What is the expected behavior in iOS 7 when hitting send on an email with no wifi or cell connection being present?
What is the expected behavior in iOS 7.x when hitting send on an email with no wifi or cell connection being present? Also is the behavior designed to be any different if the user intiates airplane mode ahead of time?
We have a couple of users that claim in this situation the email will act like it sent in which they expect it will go out once a network connection is restored. They then come to find the recipient never recieved it and that it does not show in sent email. Its merely lost and they claim its also not in drafts.
I would hope the expected behavior would be that it would either retry sending once network connectivity is restored or at least warn that it needs to be saved as a draft since no connection is present.
It should show "X unsent messages" at the bottom of the mail app.
It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
Once you re connect to a network, it should just send the messages
Similar Messages
-
Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.comGreg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/
-
What are the accessories do i get when i buy Mac book pro with retina display 13 inches?
i got mac book pro with retina display 13'' 20 days ago. i got charger and extension cable for charger only. what are the accessories do i get when i buy Mac book pro with retina display 13 inches?
MacBook Pro with 13-inch Retina display
60W MagSafe 2 Power Adapter, AC wall plug, and power cord -
What is the expected behavior of IDM, if crashes during Workflow processing
hi, We have a Task to nightly export of all the IDM users. We noticed that if the server dies halfway through the process, the Task is not picked off from where it left. How do we deal with such situations. We wanted it to restart the export process and not wait for next nights schedule. Is there a programmatic way to do it in IDM?
It should show "X unsent messages" at the bottom of the mail app.
It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
Once you re connect to a network, it should just send the messages -
I have gone into account settings and changed my name from "Front Desk" to my business name, but when I send an email out the recipient is still seeing Front Desk. Have I missed something basic?
Thunderbird Menu > Tools > Account Settings
*Choose the Email
**Dafault Identity > Your Name (Change it)
Check the attached image
For more
*https://support.mozilla.org/en-US/kb/configuration-options-accounts -
What is the default Behavior of crawler , when upgarding 5.0.5 to 6.1
Hi ,
It will re crawler the all the cards when changing to old file server to new file server?
please reply , if anybody know the answer.
Thanks
DheerajAre you referring to cards created by the Windows File Crawler?
If so, and you are moving the source files to a new server, then the crawler will delete the objects and then recreate them as new cards with new card ids by default. With customizations you can workaround this to keep the same card ids and prevent recrawling.
What are you upgrading, the portal suite?
If so, the portal will recrawl and reindex all items during a portal upgrade. -
I'm curious if I need to make our license server look at the incoming client information and conditionally turn this on.
If a license with jail break detection turned on is sent to a PC or Mac, what is the expected behavior? I assume that you'd allow playback since those devices can't really be 'jailbroken', but it would be great to have some clarification.The jailbreak detection won't do anything for PC and Mac. It's just for mobile devices, like iOS and Android devices.
Thanks,
-- Hiroshi -
I lost the outgoing sound when hitting send. How to retrieve?
I lost the sound of outgoing mail when hitting Send and would like to restore it. How?
Thanks.
RayMail >Preferences > General > Play Sounds for Other Mail Actions
Make sure this is checked. -
What is the expected Passbook behavior?
What should Passbook do when you open it?
I do not get errors like I saw in some of the other posts, but given all the marketing it received, I am left wondering if it works properly.
Perhaps nothing happens until I actually make a ticket purchase or store a coupon?
Here is what I see when I try to use it:
1) I open the Passbook app.
2) I see an info page that basically just describes what Passbook is for, and has an "App Store" button at the bottom.
3) I click "App Store" and see a handful of Apps, of which I've downloaded 4-5.
** The apps just installed on to my phone like any other app... nothing obvious stands out as Passbook specific.
4) I go back to Passbook, and it looks exactly the same as before... an info page with an App Store button.
Alright, well I assume it's not as broken as it feels and that purchasing a ticket will cause something to change in the Passbook UI.
So am I right about that?
I really think there should be a help button, or that I should be able to slide over to some explanation page describing the expected behavior.
Or maybe something simple like: "You have no tickets", to clue me into what the deal is.
(unless it really is just broken)
-BrianThanks, I downloaded the Target App to test out your suggestion and it worked like you described.
