are inserted. The response time for access using the key is in logarithmic relation to the number of
table entries, since the system automatically uses a binary search. Sorted tables are appropriate for partially sequential processing in a LOOP, as long as the WHERE condition contains the beginning of the table key.
Hashed Tables:
Hashes tables have no internal linear index. You can only access hashed tables by specifying the key. The response time is constant, regardless of the number of table entries, since the search uses a hash algorithm. The key of a hashed table must be unique, and you must specify UNIQUE in the table definition.
This table type is particularly suitable if you want mainly to use key access for table entries. You cannot access hashed tables using the index. When you use key access, the response time remains constant, regardless of the number of table entries. As with database tables, the key of a hashed table is always unique. Hashed tables are therefore a useful way of constructing and
using internal tables that are similar to database tables.
Regards,
Ferry Lianto

What is the difference between live auction and bid invitation

hi friends
what is the difference between live auction and bid invitation
thanks
regards
vinaykrishna

Source SAP.
BI including Price and non-price variables but LAC Bidding is based on price only.
BI - Longer response time for Bidders (from days to week) but Bidding short bidding windows (Hours).
BI - Bidders sees no information on competitors' bid but in LAC Rank,Best Bid , and next bid can be displayed on real time
BI-Well suited for large variety of goods and services , including ram waterials, services and projects but LAC More suited for commodities or goods and services with standard attributes that vary only slightly from supplier to supplier.
BI -Sourcing is based on value propositions (.eg. High Quality ,fast deliveries) rather than price but LAC market dynamics of auctions work best when buyer/seller relationship is loosele- coupled.
BR
Raman

What is the difference between full checkpoint and incremental checkpoint?

What is the difference between full checkpoint and incremental checkpoint?
And what is checkpoint queue?
Can someone clarify these concepts?
Thanks!

Hi,
there are different types of checkpoints:
- Full checkpoint:
=> DBWR writes all dirty buffers from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
-- can be triggered by different events, like a logswitch, a manual checkpoint (alter system ..), a shutdown and so on
This is the setup point for SMON for a crash recovery.
- Partial checkpoint:
=> DBWR writes all dirty buffers of a singel tablespace from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
-- can e triggered by an ALTER TABLESPACE OFFLINE, ALTER TABLESPACE READ ONLY, ALTER TABLESPACE BEGIN BACKUP statement.
Incremental checkpoint:
number to all file headers and the controlfile.
-- can be triggered by different events, like a logswitch, a manual checkpoint (alter system ..), a shutdown and so on
- Partial checkpoint:
=> DBWR writes all dirty buffers of a single tablespace from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
-- frequency is determined by FAST_START_MTTR_TARGET parameter (new feature to Oracle 9i), with wich you can specify a time in seconds which SMON is allowed to take maximal for a Crash Recovery until the database must be open again.
Dapending on the system you have SMON must calculate the maximum number of Redolog-blocks which it can manage to recover in the specified number of seconds. It will then create so called incremental checkpoints which will be tracked in the so called checkpoint queue in memory.
FAST_START_MTTR_TARGET is auto-tuned in Oracle 10g and Oracle tries to manage (incremental) checkpoint in a fashion that a minimum of I/Os are caused and a minimum time for crash recovery is needed.
If you set LOG_CHECKPOINTS_TO_ALERT to TRUE you will find checkpoint information in the alertSID.log file. You will see FULL and INCREMENTAL checkpoints then.
Hope this clarifies your question,
Lutz Hartmann

What is the difference between packet-speaker and packet-publisher?

What is the difference between packet-speaker and packet-publisher in Coherence?

I believe that both are responsible for sending packets on the network. The packet speaker is used by the packet publisher when the publisher determines that there is a good chance that the send operation will block. By allowing the speaker to handle the potentially blocking send operation the publisher can continue to process outgoing packets.

What is the difference between Commit, Commit_Form and Post ?

What is the difference between Commit, Commit_Form and Post ?

Commit() and commit_form() are exactly the same. The changes done into the databased blocks are made in the database select/insert/update and commited.
post() does the same, but without the last commit in the database (so that you can rollback).
Francois

What is the difference between "create set" and "create dynamic set"?

What is the difference between "create set" and "create dynamic set"?
we have a complete cube ready for production that was tested and working without any issues in non-r2. we found that some "create set" assignments don't work in R2. But when changed to from "create set" to "create dynamic set"?
they are working, However, not sure how it will impact other areas of the cube.

Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
could you try to use dynamic set or create statics set but with fixed member for example:
CREATE
SET CURRENTCUBE.[Prior Month] AS
[Date].[Date Key].&[20050723].PrevMember
, DISPLAY_FOLDER = 'Relative Period Sets';
Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
on below official link to get confirmation from Product Group:
https://connect.microsoft.com/SQLServer/
Thanks,
Raymond
Raymond Li - MSFT

What is the difference between access specifiers and access modifiers?

what is the difference between access specifiers and access modifiers? are they same? if not what is the difference.

Access Specifier are used to specifiy how the member variable ,methods or class to other classes.They are public ,private and protected.
Access Modifier:
1.Access
2.Non Access
Access:
public ,private,protected and default.
Non Access:
abstract,final,native,static,synchronized,transient,volatile and strictfp

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What are the differences between ECC5.0 and 6.0 new GL functionality

Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
Dharani

Dear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi.

What is the difference between non-blocking and 1:1 oversubscribed?

Similar Messages

Maybe you are looking for