What is the expected behavior of IDM, if crashes during Workflow processing
hi, We have a Task to nightly export of all the IDM users. We noticed that if the server dies halfway through the process, the Task is not picked off from where it left. How do we deal with such situations. We wanted it to restart the export process and not wait for next nights schedule. Is there a programmatic way to do it in IDM?
It should show "X unsent messages" at the bottom of the mail app.
It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
Once you re connect to a network, it should just send the messages
Similar Messages
-
What is the expected behavior in a zone after adding a new static route in Solaris 10....
Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.comGreg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/
-
What is the expected behavior in iOS 7.x when hitting send on an email with no wifi or cell connection being present? Also is the behavior designed to be any different if the user intiates airplane mode ahead of time?
We have a couple of users that claim in this situation the email will act like it sent in which they expect it will go out once a network connection is restored. They then come to find the recipient never recieved it and that it does not show in sent email. Its merely lost and they claim its also not in drafts.
I would hope the expected behavior would be that it would either retry sending once network connectivity is restored or at least warn that it needs to be saved as a draft since no connection is present.It should show "X unsent messages" at the bottom of the mail app.
It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
Once you re connect to a network, it should just send the messages -
If JailbreakDetectionRequirements are set on a PlayRight, what is the expected outcome on a PC/Mac?
I'm curious if I need to make our license server look at the incoming client information and conditionally turn this on.
If a license with jail break detection turned on is sent to a PC or Mac, what is the expected behavior? I assume that you'd allow playback since those devices can't really be 'jailbroken', but it would be great to have some clarification.The jailbreak detection won't do anything for PC and Mac. It's just for mobile devices, like iOS and Android devices.
Thanks,
-- Hiroshi -
What is the expected Passbook behavior?
What should Passbook do when you open it?
I do not get errors like I saw in some of the other posts, but given all the marketing it received, I am left wondering if it works properly.
Perhaps nothing happens until I actually make a ticket purchase or store a coupon?
Here is what I see when I try to use it:
1) I open the Passbook app.
2) I see an info page that basically just describes what Passbook is for, and has an "App Store" button at the bottom.
3) I click "App Store" and see a handful of Apps, of which I've downloaded 4-5.
** The apps just installed on to my phone like any other app... nothing obvious stands out as Passbook specific.
4) I go back to Passbook, and it looks exactly the same as before... an info page with an App Store button.
Alright, well I assume it's not as broken as it feels and that purchasing a ticket will cause something to change in the Passbook UI.
So am I right about that?
I really think there should be a help button, or that I should be able to slide over to some explanation page describing the expected behavior.
Or maybe something simple like: "You have no tickets", to clue me into what the deal is.
(unless it really is just broken)
-BrianThanks, I downloaded the Target App to test out your suggestion and it worked like you described.
The other apps I installed did not have coupons or anything for me too see an "Add to Passbok" option and understand the intent. -
What is the expected release date for Adobe Media Server 5.0 and Adobe Access 4.0 ?
What is the expected release date for Adobe Media Server 5.0 and Adobe Access 4.0 ?
you should be on the same subnet as the server in order to receive multicast.
-
What is the expected battery life of a macbook air?
What is the expected battery life in hours of a Macbook Air? I have a 2012 model and it is only about 1 1/2 hours.
About 1,000 full charge cycles. Mac notebooks- Determining battery cycle count - Apple Support.
-
what's the correct behavior in Win8.1/Win10, when VOIP is conecting -> then press Power to enter into connect standby? does VOIP need disconnect after press power key?
test steps is :
1). Start VOIP call with Metro Skype in win8.1 or win10.
2). System enter Connect standby (by press power button)during VOIP establish by Skype or LYNC.
does VOIP need disconnect or still in connection? what's the correct behavior in win8.1/win10.Hi wangjingz,
From your post, it would be better ask this to the WDK and driver development forum. This forum discuss application compatibility testing, common compatibility issues, and best practices for creating Windows-based applications. So your post is off
topic here. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Laserjet 42x0/43x0 printers: what is the expected life span by page count for these models?