The other apps I installed did not have coupons or anything for me too see an "Add to Passbok" option and understand the intent. -
what's the correct behavior in Win8.1/Win10, when VOIP is conecting -> then press Power to enter into connect standby? does VOIP need disconnect after press power key?
test steps is :
1). Start VOIP call with Metro Skype in win8.1 or win10.
2). System enter Connect standby (by press power button)during VOIP establish by Skype or LYNC.
does VOIP need disconnect or still in connection? what's the correct behavior in win8.1/win10.Hi wangjingz,
From your post, it would be better ask this to the WDK and driver development forum. This forum discuss application compatibility testing, common compatibility issues, and best practices for creating Windows-based applications. So your post is off
topic here. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
TS3694 What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?
What is the cause of "error 1015" when you're trying to restore and update an iphone 3gs? My iphone is currently in recovery mode and can not get out of it. All the information about my iphone shown on itunes is only marked as- N/A. How can I get my iphone out of recovery mode and get it to recover and update?
Thank you,
MacQuestioner3http://support.apple.com/kb/TS3694#error1015, which says:
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words, either your phone is jailbroken and you are sadly out of luck or you are trying to downgrade iOS. -
What is the expected service life of our HP Color LaserJet 2840?
What is the expected service life of our HP Color LaserJet 2840? Currently it's been running well however I'd like to know how long we should expect it to operate.
We intend to use this printer as long as it's serviceable before we consider a replacement machine. Please, no sales answers!
Thank you in advance for your reply.Has your son been calibrating the battery per the user manual schedule? Has he been using the computer properly? According to the user manual it states in part:"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
MacBook Pro: Care, Use, and Safety Information
"Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."
Apple notebook batteries – maintenance and troubleshooting
http://support.apple.com/kb/HT1446 Apple Portables: Tips for maximizing your battery charge
http://support.apple.com/kb/HT1490 Apple Portables: Calibrating your computer's battery for best performance
Maximize the battery life -
What is the value of sy-ucomm when tab is pressed
Hi Experts,
what is the value of sy-ucomm when tab is pressed or is there any way to detect or capture the pressing of tab as we do for the enter. if so kindly help
please advance thanksHi Samraj,
Consider this sample code, here based on user commands the code calls the Tab's.
Define
Data : pressed_tab LIKE sy-ucomm VALUE c_ticket-tab1,
IN PBO
MODULE ticket_active_tab_set.
CALL SUBSCREEN ticket_sca
INCLUDING g_ticket-prog g_ticket-subscreen.
MODULE ticket_active_tab_set OUTPUT.
ticket-activetab = pressed_tab.
CASE pressed_tab.
WHEN c_ticket-tab1.
g_ticket-subscreen = '0204'.
WHEN c_ticket-tab2.
g_ticket-subscreen = '0205'.
WHEN c_ticket-tab3.
g_ticket-subscreen = '0206'.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. " TICKET_ACTIVE_TAB_SET OUTPUT
Thanks,
Reward If helpful. -
What does the "conversion error" I get when converting a pdf file to Microsoft word?
What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?
Adobe reader with export to PDF
Sent from my iPhone 5
Marty Kennedy -
What are the main things to do when optimizing the performance of Java App
what are the main things to do when optimizing the performance of Java App
what are the main things to do when optimizing the performance of Java App
Maybe you are looking for
-
Safari shuts down when trying to print, I'm using 10.6.8
Safari crashes when I try to print, using 10.6.8.
-
Which MacBook Pro ? Who can help ?
Who can tell me which MacBook Pro is best to work with ProTools 10 and Photoshop CS6, without which the processor is fully utilized ? Thank you for your reply
-
Hi, I have some users set up as Team Room members who can create tasks that aren't visible to the person they sent the task to and aren't visible in their own tracking task list. The tasks are being created as I can see them appearing in Content Adm
-
Does FF6 support Firebug 1.7.3?
-
EP 6.0 Homogeneous system copy
Hi I did EP 6.0 SP 20 homogeneous system copy from Production to Sandbox. Sandbox is now connected to all the production backend system since it is a copy of the production system. Is there a way to copy just the systems objects/system landscape,