Laserjet 42x0/43x0 printers: what is the expected life span by page count for these models?
The document here lists the monthly duty cycle at 125,000 to 200,000 pages per month and the devices typically have a one year warranty. Based on this I would expect at least 1.4 - 2.4 million pages for printer life with appropriate maintenance.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
What is the expected service life of our HP Color LaserJet 2840?
What is the expected service life of our HP Color LaserJet 2840? Currently it's been running well however I'd like to know how long we should expect it to operate.
We intend to use this printer as long as it's serviceable before we consider a replacement machine. Please, no sales answers!
Thank you in advance for your reply.Has your son been calibrating the battery per the user manual schedule? Has he been using the computer properly? According to the user manual it states in part:"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
MacBook Pro: Care, Use, and Safety Information
"Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."
Apple notebook batteries – maintenance and troubleshooting
http://support.apple.com/kb/HT1446 Apple Portables: Tips for maximizing your battery charge
http://support.apple.com/kb/HT1490 Apple Portables: Calibrating your computer's battery for best performance
Maximize the battery life -
What is the expected useful life of a new iMac?
What is the expected useful life of a new iMac?
There are few if any life-limited components in new Macs.
In very approximate terms Macs become unsupported after about five years and functionally obsolete in about seven years. This has held true since about 1984 (my first Mac still works). Buy as much RAM as you can afford. -
What is the BEST practice - use BO or Java Object in process as webservice
Hi All,
I have my BP published as web service. I have defined My process input & output as BOs. My BP talks to DB through DAO layer(written in JAVA) which has Java objects. So I have BO as well as java Objects. Since I am collecting user input in BO, I have to assign individual values contained in BO to Java object's fields.
I want to reduce this extra headache & want to use either of BO or Java object.I want to know What is the best practice - use BO or Java object as process input. If it is BO,how I can reuse BOs in Java?
Thanks in advance.
Thanks,
Sujata P. GalindeHi Mark,
Thanks for your response. I also wanted to use java object only. When I use java object as process input argument..it is fine. But when I try to create Process web service, I am getting compilation error - "data type not supported".....
To get rid of this error, I tried to use heir (BO inheriting from java class). But while invoking process as web service, it is not asking for fields that are inherited from java class.
Then I created Business Object with a field of type java class... This also is not working. While sending request, it is giving an error that - field type for fields from java class not found.
Conclusion - not able to use java object as process(exposed as web service) input argument .
What is the Best & feasible way to accomplist the task - Process using DAO in Java & exposed as web service.
Thanks & Regards,
Sujata -
How to get the Asset's current step under a specific workflow process via API?
Everyone,
Is there a way to get the asset's current step for a specific workflow process by the WebCenter Sites API? We are showing out the asset created within the WebCenter Sites in another application via its API. We would like some actions get to be done once determined assets went into a specific step of a workflow process. Any suggestions are welcomed.
Regards!Here is some information from the FDK Programmer's guide page 115:
IMPORTANT: A valid text range can span multiple paragraphs, subcolumns, or text frames.
It cant span multiple flows, footnotes, table cells, or text lines.
It is possible for a document to have no text selection or insertion point at all. This can occur in
the following circumstances:
● One or more graphic objects in the document are selected
● One or more entire table cells in the document are selected
● There is no selection of any type in the document
So, I did select one or more entire table cells in the document in my first test. It's logical that the result was not like expected.
But selecting one or more entire table cells is a crucial requirement for my plugin, is there anyway to get things straight?
Simply put, I want to enable users to select one or more table cells in the document, and I want to get the object handles of the first cell and the last cell through Framemaker API calls. How?
Many thanks in advance!
Best Regards,
Ellen N. Zhao -
Oracle says "Performance degradation is the expected behavior"
Guys,
Yes, you read the title correct.
We were testing our app on a new Oracle 11g 3 node RAC (with Netapp storage) / Apex 3.1.2 and noticed poor performance. Since the environment is completely new we thought we did something wrong in the configuration.
We also opened a SR with Oracle and provided them all the data for diagnostics.
(I will post the Oracle's response in the subsequent posts since I ran into issue with this forum. I don't know why nothing is working for me today)
Not only that, Oracle said, the following query is causing the system slowdown and tune this query (Again in seperate post).
Any help will be appreciated on tuning this query
Thanks
Balaji Chellappa
Note: I am posting this thread in pieces since this forum doesn't let me post in one shot.
{color:#0000ff}Hi,
It looks like you may be running into Bug 4755226, which unfortunately is nto really a bug as it is expected behavior.
The issue appears to be when using the owa commands.
You will need to determine what your code is doing at the time that the issue is occurring, then the {color:#ff0000}*code will need to be modified so it is not making as many owa calls*{color}
Please review the above as well as Bug 4755226 and let me know your status.
Thanks
{color}[{color:#0000ff}https://metalink.oracle.com/CSP/main/article?cmd=show&type=BUG&id=4755226{color}|https://metalink.oracle.com/CSP/main/article?cmd=show&type=BUG&id=4755226]
{color:#0000ff}-----
The following procedure is doing a high number of GET requests causing system slowdown.
QUESTION
=========
1) Are you familiar with this procedure?
SQL ID: cp9jr3hp1jupk
declare rc__ number; simple_list__ owa_util.vc_arr; complex_list__ owa_util.vc_arr; begin owa.init_cgi_env(:n__, :nm__, :v__); htp.HTBUF_LEN := 63; null; null; simple_list__(1) := 'sys.%'; simple_list__(2) := 'dbms\_%'; simple_list__(3) := 'utl\_%'; simple_list__(4) := 'owa\_%'; simple_list__(5) := 'owa.%'; simple_list__(6) := 'htp.%'; simple_list__(7) := 'htf.%'; if ((wwv_flow_epg_include_modules.authorize('f') = false) or (owa_match.match_pattern(p_string => 'f' /* */, p_simple_pattern => simple_list__ , p_complex_pattern => complex_list__ , p_use_special_chars => false))) then rc__ := 2; else null; null; f(p=>:p); if (wpg_docload.is_file_download) then rc__ := 1; wpg_docload.get_download_file(:doc_info); null; null; null; commit; else rc__ := 0; null; null; null; commit; owa.get_page(:data__, :ndata__); end if; end if; :rc__ := rc__; end;
Thanks{color}Guys,
We had a similar issue with our system, where during peak periods our CPU is running at 100% most of the time. Our DBA isolated the problem to the SQL below:
declare
rc__ number;
simple_list__ owa_util.vc_arr;
complex_list__ owa_util.vc_arr;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 255;
null;
null;
simple_list__(1) := 'sys.%';
simple_list__(2) := 'dbms\_%';
simple_list__(3) := 'utl\_%';
simple_list__(4) := 'owa\_%';
simple_list__(5) := 'owa.%';
simple_list__(6) := 'htp.%';
simple_list__(7) := 'htf.%';
simple_list__(8) := 'wpg_docload.%';
if ((owa_match.match_pattern('f', simple_list__, complex_list__, true))) then
rc__ := 2;
else
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
end if;
:rc__ := rc__;
end;
The block of code above was getting executed too many times. He reversed engineered the process in order to find out how the block above was getting generated and executed. He found out that it has to do with references to "Shared Images" in the "Page Template" of ApEx. When you reference images, js script or css files in your stylesheet using the #WORKSPACE_IMAGES# subtitution string, #WORKSPACE_IMAGES# actually translates to:
wwv_flow_file_mgr.get_file?p_security_group_id=923024072426648&p_fname=[FILE_NAME]
Every reference to an image, css, js, etc from the "Shared Repository" in ApEx is a database call. We optimized our application by removing reference to #WORKSPACE_IMAGES# (by moving images, css, js out of the database and into the web server) in our page tempates and the performance boost was amazing!
For more information about our experience, visit [Improving Performance of Your Oracle Application Express Software|http://www.web-backlinks.com/blog/index.php/2009/02/04/improving-performance-of-your-oracle-application-express-software/].
Cheers,
Ariel -
What should the"default behavior" be for WiFi network connections?
I Have been able to at least temporarily fix the plethora of problems encountered after downloading Mountain Lion to my 2009 17" MBP just ten days ago. Thanks to the time and effort of so many posters that are much more savvy than me, I successfully executed the steps suggested in many of the posts and with good results. It surely beats running down to the Apple store and being told that I am the only one with a problem.
Okay, I've realized that I don't really know what the default behavior of the WiFi network connection should be?
Specifically:
Should the Wi-Fi drop down in Network always be" looking for networks", even though I am obviously on my Network?
Should the Wi-Fi be connected at all times even when your computer is in sleep mode- or deep sleep mode? There have been so many problems with Wi-Fi dropping off,slow or hanging loads, etc.
I unchecked "ask to join networks, in Network preferences thinking it might stop looking for networks when it doesn't need to because I'm already on mine. I do see my neighbors (four neighbors) in the drop down in Network.
How do you get into Time Capsule's settings, to check speeds, especially ping? What should the ideal settings be?
How do you know if your DHCP license is renewed? I've heard that feature isn't working and may be the culprit to some of the Wi-Fi problems.
I'll look forward to your help in understanding more about this. I've been in the support area a lot lately, I've read plenty of definitions, and explanations of the different options to choose from in Apple's support area, but nowhere have I seen anything that explains what the default behavior should be or perform like.
Thanks, as always.Generally, you don't want to tweak the wifi settings. It pretty much takes care of itself. The caveat to that is, of course, if you're experiencing problems.
The 'looking for networks' behaviour only happens when you log in, wake the mac from sleep OR when you click on the wifi icon. You clicking on it tells the mac "I want to see what networks are available" - so it does a scan for you to check to see if any new networks have appeared since you last clicked on it (or woke/logged in). In short, if you don't want it to look for new networks, don't click on the icon!
Unchecking the 'ask to join networks' option only applies when your mac detects a new network (such as when it wakes) that you haven't already authorised; it'll ask you to confirm whether you want to join it or not. Otherwise, if the network is open it'll join automatically. You should keep this selected if you travel around with your Mac. It's a good idea to know what network you're on before you start plugging in passwords or typing other things into the mac.
There is a utility that you can use for ping and traceroute called 'Network Utility'. Click on the Spotlight icon in the top right of your screen and type "Network' and you should see it at the top of the list. Hit 'return' to open it.
DHCP licences are normally renewed automatically by your router every 24 hours. Again, there's no reason to be messing about with that unless you're experiencing problems.
If you're experiencing wifi dropout, let us know, and we'll make some suggestions, but if you're not, you're best leaving your mac to manage the background processes. It knows what it's doing!
Message was edited by: softwater
Maybe you are looking for
-
AdobeCreatePDFDesktopPrinter is not working
hi all, I recently posted this into another thread which is quite old so this again in a new one. (http://forums.adobe.com/thread/962899) we executed all the suggested steps from this and the mentioned threads to get along with it and make the printe
-
Windows media player does not recognize new CD when changing CDs in drive
I have a ThinkPad R61i that was purchased with a preinstalled downgrade from Vista to XP professional. Whenever I rip CDs using the built in DVD/CD player/burner, WMP doesn't recognize a new cd when I put one in. I am running WMP 11 for XP. The fi
-
The following serial numbers are invalid
I upgraded lookout to 6.7.1 and my old serial number will not work till NI ships the new disk. I really need this up and running yesterday! The evaluation program won't let me run past 2 hours because I have more than 50 I/O connections. When I call
-
Lightroom 2.2, Mac Pro, Mac OS 10.5.5, 2.8 Quad-Core Intel, 6GB RAM I went to use the "recently modified" Smart Collection that comes with Lightroom 2, and changed the "Edit Date is in the last" days value from the default (which I think was 2) to 7.
-
Propogating Only the required data to destinition
We are planning to use replication using streams. We have following scenario 'Site M' is a master site 'Site A' and 'Site B' are the secondary sites. The updations on 'Site M' are to be propogated to site A/Site B. Only the records which are ment for